From 38f539a608c9a3b40b30f1892bd5f9a38f4e5ffe Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 20 Jan 2009 12:09:06 +0800 Subject: [PATCH] [ARM] pxa: move common GPIO handling code into plat-pxa 1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in moved into , new processors should implement its own , provide the following required definitions and '#include ' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/include/mach/gpio.h | 32 +------------ arch/arm/plat-pxa/Makefile | 1 + arch/arm/{mach-pxa => plat-pxa}/gpio.c | 30 +------------ arch/arm/plat-pxa/include/plat/gpio.h | 62 ++++++++++++++++++++++++++ 5 files changed, 66 insertions(+), 61 deletions(-) rename arch/arm/{mach-pxa => plat-pxa}/gpio.c (89%) create mode 100644 arch/arm/plat-pxa/include/plat/gpio.h diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 70b46570c5cf..c80e1bac4945 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o \ - time.o gpio.o reset.o + time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o ifeq ($(CONFIG_CPU_FREQ),y) diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index c72c89a2285e..b024a8b37439 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,40 +99,12 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - #define NR_BUILTIN_GPIO 128 -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else { - __gpio_set_value(gpio, value); - } -} - -#define gpio_cansleep __gpio_cansleep #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) #define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, * as well as their Alternate Function value being '1' for GPIO in GAFRx. @@ -165,7 +137,5 @@ static inline int __gpio_is_occupied(unsigned gpio) return GPDR(gpio) & GPIO_bit(gpio); } -typedef int (*set_wake_t)(unsigned int irq, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); +#include #endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index dcc3ceaf717f..b837df440483 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -4,3 +4,4 @@ obj-y := dma.o +obj-$(CONFIG_GENERIC_GPIO) += gpio.o diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c similarity index 89% rename from arch/arm/mach-pxa/gpio.c rename to arch/arm/plat-pxa/gpio.c index 7c2267036bf1..af819bf21b63 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-pxa/gpio.c + * linux/arch/arm/plat-pxa/gpio.c * * Generic PXA GPIO handling * @@ -22,34 +22,6 @@ int pxa_last_gpio; -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - struct pxa_gpio_chip { struct gpio_chip chip; void __iomem *regbase; diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h new file mode 100644 index 000000000000..44248cb926a5 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/gpio.h @@ -0,0 +1,62 @@ +#ifndef __PLAT_GPIO_H +#define __PLAT_GPIO_H + +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ + +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) + +#define GPLR_OFFSET 0x00 +#define GPDR_OFFSET 0x0C +#define GPSR_OFFSET 0x18 +#define GPCR_OFFSET 0x24 +#define GRER_OFFSET 0x30 +#define GFER_OFFSET 0x3C +#define GEDR_OFFSET 0x48 + +static inline int gpio_get_value(unsigned gpio) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) + return GPLR(gpio) & GPIO_bit(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { + if (value) + GPSR(gpio) = GPIO_bit(gpio); + else + GPCR(gpio) = GPIO_bit(gpio); + } else + __gpio_set_value(gpio, value); +} + +#define gpio_cansleep __gpio_cansleep + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +typedef int (*set_wake_t)(unsigned int irq, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); +#endif /* __PLAT_GPIO_H */ -- 2.39.5