From 4c66c9205c0788e18eb09d482461aa2f551ee046 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 29 Aug 2011 00:05:35 -0300 Subject: [PATCH] [media] dvb-usb: add ATSC support for the Hauppauge WinTV-Aero-M Adds new driver, mxl111sf, to support the WinTV-Aero-M Signed-off-by: Michael Krufky Reviewed-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 8 + drivers/media/dvb/dvb-usb/Makefile | 4 + drivers/media/dvb/dvb-usb/mxl111sf-gpio.c | 763 ++++++++++++++++++ drivers/media/dvb/dvb-usb/mxl111sf-gpio.h | 56 ++ drivers/media/dvb/dvb-usb/mxl111sf-i2c.c | 851 ++++++++++++++++++++ drivers/media/dvb/dvb-usb/mxl111sf-i2c.h | 35 + drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 342 +++++++++ drivers/media/dvb/dvb-usb/mxl111sf-phy.h | 53 ++ drivers/media/dvb/dvb-usb/mxl111sf-reg.h | 179 +++++ drivers/media/dvb/dvb-usb/mxl111sf-tuner.c | 476 ++++++++++++ drivers/media/dvb/dvb-usb/mxl111sf-tuner.h | 89 +++ drivers/media/dvb/dvb-usb/mxl111sf.c | 854 +++++++++++++++++++++ drivers/media/dvb/dvb-usb/mxl111sf.h | 158 ++++ 13 files changed, 3868 insertions(+) create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-gpio.c create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-gpio.h create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-i2c.c create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-i2c.h create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-phy.c create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-phy.h create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-reg.h create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-tuner.c create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf-tuner.h create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf.c create mode 100644 drivers/media/dvb/dvb-usb/mxl111sf.h diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 6e97bb35ba67..2c77382775c1 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -381,3 +381,11 @@ config DVB_USB_IT913X select DVB_IT913X_FE help Say Y here to support the it913x device + +config DVB_USB_MXL111SF + tristate "MxL111SF DTV USB2.0 support" + depends on DVB_USB + select DVB_LGDT3305 if !DVB_FE_CUSTOMISE + select VIDEO_TVEEPROM + help + Say Y here to support the MxL111SF USB2.0 DTV receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 03ae657dedd6..06f75f645963 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -97,6 +97,10 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o dvb-usb-it913x-objs := it913x.o obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o +dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o +obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o +obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o + ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 ccflags-y += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c new file mode 100644 index 000000000000..e4121cb8f5ef --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c @@ -0,0 +1,763 @@ +/* + * mxl111sf-gpio.c - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "mxl111sf-gpio.h" +#include "mxl111sf-i2c.h" +#include "mxl111sf.h" + +/* ------------------------------------------------------------------------- */ + +#define MXL_GPIO_MUX_REG_0 0x84 +#define MXL_GPIO_MUX_REG_1 0x89 +#define MXL_GPIO_MUX_REG_2 0x82 + +#define MXL_GPIO_DIR_INPUT 0 +#define MXL_GPIO_DIR_OUTPUT 1 + + +static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val) +{ + int ret; + u8 tmp; + + mxl_debug_adv("(%d, %d)", pin, val); + + if ((pin > 0) && (pin < 8)) { + ret = mxl111sf_read_reg(state, 0x19, &tmp); + if (mxl_fail(ret)) + goto fail; + tmp &= ~(1 << (pin - 1)); + tmp |= (val << (pin - 1)); + ret = mxl111sf_write_reg(state, 0x19, tmp); + if (mxl_fail(ret)) + goto fail; + } else if (pin <= 10) { + if (pin == 0) + pin += 7; + ret = mxl111sf_read_reg(state, 0x30, &tmp); + if (mxl_fail(ret)) + goto fail; + tmp &= ~(1 << (pin - 3)); + tmp |= (val << (pin - 3)); + ret = mxl111sf_write_reg(state, 0x30, tmp); + if (mxl_fail(ret)) + goto fail; + } else + ret = -EINVAL; +fail: + return ret; +} + +static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val) +{ + int ret; + u8 tmp; + + mxl_debug("(0x%02x)", pin); + + *val = 0; + + switch (pin) { + case 0: + case 1: + case 2: + case 3: + ret = mxl111sf_read_reg(state, 0x23, &tmp); + if (mxl_fail(ret)) + goto fail; + *val = (tmp >> (pin + 4)) & 0x01; + break; + case 4: + case 5: + case 6: + case 7: + ret = mxl111sf_read_reg(state, 0x2f, &tmp); + if (mxl_fail(ret)) + goto fail; + *val = (tmp >> pin) & 0x01; + break; + case 8: + case 9: + case 10: + ret = mxl111sf_read_reg(state, 0x22, &tmp); + if (mxl_fail(ret)) + goto fail; + *val = (tmp >> (pin - 3)) & 0x01; + break; + default: + return -EINVAL; /* invalid pin */ + } +fail: + return ret; +} + +struct mxl_gpio_cfg { + u8 pin; + u8 dir; + u8 val; +}; + +static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state, + struct mxl_gpio_cfg *gpio_cfg) +{ + int ret; + u8 tmp; + + mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir); + + switch (gpio_cfg->pin) { + case 0: + case 1: + case 2: + case 3: + ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp); + if (mxl_fail(ret)) + goto fail; + tmp &= ~(1 << (gpio_cfg->pin + 4)); + tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4)); + ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp); + if (mxl_fail(ret)) + goto fail; + break; + case 4: + case 5: + case 6: + case 7: + ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp); + if (mxl_fail(ret)) + goto fail; + tmp &= ~(1 << gpio_cfg->pin); + tmp |= (gpio_cfg->dir << gpio_cfg->pin); + ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp); + if (mxl_fail(ret)) + goto fail; + break; + case 8: + case 9: + case 10: + ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp); + if (mxl_fail(ret)) + goto fail; + tmp &= ~(1 << (gpio_cfg->pin - 3)); + tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3)); + ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp); + if (mxl_fail(ret)) + goto fail; + break; + default: + return -EINVAL; /* invalid pin */ + } + + ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ? + mxl111sf_set_gpo_state(state, + gpio_cfg->pin, gpio_cfg->val) : + mxl111sf_get_gpi_state(state, + gpio_cfg->pin, &gpio_cfg->val); + mxl_fail(ret); +fail: + return ret; +} + +static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state, + int gpio, int direction, int val) +{ + struct mxl_gpio_cfg gpio_config = { + .pin = gpio, + .dir = direction, + .val = val, + }; + + mxl_debug("(%d, %d, %d)", gpio, direction, val); + + return mxl111sf_config_gpio_pins(state, &gpio_config); +} + +/* ------------------------------------------------------------------------- */ + +#define PIN_MUX_MPEG_MODE_MASK 0x40 /* 0x17 <6> */ +#define PIN_MUX_MPEG_PAR_EN_MASK 0x01 /* 0x18 <0> */ +#define PIN_MUX_MPEG_SER_EN_MASK 0x02 /* 0x18 <1> */ +#define PIN_MUX_MPG_IN_MUX_MASK 0x80 /* 0x3D <7> */ +#define PIN_MUX_BT656_ENABLE_MASK 0x04 /* 0x12 <2> */ +#define PIN_MUX_I2S_ENABLE_MASK 0x40 /* 0x15 <6> */ +#define PIN_MUX_SPI_MODE_MASK 0x10 /* 0x3D <4> */ +#define PIN_MUX_MCLK_EN_CTRL_MASK 0x10 /* 0x82 <4> */ +#define PIN_MUX_MPSYN_EN_CTRL_MASK 0x20 /* 0x82 <5> */ +#define PIN_MUX_MDVAL_EN_CTRL_MASK 0x40 /* 0x82 <6> */ +#define PIN_MUX_MPERR_EN_CTRL_MASK 0x80 /* 0x82 <7> */ +#define PIN_MUX_MDAT_EN_0_MASK 0x10 /* 0x84 <4> */ +#define PIN_MUX_MDAT_EN_1_MASK 0x20 /* 0x84 <5> */ +#define PIN_MUX_MDAT_EN_2_MASK 0x40 /* 0x84 <6> */ +#define PIN_MUX_MDAT_EN_3_MASK 0x80 /* 0x84 <7> */ +#define PIN_MUX_MDAT_EN_4_MASK 0x10 /* 0x89 <4> */ +#define PIN_MUX_MDAT_EN_5_MASK 0x20 /* 0x89 <5> */ +#define PIN_MUX_MDAT_EN_6_MASK 0x40 /* 0x89 <6> */ +#define PIN_MUX_MDAT_EN_7_MASK 0x80 /* 0x89 <7> */ + +int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state, + enum mxl111sf_mux_config pin_mux_config) +{ + u8 r12, r15, r17, r18, r3D, r82, r84, r89; + int ret; + + mxl_debug("(%d)", pin_mux_config); + + ret = mxl111sf_read_reg(state, 0x17, &r17); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x18, &r18); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x12, &r12); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x15, &r15); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x82, &r82); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x84, &r84); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x89, &r89); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_read_reg(state, 0x3D, &r3D); + if (mxl_fail(ret)) + goto fail; + + switch (pin_mux_config) { + case PIN_MUX_TS_OUT_PARALLEL: + /* mpeg_mode = 1 */ + r17 |= PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 1 */ + r18 |= PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 0 */ + r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 1 */ + r82 |= PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 1 */ + r82 |= PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 1 */ + r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 1 */ + r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0xF */ + r84 |= 0xF0; + /* mdat_en_ctrl[7:4] = 0xF */ + r89 |= 0xF0; + break; + case PIN_MUX_TS_OUT_SERIAL: + /* mpeg_mode = 1 */ + r17 |= PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 1 */ + r18 |= PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 1 */ + r82 |= PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 1 */ + r82 |= PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 1 */ + r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 1 */ + r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0xF */ + r84 |= 0xF0; + /* mdat_en_ctrl[7:4] = 0xF */ + r89 |= 0xF0; + break; + case PIN_MUX_GPIO_MODE: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 0 */ + r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_TS_SERIAL_IN_MODE_0: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 1 */ + r18 |= PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_TS_SERIAL_IN_MODE_1: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 1 */ + r18 |= PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 1 */ + r3D |= PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_TS_SPI_IN_MODE_1: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 1 */ + r18 |= PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 1 */ + r3D |= PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 1 */ + r15 |= PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 1 */ + r3D |= PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_TS_SPI_IN_MODE_0: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 