From 4df64c3e58d28ffc5c61bdbdd733c5d0303b9f3c Mon Sep 17 00:00:00 2001 From: John Rigby Date: Wed, 9 Jul 2008 14:54:01 -0600 Subject: [PATCH] powerpc/mpc5121: Update device tree for MPC5121ADS evaluation board Current device tree is only bare bones. This patch adds nodes to make it a complete tree for the MPC5121ads. Added nodes include: mbx - opengl coprocessor nfc - nand flash controller cpld-pic - on board cpld rtc clock - clock control pmc - power management control gpio mscan - can module i2c axe - audio coprocessor display - display interface unit mdio ethernet usb ioctl - pin config pata ac97 - PSC configured as AC97 pscfifo - psc fifo configuration dma pci Fix typo in header changing MDS to ADS. Add a compatible property of the form "fsl,mpc5121-..." to nodes missing one. Changed localbus compatible to fsl,mpc5121-localbus, this does not break anything because the only code that uses it finds it via the node name, not compatible. Signed-off-by: John Rigby Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/mpc5121ads.dts | 310 ++++++++++++++++++++++++++- 1 file changed, 299 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index 94ad7b2b241e..1f9036c317b4 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -1,7 +1,7 @@ /* - * MPC5121E MDS Device Tree Source + * MPC5121E ADS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,6 +17,10 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + pci = &pci; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -39,8 +43,41 @@ reg = <0x00000000 0x10000000>; // 256MB at 0 }; + mbx@20000000 { + compatible = "fsl,mpc5121-mbx"; + reg = <0x20000000 0x4000>; + interrupts = <66 0x8>; + interrupt-parent = < &ipic >; + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x20000>; // 128K at 0x30000000 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; // 1M at 0x40000000 + interrupts = <6 8>; + interrupt-parent = < &ipic >; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <1>; + // ADS has two Hynix 512MB Nand flash chips in a single + // stacked package . + chips = <2>; + nand0@0 { + label = "nand0"; + reg = <0x00000000 0x02000000>; // first 32 MB of chip 0 + }; + nand1@20000000 { + label = "nand1"; + reg = <0x20000000 0x02000000>; // first 32 MB of chip 1 + }; + }; + localbus@80000020 { - compatible = "fsl,mpc5121ads-localbus"; + compatible = "fsl,mpc5121-localbus"; #address-cells = <2>; #size-cells = <1>; reg = <0x80000020 0x40>; @@ -51,14 +88,51 @@ flash@0,0 { compatible = "cfi-flash"; reg = <0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; bank-width = <4>; - device-width = <1>; + device-width = <2>; + protected@0 { + label = "protected"; + reg = <0x00000000 0x00040000>; // first sector is protected + read-only; + }; + filesystem@40000 { + label = "filesystem"; + reg = <0x00040000 0x03c00000>; // 60M for filesystem + }; + kernel@3c40000 { + label = "kernel"; + reg = <0x03c40000 0x00280000>; // 2.5M for kernel + }; + device-tree@3ec0000 { + label = "device-tree"; + reg = <0x03ec0000 0x00040000>; // one sector for device tree + }; + u-boot@3f00000 { + label = "u-boot"; + reg = <0x03f00000 0x00100000>; // 1M for u-boot + read-only; + }; }; board-control@2,0 { compatible = "fsl,mpc5121ads-cpld"; reg = <0x2 0x0 0x8000>; }; + + cpld_pic: pic@2,a { + compatible = "fsl,mpc5121ads-cpld-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2 0xa 0x5>; + interrupt-parent = < &ipic >; + // irq routing + // all irqs but touch screen are routed to irq0 (ipic 48) + // touch screen is statically routed to irq1 (ipic 17) + // so don't use it here + interrupts = <48 0x8>; + }; }; soc@80000000 { @@ -85,38 +159,252 @@ reg = <0xc00 0x100>; }; - // 512x PSCs are not 52xx PSCs compatible + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + interrupt-parent = < &ipic >; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + interrupt-parent = < &ipic >; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + interrupt-parent = < &ipic >; + }; + + mscan@1300 { + compatible = "fsl,mpc5121-mscan"; + cell-index = <0>; + interrupts = <12 0x8>; + interrupt-parent = < &ipic >; + reg = <0x1300 0x80>; + }; + + mscan@1380 { + compatible = "fsl,mpc5121-mscan"; + cell-index = <1>; + interrupts = <13 0x8>; + interrupt-parent = < &ipic >; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <0>; + reg = <0x1700 0x20>; + interrupts = <9 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <1>; + reg = <0x1720 0x20>; + interrupts = <10 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + cell-index = <2>; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = < &ipic >; + fsl5200-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-parent = < &ipic >; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu", "fsl-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = < &ipic >; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@2800 { + device_type = "network"; + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + interrupt-parent = < &ipic >; + phy-handle = < &phy >; + fsl,align-tx-packets = <4>; + }; + + // 5121e has two dr usb modules + // mpc5121_ads only uses USB0 + + // USB1 using external ULPI PHY + //usb@3000 { + // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + // reg = <0x3000 0x1000>; + // #address-cells = <1>; + // #size-cells = <0>; + // interrupt-parent = < &ipic >; + // interrupts = <43 0x8>; + // dr_mode = "otg"; + // phy_type = "ulpi"; + // port1; + //}; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + reg = <0x4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + port0; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + pata@10200 { + compatible = "fsl,mpc5121-pata"; + reg = <0x10200 0x100>; + interrupts = <5 0x8>; + interrupt-parent = < &ipic >; + }; + + // 512x PSCs are not 52xx PSC compatible // PSC3 serial port A aka ttyPSC0 serial@11300 { device_type = "serial"; - compatible = "fsl,mpc5121-psc-uart"; + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; // Logical port assignment needed until driver // learns to use aliases port-number = <0>; cell-index = <3>; reg = <0x11300 0x100>; - interrupts = <0x28 0x8>; // actually the fifo irq + interrupts = <40 0x8>; interrupt-parent = < &ipic >; + rx-fifo-size = <16>; + tx-fifo-size = <16>; }; // PSC4 serial port B aka ttyPSC1 serial@11400 { device_type = "serial"; - compatible = "fsl,mpc5121-psc-uart"; + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; // Logical port assignment needed until driver // learns to use aliases port-number = <1>; cell-index = <4>; reg = <0x11400 0x100>; - interrupts = <0x28 0x8>; // actually the fifo irq + interrupts = <40 0x8>; interrupt-parent = < &ipic >; + rx-fifo-size = <16>; + tx-fifo-size = <16>; }; - pscsfifo@11f00 { + // PSC5 in ac97 mode + ac97@11500 { + compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; + cell-index = <5>; + reg = <0x11500 0x100>; + interrupts = <40 0x8>; + interrupt-parent = < &ipic >; + fsl,mode = "ac97-slave"; + rx-fifo-size = <384>; + tx-fifo-size = <384>; + }; + + pscfifo@11f00 { compatible = "fsl,mpc5121-psc-fifo"; reg = <0x11f00 0x100>; - interrupts = <0x28 0x8>; + interrupts = <40 0x8>; interrupt-parent = < &ipic >; }; + + dma@14000 { + compatible = "fsl,mpc5121-dma2"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci: pci@80008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x15 - Slot 1 PCI + 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 + 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 + 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 + 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 + + // IDSEL 0x16 - Slot 2 MiniPCI + 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 + 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 + + // IDSEL 0x17 - Slot 3 MiniPCI + 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 + 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 + >; + interrupt-parent = < &ipic >; + interrupts = <1 0x8>; + bus-range = <0 0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x80008500 0x100>; + compatible = "fsl,mpc5121-pci"; + device_type = "pci"; }; }; -- 2.39.5