From 4f10c09d837b19223dc54b645a6c40d5ad338251 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 9 Feb 2012 17:38:59 +0800 Subject: [PATCH] ENGR00174128-1 Revert "Remove the discharge for VBUS and DP-1" As dp/dm is floating with no usb cable and switch host mode to device mode situation, it do needs this discharge dp patch But, discharge vbus doesn't be needed at suspend_irq, so keep it removing. This reverts commit 0924b71278650fa3891a8f6ea70f91242ca6e5fd. Signed-off-by: Peter Chen --- drivers/usb/gadget/arcotg_udc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/arcotg_udc.c b/drivers/usb/gadget/arcotg_udc.c index 55fc066e636d..fc49aaa15c44 100755 --- a/drivers/usb/gadget/arcotg_udc.c +++ b/drivers/usb/gadget/arcotg_udc.c @@ -2026,6 +2026,7 @@ static void suspend_irq(struct fsl_udc *udc) udc->resume_state = udc->usb_state; udc->usb_state = USB_STATE_SUSPENDED; + /* report suspend to the driver, serial.c does not support this */ if (udc->driver->suspend) udc->driver->suspend(&udc->gadget); @@ -2147,6 +2148,10 @@ static void fsl_gadget_disconnect_event(struct work_struct *work) u32 tmp; pdata = udc->pdata; + + /* enable pulldown dp */ + if (pdata->gadget_discharge_dp) + pdata->gadget_discharge_dp(true); /* * Some boards are very slow change line state from J to SE0 for DP, * So, we need to discharge DP, otherwise there is a wakeup interrupt @@ -2154,6 +2159,10 @@ static void fsl_gadget_disconnect_event(struct work_struct *work) */ gadget_wait_line_to_se0(); + /* Disable pulldown dp */ + if (pdata->gadget_discharge_dp) + pdata->gadget_discharge_dp(false); + /* * Wait class drivers finish, an well-behaviour class driver should * call ep_disable when it is notified to be disconnected. @@ -2211,7 +2220,6 @@ bool try_wake_up_udc(struct fsl_udc *udc) fsl_writel(tmp | USB_CMD_RUN_STOP, &dr_regs->usbcmd); printk(KERN_DEBUG "%s: udc out low power mode\n", __func__); } else { - printk(KERN_INFO "USB device disconnected\n"); fsl_writel(tmp & ~USB_CMD_RUN_STOP, &dr_regs->usbcmd); /* here we need disable B_SESSION_IRQ, after * schedule_work finished, it need to be enabled again. -- 2.39.5