1 */ + r18 |= PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 1 */ + r15 |= PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 1 */ + r3D |= PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_TS_PARALLEL_IN: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 1 */ + r18 |= PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 0 */ + r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_BT656_I2S_MODE: + /* mpeg_mode = 0 */ + r17 &= ~PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 0 */ + r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 1 */ + r12 |= PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 1 */ + r15 |= PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + case PIN_MUX_DEFAULT: + default: + /* mpeg_mode = 1 */ + r17 |= PIN_MUX_MPEG_MODE_MASK; + /* mpeg_par_en = 0 */ + r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; + /* mpeg_ser_en = 0 */ + r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; + /* mpg_in_mux = 0 */ + r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; + /* bt656_enable = 0 */ + r12 &= ~PIN_MUX_BT656_ENABLE_MASK; + /* i2s_enable = 0 */ + r15 &= ~PIN_MUX_I2S_ENABLE_MASK; + /* spi_mode = 0 */ + r3D &= ~PIN_MUX_SPI_MODE_MASK; + /* mclk_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; + /* mperr_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; + /* mdval_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; + /* mpsyn_en_ctrl = 0 */ + r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; + /* mdat_en_ctrl[3:0] = 0x0 */ + r84 &= 0x0F; + /* mdat_en_ctrl[7:4] = 0x0 */ + r89 &= 0x0F; + break; + } + + ret = mxl111sf_write_reg(state, 0x17, r17); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x18, r18); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x12, r12); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x15, r15); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x82, r82); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x84, r84); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x89, r89); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x3D, r3D); + if (mxl_fail(ret)) + goto fail; +fail: + return ret; +} + +/* ------------------------------------------------------------------------- */ + +static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val) +{ + return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val); +} + +static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state) +{ + u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */ + int i, ret; + + mxl_debug("()"); + + for (i = 3; i < 8; i++) { + ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01); + if (mxl_fail(ret)) + break; + } + + return ret; +} + +#define PCA9534_I2C_ADDR (0x40 >> 1) +static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val) +{ + u8 w[2] = { 1, 0 }; + u8 r = 0; + struct i2c_msg msg[] = { + { .addr = PCA9534_I2C_ADDR, + .flags = 0, .buf = w, .len = 1 }, + { .addr = PCA9534_I2C_ADDR, + .flags = I2C_M_RD, .buf = &r, .len = 1 }, + }; + + mxl_debug("(%d, %d)", gpio, val); + + /* read current GPIO levels from flip-flop */ + i2c_transfer(&state->d->i2c_adap, msg, 2); + + /* prepare write buffer with current GPIO levels */ + msg[0].len = 2; +#if 0 + w[0] = 1; +#endif + w[1] = r; + + /* clear the desired GPIO */ + w[1] &= ~(1 << gpio); + + /* set the desired GPIO value */ + w[1] |= ((val ? 1 : 0) << gpio); + + /* write new GPIO levels to flip-flop */ + i2c_transfer(&state->d->i2c_adap, &msg[0], 1); + + return 0; +} + +static int pca9534_init_port_expander(struct mxl111sf_state *state) +{ + u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */ + + struct i2c_msg msg = { + .addr = PCA9534_I2C_ADDR, + .flags = 0, .buf = w, .len = 2 + }; + + mxl_debug("()"); + + i2c_transfer(&state->d->i2c_adap, &msg, 1); + + /* configure all pins as outputs */ + w[0] = 3; + w[1] = 0; + + i2c_transfer(&state->d->i2c_adap, &msg, 1); + + return 0; +} + +int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val) +{ + mxl_debug("(%d, %d)", gpio, val); + + switch (state->gpio_port_expander) { + default: + mxl_printk(KERN_ERR, + "gpio_port_expander undefined, assuming PCA9534"); + /* fall-thru */ + case mxl111sf_PCA9534: + return pca9534_set_gpio(state, gpio, val); + case mxl111sf_gpio_hw: + return mxl111sf_hw_set_gpio(state, gpio, val); + } +} + +static int mxl111sf_probe_port_expander(struct mxl111sf_state *state) +{ + int ret; + u8 w = 1; + u8 r = 0; + struct i2c_msg msg[] = { + { .flags = 0, .buf = &w, .len = 1 }, + { .flags = I2C_M_RD, .buf = &r, .len = 1 }, + }; + + mxl_debug("()"); + + msg[0].addr = 0x70 >> 1; + msg[1].addr = 0x70 >> 1; + + /* read current GPIO levels from flip-flop */ + ret = i2c_transfer(&state->d->i2c_adap, msg, 2); + if (ret == 2) { + state->port_expander_addr = msg[0].addr; + state->gpio_port_expander = mxl111sf_PCA9534; + mxl_debug("found port expander at 0x%02x", + state->port_expander_addr); + return 0; + } + + msg[0].addr = 0x40 >> 1; + msg[1].addr = 0x40 >> 1; + + ret = i2c_transfer(&state->d->i2c_adap, msg, 2); + if (ret == 2) { + state->port_expander_addr = msg[0].addr; + state->gpio_port_expander = mxl111sf_PCA9534; + mxl_debug("found port expander at 0x%02x", + state->port_expander_addr); + return 0; + } + state->port_expander_addr = 0xff; + state->gpio_port_expander = mxl111sf_gpio_hw; + mxl_debug("using hardware gpio"); + return 0; +} + +int mxl111sf_init_port_expander(struct mxl111sf_state *state) +{ + mxl_debug("()"); + + if (0x00 == state->port_expander_addr) + mxl111sf_probe_port_expander(state); + + switch (state->gpio_port_expander) { + default: + mxl_printk(KERN_ERR, + "gpio_port_expander undefined, assuming PCA9534"); + /* fall-thru */ + case mxl111sf_PCA9534: + return pca9534_init_port_expander(state); + case mxl111sf_gpio_hw: + return mxl111sf_hw_gpio_initialize(state); + } +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode) +{ +/* GPO: + * 3 - ATSC/MH# | 1 = ATSC transport, 0 = MH transport | default 0 + * 4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset | default 0 + * 5 - ATSC_EN | 1 = ATSC power enable, 0 = ATSC power off | default 0 + * 6 - MH_RESET# | 1 = MH enable, 0 = MH Reset | default 0 + * 7 - MH_EN | 1 = MH power enable, 0 = MH power off | default 0 + */ + mxl_debug("(%d)", mode); + + switch (mode) { + case MXL111SF_GPIO_MOD_MH: + mxl111sf_set_gpio(state, 4, 0); + mxl111sf_set_gpio(state, 5, 0); + msleep(50); + mxl111sf_set_gpio(state, 7, 1); + msleep(50); + mxl111sf_set_gpio(state, 6, 1); + msleep(50); + + mxl111sf_set_gpio(state, 3, 0); + break; + case MXL111SF_GPIO_MOD_ATSC: + mxl111sf_set_gpio(state, 6, 0); + mxl111sf_set_gpio(state, 7, 0); + msleep(50); + mxl111sf_set_gpio(state, 5, 1); + msleep(50); + mxl111sf_set_gpio(state, 4, 1); + msleep(50); + mxl111sf_set_gpio(state, 3, 1); + break; + default: /* DVBT / STANDBY */ + mxl111sf_init_port_expander(state); + break; + } + return 0; +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h new file mode 100644 index 000000000000..0220f54299a5 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h @@ -0,0 +1,56 @@ +/* + * mxl111sf-gpio.h - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DVB_USB_MXL111SF_GPIO_H_ +#define _DVB_USB_MXL111SF_GPIO_H_ + +#include "mxl111sf.h" + +int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val); +int mxl111sf_init_port_expander(struct mxl111sf_state *state); + +#define MXL111SF_GPIO_MOD_DVBT 0 +#define MXL111SF_GPIO_MOD_MH 1 +#define MXL111SF_GPIO_MOD_ATSC 2 +int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode); + +enum mxl111sf_mux_config { + PIN_MUX_DEFAULT = 0, + PIN_MUX_TS_OUT_PARALLEL, + PIN_MUX_TS_OUT_SERIAL, + PIN_MUX_GPIO_MODE, + PIN_MUX_TS_SERIAL_IN_MODE_0, + PIN_MUX_TS_SERIAL_IN_MODE_1, + PIN_MUX_TS_SPI_IN_MODE_0, + PIN_MUX_TS_SPI_IN_MODE_1, + PIN_MUX_TS_PARALLEL_IN, + PIN_MUX_BT656_I2S_MODE, +}; + +int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state, + enum mxl111sf_mux_config pin_mux_config); + +#endif /* _DVB_USB_MXL111SF_GPIO_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c new file mode 100644 index 000000000000..a330987f7e11 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c @@ -0,0 +1,851 @@ +/* + * mxl111sf-i2c.c - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "mxl111sf-i2c.h" +#include "mxl111sf.h" + +/* SW-I2C ----------------------------------------------------------------- */ + +#define SW_I2C_ADDR 0x1a +#define SW_I2C_EN 0x02 +#define SW_SCL_OUT 0x04 +#define SW_SDA_OUT 0x08 +#define SW_SDA_IN 0x04 + +#define SW_I2C_BUSY_ADDR 0x2f +#define SW_I2C_BUSY 0x02 + +static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state, + u8 byte) +{ + int i, ret; + u8 data = 0; + + mxl_i2c("(0x%02x)", byte); + + ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); + if (mxl_fail(ret)) + goto fail; + + for (i = 0; i < 8; i++) { + + data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | data); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | data | SW_SCL_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | data); + if (mxl_fail(ret)) + goto fail; + } + + /* last bit was 0 so we need to release SDA */ + if (!