From 45bb7de213d86d491840e9c3ae139475ab3fa493 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 13 May 2015 15:26:48 +0300 Subject: [PATCH] usb: dwc3: setup phys earlier This allows dwc3_phy_setup() to be more useful later. There is nothing preventing the PHY configuration registers from being programmed early. They do not loose their context in soft reset. There are however other PHY related operations that should be executed before the driver request handles to the PHYs, such as registering DWC3's ULPI interface, which can now be done in dwc3_phy_setup(). Also, if there ever was need for the two 100ms delays in dwc3_phy_setup() there isn't anymore. The PHYs are now reset after the PHY interfaces are setup. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 921f181b620f..6b02e12aad73 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -436,8 +436,6 @@ static void dwc3_phy_setup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - mdelay(100); - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); /* @@ -453,8 +451,6 @@ static void dwc3_phy_setup(struct dwc3 *dwc) reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - - mdelay(100); } /** @@ -569,8 +565,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); - dwc3_phy_setup(dwc); - ret = dwc3_alloc_scratch_buffers(dwc); if (ret) goto err1; @@ -892,6 +886,8 @@ static int dwc3_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); + dwc3_phy_setup(dwc); + ret = dwc3_core_get_phy(dwc); if (ret) goto err0; -- 2.39.2