From 45993653bd5935dbf975bc26a834f2ff23c9f914 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 19 Jan 2011 20:47:04 +0100 Subject: [PATCH] net/fec: reorder functions a bit allows removing forward declarations MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König --- drivers/net/fec.c | 353 +++++++++++++++++++++++----------------------- 1 file changed, 174 insertions(+), 179 deletions(-) diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 4c888f1825a3..3f5dfe2e41ac 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -205,13 +205,6 @@ struct fec_enet_private { struct completion mdio_done; }; -static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); -static void fec_enet_tx(struct net_device *ndev); -static void fec_enet_rx(struct net_device *ndev); -static int fec_enet_close(struct net_device *ndev); -static void fec_restart(struct net_device *ndev, int duplex); -static void fec_stop(struct net_device *ndev); - /* FEC MII MMFR bits definition */ #define FEC_MMFR_ST (1 << 30) #define FEC_MMFR_OP_READ (2 << 28) @@ -335,53 +328,159 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/* This function is called to start or restart the FEC during a link + * change. This only happens when switching between half and full + * duplex. + */ static void -fec_timeout(struct net_device *ndev) +fec_restart(struct net_device *ndev, int duplex) { struct fec_enet_private *fep = netdev_priv(ndev); + const struct platform_device_id *id_entry = + platform_get_device_id(fep->pdev); + int i; + u32 val, temp_mac[2]; - ndev->stats.tx_errors++; + /* Whack a reset. We should wait for this. */ + writel(1, fep->hwp + FEC_ECNTRL); + udelay(10); - fec_restart(ndev, fep->full_duplex); - netif_wake_queue(ndev); -} + /* + * enet-mac reset will reset mac address registers too, + * so need to reconfigure it. + */ + if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { + memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN); + writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW); + writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH); + } -static irqreturn_t -fec_enet_interrupt(int irq, void *dev_id) -{ - struct net_device *ndev = dev_id; - struct fec_enet_private *fep = netdev_priv(ndev); - uint int_events; - irqreturn_t ret = IRQ_NONE; + /* Clear any outstanding interrupt. */ + writel(0xffc00000, fep->hwp + FEC_IEVENT); - do { - int_events = readl(fep->hwp + FEC_IEVENT); - writel(int_events, fep->hwp + FEC_IEVENT); + /* Reset all multicast. */ + writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); + writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); +#ifndef CONFIG_M5272 + writel(0, fep->hwp + FEC_HASH_TABLE_HIGH); + writel(0, fep->hwp + FEC_HASH_TABLE_LOW); +#endif - if (int_events & FEC_ENET_RXF) { - ret = IRQ_HANDLED; - fec_enet_rx(ndev); - } + /* Set maximum receive buffer size. */ + writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); - /* Transmit OK, or non-fatal error. Update the buffer - * descriptors. FEC handles all errors, we just discover - * them as part of the transmit process. - */ - if (int_events & FEC_ENET_TXF) { - ret = IRQ_HANDLED; - fec_enet_tx(ndev); + /* Set receive and transmit descriptor base. */ + writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); + writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, + fep->hwp + FEC_X_DES_START); + + fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; + fep->cur_rx = fep->rx_bd_base; + + /* Reset SKB transmit buffers. */ + fep->skb_cur = fep->skb_dirty = 0; + for (i = 0; i <= TX_RING_MOD_MASK; i++) { + if (fep->tx_skbuff[i]) { + dev_kfree_skb_any(fep->tx_skbuff[i]); + fep->tx_skbuff[i] = NULL; } + } - if (int_events & FEC_ENET_MII) { - ret = IRQ_HANDLED; - complete(&fep->mdio_done); + /* Enable MII mode */ + if (duplex) { + /* MII enable / FD enable */ + writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL); + writel(0x04, fep->hwp + FEC_X_CNTRL); + } else { + /* MII enable / No Rcv on Xmit */ + writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL); + writel(0x0, fep->hwp + FEC_X_CNTRL); + } + fep->full_duplex = duplex; + + /* Set MII speed */ + writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); + + /* + * The phy interface and speed need to get configured + * differently on enet-mac. + */ + if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { + val = readl(fep->hwp + FEC_R_CNTRL); + + /* MII or RMII */ + if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) + val |= (1 << 8); + else + val &= ~(1 << 8); + + /* 10M or 100M */ + if (fep->phy_dev && fep->phy_dev->speed == SPEED_100) + val &= ~(1 << 9); + else + val |= (1 << 9); + + writel(val, fep->hwp + FEC_R_CNTRL); + } else { +#ifdef FEC_MIIGSK_ENR + if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { + /* disable the gasket and wait */ + writel(0, fep->hwp + FEC_MIIGSK_ENR); + while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) + udelay(1); + + /* + * configure the gasket: + * RMII, 50 MHz, no loopback, no echo + */ + writel(1, fep->hwp + FEC_MIIGSK_CFGR); + + /* re-enable the gasket */ + writel(2, fep->hwp + FEC_MIIGSK_ENR); } - } while (int_events); +#endif + } - return ret; + /* And last, enable the transmit and receive processing */ + writel(2, fep->hwp + FEC_ECNTRL); + writel(0, fep->hwp + FEC_R_DES_ACTIVE); + + /* Enable interrupts we wish to service */ + writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); +} + +static void +fec_stop(struct net_device *ndev) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + /* We cannot expect a graceful transmit stop without link !!! */ + if (fep->link) { + writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ + udelay(10); + if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) + printk("fec_stop : Graceful transmit stop did not complete !