From 4f07c9ccdf92155dd8a216eee262f2954a6d69a2 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 1 Mar 2014 16:17:03 +0100 Subject: [PATCH] ASoC: neo1973_wm8753: Convert to table based setup Use table based setup to register the controls and DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/samsung/neo1973_wm8753.c | 60 ++++++++++++------------------ 1 file changed, 24 insertions(+), 36 deletions(-) diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c index 0125d9d5fbe7..b0800337b79e 100644 --- a/sound/soc/samsung/neo1973_wm8753.c +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -272,48 +272,29 @@ static const struct snd_kcontrol_new neo1973_wm8753_controls[] = { static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - int ret; + struct snd_soc_card *card = rtd->card; /* set up NC codec pins */ - snd_soc_dapm_nc_pin(dapm, "OUT3"); - snd_soc_dapm_nc_pin(dapm, "OUT4"); - snd_soc_dapm_nc_pin(dapm, "LINE1"); - snd_soc_dapm_nc_pin(dapm, "LINE2"); - - /* Add neo1973 specific widgets */ - ret = snd_soc_dapm_new_controls(dapm, neo1973_wm8753_dapm_widgets, - ARRAY_SIZE(neo1973_wm8753_dapm_widgets)); - if (ret) - return ret; - - /* add neo1973 specific controls */ - ret = snd_soc_add_card_controls(rtd->card, neo1973_wm8753_controls, - ARRAY_SIZE(neo1973_wm8753_controls)); - if (ret) - return ret; - - /* set up neo1973 specific audio routes */ - ret = snd_soc_dapm_add_routes(dapm, neo1973_wm8753_routes, - ARRAY_SIZE(neo1973_wm8753_routes)); - if (ret) - return ret; + snd_soc_dapm_nc_pin(&codec->dapm, "OUT3"); + snd_soc_dapm_nc_pin(&codec->dapm, "OUT4"); + snd_soc_dapm_nc_pin(&codec->dapm, "LINE1"); + snd_soc_dapm_nc_pin(&codec->dapm, "LINE2"); /* set endpoints to default off mode */ - snd_soc_dapm_disable_pin(dapm, "GSM Line Out"); - snd_soc_dapm_disable_pin(dapm, "GSM Line In"); - snd_soc_dapm_disable_pin(dapm, "Headset Mic"); - snd_soc_dapm_disable_pin(dapm, "Handset Mic"); - snd_soc_dapm_disable_pin(dapm, "Stereo Out"); - snd_soc_dapm_disable_pin(dapm, "Handset Spk"); + snd_soc_dapm_disable_pin(&card->dapm, "GSM Line Out"); + snd_soc_dapm_disable_pin(&card->dapm, "GSM Line In"); + snd_soc_dapm_disable_pin(&card->dapm, "Headset Mic"); + snd_soc_dapm_disable_pin(&card->dapm, "Handset Mic"); + snd_soc_dapm_disable_pin(&card->dapm, "Stereo Out"); + snd_soc_dapm_disable_pin(&card->dapm, "Handset Spk"); /* allow audio paths from the GSM modem to run during suspend */ - snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out"); - snd_soc_dapm_ignore_suspend(dapm, "GSM Line In"); - snd_soc_dapm_ignore_suspend(dapm, "Headset Mic"); - snd_soc_dapm_ignore_suspend(dapm, "Handset Mic"); - snd_soc_dapm_ignore_suspend(dapm, "Stereo Out"); - snd_soc_dapm_ignore_suspend(dapm, "Handset Spk"); + snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line Out"); + snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line In"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Mic"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Stereo Out"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Spk"); return 0; } @@ -367,6 +348,13 @@ static struct snd_soc_card neo1973 = { .num_aux_devs = ARRAY_SIZE(neo1973_aux_devs), .codec_conf = neo1973_codec_conf, .num_configs = ARRAY_SIZE(neo1973_codec_conf), + + .controls = neo1973_wm8753_controls, + .num_controls = ARRAY_SIZE(neo1973_wm8753_controls), + .dapm_widgets = neo1973_wm8753_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(neo1973_wm8753_dapm_widgets), + .dapm_routes = neo1973_wm8753_routes, + .num_dapm_routes = ARRAY_SIZE(neo1973_wm8753_routes), }; static struct platform_device *neo1973_snd_device; -- 2.39.5