From 4b087ff8572c7e7095787ca14aa72e39c80859bd Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 3 Feb 2011 12:45:21 +0000 Subject: [PATCH] omap3sdp: Fix regulator mapping for ads7846 TS controller On the OMAP3430SDP board, the ads7846 touchscreen controller is powered by VAUX3 regulator (supplying 2.8v). Fix this mapping in the board file, and hence prevent the ads7846 driver init to fail with the below error.. ads7846 spi1.0: unable to get regulator: -19 Signed-off-by: Rajendra Nayak Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 31085883199e..7f8c7a73c535 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { .irq_line = 1, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; + /* * Apply all the fixed voltages since most versions of U-Boot * don't bother with that initialization. @@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), + .consumer_supplies = sdp3430_vaux3_supplies, }; /* VAUX4 for OMAP VDD_CSI2 (camera) */ -- 2.39.5