From 3687f641307eeff6f7fe31a88dc39db88e89238b Mon Sep 17 00:00:00 2001 From: Peter Stuge Date: Mon, 10 Oct 2011 03:34:54 +0200 Subject: [PATCH] USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: Peter Stuge Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f971c98d1438..effc43682dc0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -747,6 +747,8 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4d231ee8318b..571fa96b49c7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -54,6 +54,7 @@ /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 +#define LMI_LM3S_ICDI_BOARD_PID 0xbcda #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ -- 2.39.5