From 430be10dd356fe9f1c142222fb9cc78feb00e86f Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 8 Sep 2016 04:48:14 +0300 Subject: [PATCH] pinctrl: imx: accept gpio request/free from pinctrl While only Freescale Vybrid SoC has settings of GPIO capabilities done by iomux controller, it is only a matter of GPIO controller driver implementation for the rest of Freescale/NXP SoCs from iMX series. As a practical example on GPIO request a pad function should be switched to GPIO, but because this requires updates to all particular iMX pinctrl drivers, for simplicity at the moment add only a proper connection between shared pinctrl-imx and pinctrl/pinmux core, namely .gpio_request_enable/.gpio_disable_free/.gpio_set_direction callbacks should return success to a caller. This change allows to progress by adding request/free callbacks into gpio-mxc.c driver. Signed-off-by: Vladimir Zapolskiy Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 56fd88013850..47613201269a 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -315,7 +315,7 @@ static int imx_pmx_gpio_request_enable(struct pinctrl_dev *pctldev, /* Currently implementation only for shared mux/conf register */ if (!(info->flags & SHARE_MUX_CONF_REG)) - return -EINVAL; + return 0; pin_reg = &info->pin_regs[offset]; if (pin_reg->mux_reg == -1) @@ -380,7 +380,7 @@ static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, * They are part of the shared mux/conf register. */ if (!(info->flags & SHARE_MUX_CONF_REG)) - return -EINVAL; + return 0; pin_reg = &info->pin_regs[offset]; if (pin_reg->mux_reg == -1) -- 2.39.5