From 527a626601de6ff89859de90883cc546892bf3ca Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 May 2011 20:18:55 -0700 Subject: [PATCH] skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/ and make the necessary Kconfig and Makefile changes. CC: Sachin Sanap CC: Zhangfei Gao CC: Philip Rakity CC: Mark Brown CC: Lennert Buytenhek CC: Stephen Hemminger Signed-off-by: Jeff Kirsher --- MAINTAINERS | 5 +- drivers/net/Kconfig | 90 -------------- drivers/net/Makefile | 4 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/marvell/Kconfig | 110 ++++++++++++++++++ drivers/net/ethernet/marvell/Makefile | 8 ++ .../net/{ => ethernet/marvell}/mv643xx_eth.c | 0 .../net/{ => ethernet/marvell}/pxa168_eth.c | 0 drivers/net/{ => ethernet/marvell}/skge.c | 0 drivers/net/{ => ethernet/marvell}/skge.h | 0 drivers/net/{ => ethernet/marvell}/sky2.c | 0 drivers/net/{ => ethernet/marvell}/sky2.h | 0 13 files changed, 122 insertions(+), 97 deletions(-) create mode 100644 drivers/net/ethernet/marvell/Kconfig create mode 100644 drivers/net/ethernet/marvell/Makefile rename drivers/net/{ => ethernet/marvell}/mv643xx_eth.c (100%) rename drivers/net/{ => ethernet/marvell}/pxa168_eth.c (100%) rename drivers/net/{ => ethernet/marvell}/skge.c (100%) rename drivers/net/{ => ethernet/marvell}/skge.h (100%) rename drivers/net/{ => ethernet/marvell}/sky2.c (100%) rename drivers/net/{ => ethernet/marvell}/sky2.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index e986e3e1d2a..b9acfdee10e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4122,7 +4122,7 @@ MARVELL MV643XX ETHERNET DRIVER M: Lennert Buytenhek L: netdev@vger.kernel.org S: Maintained -F: drivers/net/mv643xx_eth.* +F: drivers/net/ethernet/marvell/mv643xx_eth.* F: include/linux/mv643xx.h MARVELL MWIFIEX WIRELESS DRIVER @@ -5854,8 +5854,7 @@ SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained -F: drivers/net/skge.* -F: drivers/net/sky2.* +F: drivers/net/ethernet/marvell/sk* SLAB ALLOCATOR M: Christoph Lameter diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 87e7a121785..cb6c6947b32 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -313,16 +313,6 @@ config BFIN_MAC_USE_HWSTAMP help To support the IEEE 1588 Precision Time Protocol (PTP), select y here -config PXA168_ETH - tristate "Marvell pxa168 ethernet support" - depends on CPU_PXA168 - select PHYLIB - help - This driver supports the pxa168 Ethernet ports. - - To compile this driver as a module, choose M here. The module - will be called pxa168_eth. - config NET_NETX tristate "NetX Ethernet support" select MII @@ -803,73 +793,6 @@ config SIS190 To compile this driver as a module, choose M here: the module will be called sis190. This is recommended. -config SKGE - tristate "Marvell Yukon Gigabit Ethernet support" - depends on PCI - select CRC32 - ---help--- - This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx - and related Gigabit Ethernet adapters. It is a new smaller driver - with better performance and more complete ethtool support. - - It does not support the link failover and network management - features that "portable" vendor supplied sk98lin driver does. - - This driver supports adapters based on the original Yukon chipset: - Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, - Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. - - It does not support the newer Yukon2 chipset: a separate driver, - sky2, is provided for these adapters. - - To compile this driver as a module, choose M here: the module - will be called skge. This is recommended. - -config SKGE_DEBUG - bool "Debugging interface" - depends on SKGE && DEBUG_FS - help - This option adds the ability to dump driver state for debugging. - The file /sys/kernel/debug/skge/ethX displays the state of the internal - transmit and receive rings. - - If unsure, say N. - -config SKGE_GENESIS - bool "Support for older SysKonnect Genesis boards" - depends on SKGE - help - This enables support for the older and uncommon SysKonnect Genesis - chips, which support MII via an external transceiver, instead of - an internal one. Disabling this option will save some memory - by making code smaller. If unsure say Y. - -config SKY2 - tristate "Marvell Yukon 2 support" - depends on PCI - select CRC32 - ---help--- - This driver supports Gigabit Ethernet adapters based on the - Marvell Yukon 2 chipset: - Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ - 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 - - There is companion driver for the older Marvell Yukon and - SysKonnect Genesis based adapters: skge. - - To compile this driver as a module, choose M here: the module - will be called sky2. This is recommended. - -config SKY2_DEBUG - bool "Debugging interface" - depends on SKY2 && DEBUG_FS - help - This option adds the ability to dump driver state for debugging. - The file /sys/kernel/debug/sky2/ethX displays the state of the internal - transmit and receive rings. - - If unsure, say N. - config VIA_VELOCITY tristate "VIA Velocity support" depends on PCI @@ -952,19 +875,6 @@ config UGETH_TX_ON_DEMAND bool "Transmit on Demand support" depends on UCC_GETH -config MV643XX_ETH - tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on (MV64X60 || PPC32 || PLAT_ORION) && INET - select INET_LRO - select PHYLIB - help - This driver supports the gigabit ethernet MACs in the - Marvell Discovery PPC/MIPS chipset family (MV643XX) and - in the Marvell Orion ARM SoC family. - - Some boards that use the Discovery chipset are the Momenco - Ocelot C and Jaguar ATX and Pegasos II. - config XILINX_LL_TEMAC tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" depends on PPC || MICROBLAZE diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 141ed251f52..69ca6a009c5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -46,8 +46,6 @@ obj-$(CONFIG_GELIC_NET) += ps3_gelic.o gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y) obj-$(CONFIG_TC35815) += tc35815.o -obj-$(CONFIG_SKGE) += skge.o -obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o @@ -75,7 +73,6 @@ endif obj-$(CONFIG_FORCEDETH) += forcedeth.