From 4f41525b4d225d78228f8bb74bb922994bf65d35 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 17 Feb 2016 15:40:58 -0800 Subject: [PATCH] ARM: dts: vf-colibri: remove regulator container node Drop the fake simple-bus container 'regulators' and put the regulators directly under the root node. This also makes the artificial 'reg' properties superfluous. While at it, remove the unnecessary regulator-always-on property and name the regulators according to schematics. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 42 +++++++++-------------- 1 file changed, 16 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index b49467372643..291e9395d6d0 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -50,32 +50,22 @@ clock-frequency = <16000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - sys_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@1 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_reg>; - reg = <1>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */ + vin-supply = <®_5v0>; }; }; @@ -145,7 +135,7 @@ }; &usbh1 { - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; &iomuxc { -- 2.39.5