From 4f08187d8cc97ada0992f855ad8d98c75bd7bb8d Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 16 May 2017 01:28:33 +0200 Subject: [PATCH] arm64: dts: marvell: add second 1G port on the Armada 8040 DB Armada 8040 DB is equipped with 4 (2x 10G SFI + 2x 1G RGMII) ethernet ports of which only one was hitherto enabled. Because currently mvpp2 driver is capable of supporting only 1G RGMII/SGMII, enable second port from CP slave HW block. Signed-off-by: Marcin Wojtas Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index dc0d084005b2..3cde649f96e4 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -169,6 +169,22 @@ status = "okay"; }; +&cps_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cps_ethernet { + status = "okay"; +}; + +&cps_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + &ap_sdhci0 { status = "okay"; bus-width = <4>; -- 2.39.5