From 35a4803fecff840c2fa3937fb692cbf2e46d0927 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 1 Apr 2013 21:20:02 -0700 Subject: [PATCH] ARM: shmobile: bockw: add SMSC ethernet support This patch adds SMSC ethernet support on Bock-W Bock-W SMSC needs FPGA settings which enables interrupt. This patch does it on bockw_init() function. As notes for future, this FPGA settings should be updated, since this FPGA is using cascaded interrupt. Current code is assuming that this FPGA interrupt user is only SMSC. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/board-bockw.c | 38 ++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f7208bd72046..06da4d36bc7c 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -134,6 +134,7 @@ config MACH_BOCKW bool "BOCK-W platform" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB + select RENESAS_INTC_IRQPIN select USE_OF config MACH_MARZEN diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 56ab56ed5f59..38e5e50fb318 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -19,14 +19,52 @@ */ #include +#include #include +#include #include #include +static struct smsc911x_platform_config smsc911x_data = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource smsc911x_resources[] = { + DEFINE_RES_MEM(0x18300000, 0x1000), + DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ +}; + +#define IRQ0MR 0x30 static void __init bockw_init(void) { + void __iomem *fpga; + r8a7778_clock_init(); + r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + + fpga = ioremap_nocache(0x18200000, SZ_1M); + if (fpga) { + /* + * CAUTION + * + * IRQ0/1 is cascaded interrupt from FPGA. + * it should be cared in the future + * Now, it is assuming IRQ0 was used only from SMSC. + */ + u16 val = ioread16(fpga + IRQ0MR); + val &= ~(1 << 4); /* enable SMSC911x */ + iowrite16(val, fpga + IRQ0MR); + iounmap(fpga); + + platform_device_register_resndata( + &platform_bus, "smsc911x", -1, + smsc911x_resources, ARRAY_SIZE(smsc911x_resources), + &smsc911x_data, sizeof(smsc911x_data)); + } } static const char *bockw_boards_compat_dt[] __initdata = { -- 2.39.5