From 37e4ec96365a4b1179b994861e824e3c2fce32a1 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:54 +0100 Subject: [PATCH] MN10300: Make various interrupt priority settings configurable Make the settings of interrupt priorities used by various services configurable at run time. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 74 +++++++++++++++++++++++++++++ arch/mn10300/include/asm/irqflags.h | 8 +--- 2 files changed, 76 insertions(+), 6 deletions(-) diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index a1f334ce0a36..a0a16e6e4a4e 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -351,6 +351,80 @@ config MN10300_TTYSM2_CTS endmenu +menu "Interrupt request priority options" + +comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)" + +comment "____Non-maskable interrupt levels____" +comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial" + +config GDBSTUB_IRQ_LEVEL + int "GDBSTUB interrupt priority" + depends on GDBSTUB + range 0 1 if LINUX_CLI_LEVEL = 2 + range 0 2 if LINUX_CLI_LEVEL = 3 + range 0 3 if LINUX_CLI_LEVEL = 4 + range 0 4 if LINUX_CLI_LEVEL = 5 + range 0 5 if LINUX_CLI_LEVEL = 6 + default 0 + +comment "The following must be set to a higher priority than local_irq_disable()" + +config MN10300_SERIAL_IRQ_LEVEL + int "MN10300 on-chip serial interrupt priority" + depends on MN10300_TTYSM + range 1 1 if LINUX_CLI_LEVEL = 2 + range 1 2 if LINUX_CLI_LEVEL = 3 + range 1 3 if LINUX_CLI_LEVEL = 4 + range 1 4 if LINUX_CLI_LEVEL = 5 + range 1 5 if LINUX_CLI_LEVEL = 6 + default 1 + +comment "-" +comment "____Maskable interrupt levels____" + +config LINUX_CLI_LEVEL + int "The highest interrupt priority excluded by local_irq_disable() (2-6)" + range 2 6 + default 2 + help + local_irq_disable() doesn't actually disable maskable interrupts - + what it does is restrict the levels of interrupt which are permitted + (a lower level indicates a higher priority) by lowering the value in + EPSW.IM from 7. Any interrupt is permitted for which the level is + lower than EPSW.IM. + + Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip + serial DMA interrupts are allowed to interrupt normal disabled + sections. + +comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL" + +config TIMER_IRQ_LEVEL + int "Kernel timer interrupt priority" + range LINUX_CLI_LEVEL 6 + default 4 + +config PCI_IRQ_LEVEL + int "PCI interrupt priority" + depends on PCI + range LINUX_CLI_LEVEL 6 + default 5 + +config ETHERNET_IRQ_LEVEL + int "Ethernet interrupt priority" + depends on SMC91X || SMC911X || SMSC911X + range LINUX_CLI_LEVEL 6 + default 6 + +config EXT_SERIAL_IRQ_LEVEL + int "External serial port interrupt priority" + depends on SERIAL_8250 + range LINUX_CLI_LEVEL 6 + default 6 + +endmenu + source "mm/Kconfig" menu "Power management options" diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index f1b64b256060..b3ab2071354d 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -23,11 +23,7 @@ * - level 6 - timer interrupt * - "enabled": run in IM7 */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif +#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) #ifndef __ASSEMBLY__ @@ -94,7 +90,7 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; + return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); } static inline bool arch_irqs_disabled(void) -- 2.39.5