(byte & 1)) { + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + } + + /* CLK high for ACK readback */ + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); + if (mxl_fail(ret)) + goto fail; + + /* drop the CLK after getting ACK, SDA will go high right away */ + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + if (data & SW_SDA_IN) + ret = -EIO; +fail: + return ret; +} + +static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state, + u8 *pbyte) +{ + int i, ret; + u8 byte = 0; + u8 data = 0; + + mxl_i2c("()"); + + *pbyte = 0; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + for (i = 0; i < 8; i++) { + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | + SW_SCL_OUT | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); + if (mxl_fail(ret)) + goto fail; + + if (data & SW_SDA_IN) + byte |= (0x80 >> i); + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + } + *pbyte = byte; +fail: + return ret; +} + +static int mxl111sf_i2c_start(struct mxl111sf_state *state) +{ + int ret; + + mxl_i2c("()"); + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN); /* start */ + mxl_fail(ret); +fail: + return ret; +} + +static int mxl111sf_i2c_stop(struct mxl111sf_state *state) +{ + int ret; + + mxl_i2c("()"); + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN); /* stop */ + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_SCL_OUT | SW_SDA_OUT); + mxl_fail(ret); +fail: + return ret; +} + +static int mxl111sf_i2c_ack(struct mxl111sf_state *state) +{ + int ret; + u8 b = 0; + + mxl_i2c("()"); + + ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN); + if (mxl_fail(ret)) + goto fail; + + /* pull SDA low */ + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + mxl_fail(ret); +fail: + return ret; +} + +static int mxl111sf_i2c_nack(struct mxl111sf_state *state) +{ + int ret; + + mxl_i2c("()"); + + /* SDA high to signal last byte read from slave */ + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, SW_I2C_ADDR, + 0x10 | SW_I2C_EN | SW_SDA_OUT); + mxl_fail(ret); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state, + struct i2c_msg *msg) +{ + int i, ret; + + mxl_i2c("()"); + + if (msg->flags & I2C_M_RD) { + + ret = mxl111sf_i2c_start(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_i2c_bitbang_sendbyte(state, + (msg->addr << 1) | 0x01); + if (mxl_fail(ret)) { + mxl111sf_i2c_stop(state); + goto fail; + } + + for (i = 0; i < msg->len; i++) { + ret = mxl111sf_i2c_bitbang_recvbyte(state, + &msg->buf[i]); + if (mxl_fail(ret)) { + mxl111sf_i2c_stop(state); + goto fail; + } + + if (i < msg->len - 1) + mxl111sf_i2c_ack(state); + } + + mxl111sf_i2c_nack(state); + + ret = mxl111sf_i2c_stop(state); + if (mxl_fail(ret)) + goto fail; + + } else { + + ret = mxl111sf_i2c_start(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_i2c_bitbang_sendbyte(state, + (msg->addr << 1) & 0xfe); + if (mxl_fail(ret)) { + mxl111sf_i2c_stop(state); + goto fail; + } + + for (i = 0; i < msg->len; i++) { + ret = mxl111sf_i2c_bitbang_sendbyte(state, + msg->buf[i]); + if (mxl_fail(ret)) { + mxl111sf_i2c_stop(state); + goto fail; + } + } + + /* FIXME: we only want to do this on the last transaction */ + mxl111sf_i2c_stop(state); + } +fail: + return ret; +} + +/* HW-I2C ----------------------------------------------------------------- */ + +#define USB_WRITE_I2C_CMD 0x99 +#define USB_READ_I2C_CMD 0xdd +#define USB_END_I2C_CMD 0xfe + +#define USB_WRITE_I2C_CMD_LEN 26 +#define USB_READ_I2C_CMD_LEN 24 + +#define I2C_MUX_REG 0x30 +#define I2C_CONTROL_REG 0x00 +#define I2C_SLAVE_ADDR_REG 0x08 +#define I2C_DATA_REG 0x0c +#define I2C_INT_STATUS_REG 0x10 + +static int mxl111sf_i2c_send_data(struct mxl111sf_state *state, + u8 index, u8 *wdata) +{ + int ret = mxl111sf_ctrl_msg(state->d, wdata[0], + &wdata[1], 25, NULL, 0); + mxl_fail(ret); + + return ret; +} + +static int mxl111sf_i2c_get_data(struct mxl111sf_state *state, + u8 index, u8 *wdata, u8 *rdata) +{ + int ret = mxl111sf_ctrl_msg(state->d, wdata[0], + &wdata[1], 25, rdata, 24); + mxl_fail(ret); + + return ret; +} + +static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state) +{ + u8 status = 0; + u8 buf[26]; + + mxl_i2c_adv("()"); + + buf[0] = USB_READ_I2C_CMD; + buf[1] = 0x00; + + buf[2] = I2C_INT_STATUS_REG; + buf[3] = 0x00; + buf[4] = 0x00; + + buf[5] = USB_END_I2C_CMD; + + mxl111sf_i2c_get_data(state, 0, buf, buf); + + if (buf[1] & 0x04) + status = 1; + + return status; +} + +static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state) +{ + u8 status = 0; + u8 buf[26]; + + mxl_i2c("()"); + + buf[0] = USB_READ_I2C_CMD; + buf[1] = 0x00; + + buf[2] = I2C_MUX_REG; + buf[3] = 0x00; + buf[4] = 0x00; + + buf[5] = I2C_INT_STATUS_REG; + buf[6] = 0x00; + buf[7] = 0x00; + buf[8] = USB_END_I2C_CMD; + + mxl111sf_i2c_get_data(state, 0, buf, buf); + + if (0x08 == (buf[1] & 0x08)) + status = 1; + + if ((buf[5] & 0x02) == 0x02) + mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */ + + return status; +} + +static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, + u8 count, u8 *rbuf) +{ + u8 i2c_w_data[26]; + u8 i2c_r_data[24]; + u8 i = 0; + u8 fifo_status = 0; + int ret; + int status = 0; + + mxl_i2c("read %d bytes", count); + + while ((fifo_status == 0) && (i++ < 5)) + fifo_status = mxl111sf_i2c_check_fifo(state); + + i2c_w_data[0] = 0xDD; + i2c_w_data[1] = 0x00; + + for (i = 2; i < 26; i++) + i2c_w_data[i] = 0xFE; + + for (i = 0; i < count; i++) { + i2c_w_data[2+(i*3)] = 0x0C; + i2c_w_data[3+(i*3)] = 0x00; + i2c_w_data[4+(i*3)] = 0x00; + } + + ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); + + /* Check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("error!"); + } else { + for (i = 0; i < count; i++) { + rbuf[i] = i2c_r_data[(i*3)+1]; + mxl_i2c("%02x\t %02x", + i2c_r_data[(i*3)+1], + i2c_r_data[(i*3)+2]); + } + + status = 1; + } + + return status; +} + +#define HWI2C400 1 +static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state, + struct i2c_msg *msg) +{ + int i, k, ret = 0; + u16 index = 0; + u8 buf[26]; + u8 i2c_r_data[24]; + u16 block_len; + u16 left_over_len; + u8 rd_status[8]; + u8 ret_status; + u8 readbuff[26]; + + mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d", + msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0, + (!msg->flags & I2C_M_RD) ? msg->len : 0); + + for (index = 0; index < 26; index++) + buf[index] = USB_END_I2C_CMD; + + /* command to indicate data payload is destined for I2C interface */ + buf[0] = USB_WRITE_I2C_CMD; + buf[1] = 0x00; + + /* enable I2C interface */ + buf[2] = I2C_MUX_REG; + buf[3] = 0x80; + buf[4] = 0x00; + + /* enable I2C interface */ + buf[5] = I2C_MUX_REG; + buf[6] = 0x81; + buf[7] = 0x00; + + /* set Timeout register on I2C interface */ + buf[8] = 0x14; + buf[9] = 0xff; + buf[10] = 0x00; +#if 0 + /* enable Interrupts on I2C interface */ + buf[8] = 0x24; + buf[9] = 0xF7; + buf[10] = 0x00; +#endif + buf[11] = 0x24; + buf[12] = 0xF7; + buf[13] = 0x00; + + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* write data on I2C bus */ + if ((!msg->flags & I2C_M_RD) && (msg->len > 0)) { + mxl_i2c("%d\t%02x", msg->len, msg->buf[0]); + + /* control register on I2C interface to initialize I2C bus */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x5E; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + + /* I2C Slave device Address */ + buf[5] = I2C_SLAVE_ADDR_REG; + buf[6] = (msg->addr); + buf[7] = 0x00; + buf[8] = USB_END_I2C_CMD; + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* check for slave device status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK writing slave address %02x", + msg->addr); + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x4E; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + /* I2C interface can do I2C operations in block of 8 bytes of + I2C data. calculation to figure out number of blocks of i2c + data required to program */ + block_len = (msg->len / 8); + left_over_len = (msg->len % 8); + index = 0; + + mxl_i2c("block_len %d, left_over_len %d", + block_len, left_over_len); + + for (index = 0; index < block_len; index++) { + for (i = 0; i < 8; i++) { + /* write data on I2C interface */ + buf[2+(i*3)] = I2C_DATA_REG; + buf[3+(i*3)] = msg->buf[(index*8)+i]; + buf[4+(i*3)] = 0x00; + } + + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK writing slave address %02x", + msg->addr); + + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x4E; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + } + + if (left_over_len) { + for (k = 0; k < 26; k++) + buf[k] = USB_END_I2C_CMD; + + buf[0] = 0x99; + buf[1] = 0x00; + + for (i = 0; i < left_over_len; i++) { + buf[2+(i*3)] = I2C_DATA_REG; + buf[3+(i*3)] = msg->buf[(index*8)+i]; + mxl_i2c("index = %d %d data %d", + index, i, msg->buf[(index*8)+i]); + buf[4+(i*3)] = 0x00; + } + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK writing slave address %02x", + msg->addr); + + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x4E; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + } + + /* issue I2C STOP after write */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x4E; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + + } + + /* read data from I2C bus */ + if ((msg->flags & I2C_M_RD) && (msg->len > 0)) { + mxl_i2c("read buf len %d", msg->len); + + /* command to indicate data payload is + destined for I2C interface */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xDF; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + + /* I2C xfer length */ + buf[5] = 0x14; + buf[6] = (msg->len & 0xFF); + buf[7] = 0; + + /* I2C slave device Address */ + buf[8] = I2C_SLAVE_ADDR_REG; + buf[9] = msg->addr; + buf[10] = 0x00; + buf[11] = USB_END_I2C_CMD; + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK reading slave address %02x", + msg->addr); + + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xC7; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + /* I2C interface can do I2C operations in block of 8 bytes of + I2C data. calculation to figure out number of blocks of + i2c data required to program */ + block_len = ((msg->len) / 8); + left_over_len = ((msg->len) % 8); + index = 0; + + mxl_i2c("block_len %d, left_over_len %d", + block_len, left_over_len); + + /* command to read data from I2C interface */ + buf[0] = USB_READ_I2C_CMD; + buf[1] = 0x00; + + for (index = 0; index < block_len; index++) { + /* setup I2C read request packet on I2C interface */ + for (i = 0; i < 8; i++) { + buf[2+(i*3)] = I2C_DATA_REG; + buf[3+(i*3)] = 0x00; + buf[4+(i*3)] = 0x00; + } + + ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data); + + /* check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK reading slave address %02x", + msg->addr); + + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xC7; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + /* copy data from i2c data payload to read buffer */ + for (i = 0; i < 8; i++) { + rd_status[i] = i2c_r_data[(i*3)+2]; + + if (rd_status[i] == 0x04) { + if (i < 7) { + mxl_i2c("i2c fifo empty!" + " @ %d", i); + msg->buf[(index*8)+i] = + i2c_r_data[(i*3)+1]; + /* read again */ + ret_status = + mxl111sf_i2c_readagain( + state, 8-(i+1), + readbuff); + if (ret_status == 1) { + for (k = 0; + k < 8-(i+1); + k++) { + + msg->buf[(index*8)+(k+i+1)] = + readbuff[k]; + mxl_i2c("read data: %02x\t %02x", + msg->buf[(index*8)+(k+i)], + (index*8)+(k+i)); + mxl_i2c("read data: %02x\t %02x", + msg->buf[(index*8)+(k+i+1)], + readbuff[k]); + + } + goto stop_copy; + } else { + mxl_i2c("readagain " + "ERROR!"); + } + } else { + msg->buf[(index*8)+i] = + i2c_r_data[(i*3)+1]; + } + } else { + msg->buf[(index*8)+i] = + i2c_r_data[(i*3)+1]; + } + } +stop_copy: + ; + + } + + if (left_over_len) { + for (k = 0; k < 26; k++) + buf[k] = USB_END_I2C_CMD; + + buf[0] = 0xDD; + buf[1] = 0x00; + + for (i = 0; i < left_over_len; i++) { + buf[2+(i*3)] = I2C_DATA_REG; + buf[3+(i*3)] = 0x00; + buf[4+(i*3)] = 0x00; + } + ret = mxl111sf_i2c_get_data(state, 0, buf, + i2c_r_data); + + /* check for I2C NACK status */ + if (mxl111sf_i2c_check_status(state) == 1) { + mxl_i2c("NACK reading slave address %02x", + msg->addr); + + /* if NACK, stop I2C bus and exit */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xC7; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + ret = -EIO; + goto exit; + } + + for (i = 0; i < left_over_len; i++) { + msg->buf[(block_len*8)+i] = + i2c_r_data[(i*3)+1]; + mxl_i2c("read data: %02x\t %02x", + i2c_r_data[(i*3)+1], + i2c_r_data[(i*3)+2]); + } + } + + /* indicate I2C interface to issue NACK + after next I2C read op */ + buf[0] = USB_WRITE_I2C_CMD; + buf[1] = 0x00; + + /* control register */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0x17; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + + buf[5] = USB_END_I2C_CMD; + ret = mxl111sf_i2c_send_data(state, 0, buf); + + /* control register */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xC7; + buf[4] = (HWI2C400) ? 