From 3ad48062233f32a8dd2649403f5afc076710f86b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 13 Oct 2015 17:09:14 +0300 Subject: [PATCH] spi: pxa2xx: choose closest lower speed As per discussion [1] the best choice is to set closest speed which is not going over the asked one. Do the same approach for Intel Quark boards. [1] http://www.spinics.net/lists/linux-spi/msg03389.html Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 22b473ebf607..158967a10bec 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -730,7 +730,7 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) mul = (1 << 24) >> 1; /* Calculate initial quot */ - q1 = DIV_ROUND_CLOSEST(fref1, rate); + q1 = DIV_ROUND_UP(fref1, rate); /* Scale q1 if it's too big */ if (q1 > 256) { @@ -755,7 +755,7 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) /* Case 2 */ - q2 = DIV_ROUND_CLOSEST(fref2, rate); + q2 = DIV_ROUND_UP(fref2, rate); r2 = abs(fref2 / q2 - rate); /* @@ -774,13 +774,13 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) mul = (1 << 24) * 2 / 5; } - /* Check case 3 only If the divisor is big enough */ + /* Check case 3 only if the divisor is big enough */ if (fref / rate >= 80) { u64 fssp; u32 m; /* Calculate initial quot */ - q1 = DIV_ROUND_CLOSEST(fref, rate); + q1 = DIV_ROUND_UP(fref, rate); m = (1 << 24) / q1; /* Get the remainder */ -- 2.39.2