From 3cca8624b6624e7ffb87dcd8a0a05bef9b50e97b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:15 +0100 Subject: [PATCH] USB: serial: ch341: fix line settings after reset-resume A recent change added support for modifying the default line-control settings, but did not make sure that the modified settings were used as part of reconfiguration after a device has been reset during resume. This caused a port that was open before suspend to be unusable until being closed and reopened. Fixes: ba781bdf8662 ("USB: serial: ch341: add support for parity, frame length, stop bits") Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 5343d65f3b52..eabdd05a2147 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -95,6 +95,7 @@ struct ch341_private { unsigned baud_rate; /* set baud rate */ u8 line_control; /* set line control value RTS/DTR */ u8 line_status; /* active status of modem control inputs */ + u8 lcr; }; static void ch341_set_termios(struct tty_struct *tty, @@ -232,7 +233,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_init_set_baudrate(dev, priv, 0); + r = ch341_init_set_baudrate(dev, priv, priv->lcr); if (r < 0) goto out; @@ -397,6 +398,8 @@ static void ch341_set_termios(struct tty_struct *tty, if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); + } else if (r == 0) { + priv->lcr = ctrl; } } -- 2.39.5