0x03 : 0x0D; + + } +exit: + /* STOP and disable I2C MUX */ + buf[0] = USB_WRITE_I2C_CMD; + buf[1] = 0x00; + + /* de-initilize I2C BUS */ + buf[5] = USB_END_I2C_CMD; + mxl111sf_i2c_send_data(state, 0, buf); + + /* Control Register */ + buf[2] = I2C_CONTROL_REG; + buf[3] = 0xDF; + buf[4] = 0x03; + + /* disable I2C interface */ + buf[5] = I2C_MUX_REG; + buf[6] = 0x00; + buf[7] = 0x00; + + /* de-initilize I2C BUS */ + buf[8] = USB_END_I2C_CMD; + mxl111sf_i2c_send_data(state, 0, buf); + + /* disable I2C interface */ + buf[2] = I2C_MUX_REG; + buf[3] = 0x81; + buf[4] = 0x00; + + /* disable I2C interface */ + buf[5] = I2C_MUX_REG; + buf[6] = 0x00; + buf[7] = 0x00; + + /* disable I2C interface */ + buf[8] = I2C_MUX_REG; + buf[9] = 0x00; + buf[10] = 0x00; + + buf[11] = USB_END_I2C_CMD; + mxl111sf_i2c_send_data(state, 0, buf); + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct mxl111sf_state *state = d->priv; + int hwi2c = (state->chip_rev > MXL111SF_V6); + int i, ret; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + ret = (hwi2c) ? + mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) : + mxl111sf_i2c_sw_xfer_msg(state, &msg[i]); + if (mxl_fail(ret)) { + mxl_debug_adv("failed with error %d on i2c " + "transaction %d of %d, %sing %d bytes " + "to/from 0x%02x", ret, i+1, num, + (msg[i].flags & I2C_M_RD) ? + "read" : "writ", + msg[i].len, msg[i].addr); + + break; + } + } + + mutex_unlock(&d->i2c_mutex); + + return i == num ? num : -EREMOTEIO; +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h new file mode 100644 index 000000000000..a57a45ffb9e4 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h @@ -0,0 +1,35 @@ +/* + * mxl111sf-i2c.h - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DVB_USB_MXL111SF_I2C_H_ +#define _DVB_USB_MXL111SF_I2C_H_ + +#include + +int mxl111sf_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num); + +#endif /* _DVB_USB_MXL111SF_I2C_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c new file mode 100644 index 000000000000..91dc1fc2825b --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -0,0 +1,342 @@ +/* + * mxl111sf-phy.c - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "mxl111sf-phy.h" +#include "mxl111sf-reg.h" + +int mxl111sf_init_tuner_demod(struct mxl111sf_state *state) +{ + struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = { + {0x07, 0xff, 0x0c}, + {0x58, 0xff, 0x9d}, + {0x09, 0xff, 0x00}, + {0x06, 0xff, 0x06}, + {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */ + {0x8d, 0x01, 0x01}, /* NEGATE_Q */ + {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */ + {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */ + {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */ + {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */ + {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */ + {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */ + {0x88, 0xff, 0xf0}, /* INF_THD = 240 */ + {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */ + {0x00, 0xff, 0x01}, /* Change to page 1 */ + {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */ + {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */ + {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */ + {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */ + {0x00, 0xff, 0x00}, /* Change to page 0 */ + {0, 0, 0} + }; + + mxl_debug("()"); + + return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default); +} + +int mxl1x1sf_soft_reset(struct mxl111sf_state *state) +{ + int ret; + mxl_debug("()"); + + ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */ + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */ + mxl_fail(ret); +fail: + return ret; +} + +int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode) +{ + int ret; + + mxl_debug("(%s)", MXL_SOC_MODE == mode ? + "MXL_SOC_MODE" : "MXL_TUNER_MODE"); + + /* set device mode */ + ret = mxl111sf_write_reg(state, 0x03, + MXL_SOC_MODE == mode ? 0x01 : 0x00); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg_mask(state, + 0x7d, 0x40, MXL_SOC_MODE == mode ? + 0x00 : /* enable impulse noise filter, + INF_BYP = 0 */ + 0x40); /* disable impulse noise filter, + INF_BYP = 1 */ + if (mxl_fail(ret)) + goto fail; + + state->device_mode = mode; +fail: + return ret; +} + +/* power up tuner */ +int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff) +{ + mxl_debug("(%d)", onoff); + + return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00); +} + +int mxl111sf_disable_656_port(struct mxl111sf_state *state) +{ + mxl_debug("()"); + + return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00); +} + +int mxl111sf_enable_usb_output(struct mxl111sf_state *state) +{ + mxl_debug("()"); + + return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00); +} + +/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */ +int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, + unsigned int parallel_serial, + unsigned int msb_lsb_1st, + unsigned int clock_phase, + unsigned int mpeg_valid_pol, + unsigned int mpeg_sync_pol) +{ + int ret; + u8 mode, tmp; + + mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st, + clock_phase, mpeg_valid_pol, mpeg_sync_pol); + + /* Enable PIN MUX */ + ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX); + mxl_fail(ret); + + /* Configure MPEG Clock phase */ + mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode); + + if (clock_phase == TSIF_NORMAL) + mode &= ~V6_INVERTED_CLK_PHASE; + else + mode |= V6_INVERTED_CLK_PHASE; + + ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode); + mxl_fail(ret); + + /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity + * Get current configuration */ + ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode); + mxl_fail(ret); + + /* Data Input mode */ + if (parallel_serial == TSIF_INPUT_PARALLEL) { + /* Disable serial mode */ + mode &= ~V6_MPEG_IN_DATA_SERIAL; + + /* Enable Parallel mode */ + mode |= V6_MPEG_IN_DATA_PARALLEL; + } else { + /* Disable Parallel mode */ + mode &= ~V6_MPEG_IN_DATA_PARALLEL; + + /* Enable Serial Mode */ + mode |= V6_MPEG_IN_DATA_SERIAL; + + /* If serial interface is chosen, configure + MSB or LSB order in transmission */ + ret = mxl111sf_read_reg(state, + V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, + &tmp); + mxl_fail(ret); + + if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED) + tmp |= V6_MPEG_SER_MSB_FIRST; + else + tmp &= ~V6_MPEG_SER_MSB_FIRST; + + ret = mxl111sf_write_reg(state, + V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, + tmp); + mxl_fail(ret); + } + + /* MPEG Sync polarity */ + if (mpeg_sync_pol == TSIF_NORMAL) + mode &= ~V6_INVERTED_MPEG_SYNC; + else + mode |= V6_INVERTED_MPEG_SYNC; + + /* MPEG Valid polarity */ + if (mpeg_valid_pol == 0) + mode &= ~V6_INVERTED_MPEG_VALID; + else + mode |= V6_INVERTED_MPEG_VALID; + + ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode); + mxl_fail(ret); + + return ret; +} + +int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size) +{ + static struct mxl111sf_reg_ctrl_info init_i2s[] = { + {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */ + {0x15, 0x60, 0x60}, /* Enable I2S */ + {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB, + Inverted 656 Clock, I2S_SOFT_RESET, + 0 : Normal operation, 1 : Reset State */ +#if 0 + {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */ +#endif + {0x00, 0xff, 0x02}, /* Change to Control Page */ + {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */ + {0x00, 0xff, 0x00}, + {0, 0, 0} + }; + int ret; + + mxl_debug("(0x%02x)", sample_size); + + ret = mxl111sf_ctrl_program_regs(state, init_i2s); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size); + mxl_fail(ret); +fail: + return ret; +} + +int mxl111sf_disable_i2s_port(struct mxl111sf_state *state) +{ + static struct mxl111sf_reg_ctrl_info disable_i2s[] = { + {0x15, 0x40, 0x00}, + {0, 0, 0} + }; + + mxl_debug("()"); + + return mxl111sf_ctrl_program_regs(state, disable_i2s); +} + +int mxl111sf_config_i2s(struct mxl111sf_state *state, + u8 msb_start_pos, u8 data_width) +{ + int ret; + u8 tmp; + + mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width); + + ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp); + if (mxl_fail(ret)) + goto fail; + + tmp &= 0xe0; + tmp |= msb_start_pos; + ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp); + if (mxl_fail(ret)) + goto fail; + + tmp &= 0xe0; + tmp |= data_width; + ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp); + mxl_fail(ret); +fail: + return ret; +} + +int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) +{ + u8 val; + int ret; + + mxl_debug("(%d)", onoff); + + ret = mxl111sf_write_reg(state, 0x00, 0x02); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val); + if (mxl_fail(ret)) + goto fail; + + if (onoff) + val |= 0x04; + else + val &= ~0x04; + + ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_write_reg(state, 0x00, 0x00); + if (mxl_fail(ret)) + goto fail; +fail: + return ret; +} + +int mxl111sf_idac_config(struct mxl111sf_state *state, + u8 control_mode, u8 current_setting, + u8 current_value, u8 hysteresis_value) +{ + int ret; + u8 val; + /* current value will be set for both automatic & manual IDAC control */ + val = current_value; + + if (control_mode == IDAC_MANUAL_CONTROL) { + /* enable manual control of IDAC */ + val |= IDAC_MANUAL_CONTROL_BIT_MASK; + + if (current_setting == IDAC_CURRENT_SINKING_ENABLE) + /* enable current sinking in manual mode */ + val |= IDAC_CURRENT_SINKING_BIT_MASK; + else + /* disable current sinking in manual mode */ + val &= ~IDAC_CURRENT_SINKING_BIT_MASK; + } else { + /* disable