From 3bf0a4194f1a149c17373d83a9fde94d84b4098a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 14 Jan 2016 13:52:40 +0100 Subject: [PATCH] ARM: pb1176: add ethernet to devicetree The PB1176 device tree was missing the SMSC9118 ethernet adapter, so add it. Since this peripheral is not in either development chip but on the board itself, it gets defined in the root node of the device tree. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 8a0bc4222cfc..76ecce24fb70 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -53,6 +53,14 @@ regulator-boot-on; }; + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -131,6 +139,20 @@ status = "disabled"; }; + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@3a000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x3a000000 0x10000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + usb@3b000000 { compatible = "nxp,usb-isp1761"; reg = <0x3b000000 0x20000>; -- 2.39.2