From 4f5e01e96d424b54f5f0e89ee1ba9ccca03a3941 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 1 Sep 2014 19:35:41 +0200 Subject: [PATCH] ARM: Kirkwood: Fix DT based DSA. During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: Andrew Lunn Cc: seugene@marvell.com Tested-by: Eugene Sanivsky Fixes: e2eaa339af44: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f3808be8: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 4 +- .../arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 16 +++---- arch/arm/boot/dts/kirkwood-rd88f6281-a.dts | 43 +++++++++++++++++++ arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts | 26 ----------- ...f6281-a1.dts => kirkwood-rd88f6281-z0.dts} | 18 +++++--- arch/arm/boot/dts/kirkwood-rd88f6281.dtsi | 27 +++--------- arch/arm/boot/dts/kirkwood.dtsi | 4 +- 7 files changed, 69 insertions(+), 69 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-rd88f6281-a.dts delete mode 100644 arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts rename arch/arm/boot/dts/{kirkwood-rd88f6281-a1.dts => kirkwood-rd88f6281-z0.dts} (57%) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b8c5cd3ddeb9..e6aa6e77a3ec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -144,8 +144,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ kirkwood-rd88f6192.dtb \ - kirkwood-rd88f6281-a0.dtb \ - kirkwood-rd88f6281-a1.dtb \ + kirkwood-rd88f6281-z0.dtb \ + kirkwood-rd88f6281-a.dtb \ kirkwood-rs212.dtb \ kirkwood-rs409.dtb \ kirkwood-rs411.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 8f76d28759a3..f82827d6fcff 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -123,11 +123,11 @@ dsa@0 { compatible = "marvell,dsa"; - #address-cells = <2>; + #address-cells = <1>; #size-cells = <0>; - dsa,ethernet = <ð0>; - dsa,mii-bus = <ðphy0>; + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; switch@0 { #address-cells = <1>; @@ -169,17 +169,13 @@ &mdio { status = "okay"; - - ethphy0: ethernet-phy@ff { - reg = <0xff>; /* No phy attached */ - speed = <1000>; - duplex = <1>; - }; }; ð0 { status = "okay"; + ethernet0-port@0 { - phy-handle = <ðphy0>; + speed = <1000>; + duplex = <1>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts new file mode 100644 index 000000000000..f2e08b3b33ea --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -0,0 +1,43 @@ +/* + * Marvell RD88F6181 A Board descrition + * + * Andrew Lunn + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions for the board with the A0 or + * higher stepping of the SoC. The ethernet switch does not have a + * "wan" port. + */ + +/dts-v1/; +#include "kirkwood-rd88f6281.dtsi" + +/ { + model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; + compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; + + dsa@0 { + switch@0 { + reg = <10 0>; /* MDIO address 10, switch 0 in tree */ + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@11 { + reg = <11>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts deleted file mode 100644 index a803bbb70bc8..000000000000 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Marvell RD88F6181 A0 Board descrition - * - * Andrew Lunn - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * This file contains the definitions for the board with the A0 variant of - * the SoC. The ethernet switch does not have a "wan" port. - */ - -/dts-v1/; -#include "kirkwood-rd88f6281.dtsi" - -/ { - model = "Marvell RD88f6281 Reference design, with A0 SoC"; - compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - - dsa@0 { - switch@0 { - reg = <10 0>; /* MDIO address 10, switch 0 in tree */ - }; - }; -}; \ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts similarity index 57% rename from arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts rename to arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index baeebbf1d8c7..f4272b64ed7f 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -1,5 +1,5 @@ /* - * Marvell RD88F6181 A1 Board descrition + * Marvell RD88F6181 Z0 stepping descrition * * Andrew Lunn * @@ -7,17 +7,17 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * - * This file contains the definitions for the board with the A1 variant of - * the SoC. The ethernet switch has a "wan" port. - */ + * This file contains the definitions for the board using the Z0 + * stepping of the SoC. The ethernet switch has a "wan" port. +*/ /dts-v1/; #include "kirkwood-rd88f6281.dtsi" / { - model = "Marvell RD88f6281 Reference design, with A1 SoC"; - compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; + model = "Marvell RD88f6281 Reference design, with Z0 SoC"; + compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; dsa@0 { switch@0 { @@ -28,4 +28,8 @@ }; }; }; -}; \ No newline at end of file +}; + +ð1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index 26cf0e0ccefd..d195e884b3b5 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -37,7 +37,6 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { - pinctrl-0 = <&pmx_sdio_cd>; pinctrl-names = "default"; pmx_sdio_cd: pmx-sdio-cd { @@ -69,8 +68,8 @@ #address-cells = <2>; #size-cells = <0>; - dsa,ethernet = <ð0>; - dsa,mii-bus = <ðphy1>; + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; switch@0 { #address-cells = <1>; @@ -119,35 +118,19 @@ }; partition@300000 { - label = "data"; + label = "rootfs"; reg = <0x0300000 0x500000>; }; }; &mdio { status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@ff { - reg = <0xff>; /* No PHY attached */ - speed = <1000>; - duple = <1>; - }; }; ð0 { status = "okay"; ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; + speed = <1000>; + duplex = <1>; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index afc640cd80c5..464f09a1a4a5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -309,7 +309,7 @@ marvell,tx-checksum-limit = <1600>; status = "disabled"; - ethernet0-port@0 { + eth0port: ethernet0-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <11>; @@ -342,7 +342,7 @@ pinctrl-names = "default"; status = "disabled"; - ethernet1-port@0 { + eth1port: ethernet1-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <15>; -- 2.39.5