From 430ee58e03f1ed9c2a2b697e2f2e0bb870ce1a23 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 18 Dec 2012 15:25:47 +0100 Subject: [PATCH] usb/core: update power budget for SuperSpeed Sarah pointed out that the USB3.0 spec also updates the amount of power that may be consumed by the device and quoted 9.2.5.1: |"The amount of current draw for SuperSpeed devices are increased to 150 |mA for low-power devices and 900 mA for high-power" This patch tries to update all users to use the larger values for SuperSpeed devices and use the "old" ones for everything else. While here, two other changes suggested by Alan: - the comment referering to 7.2.1.1 has been updated to 7.2.1 which is the correct source of the action. - the check for hubs with zero ports has been removed. - compute bus power by full_load * num_ports on root hubs Acked-by: Alan Stern Acked-by: Sarah Sharp Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 1 - drivers/usb/core/hub.c | 57 ++++++++++++++++++++++++++++++------------ 2 files changed, 41 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 4225d5e72131..5f6da8b2d6a1 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2506,7 +2506,6 @@ int usb_add_hcd(struct usb_hcd *hcd, } /* starting here, usbcore will pay attention to this root hub */ - rhdev->bus_mA = min(500u, hcd->power_budget); if ((retval = register_root_hub(hcd)) != 0) goto err_register_root_hub; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 12913306840a..0ef512aa2898 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1351,6 +1351,8 @@ static int hub_configure(struct usb_hub *hub, unsigned int pipe; int maxp, ret, i; char *message = "out of memory"; + unsigned unit_load; + unsigned full_load; hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); if (!hub->buffer) { @@ -1397,6 +1399,13 @@ static int hub_configure(struct usb_hub *hub, } wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + if (hub_is_superspeed(hdev)) { + unit_load = 150; + full_load = 900; + } else { + unit_load = 100; + full_load = 500; + } /* FIXME for USB 3.0, skip for now */ if ((wHubCharacteristics & HUB_CHAR_COMPOUND) && @@ -1516,40 +1525,44 @@ static int hub_configure(struct usb_hub *hub, goto fail; } le16_to_cpus(&hubstatus); + hcd = bus_to_hcd(hdev->bus); if (hdev == hdev->bus->root_hub) { - if (hdev->bus_mA == 0 || hdev->bus_mA >= 500) - hub->mA_per_port = 500; + if (hcd->power_budget > 0) + hdev->bus_mA = hcd->power_budget; + else + hdev->bus_mA = full_load * hdev->maxchild; + if (hdev->bus_mA >= full_load) + hub->mA_per_port = full_load; else { hub->mA_per_port = hdev->bus_mA; hub->limited_power = 1; } } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) { + int remaining = hdev->bus_mA - + hub->descriptor->bHubContrCurrent; + dev_dbg(hub_dev, "hub controller current requirement: %dmA\n", hub->descriptor->bHubContrCurrent); hub->limited_power = 1; - if (hdev->maxchild > 0) { - int remaining = hdev->bus_mA - - hub->descriptor->bHubContrCurrent; - if (remaining < hdev->maxchild * 100) - dev_warn(hub_dev, + if (remaining < hdev->maxchild * unit_load) + dev_warn(hub_dev, "insufficient power available " "to use all downstream ports\n"); - hub->mA_per_port = 100; /* 7.2.1.1 */ - } + hub->mA_per_port = unit_load; /* 7.2.1 */ + } else { /* Self-powered external hub */ /* FIXME: What about battery-powered external hubs that * provide less current per port? */ - hub->mA_per_port = 500; + hub->mA_per_port = full_load; } - if (hub->mA_per_port < 500) + if (hub->mA_per_port < full_load) dev_dbg(hub_dev, "%umA bus power budget for each child\n", hub->mA_per_port); /* Update the HCD's internal representation of this hub before khubd * starts getting port status changes for devices under the hub. */ - hcd = bus_to_hcd(hdev->bus); if (hcd->driver->update_hub_device) { ret = hcd->driver->update_hub_device(hcd, hdev, &hub->tt, GFP_KERNEL); @@ -4204,16 +4217,23 @@ hub_power_remaining (struct usb_hub *hub) for (port1 = 1; port1 <= hdev->maxchild; ++port1) { struct usb_device *udev = hub->ports[port1 - 1]->child; int delta; + unsigned unit_load; if (!udev) continue; + if (hub_is_superspeed(udev)) + unit_load = 150; + else + unit_load = 100; - /* Unconfigured devices may not use more than 100mA, - * or 8mA for OTG ports */ + /* + * Unconfigured devices may not use more than one unit load, + * or 8mA for OTG ports + */ if (udev->actconfig) delta = usb_get_max_power(udev, udev->actconfig); else if (port1 != udev->bus->otg_port || hdev->parent) - delta = 100; + delta = unit_load; else delta = 8; if (delta > hub->mA_per_port) @@ -4248,6 +4268,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, le16_to_cpu(hub->descriptor->wHubCharacteristics); struct usb_device *udev; int status, i; + unsigned unit_load; dev_dbg (hub_dev, "port %d, status %04x, change %04x, %s\n", @@ -4337,6 +4358,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, goto done; return; } + if (hub_is_superspeed(hub->hdev)) + unit_load = 150; + else + unit_load = 100; for (i = 0; i < SET_CONFIG_TRIES; i++) { @@ -4384,7 +4409,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * on the parent. */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB - && udev->bus_mA <= 100) { + && udev->bus_mA <= unit_load) { u16 devstat; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, -- 2.39.5