From 5262d8fdd9cdc8ef3ad8e1af8968f079dd81dde5 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 13 Jan 2014 21:28:00 +0000 Subject: [PATCH] staging:iio:accel:sca3000: Fix format of comments Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/staging/iio/accel/sca3000_core.c | 52 +++++++++++++----------- 1 file changed, 29 insertions(+), 23 deletions(-) diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index 908d5cde9b91..b627d8f6085d 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -32,7 +32,8 @@ enum sca3000_variant { e05, }; -/* Note where option modes are not defined, the chip simply does not +/* + * Note where option modes are not defined, the chip simply does not * support any. * Other chips in the sca3000 series use i2c and are not included here. * @@ -191,7 +192,6 @@ error_ret: return ret; } -/* Crucial that lock is called before calling this */ /** * sca3000_read_ctrl_reg() read from lock protected control register. * @@ -402,7 +402,8 @@ error_ret: } -/* Not even vaguely standard attributes so defined here rather than +/* + * Not even vaguely standard attributes so defined here rather than * in the relevant IIO core headers */ static IIO_DEVICE_ATTR(measurement_mode_available, S_IRUGO, @@ -662,7 +663,8 @@ error_free_lock: return ret ? ret : len; } -/* Should only really be registered if ring buffer support is compiled in. +/* + * Should only really be registered if ring buffer support is compiled in. * Does no harm however and doing it right would add a fair bit of complexity */ static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq); @@ -675,10 +677,10 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, /** * sca3000_read_temp() sysfs interface to get the temperature when available * -* The alignment of data in here is downright odd. See data sheet. -* Converting this into a meaningful value is left to inline functions in -* userspace part of header. -**/ + * The alignment of data in here is downright odd. See data sheet. + * Converting this into a meaningful value is left to inline functions in + * userspace part of header. + **/ static ssize_t sca3000_read_temp(struct device *dev, struct device_attribute *attr, char *buf) @@ -802,12 +804,12 @@ static const struct attribute_group sca3000_attribute_group_with_temp = { .attrs = sca3000_attributes_with_temp, }; -/* RING RELATED interrupt handler */ -/* depending on event, push to the ring buffer event chrdev or the event one */ - /** * sca3000_event_handler() - handling ring and non ring events * + * Ring related interrupt handler. Depending on event, push to + * the ring buffer event chrdev or the event one. + * * This function is complicated by the fact that the devices can signify ring * and non ring events via the same interrupt line and they can only * be distinguished via a read of the relevant status register. @@ -819,7 +821,8 @@ static irqreturn_t sca3000_event_handler(int irq, void *private) int ret, val; s64 last_timestamp = iio_get_time_ns(); - /* Could lead if badly timed to an extra read of status reg, + /* + * Could lead if badly timed to an extra read of status reg, * but ensures no interrupt is missed. */ mutex_lock(&st->lock); @@ -934,7 +937,6 @@ static ssize_t sca3000_query_free_fall_mode(struct device *dev, * the device falls more than 25cm. This has not been tested due * to fragile wiring. **/ - static ssize_t sca3000_set_free_fall_mode(struct device *dev, struct device_attribute *attr, const char *buf, @@ -956,7 +958,7 @@ static ssize_t sca3000_set_free_fall_mode(struct device *dev, if (ret) goto error_ret; - /*if off and should be on*/ + /* if off and should be on */ if (val && !(st->rx[0] & protect_mask)) ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, (st->rx[0] | SCA3000_FREE_FALL_DETECT)); @@ -991,13 +993,15 @@ static int sca3000_write_event_config(struct iio_dev *indio_dev, int num = chan->channel2; mutex_lock(&st->lock); - /* First read the motion detector config to find out if - * this axis is on*/ + /* + * First read the motion detector config to find out if + * this axis is on + */ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL); if (ret < 0) goto exit_point; ctrlval = ret; - /* Off and should be on */ + /* if off and should be on */ if (state && !(ctrlval & sca3000_addresses[num][2])) { ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL, @@ -1020,7 +1024,7 @@ static int sca3000_write_event_config(struct iio_dev *indio_dev, ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); if (ret) goto exit_point; - /*if off and should be on*/ + /* if off and should be on */ if ((st->mo_det_use_count) && ((st->rx[0] & protect_mask) != SCA3000_MEAS_MODE_MOT_DET)) ret = sca3000_write_reg(st, SCA3000_REG_ADDR_MODE, @@ -1066,7 +1070,7 @@ static struct attribute_group sca3000_event_attribute_group = { * Devices use flash memory to store many of the register values * and hence can come up in somewhat unpredictable states. * Hence reset everything on driver load. - **/ + **/ static int sca3000_clean_setup(struct sca3000_state *st) { int ret; @@ -1106,9 +1110,11 @@ static int sca3000_clean_setup(struct sca3000_state *st) | SCA3000_INT_MASK_ACTIVE_LOW); if (ret) goto error_ret; - /* Select normal measurement mode, free fall off, ring off */ - /* Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5 - * as that occurs in one of the example on the datasheet */ + /* + * Select normal measurement mode, free fall off, ring off + * Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5 + * as that occurs in one of the example on the datasheet + */ ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_MODE, 1); if (ret) goto error_ret; @@ -1235,7 +1241,7 @@ static int sca3000_remove(struct spi_device *spi) struct iio_dev *indio_dev = spi_get_drvdata(spi); struct sca3000_state *st = iio_priv(indio_dev); - /* Must ensure no interrupts can be generated after this!*/ + /* Must ensure no interrupts can be generated after this! */ sca3000_stop_all_interrupts(st); if (spi->irq) free_irq(spi->irq, indio_dev); -- 2.39.5