From 51ab3fb848347f7722381b18fcf7ff6838d98f64 Mon Sep 17 00:00:00 2001 From: Ryan Press Date: Thu, 28 Mar 2013 19:10:24 -0700 Subject: [PATCH] arm: mvebu: Add GPIO LEDs to Mirabox board Add the three external LED definitions to the device tree file on the Mirabox. The Mirabox user guide calls out one as a power LED, and the other two are defined for WiFi, but as the current mwifiex drivers don't have LED support, we make them status LEDs. These have been tested working by writing to the appropriate /sys/class/leds trigger. Signed-off-by: Ryan Press Tested-by: Neil Greatorex Tested-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-mirabox.dts | 37 ++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 193ae1467816..8cfae34e3e02 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -33,6 +33,43 @@ clock-frequency = <600000000>; status = "okay"; }; + + pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_pin &stat_led_pins>; + + green_pwr_led { + label = "mirabox:green:pwr"; + gpios = <&gpio1 31 1>; + linux,default-trigger = "heartbeat"; + }; + + blue_stat_led { + label = "mirabox:blue:stat"; + gpios = <&gpio2 0 1>; + linux,default-trigger = "cpu0"; + }; + + green_stat_led { + label = "mirabox:green:stat"; + gpios = <&gpio2 1 1>; + default-state = "off"; + }; + }; + mdio { phy0: ethernet-phy@0 { reg = <0>; -- 2.39.5