manual control of IDAC */ + val &= ~IDAC_MANUAL_CONTROL_BIT_MASK; + + /* set hysteresis value reg: 0x0B<5:0> */ + ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, + (hysteresis_value & 0x3F)); + } + + ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); + + return val; +} + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h new file mode 100644 index 000000000000..f0756071d347 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h @@ -0,0 +1,53 @@ +/* + * mxl111sf-phy.h - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DVB_USB_MXL111SF_PHY_H_ +#define _DVB_USB_MXL111SF_PHY_H_ + +#include "mxl111sf.h" + +int mxl1x1sf_soft_reset(struct mxl111sf_state *state); +int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode); +int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff); +int mxl111sf_disable_656_port(struct mxl111sf_state *state); +int mxl111sf_init_tuner_demod(struct mxl111sf_state *state); +int mxl111sf_enable_usb_output(struct mxl111sf_state *state); +int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, + unsigned int parallel_serial, + unsigned int msb_lsb_1st, + unsigned int clock_phase, + unsigned int mpeg_valid_pol, + unsigned int mpeg_sync_pol); +int mxl111sf_config_i2s(struct mxl111sf_state *state, + u8 msb_start_pos, u8 data_width); +int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size); +int mxl111sf_disable_i2s_port(struct mxl111sf_state *state); +int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff); +int mxl111sf_idac_config(struct mxl111sf_state *state, + u8 control_mode, u8 current_setting, + u8 current_value, u8 hysteresis_value); + +#endif /* _DVB_USB_MXL111SF_PHY_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h new file mode 100644 index 000000000000..17831b0fb9db --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h @@ -0,0 +1,179 @@ +/* + * mxl111sf-reg.h - driver for the MaxLinear MXL111SF + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DVB_USB_MXL111SF_REG_H_ +#define _DVB_USB_MXL111SF_REG_H_ + +#define CHIP_ID_REG 0xFC +#define TOP_CHIP_REV_ID_REG 0xFA + +#define V6_SNR_RB_LSB_REG 0x27 +#define V6_SNR_RB_MSB_REG 0x28 + +#define V6_N_ACCUMULATE_REG 0x11 +#define V6_RS_AVG_ERRORS_LSB_REG 0x2C +#define V6_RS_AVG_ERRORS_MSB_REG 0x2D + +#define V6_IRQ_STATUS_REG 0x24 +#define IRQ_MASK_FEC_LOCK 0x10 + +#define V6_SYNC_LOCK_REG 0x28 +#define SYNC_LOCK_MASK 0x10 + +#define V6_RS_LOCK_DET_REG 0x28 +#define RS_LOCK_DET_MASK 0x08 + +#define V6_INITACQ_NODETECT_REG 0x20 +#define V6_FORCE_NFFT_CPSIZE_REG 0x20 + +#define V6_CODE_RATE_TPS_REG 0x29 +#define V6_CODE_RATE_TPS_MASK 0x07 + + +#define V6_CP_LOCK_DET_REG 0x28 +#define V6_CP_LOCK_DET_MASK 0x04 + +#define V6_TPS_HIERACHY_REG 0x29 +#define V6_TPS_HIERARCHY_INFO_MASK 0x40 + +#define V6_MODORDER_TPS_REG 0x2A +#define V6_PARAM_CONSTELLATION_MASK 0x30 + +#define V6_MODE_TPS_REG 0x2A +#define V6_PARAM_FFT_MODE_MASK 0x0C + + +#define V6_CP_TPS_REG 0x29 +#define V6_PARAM_GI_MASK 0x30 + +#define V6_TPS_LOCK_REG 0x2A +#define V6_PARAM_TPS_LOCK_MASK 0x40 + +#define V6_FEC_PER_COUNT_REG 0x2E +#define V6_FEC_PER_SCALE_REG 0x2B +#define V6_FEC_PER_SCALE_MASK 0x03 +#define V6_FEC_PER_CLR_REG 0x20 +#define V6_FEC_PER_CLR_MASK 0x01 + +#define V6_PIN_MUX_MODE_REG 0x1B +#define V6_ENABLE_PIN_MUX 0x1E + +#define V6_I2S_NUM_SAMPLES_REG 0x16 + +#define V6_MPEG_IN_CLK_INV_REG 0x17 +#define V6_MPEG_IN_CTRL_REG 0x18 + +#define V6_INVERTED_CLK_PHASE 0x20 +#define V6_MPEG_IN_DATA_PARALLEL 0x01 +#define V6_MPEG_IN_DATA_SERIAL 0x02 + +#define V6_INVERTED_MPEG_SYNC 0x04 +#define V6_INVERTED_MPEG_VALID 0x08 + +#define TSIF_INPUT_PARALLEL 0 +#define TSIF_INPUT_SERIAL 1 +#define TSIF_NORMAL 0 + +#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG 0x19 +#define V6_MPEG_SER_MSB_FIRST 0x80 +#define MPEG_SER_MSB_FIRST_ENABLED 0x01 + +#define V6_656_I2S_BUFF_STATUS_REG 0x2F +#define V6_656_OVERFLOW_MASK_BIT 0x08 +#define V6_I2S_OVERFLOW_MASK_BIT 0x01 + +#define V6_I2S_STREAM_START_BIT_REG 0x14 +#define V6_I2S_STREAM_END_BIT_REG 0x15 +#define I2S_RIGHT_JUSTIFIED 0 +#define I2S_LEFT_JUSTIFIED 1 +#define I2S_DATA_FORMAT 2 + +#define V6_TUNER_LOOP_THRU_CONTROL_REG 0x09 +#define V6_ENABLE_LOOP_THRU 0x01 + +#define TOTAL_NUM_IF_OUTPUT_FREQ 16 + +#define TUNER_NORMAL_IF_SPECTRUM 0x0 +#define TUNER_INVERT_IF_SPECTRUM 0x10 + +#define V6_TUNER_IF_SEL_REG 0x06 +#define V6_TUNER_IF_FCW_REG 0x3C +#define V6_TUNER_IF_FCW_BYP_REG 0x3D +#define V6_RF_LOCK_STATUS_REG 0x23 + +#define NUM_DIG_TV_CHANNEL 1000 + +#define V6_DIG_CLK_FREQ_SEL_REG 0x07 +#define V6_REF_SYNTH_INT_REG 0x5C +#define V6_REF_SYNTH_REMAIN_REG 0x58 +#define V6_DIG_RFREFSELECT_REG 0x32 +#define V6_XTAL_CLK_OUT_GAIN_REG 0x31 +#define V6_TUNER_LOOP_THRU_CTRL_REG 0x09 +#define V6_DIG_XTAL_ENABLE_REG 0x06 +#define V6_DIG_XTAL_BIAS_REG 0x66 +#define V6_XTAL_CAP_REG 0x08 + +#define V6_GPO_CTRL_REG 0x18 +#define MXL_GPO_0 0x00 +#define MXL_GPO_1 0x01 +#define V6_GPO_0_MASK 0x10 +#define V6_GPO_1_MASK 0x20 + +#define V6_111SF_GPO_CTRL_REG 0x19 +#define MXL_111SF_GPO_1 0x00 +#define MXL_111SF_GPO_2 0x01 +#define MXL_111SF_GPO_3 0x02 +#define MXL_111SF_GPO_4 0x03 +#define MXL_111SF_GPO_5 0x04 +#define MXL_111SF_GPO_6 0x05 +#define MXL_111SF_GPO_7 0x06 + +#define MXL_111SF_GPO_0_MASK 0x01 +#define MXL_111SF_GPO_1_MASK 0x02 +#define MXL_111SF_GPO_2_MASK 0x04 +#define MXL_111SF_GPO_3_MASK 0x08 +#define MXL_111SF_GPO_4_MASK 0x10 +#define MXL_111SF_GPO_5_MASK 0x20 +#define MXL_111SF_GPO_6_MASK 0x40 + +#define V6_ATSC_CONFIG_REG 0x0A + +#define MXL_MODE_REG 0x03 +#define START_TUNE_REG 0x1C + +#define V6_IDAC_HYSTERESIS_REG 0x0B +#define V6_IDAC_SETTINGS_REG 0x0C +#define IDAC_MANUAL_CONTROL 1 +#define IDAC_CURRENT_SINKING_ENABLE 1 +#define IDAC_MANUAL_CONTROL_BIT_MASK 0x80 +#define IDAC_CURRENT_SINKING_BIT_MASK 0x40 + +#define V8_SPI_MODE_REG 0xE9 + +#define V6_DIG_RF_PWR_LSB_REG 0x46 +#define V6_DIG_RF_PWR_MSB_REG 0x47 + +#endif /* _DVB_USB_MXL111SF_REG_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c new file mode 100644 index 000000000000..a6341058c4e7 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c @@ -0,0 +1,476 @@ +/* + * mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "mxl111sf-tuner.h" +#include "mxl111sf-phy.h" +#include "mxl111sf-reg.h" + +/* debug */ +static int mxl111sf_tuner_debug; +module_param_named(debug, mxl111sf_tuner_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +#define mxl_dbg(fmt, arg...) \ + if (mxl111sf_tuner_debug) \ + mxl_printk(KERN_DEBUG, fmt, ##arg) + +/* ------------------------------------------------------------------------ */ + +struct mxl111sf_tuner_state { + struct mxl111sf_state *mxl_state; + + struct mxl111sf_tuner_config *cfg; + + u32 frequency; + u32 bandwidth; +}; + +static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state, + u8 addr, u8 *data) +{ + return (state->cfg->read_reg) ? + state->cfg->read_reg(state->mxl_state, addr, data) : + -EINVAL; +} + +static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state, + u8 addr, u8 data) +{ + return (state->cfg->write_reg) ? + state->cfg->write_reg(state->mxl_state, addr, data) : + -EINVAL; +} + +static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state, + struct mxl111sf_reg_ctrl_info *ctrl_reg_info) +{ + return (state->cfg->program_regs) ? + state->cfg->program_regs(state->mxl_state, ctrl_reg_info) : + -EINVAL; +} + +static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state, + int onoff) +{ + return (state->cfg->top_master_ctrl) ? + state->cfg->top_master_ctrl(state->mxl_state, onoff) : + -EINVAL; +} + +/* ------------------------------------------------------------------------ */ + +static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = { + {0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3, + DIG_MODEINDEX, _A, _CSF, */ + {0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */ + {0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */ + {0, 0, 0} +}; + +/* ------------------------------------------------------------------------ */ + +static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq, + u8 bw) +{ + u8 filt_bw; + + /* set channel bandwidth */ + switch (bw) { + case 0: /* ATSC */ + filt_bw = 25; + break; + case 1: /* QAM */ + filt_bw = 69; + break; + case 6: + filt_bw = 21; + break; + case 7: + filt_bw = 42; + break; + case 8: + filt_bw = 63; + break; + default: + err("%s: invalid bandwidth setting!", __func__); + return NULL; + } + + /* calculate RF channel */ + freq /= 1000000; + + freq *= 64; +#if 0 + /* do round */ + freq += 0.5; +#endif + /* set bandwidth */ + mxl_phy_tune_rf[0].data = filt_bw; + + /* set RF */ + mxl_phy_tune_rf[1].data = (freq & 0xff); + mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff; + + /* start tune */ + return mxl_phy_tune_rf; +} + +static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state) +{ + int ret; + u8 ctrl; +#if 0 + u16 iffcw; + u32 if_freq; +#endif + mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)", + state->cfg->invert_spectrum, state->cfg->if_freq); + + /* set IF polarity */ + ctrl = state->cfg->invert_spectrum; + + ctrl |= state->cfg->if_freq; + + ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl); + if (mxl_fail(ret)) + goto fail; + +#if 0 + if_freq /= 1000000; + + /* do round */ + if_freq += 0.5; + + if (MXL_IF_LO == state->cfg->if_freq) { + ctrl = 0x08; + iffcw = (u16)(if_freq / (108 * 4096)); + } else if (MXL_IF_HI == state->cfg->if_freq) { + ctrl = 0x08; + iffcw = (u16)(if_freq / (216 * 4096)); + } else { + ctrl = 0; + iffcw = 0; + } + + ctrl |= (iffcw >> 8); +#endif + ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl); + if (mxl_fail(ret)) + goto fail; + + ctrl &= 0xf0; + ctrl |= 0x90; + + ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl); + if (mxl_fail(ret)) + goto fail; + +#if 0 + ctrl = iffcw & 0x00ff; +#endif + ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl); + mxl_fail(ret); +fail: + return ret; +} + +static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + static struct mxl111sf_reg_ctrl_info *reg_ctrl_array; + int ret; + u8 mxl_mode; + + mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw); + + /* stop tune */ + ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0); + if (mxl_fail(ret)) + goto fail; + + /* check device mode */ + ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode); + if (mxl_fail(ret)) + goto fail; + + /* Fill out registers for channel tune */ + reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw); + if (!reg_ctrl_array) + return -EINVAL; + + ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array); + if (mxl_fail(ret)) + goto fail; + + if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) { + /* IF tuner mode only */ + mxl1x1sf_tuner_top_master_ctrl(state, 0); + mxl1x1sf_tuner_top_master_ctrl(state, 1); + mxl1x1sf_tuner_set_if_output_freq(state); + } + + ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1); + if (mxl_fail(ret)) + goto fail; + + if (state->cfg->ant_hunt) + state->cfg->ant_hunt(fe); +fail: + return ret; +} + +static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state, + int *rf_synth_lock, + int *ref_synth_lock) +{ + int ret; + u8 data; + + *rf_synth_lock = 0; + *ref_synth_lock = 0; + + ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data); + if (mxl_fail(ret)) + goto fail; + + *ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0; + *rf_synth_lock = ((data & 0x0c) == 0x0c) ? 