From 53b36426d0505f26a28e12c2582e9d35c48864e4 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 10 Jan 2017 22:55:19 +0100 Subject: [PATCH] Documentation: dt: iio: add st_lsm6dsx sensor device binding Acked-by: Rob Herring Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- .../bindings/iio/imu/st_lsm6dsx.txt | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt new file mode 100644 index 000000000000..ed3cdac00f13 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -0,0 +1,24 @@ +* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors + +Required properties: +- compatible: must be one of: + "st,lsm6ds3" + "st,lsm6dsm" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +lsm6dsm@6b { + compatible = "st,lsm6dsm"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; -- 2.39.5