From 4302a595cd9c6363b495460497ecbda49fa16858 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 15 Dec 2006 06:53:55 +1100 Subject: [PATCH] USB: Rework the OHCI quirk mecanism as suggested by David This patch applies David Brownell's suggestion for reworking the OHCI quirk mechanism via a table of PCI IDs. It adapts the existing quirks to use that mechanism. This also moves the quirks to reset() as suggested by the comment in there. This is necessary as we need to have the endian properly set before we try to init the controller. Signed-off-by: Benjamin Herrenschmidt Acked-by: David Brownell Acked-by: Geoff Levand Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pci.c | 173 +++++++++++++++++++++++------------- 1 file changed, 110 insertions(+), 63 deletions(-) diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 596e0b41e606..82fbec305a66 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -20,79 +20,128 @@ /*-------------------------------------------------------------------------*/ -static int -ohci_pci_reset (struct usb_hcd *hcd) +/* AMD 756, for most chips (early revs), corrupts register + * values on read ... so enable the vendor workaround. + */ +static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - ohci_hcd_init (ohci); - return ohci_init (ohci); + ohci->flags = OHCI_QUIRK_AMD756; + ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); + + /* also erratum 10 (suspend/resume issues) */ + device_init_wakeup(&hcd->self.root_hub->dev, 0); + + return 0; } -static int __devinit -ohci_pci_start (struct usb_hcd *hcd) +/* Apple's OHCI driver has a lot of bizarre workarounds + * for this chip. Evidently control and bulk lists + * can get confused. (B&W G3 models, and ...) + */ +static int __devinit ohci_quirk_opti(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - /* REVISIT this whole block should move to reset(), which handles - * all the other one-time init. + ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n"); + + return 0; +} + +/* Check for NSC87560. We have to look at the bridge (fn1) to + * identify the USB (fn2). This quirk might apply to more or + * even all NSC stuff. + */ +static int __devinit ohci_quirk_ns(struct usb_hcd *hcd) +{ + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + struct pci_dev *b; + + b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); + if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO + && b->vendor == PCI_VENDOR_ID_NS) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci->flags |= OHCI_QUIRK_SUPERIO; + ohci_dbg (ohci, "Using NSC SuperIO setup\n"); + } + pci_dev_put(b); + + return 0; +} + +/* Check for Compaq's ZFMicro chipset, which needs short + * delays before control or bulk queues get re-activated + * in finish_unlinks() + */ +static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + ohci->flags |= OHCI_QUIRK_ZFMICRO; + ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n"); + + return 0; +} + + +/* List of quirks for OHCI */ +static const struct pci_device_id ohci_pci_quirks[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c), + .driver_data = (unsigned long)ohci_quirk_amd756, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861), + .driver_data = (unsigned long)ohci_quirk_opti, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID), + .driver_data = (unsigned long)ohci_quirk_ns, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8), + .driver_data = (unsigned long)ohci_quirk_zfmicro, + }, + /* FIXME for some of the early AMD 760 southbridges, OHCI + * won't work at all. blacklist them. */ + {}, +}; + +static int ohci_pci_reset (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret = 0; + if (hcd->self.controller) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + const struct pci_device_id *quirk_id; - /* AMD 756, for most chips (early revs), corrupts register - * values on read ... so enable the vendor workaround. - */ - if (pdev->vendor == PCI_VENDOR_ID_AMD - && pdev->device == 0x740c) { - ohci->flags = OHCI_QUIRK_AMD756; - ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); - /* also erratum 10 (suspend/resume issues) */ - device_init_wakeup(&hcd->self.root_hub->dev, 0); + quirk_id = pci_match_id(ohci_pci_quirks, pdev); + if (quirk_id != NULL) { + int (*quirk)(struct usb_hcd *ohci); + quirk = (void *)quirk_id->driver_data; + ret = quirk(hcd); } + } + if (ret == 0) { + ohci_hcd_init (ohci); + return ohci_init (ohci); + } + return ret; +} - /* FIXME for some of the early AMD 760 southbridges, OHCI - * won't work at all. blacklist them. - */ - - /* Apple's OHCI driver has a lot of bizarre workarounds - * for this chip. Evidently control and bulk lists - * can get confused. (B&W G3 models, and ...) - */ - else if (pdev->vendor == PCI_VENDOR_ID_OPTI - && pdev->device == 0xc861) { - ohci_dbg (ohci, - "WARNING: OPTi workarounds unavailable\n"); - } - /* Check for NSC87560. We have to look at the bridge (fn1) to - * identify the USB (fn2). This quirk might apply to more or - * even all NSC stuff. - */ - else if (pdev->vendor == PCI_VENDOR_ID_NS) { - struct pci_dev *b; - - b = pci_get_slot (pdev->bus, - PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); - if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO - && b->vendor == PCI_VENDOR_ID_NS) { - ohci->flags |= OHCI_QUIRK_SUPERIO; - ohci_dbg (ohci, "Using NSC SuperIO setup\n"); - } - pci_dev_put(b); - } +static int __devinit ohci_pci_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; - /* Check for Compaq's ZFMicro chipset, which needs short - * delays before control or bulk queues get re-activated - * in finish_unlinks() - */ - else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ - && pdev->device == 0xa0f8) { - ohci->flags |= OHCI_QUIRK_ZFMICRO; - ohci_dbg (ohci, - "enabled Compaq ZFMicro chipset quirk\n"); - } +#ifdef CONFIG_PM /* avoid warnings about unused pdev */ + if (hcd->self.controller) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* RWC may not be set for add-in PCI cards, since boot * firmware probably ignored them. This transfers PCI @@ -101,16 +150,14 @@ ohci_pci_start (struct usb_hcd *hcd) if (device_may_wakeup(&pdev->dev)) ohci->hc_control |= OHCI_CTRL_RWC; } +#endif /* CONFIG_PM */ - /* NOTE: there may have already been a first reset, to - * keep bios/smm irqs from making trouble - */ - if ((ret = ohci_run (ohci)) < 0) { + ret = ohci_run (ohci); + if (ret < 0) { ohci_err (ohci, "can't start\n"); ohci_stop (hcd); - return ret; } - return 0; + return ret; } #ifdef CONFIG_PM -- 2.39.5