1 : 0; +fail: + return ret; +} + +#if 0 +static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state, + int onoff) +{ + return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG, + onoff ? 1 : 0); +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int mxl111sf_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + int ret; + u8 bw; + + mxl_dbg("()"); + + if (fe->ops.info.type == FE_ATSC) { + switch (params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + bw = 0; /* ATSC */ + break; + case QAM_64: + case QAM_256: + bw = 1; /* US CABLE */ + break; + default: + err("%s: modulation not set!", __func__); + return -EINVAL; + } + } else if (fe->ops.info.type == FE_OFDM) { + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + bw = 6; + break; + case BANDWIDTH_7_MHZ: + bw = 7; + break; + case BANDWIDTH_8_MHZ: + bw = 8; + break; + default: + err("%s: bandwidth not set!", __func__); + return -EINVAL; + } + } else { + err("%s: modulation type not supported!", __func__); + return -EINVAL; + } + ret = mxl1x1sf_tune_rf(fe, params->frequency, bw); + if (mxl_fail(ret)) + goto fail; + + state->frequency = params->frequency; + state->bandwidth = (fe->ops.info.type == FE_OFDM) ? + params->u.ofdm.bandwidth : 0; +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +#if 0 +static int mxl111sf_tuner_init(struct dvb_frontend *fe) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + int ret; + + /* wake from standby handled by usb driver */ + + return ret; +} + +static int mxl111sf_tuner_sleep(struct dvb_frontend *fe) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + int ret; + + /* enter standby mode handled by usb driver */ + + return ret; +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + int rf_locked, ref_locked, ret; + + *status = 0; + + ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked); + if (mxl_fail(ret)) + goto fail; + mxl_info("%s%s", rf_locked ? "rf locked " : "", + ref_locked ? "ref locked" : ""); + + if ((rf_locked) || (ref_locked)) + *status |= TUNER_STATUS_LOCKED; +fail: + return ret; +} + +static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + u8 val1, val2; + int ret; + + *strength = 0; + + ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2); + if (mxl_fail(ret)) + goto fail; + + *strength = val1 | ((val2 & 0x07) << 8); +fail: + ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00); + mxl_fail(ret); + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + *frequency = state->frequency; + return 0; +} + +static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + *bandwidth = state->bandwidth; + return 0; +} + +static int mxl111sf_tuner_release(struct dvb_frontend *fe) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + mxl_dbg("()"); + kfree(state); + fe->tuner_priv = NULL; + return 0; +} + +/* ------------------------------------------------------------------------- */ + +static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = { + .info = { + .name = "MaxLinear MxL111SF", +#if 0 + .frequency_min = , + .frequency_max = , + .frequency_step = , +#endif + }, +#if 0 + .init = mxl111sf_tuner_init, + .sleep = mxl111sf_tuner_sleep, +#endif + .set_params = mxl111sf_tuner_set_params, + .get_status = mxl111sf_tuner_get_status, + .get_rf_strength = mxl111sf_get_rf_strength, + .get_frequency = mxl111sf_tuner_get_frequency, + .get_bandwidth = mxl111sf_tuner_get_bandwidth, + .release = mxl111sf_tuner_release, +}; + +struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, + struct mxl111sf_state *mxl_state, + struct mxl111sf_tuner_config *cfg) +{ + struct mxl111sf_tuner_state *state = NULL; + + mxl_dbg("()"); + + state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + state->mxl_state = mxl_state; + state->cfg = cfg; + + memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = state; + return fe; +} +EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach); + +MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver"); +MODULE_AUTHOR("Michael Krufky "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1"); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h new file mode 100644 index 000000000000..ff333960b184 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h @@ -0,0 +1,89 @@ +/* + * mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner + * + * Copyright (C) 2010 Michael Krufky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MXL111SF_TUNER_H__ +#define __MXL111SF_TUNER_H__ + +#include "dvb_frontend.h" + +#include "mxl111sf.h" + +enum mxl_if_freq { +#if 0 + MXL_IF_LO = 0x00, /* other IF < 9MHz */ +#endif + MXL_IF_4_0 = 0x01, /* 4.0 MHz */ + MXL_IF_4_5 = 0x02, /* 4.5 MHz */ + MXL_IF_4_57 = 0x03, /* 4.57 MHz */ + MXL_IF_5_0 = 0x04, /* 5.0 MHz */ + MXL_IF_5_38 = 0x05, /* 5.38 MHz */ + MXL_IF_6_0 = 0x06, /* 6.0 MHz */ + MXL_IF_6_28 = 0x07, /* 6.28 MHz */ + MXL_IF_7_2 = 0x08, /* 7.2 MHz */ + MXL_IF_35_25 = 0x09, /* 35.25 MHz */ + MXL_IF_36 = 0x0a, /* 36 MHz */ + MXL_IF_36_15 = 0x0b, /* 36.15 MHz */ + MXL_IF_44 = 0x0c, /* 44 MHz */ +#if 0 + MXL_IF_HI = 0x0f, /* other IF > 35 MHz and < 45 MHz */ +#endif +}; + +struct mxl111sf_tuner_config { + enum mxl_if_freq if_freq; + unsigned int invert_spectrum:1; + + int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data); + int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data); + int (*program_regs)(struct mxl111sf_state *state, + struct mxl111sf_reg_ctrl_info *ctrl_reg_info); + int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff); + int (*ant_hunt)(struct dvb_frontend *fe); +}; + +/* ------------------------------------------------------------------------ */ + +#if defined(CONFIG_DVB_USB_MXL111SF) || \ + (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE)) +extern +struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, + struct mxl111sf_state *mxl_state, + struct mxl111sf_tuner_config *cfg); +#else +static inline +struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, + struct mxl111sf_state *mxl_state + struct mxl111sf_tuner_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif /* __MXL111SF_TUNER_H__ */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ + diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c new file mode 100644 index 000000000000..3da452a1a06f --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf.c @@ -0,0 +1,854 @@ +/* + * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ + +#include +#include + +#include "mxl111sf.h" +#include "mxl111sf-reg.h" +#include "mxl111sf-phy.h" +#include "mxl111sf-i2c.h" +#include "mxl111sf-gpio.h" + +#include "mxl111sf-tuner.h" + +#include "lgdt3305.h" + +int dvb_usb_mxl111sf_debug; +module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level " + "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); + +int dvb_usb_mxl111sf_isoc; +module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644); +MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc)."); + +#define ANT_PATH_AUTO 0 +#define ANT_PATH_EXTERNAL 1 +#define ANT_PATH_INTERNAL 2 + +int dvb_usb_mxl111sf_rfswitch = +#if 0 + ANT_PATH_AUTO; +#else + ANT_PATH_EXTERNAL; +#endif + +module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644); +MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int)."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_info(args...) dprintk(dvb_usb_mxl111sf_debug, 0x13, args) +#define deb_reg(args...) dprintk(dvb_usb_mxl111sf_debug, 0x08, args) +#define deb_adv(args...) dprintk(dvb_usb_mxl111sf_debug, MXL_ADV_DBG, args) + +int mxl111sf_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + int ret; + u8 sndbuf[1+wlen]; + + deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen); + + memset(sndbuf, 0, 1+wlen); + + sndbuf[0] = cmd; + memcpy(&sndbuf[1], wbuf, wlen); + + ret = (wo) ? dvb_usb_generic_write(d, sndbuf, 1+wlen) : + dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); + mxl_fail(ret); + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +#define MXL_CMD_REG_READ 0xaa +#define MXL_CMD_REG_WRITE 0x55 + +int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data) +{ + u8 buf[2]; + int ret; + + ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2); + if (mxl_fail(ret)) { + mxl_debug("error reading reg: 0x%02x", addr); + goto fail; + } + + if (buf[0] == addr) + *data = buf[1]; + else { + err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x", + addr, buf[0], buf[1]); + ret = -EINVAL; + } + + deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data); +fail: + return ret; +} + +int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data) +{ + u8 buf[] = { addr, data }; + int ret; + + deb_reg("W: (0x%02x, 0x%02x)\n", addr, data); + + ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0); + if (mxl_fail(ret)) + err("error writing reg: 0x%02x, val: 0x%02x", addr, data); + return ret; +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_write_reg_mask(struct mxl111sf_state *state, + u8 addr, u8 mask, u8 data) +{ + int ret; + u8 val; + + if (mask != 0xff) { + ret = mxl111sf_read_reg(state, addr, &val); +#if 1 + /* dont know why this usually errors out on the first try */ + if (mxl_fail(ret)) + err("error writing addr: 0x%02x, mask: 0x%02x, " + "data: 0x%02x, retrying...", addr, mask, data); + + ret = mxl111sf_read_reg(state, addr, &val); +#endif + if (mxl_fail(ret)) + goto fail; + } + val &= ~mask; + val |= data; + + ret = mxl111sf_write_reg(state, addr, val); + mxl_fail(ret); +fail: + return ret; +} + +/* ------------------------------------------------------------------------ */ + +int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, + struct mxl111sf_reg_ctrl_info *ctrl_reg_info) +{ + int i, ret = 0; + + for (i = 0; ctrl_reg_info[i].addr | + ctrl_reg_info[i].mask | + ctrl_reg_info[i].data; i++) { + + ret = mxl111sf_write_reg_mask(state, + ctrl_reg_info[i].addr, + ctrl_reg_info[i].mask, + ctrl_reg_info[i].data); + if (mxl_fail(ret)) { + err("failed on reg #%d (0x%02x)", i, + ctrl_reg_info[i].addr); + break; + } + } + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state) +{ + int ret; + u8 id, ver; + char *mxl_chip, *mxl_rev; + + if ((state->chip_id) && (state->chip_ver)) + return 0; + + ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id); + if (mxl_fail(ret)) + goto fail; + state->chip_id = id; + + ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver); + if (mxl_fail(ret)) + goto fail; + state->chip_ver = ver; + + switch (id) { + case 0x61: + mxl_chip = "MxL101SF"; + break; + case 0x63: + mxl_chip = "MxL111SF"; + break; + default: + mxl_chip = "UNKNOWN MxL1X1"; + break; + } + switch (ver) { + case 0x36: + state->chip_rev = MXL111SF_V6; + mxl_rev = "v6"; + break; + case 0x08: + state->chip_rev = MXL111SF_V8_100; + mxl_rev = "v8_100"; + break; + case 0x18: + state->chip_rev = MXL111SF_V8_200; + mxl_rev = "v8_200"; + break; + default: + state->chip_rev = 0; + mxl_rev = "UNKNOWN REVISION"; + break; + } + info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver); +fail: + return ret; +} + +#define get_chip_info(state) \ +({ \ + int ___ret; \ + ___ret = mxl1x1sf_get_chip_info(state); \ + if (mxl_fail(___ret)) { \ + mxl_debug("failed to get chip info" \ + " on first probe attempt"); \ + ___ret = mxl1x1sf_get_chip_info(state); \ + if (mxl_fail(___ret)) \ + err("failed to get chip info during probe"); \ + else \ + mxl_debug("probe needed a retry " \ + "in order to succeed."); \ + } \ + ___ret; \ +}) + +/* ------------------------------------------------------------------------ */ + +static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + /* power control depends on which adapter is being woken: + * save this for init, instead, via mxl111sf_adap_fe_init */ + return 0; +} + +static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + struct mxl111sf_adap_state *adap_state = adap->priv; + int err; + + /* exit if we didnt initialize the driver yet */ + if (!state->chip_id) { + mxl_debug("driver not yet initialized, exit."); + goto fail; + } + + deb_info("%s()\n", __func__); + + mutex_lock(&state->fe_lock); + + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + err = mxl1x1sf_soft_reset(state); + mxl_fail(err); + err = mxl111sf_init_tuner_demod(state); + mxl_fail(err); + err = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + + mxl_fail(err); + mxl111sf_enable_usb_output(state); + mxl_fail(err); + mxl1x1sf_top_master_ctrl(state, 1); + mxl_fail(err); + + if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) && + (state->chip_rev > MXL111SF_V6)) { + mxl111sf_config_pin_mux_modes(state, + PIN_MUX_TS_SPI_IN_MODE_1); + mxl_fail(err); + } + err = mxl111sf_init_port_expander(state); + if (!mxl_fail(err)) { + state->gpio_mode = adap_state->gpio_mode; + err = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + mxl_fail(err); +#if 0 + err = fe->ops.init(fe); +#endif + msleep(100); /* add short delay after enabling + * the demod before touching it */ + } + + return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0; +fail: + return -ENODEV; +} + +static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + struct mxl111sf_adap_state *adap_state = adap->priv; + int err; + + /* exit if we didnt initialize the driver yet */ + if (!state->chip_id) { + mxl_debug("driver not yet initialized, exit."); + goto fail; + } + + deb_info("%s()\n", __func__); + + err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0; + + mutex_unlock(&state->fe_lock); + + return err; +fail: + return -ENODEV; +} + + +static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + struct mxl111sf_adap_state *adap_state = adap->priv; + int ret = 0; + u8 tmp; + + deb_info("%s(%d)\n", __func__, onoff); + + if (onoff) { + ret = mxl111sf_enable_usb_output(state); + mxl_fail(ret); + ret = mxl111sf_config_mpeg_in(state, 1, 1, + adap_state->ep6_clockphase, + 0, 0); + mxl_fail(ret); + } else { + ret = mxl111sf_disable_656_port(state); + mxl_fail(ret); + } + + mxl111sf_read_reg(state, 0x12, &tmp); + tmp &= ~0x04; + mxl111sf_write_reg(state, 0x12, tmp); + + return ret; +} + +/* ------------------------------------------------------------------------ */ + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0xb2 >> 1, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 0, + .qam_if_khz = 6000, + .vsb_if_khz = 6000, +}; + +static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + struct mxl111sf_adap_state *adap_state = adap->priv; + int ret; + + deb_adv("%s()\n", __func__); + + /* save a pointer to the dvb_usb_device in device state */ + state->d = d; + adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; + state->alt_mode = adap_state->alt_mode; + + if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0) + err("set interface failed"); + + state->gpio_mode = MXL111SF_GPIO_MOD_ATSC; + adap_state->gpio_mode = state->gpio_mode; + adap_state->device_mode = MXL_TUNER_MODE; + adap_state->ep6_clockphase = 1; + + ret = mxl1x1sf_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_init_tuner_demod(state); + if (mxl_fail(ret)) + goto fail; + + ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_enable_usb_output(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl1x1sf_top_master_ctrl(state, 1); + if (mxl_fail(ret)) + goto fail; + + ret = mxl111sf_init_port_expander(state); + if (mxl_fail(ret)) + goto fail; + ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); + if (mxl_fail(ret)) + goto fail; + + adap->fe[0] = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &adap->dev->i2c_adap); + if (adap->fe[0]) { + adap_state->fe_init = adap->fe[0]->ops.init; + adap->fe[0]->ops.init = mxl111sf_adap_fe_init; + adap_state->fe_sleep = adap->fe[0]->ops.sleep; + adap->fe[0]->ops.sleep = mxl111sf_adap_fe_sleep; + return 0; + } + ret = -EIO; +fail: + return ret; +} + +static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state, + int antpath) +{ + return mxl111sf_idac_config(state, 1, 1, + (antpath == ANT_PATH_INTERNAL) ? + 0x3f : 0x00, 0); +} + +#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \ + err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \ + __func__, __LINE__, \ + (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \ + pwr0, pwr1, pwr2, pwr3) + +#define ANT_HUNT_SLEEP 90 +#define ANT_EXT_TWEAK 0 + +static int mxl111sf_ant_hunt(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + + int antctrl = dvb_usb_mxl111sf_rfswitch; + + u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2; + + /* FIXME: must force EXTERNAL for QAM - done elsewhere */ + mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ? + ANT_PATH_EXTERNAL : antctrl); + + if (antctrl == ANT_PATH_AUTO) { +#if 0 + msleep(ANT_HUNT_SLEEP); +#endif + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA); + + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0); + + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1); + + mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL); + msleep(ANT_HUNT_SLEEP); + fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2); + + if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) { + /* return with EXTERNAL enabled */ + mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); + DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA, + rxPwr0, rxPwr1, rxPwr2); + } else { + /* return with INTERNAL enabled */ + DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA, + rxPwr0, rxPwr1, rxPwr2); + } + } + return 0; +} + +static struct mxl111sf_tuner_config mxl_tuner_config = { + .if_freq = MXL_IF_6_0, /* applies to external IF output, only */ + .invert_spectrum = 0, + .read_reg = mxl111sf_read_reg, + .write_reg = mxl111sf_write_reg, + .program_regs = mxl111sf_ctrl_program_regs, + .top_master_ctrl = mxl1x1sf_top_master_ctrl, + .ant_hunt = mxl111sf_ant_hunt, +}; + +static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + struct mxl111sf_state *state = d->priv; + + deb_adv("%s()\n", __func__); + + if (NULL != dvb_attach(mxl111sf_tuner_attach, adap->fe[0], state, + &mxl_tuner_config)) + return 0; + + return -EIO; +} + +static int mxl111sf_fe_ioctl_override(struct dvb_frontend *fe, + unsigned int cmd, void *parg, + unsigned int stage) +{ + int err = 0; + + switch (stage) { + case DVB_FE_IOCTL_PRE: + + switch (cmd) { + case FE_READ_SIGNAL_STRENGTH: + err = fe->ops.tuner_ops.get_rf_strength(fe, parg); + /* If no error occurs, prevent dvb-core from handling + * this IOCTL, otherwise return the error */ + if (0 == err) + err = 1; + break; + } + break; + + case DVB_FE_IOCTL_POST: + /* no post-ioctl handling required */ + break; + } + return err; +}; + +static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm mxl111sf_i2c_algo = { + .master_xfer = mxl111sf_i2c_xfer, + .functionality = mxl111sf_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties; +static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties; + +static int mxl111sf_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d = NULL; + + deb_adv("%s()\n", __func__); + + if (((dvb_usb_mxl111sf_isoc) && + (0 == dvb_usb_device_init(intf, + &mxl111sf_atsc_isoc_properties, + THIS_MODULE, &d, adapter_nr))) || + 0 == dvb_usb_device_init(intf, + &mxl111sf_atsc_bulk_properties, + THIS_MODULE, &d, adapter_nr) || 0) { + + struct mxl111sf_state *state = d->priv; + static u8 eeprom[256]; + struct i2c_client c; + int ret; + + ret = get_chip_info(state); + if (mxl_fail(ret)) + err("failed to get chip info during probe"); + + mutex_init(&state->fe_lock); + + if (state->chip_rev > MXL111SF_V6) + mxl111sf_config_pin_mux_modes(state, + PIN_MUX_TS_SPI_IN_MODE_1); + + c.adapter = &d->i2c_adap; + c.addr = 0xa0 >> 1; + + ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); + if (mxl_fail(ret)) + return 0; + tveeprom_hauppauge_analog(&c, &state->tv, + (0x84 == eeprom[0xa0]) ? + eeprom + 0xa0 : eeprom + 0x80); +#if 0 + switch (state->tv.model) { + case 117001: + case 126001: + case 138001: + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", + __func__, state->tv.model); + } +#endif + return 0; + } + err("Your device is not yet supported by this driver. " + "See kernellabs.com for more info"); + return -EINVAL; +} + +static struct usb_device_id mxl111sf_table[] = { +/* 0 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600) }, /* ATSC+ IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601) }, /* ATSC */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602) }, /* + */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603) }, /* ATSC+ */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604) }, /* DVBT */ +/* 5 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609) }, /* ATSC IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a) }, /* + IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b) }, /* ATSC+ IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c) }, /* DVBT IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653) }, /* ATSC+ */ +/*10 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b) }, /* ATSC+ IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700) }, /* ATSC+ sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701) }, /* ATSC sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702) }, /* + sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703) }, /* ATSC+ sw */ +/*15 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704) }, /* DVBT sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753) }, /* ATSC+ sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763) }, /* ATSC+ no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764) }, /* DVBT no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853) }, /* ATSC+ sw */ +/*20 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854) }, /* DVBT sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863) }, /* ATSC+ no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864) }, /* DVBT no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3) }, /* ATSC+ sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4) }, /* DVBT sw */ +/*25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3) }, /* ATSC+ no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4) }, /* DVBT no */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff) }, /* ATSC+ */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612) }, /* + */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613) }, /* ATSC+ */ +/*30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a) }, /* + IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b) }, /* ATSC+ IR */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757) }, /* ATSC+DVBT sw */ + { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767) }, /* ATSC+DVBT no */ + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, mxl111sf_table); + + +#define MXL111SF_EP6_BULK_STREAMING_CONFIG \ + .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \ + .stream = { \ + .type = USB_BULK, \ + .count = 5, \ + .endpoint = 0x06, \ + .u = { \ + .bulk = { \ + .buffersize = 8192, \ + } \ + } \ + } + +/* FIXME */ +#define MXL111SF_EP6_ISOC_STREAMING_CONFIG \ + .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \ + .stream = { \ + .type = USB_ISOC, \ + .count = 5, \ + .endpoint = 0x06, \ + .u = { \ + .isoc = { \ + .framesperurb = 24, \ + .framesize = 3072, \ + .interval = 1, \ + } \ + } \ + } + +#define MXL111SF_DEFAULT_DEVICE_PROPERTIES \ + .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ + .usb_ctrl = DEVICE_SPECIFIC, \ + /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), \ + EP6 BULK transfer (atsc/qam), \ + use usb alt setting 2 for EP4 BULK transfer (dvb-t), \ + EP6 ISOC transfer (atsc/qam), \ + */ \ + .power_ctrl = mxl111sf_power_ctrl, \ + .i2c_algo = &mxl111sf_i2c_algo, \ + .generic_bulk_ctrl_endpoint = MXL_EP2_REG_WRITE, \ + .generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \ + .size_of_priv = sizeof(struct mxl111sf_state) + +static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = { + MXL111SF_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .size_of_priv = sizeof(struct mxl111sf_adap_state), + .fe_ioctl_override = mxl111sf_fe_ioctl_override, + + .frontend_attach = mxl111sf_lgdt3305_frontend_attach, + .tuner_attach = mxl111sf_attach_tuner, + + MXL111SF_EP6_BULK_STREAMING_CONFIG, + }, + }, + .num_device_descs = 6, + .devices = { + { "Hauppauge 126xxx ATSC (bulk)", + { NULL }, + { &mxl111sf_table[1], &mxl111sf_table[5], + NULL }, + }, + { "Hauppauge 117xxx ATSC (bulk)", + { NULL }, + { &mxl111sf_table[12], + NULL }, + }, + { "Hauppauge 126xxx ATSC+ (bulk)", + { NULL }, + { &mxl111sf_table[0], &mxl111sf_table[3], + &mxl111sf_table[7], &mxl111sf_table[9], + &mxl111sf_table[10], NULL }, + }, + { "Hauppauge 117xxx ATSC+ (bulk)", + { NULL }, + { &mxl111sf_table[11], &mxl111sf_table[14], + &mxl111sf_table[16], &mxl111sf_table[17], + &mxl111sf_table[32], &mxl111sf_table[33], + NULL }, + }, + { "Hauppauge Mercury (tp-bulk)", + { NULL }, + { &mxl111sf_table[19], &mxl111sf_table[21], + &mxl111sf_table[23], &mxl111sf_table[25], + &mxl111sf_table[27], NULL }, + }, + { "Hauppauge WinTV-Aero-M", + { NULL }, + { &mxl111sf_table[29], &mxl111sf_table[31], + NULL }, + }, + } +}; + +static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties = { + MXL111SF_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .size_of_priv = sizeof(struct mxl111sf_adap_state), + .fe_ioctl_override = mxl111sf_fe_ioctl_override, + + .frontend_attach = mxl111sf_lgdt3305_frontend_attach, + .tuner_attach = mxl111sf_attach_tuner, + + MXL111SF_EP6_ISOC_STREAMING_CONFIG, + }, + }, + .num_device_descs = 6, + .devices = { + { "Hauppauge 126xxx ATSC (isoc)", + { NULL }, + { &mxl111sf_table[1], &mxl111sf_table[5], + NULL }, + }, + { "Hauppauge 117xxx ATSC (isoc)", + { NULL }, + { &mxl111sf_table[12], + NULL }, + }, + { "Hauppauge 126xxx ATSC+ (isoc)", + { NULL }, + { &mxl111sf_table[0], &mxl111sf_table[3], + &mxl111sf_table[7], &mxl111sf_table[9], + &mxl111sf_table[10], NULL }, + }, + { "Hauppauge 117xxx ATSC+ (isoc)", + { NULL }, + { &mxl111sf_table[11], &mxl111sf_table[14], + &mxl111sf_table[16], &mxl111sf_table[17], + &mxl111sf_table[32], &mxl111sf_table[33], + NULL }, + }, + { "Hauppauge Mercury (tp-isoc)", + { NULL }, + { &mxl111sf_table[19], &mxl111sf_table[21], + &mxl111sf_table[23], &mxl111sf_table[25], + &mxl111sf_table[27], NULL }, + }, + { "Hauppauge WinTV-Aero-M (tp-isoc)", + { NULL }, + { &mxl111sf_table[29], &mxl111sf_table[31], + NULL }, + }, + } +}; + +static struct usb_driver mxl111sf_driver = { + .name = "dvb_usb_mxl111sf", + .probe = mxl111sf_probe, + .disconnect = dvb_usb_device_exit, + .id_table = mxl111sf_table, +}; + +static int __init mxl111sf_module_init(void) +{ + int result = usb_register(&mxl111sf_driver); + if (result) { + err("usb_register failed. Error number %d", result); + return result; + } + + return 0; +} + +static void __exit mxl111sf_module_exit(void) +{ + usb_deregister(&mxl111sf_driver); +} + +module_init(mxl111sf_module_init); +module_exit(mxl111sf_module_exit); + +MODULE_AUTHOR("Michael Krufky "); +MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h new file mode 100644 index 000000000000..5a2c7bb386cd --- /dev/null +++ b/drivers/media/dvb/dvb-usb/mxl111sf.h @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ + +#ifndef _DVB_USB_MXL111SF_H_ +#define _DVB_USB_MXL111SF_H_ + +#ifdef DVB_USB_LOG_PREFIX +#undef DVB_USB_LOG_PREFIX +#endif +#define DVB_USB_LOG_PREFIX "mxl111sf" +#include "dvb-usb.h" +#include + +#define MXL_EP1_REG_READ 1 +#define MXL_EP2_REG_WRITE 2 +#define MXL_EP3_INTERRUPT 3 +#define MXL_EP4_MPEG2 4 +#define MXL_EP5_I2S 5 +#define MXL_EP6_656 6 +#define MXL_EP6_MPEG2 6 + +#ifdef USING_ENUM_mxl111sf_current_mode +enum mxl111sf_current_mode { + mxl_mode_dvbt = MXL_EP4_MPEG2, + mxl_mode_mh = MXL_EP5_I2S, + mxl_mode_atsc = MXL_EP6_MPEG2, +}; +#endif + +enum mxl111sf_gpio_port_expander { + mxl111sf_gpio_hw, + mxl111sf_PCA9534, +}; + +struct mxl111sf_state { + struct dvb_usb_device *d; + + enum mxl111sf_gpio_port_expander gpio_port_expander; + u8 port_expander_addr; + + u8 chip_id; + u8 chip_ver; +#define MXL111SF_V6 1 +#define MXL111SF_V8_100 2 +#define MXL111SF_V8_200 3 + u8 chip_rev; + +#ifdef USING_ENUM_mxl111sf_current_mode + enum mxl111sf_current_mode current_mode; +#endif + +#define MXL_TUNER_MODE 0 +#define MXL_SOC_MODE 1 +#define MXL_DEV_MODE_MASK 0x01 +#if 1 + int device_mode; +#endif + /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), + EP5 BULK transfer (atsc-mh), + EP6 BULK transfer (atsc/qam), + use usb alt setting 2 for EP4 BULK transfer (dvb-t), + EP5 ISOC transfer (atsc-mh), + EP6 ISOC transfer (atsc/qam), + */ + int alt_mode; + int gpio_mode; + struct tveeprom tv; + + struct mutex fe_lock; +}; + +struct mxl111sf_adap_state { + int alt_mode; + int gpio_mode; + int device_mode; + int ep6_clockphase; + int (*fe_init)(struct dvb_frontend *); + int (*fe_sleep)(struct dvb_frontend *); +}; + +int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data); +int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data); + +struct mxl111sf_reg_ctrl_info { + u8 addr; + u8 mask; + u8 data; +}; + +int mxl111sf_write_reg_mask(struct mxl111sf_state *state, + u8 addr, u8 mask, u8 data); +int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, + struct mxl111sf_reg_ctrl_info *ctrl_reg_info); + +/* needed for hardware i2c functions in mxl111sf-i2c.c: + * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */ +int mxl111sf_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen); + +#define mxl_printk(kern, fmt, arg...) \ + printk(kern "%s: " fmt "\n", __func__, ##arg) + +#define mxl_info(fmt, arg...) \ + mxl_printk(KERN_INFO, fmt, ##arg) + +extern int dvb_usb_mxl111sf_debug; +#define mxl_debug(fmt, arg...) \ + if (dvb_usb_mxl111sf_debug) \ + mxl_printk(KERN_DEBUG, fmt, ##arg) + +#define MXL_I2C_DBG 0x04 +#define MXL_ADV_DBG 0x10 +#define mxl_debug_adv(fmt, arg...) \ + if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \ + mxl_printk(KERN_DEBUG, fmt, ##arg) + +#define mxl_i2c(fmt, arg...) \ + if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \ + mxl_printk(KERN_DEBUG, fmt, ##arg) + +#define mxl_i2c_adv(fmt, arg...) \ + if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \ + (MXL_I2C_DBG | MXL_ADV_DBG)) \ + mxl_printk(KERN_DEBUG, fmt, ##arg) + +/* The following allows the mxl_fail() macro defined below to work + * in externel modules, such as mxl111sf-tuner.ko, even though + * dvb_usb_mxl111sf_debug is not defined within those modules */ +#ifdef __MXL111SF_TUNER_H__ +#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG +#else +#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug +#endif + +#define mxl_fail(ret) \ +({ \ + int __ret; \ + __ret = (ret < 0); \ + if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG)) \ + mxl_printk(KERN_ERR, "error %d on line %d", \ + ret, __LINE__); \ + __ret; \ +}) + +#endif /* _DVB_USB_MXL111SF_H_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ -- 2.39.5