From 5065a706c1784f2dd661cd43c1ac2b4ae92d0afa Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 30 Nov 2013 21:38:43 +0900 Subject: [PATCH] treewide: Fix typo in Kconfig Correct spelling typo in Kconfig. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- arch/arm/mach-at91/Kconfig.non_dt | 2 +- arch/x86/Kconfig | 2 +- drivers/isdn/mISDN/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/xen/Kconfig | 2 +- net/netfilter/ipset/Kconfig | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index ca900be144ce..0363dba7d3f6 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -241,7 +241,7 @@ config MACH_PCONTROL_G20 bool "PControl G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation + carrier board, being the decentralized unit of a building automation system; featuring nvram, eth-switch, iso-rs485, display, io config MACH_GSIA18S diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5c0ed72c02a2..96c52bb23feb 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -948,7 +948,7 @@ config X86_ANCIENT_MCE depends on X86_32 && X86_MCE ---help--- Include support for machine check handling on old Pentium 5 or WinChip - systems. These typically need to be enabled explicitely on the command + systems. These typically need to be enabled explicitly on the command line. config X86_MCE_THRESHOLD diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig index 1747a02a019a..c0730d5c734d 100644 --- a/drivers/isdn/mISDN/Kconfig +++ b/drivers/isdn/mISDN/Kconfig @@ -17,7 +17,7 @@ config MISDN_DSP This module may be used for special applications that require cross connecting of bchannels, conferencing, dtmf decoding, - echo cancelation, tone generation, and Blowfish encryption and + echo cancellation, tone generation, and Blowfish encryption and decryption. It may use hardware features if available. E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index fe25677a5511..a2d61d061be7 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -204,9 +204,9 @@ config SCSI_MULTI_LUN Some devices support more than one LUN (Logical Unit Number) in order to allow access to several media, e.g. CD jukebox, USB card reader, mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overriden by + probe for all LUNs by default. This setting can be overridden by max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitely report + devices conforming to SCSI-3 or higher as they can explicitly report their number of LUNs. It is safe to say Y here unless you have one of those rare devices which reacts in an unexpected way when probed for multiple LUNs. diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 23eae5cb69c2..e8dc72c4bf11 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -223,7 +223,7 @@ config XEN_ACPI_PROCESSOR To do that the driver parses the Power Management data and uploads said information to the Xen hypervisor. Then the Xen hypervisor can - select the proper Cx and Pxx states. It also registers itslef as the + select the proper Cx and Pxx states. It also registers itself as the SMM so that other drivers (such as ACPI cpufreq scaling driver) will not load. diff --git a/net/netfilter/ipset/Kconfig b/net/netfilter/ipset/Kconfig index ba36c283d837..95e7d62f3008 100644 --- a/net/netfilter/ipset/Kconfig +++ b/net/netfilter/ipset/Kconfig @@ -21,7 +21,7 @@ config IP_SET_MAX You can define here default value of the maximum number of IP sets for the kernel. - The value can be overriden by the 'max_sets' module + The value can be overridden by the 'max_sets' module parameter of the 'ip_set' module. config IP_SET_BITMAP_IP -- 2.39.5