From 34b31da486a5e4eda9ff548ebf6dc3adc167bd0c Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 31 Aug 2015 15:56:48 +0200 Subject: [PATCH] phy: fixed_phy: Set supported speed in phydev Set the supported field of the phydev to indicate the speed features of the phy. If the phy is never attached to a netdev, but used in an adjust_link() function, the speed will be incorrectly evaluated to 10/half rather than the correct speed/duplex. Signed-off-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index ce46428ff21f..2f9457f05a2e 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -305,6 +305,18 @@ struct phy_device *fixed_phy_register(unsigned int irq, phy->dev.of_node = np; phy->is_pseudo_fixed_link = true; + switch (status->speed) { + case SPEED_1000: + phy->supported = PHY_1000BT_FEATURES; + break; + case SPEED_100: + phy->supported = PHY_100BT_FEATURES; + break; + case SPEED_10: + default: + phy->supported = PHY_10BT_FEATURES; + } + ret = phy_device_register(phy); if (ret) { phy_device_free(phy); -- 2.39.5