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o -obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o ll_temac-objs := ll_temac_main.o ll_temac_mdio.o obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o @@ -111,7 +108,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o -obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_ENC28J60) += enc28j60.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 0eaf95770ab..1c447d96d7e 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -28,6 +28,7 @@ source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/xscale/Kconfig" +source "drivers/net/ethernet/marvell/Kconfig" source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/myricom/Kconfig" source "drivers/net/ethernet/natsemi/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index b5ca872f244..48c8656b96c 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/ +obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/ diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig new file mode 100644 index 00000000000..e525408367b --- /dev/null +++ b/drivers/net/ethernet/marvell/Kconfig @@ -0,0 +1,110 @@ +# +# Marvell device configuration +# + +config NET_VENDOR_MARVELL + bool "Marvell devices" + depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Marvell devices. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_MARVELL + +config MV643XX_ETH + tristate "Marvell Discovery (643XX) and Orion ethernet support" + depends on (MV64X60 || PPC32 || PLAT_ORION) && INET + select INET_LRO + select PHYLIB + ---help--- + This driver supports the gigabit ethernet MACs in the + Marvell Discovery PPC/MIPS chipset family (MV643XX) and + in the Marvell Orion ARM SoC family. + + Some boards that use the Discovery chipset are the Momenco + Ocelot C and Jaguar ATX and Pegasos II. + +config PXA168_ETH + tristate "Marvell pxa168 ethernet support" + depends on CPU_PXA168 + select PHYLIB + ---help--- + This driver supports the pxa168 Ethernet ports. + + To compile this driver as a module, choose M here. The module + will be called pxa168_eth. + +config SKGE + tristate "Marvell Yukon Gigabit Ethernet support" + depends on PCI + select CRC32 + ---help--- + This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx + and related Gigabit Ethernet adapters. It is a new smaller driver + with better performance and more complete ethtool support. + + It does not support the link failover and network management + features that "portable" vendor supplied sk98lin driver does. + + This driver supports adapters based on the original Yukon chipset: + Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, + Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. + + It does not support the newer Yukon2 chipset: a separate driver, + sky2, is provided for these adapters. + + To compile this driver as a module, choose M here: the module + will be called skge. This is recommended. + +config SKGE_DEBUG + bool "Debugging interface" + depends on SKGE && DEBUG_FS + ---help--- + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/skge/ethX displays the state of the internal + transmit and receive rings. + + If unsure, say N. + +config SKGE_GENESIS + bool "Support for older SysKonnect Genesis boards" + depends on SKGE + ---help--- + This enables support for the older and uncommon SysKonnect Genesis + chips, which support MII via an external transceiver, instead of + an internal one. Disabling this option will save some memory + by making code smaller. If unsure say Y. + +config SKY2 + tristate "Marvell Yukon 2 support" + depends on PCI + select CRC32 + ---help--- + This driver supports Gigabit Ethernet adapters based on the + Marvell Yukon 2 chipset: + Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ + 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 + + There is companion driver for the older Marvell Yukon and + SysKonnect Genesis based adapters: skge. + + To compile this driver as a module, choose M here: the module + will be called sky2. This is recommended. + +config SKY2_DEBUG + bool "Debugging interface" + depends on SKY2 && DEBUG_FS + ---help--- + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/sky2/ethX displays the state of the internal + transmit and receive rings. + + If unsure, say N. + +endif # NET_VENDOR_MARVELL diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile new file mode 100644 index 00000000000..57e3234a37b --- /dev/null +++ b/drivers/net/ethernet/marvell/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Marvell device drivers. +# + +obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o +obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o +obj-$(CONFIG_SKGE) += skge.o +obj-$(CONFIG_SKY2) += sky2.o diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c similarity index 100% rename from drivers/net/mv643xx_eth.c rename to drivers/net/ethernet/marvell/mv643xx_eth.c diff --git a/drivers/net/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c similarity index 100% rename from drivers/net/pxa168_eth.c rename to drivers/net/ethernet/marvell/pxa168_eth.c diff --git a/drivers/net/skge.c b/drivers/net/ethernet/marvell/skge.c similarity index 100% rename from drivers/net/skge.c rename to drivers/net/ethernet/marvell/skge.c diff --git a/drivers/net/skge.h b/drivers/net/ethernet/marvell/skge.h similarity index 100% rename from drivers/net/skge.h rename to drivers/net/ethernet/marvell/skge.h diff --git a/drivers/net/sky2.c b/drivers/net/ethernet/marvell/sky2.c similarity index 100% rename from drivers/net/sky2.c rename to drivers/net/ethernet/marvell/sky2.c diff --git a/drivers/net/sky2.h b/drivers/net/ethernet/marvell/sky2.h similarity index 100% rename from drivers/net/sky2.h rename to drivers/net/ethernet/marvell/sky2.h -- 2.39.5