\n"); + } + + /* Whack a reset. We should wait for this. */ + writel(1, fep->hwp + FEC_ECNTRL); + udelay(10); + writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); + writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); } +static void +fec_timeout(struct net_device *ndev) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + + ndev->stats.tx_errors++; + + fec_restart(ndev, fep->full_duplex); + netif_wake_queue(ndev); +} + static void fec_enet_tx(struct net_device *ndev) { @@ -576,6 +675,43 @@ rx_processing_done: spin_unlock(&fep->hw_lock); } +static irqreturn_t +fec_enet_interrupt(int irq, void *dev_id) +{ + struct net_device *ndev = dev_id; + struct fec_enet_private *fep = netdev_priv(ndev); + uint int_events; + irqreturn_t ret = IRQ_NONE; + + do { + int_events = readl(fep->hwp + FEC_IEVENT); + writel(int_events, fep->hwp + FEC_IEVENT); + + if (int_events & FEC_ENET_RXF) { + ret = IRQ_HANDLED; + fec_enet_rx(ndev); + } + + /* Transmit OK, or non-fatal error. Update the buffer + * descriptors. FEC handles all errors, we just discover + * them as part of the transmit process. + */ + if (int_events & FEC_ENET_TXF) { + ret = IRQ_HANDLED; + fec_enet_tx(ndev); + } + + if (int_events & FEC_ENET_MII) { + ret = IRQ_HANDLED; + complete(&fep->mdio_done); + } + } while (int_events); + + return ret; +} + + + /* ------------------------------------------------------------------------- */ static void __inline__ fec_get_mac(struct net_device *ndev) { @@ -1217,147 +1353,6 @@ static int fec_enet_init(struct net_device *ndev) return 0; } -/* This function is called to start or restart the FEC during a link - * change. This only happens when switching between half and full - * duplex. - */ -static void -fec_restart(struct net_device *ndev, int duplex) -{ - struct fec_enet_private *fep = netdev_priv(ndev); - const struct platform_device_id *id_entry = - platform_get_device_id(fep->pdev); - int i; - u32 val, temp_mac[2]; - - /* Whack a reset. We should wait for this. */ - writel(1, fep->hwp + FEC_ECNTRL); - udelay(10); - - /* - * enet-mac reset will reset mac address registers too, - * so need to reconfigure it. - */ - if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { - memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN); - writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW); - writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH); - } - - /* Clear any outstanding interrupt. */ - writel(0xffc00000, fep->hwp + FEC_IEVENT); - - /* Reset all multicast. */ - writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); - writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); -#ifndef CONFIG_M5272 - writel(0, fep->hwp + FEC_HASH_TABLE_HIGH); - writel(0, fep->hwp + FEC_HASH_TABLE_LOW); -#endif - - /* Set maximum receive buffer size. */ - writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); - - /* Set receive and transmit descriptor base. */ - writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); - writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, - fep->hwp + FEC_X_DES_START); - - fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; - fep->cur_rx = fep->rx_bd_base; - - /* Reset SKB transmit buffers. */ - fep->skb_cur = fep->skb_dirty = 0; - for (i = 0; i <= TX_RING_MOD_MASK; i++) { - if (fep->tx_skbuff[i]) { - dev_kfree_skb_any(fep->tx_skbuff[i]); - fep->tx_skbuff[i] = NULL; - } - } - - /* Enable MII mode */ - if (duplex) { - /* MII enable / FD enable */ - writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL); - writel(0x04, fep->hwp + FEC_X_CNTRL); - } else { - /* MII enable / No Rcv on Xmit */ - writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL); - writel(0x0, fep->hwp + FEC_X_CNTRL); - } - fep->full_duplex = duplex; - - /* Set MII speed */ - writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); - - /* - * The phy interface and speed need to get configured - * differently on enet-mac. - */ - if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { - val = readl(fep->hwp + FEC_R_CNTRL); - - /* MII or RMII */ - if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) - val |= (1 << 8); - else - val &= ~(1 << 8); - - /* 10M or 100M */ - if (fep->phy_dev && fep->phy_dev->speed == SPEED_100) - val &= ~(1 << 9); - else - val |= (1 << 9); - - writel(val, fep->hwp + FEC_R_CNTRL); - } else { -#ifdef FEC_MIIGSK_ENR - if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { - /* disable the gasket and wait */ - writel(0, fep->hwp + FEC_MIIGSK_ENR); - while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) - udelay(1); - - /* - * configure the gasket: - * RMII, 50 MHz, no loopback, no echo - */ - writel(1, fep->hwp + FEC_MIIGSK_CFGR); - - /* re-enable the gasket */ - writel(2, fep->hwp + FEC_MIIGSK_ENR); - } -#endif - } - - /* And last, enable the transmit and receive processing */ - writel(2, fep->hwp + FEC_ECNTRL); - writel(0, fep->hwp + FEC_R_DES_ACTIVE); - - /* Enable interrupts we wish to service */ - writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); -} - -static void -fec_stop(struct net_device *ndev) -{ - struct fec_enet_private *fep = netdev_priv(ndev); - - /* We cannot expect a graceful transmit stop without link !!! */ - if (fep->link) { - writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ - udelay(10); - if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) - printk("fec_stop : Graceful transmit stop did not complete !\n"); - } - - /* Whack a reset. We should wait for this. */ - writel(1, fep->hwp + FEC_ECNTRL); - udelay(10); - writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); - writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); -} - static int __devinit fec_probe(struct platform_device *pdev) { -- 2.39.5