From 53b6b34dfaa0263128d1e03bed0ba6fb40df88f8 Mon Sep 17 00:00:00 2001
From: Brett Rudley <brudley@broadcom.com>
Date: Tue, 26 Oct 2010 09:17:04 -0700
Subject: [PATCH] staging: brcm80211: Purge unused lines from
 bcmdefs.h/wlc_pub.h

Purge unused lines

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/brcm80211/include/bcmdefs.h | 56 +--------------------
 drivers/staging/brcm80211/sys/wlc_pub.h     |  4 +-
 2 files changed, 4 insertions(+), 56 deletions(-)

diff --git a/drivers/staging/brcm80211/include/bcmdefs.h b/drivers/staging/brcm80211/include/bcmdefs.h
index dc52e9dbb8b5..ae6a65a64714 100644
--- a/drivers/staging/brcm80211/include/bcmdefs.h
+++ b/drivers/staging/brcm80211/include/bcmdefs.h
@@ -42,9 +42,6 @@
 #define BCMFASTPATH
 #endif
 
-/* Put some library data/code into ROM to reduce RAM requirements */
-#define BCMROMFN(_fn)		_fn
-
 /* Bus types */
 #define	SI_BUS			0	/* SOC Interconnect */
 #define	PCI_BUS			1	/* PCI target */
@@ -54,35 +51,10 @@
 #define SPI_BUS			6	/* gSPI target */
 #define RPC_BUS			7	/* RPC target */
 
-/* Allows size optimization for single-bus image */
-#ifdef BCMBUSTYPE
-#define BUSTYPE(bus) 	(BCMBUSTYPE)
-#else
 #define BUSTYPE(bus) 	(bus)
-#endif
-
-/* Allows size optimization for single-backplane image */
-#ifdef BCMCHIPTYPE
-#define CHIPTYPE(bus) 	(BCMCHIPTYPE)
-#else
 #define CHIPTYPE(bus) 	(bus)
-#endif
-
-/* Allows size optimization for SPROM support */
-#define SPROMBUS	(PCI_BUS)
-
-/* Allows size optimization for single-chip image */
-#ifdef BCMCHIPID
-#define CHIPID(chip)	(BCMCHIPID)
-#else
 #define CHIPID(chip)	(chip)
-#endif
-
-#ifdef BCMCHIPREV
-#define CHIPREV(rev)	(BCMCHIPREV)
-#else
 #define CHIPREV(rev)	(rev)
-#endif
 
 /* Defines for DMA Address Width - Shared between OSL and HNDDMA */
 #define DMADDR_MASK_32 0x0	/* Address mask for 32-bits */
@@ -146,31 +118,11 @@ typedef struct {
 
 #define BCMEXTRAHDROOM 172
 
-/* Headroom required for dongle-to-host communication.  Packets allocated
- * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
- * leave this much room in front for low-level message headers which may
- * be needed to get across the dongle bus to the host.  (These messages
- * don't go over the network, so room for the full WL header above would
- * be a waste.).
-*/
-#define BCMDONGLEHDRSZ 12
-#define BCMDONGLEPADSZ 16
-
-#define BCMDONGLEOVERHEAD	(BCMDONGLEHDRSZ + BCMDONGLEPADSZ)
-
 #ifdef BCMDBG
-
-#define BCMDBG_ERR
-
 #ifndef BCMDBG_ASSERT
 #define BCMDBG_ASSERT
-#endif				/* BCMDBG_ASSERT */
-
-#endif				/* BCMDBG */
-
-#if defined(BCMDBG_ASSERT)
-#define BCMASSERT_SUPPORT
-#endif
+#endif	/* BCMDBG_ASSERT */
+#endif	/* BCMDBG */
 
 /* Macros for doing definition and get/set of bitfields
  * Usage example, e.g. a three-bit field (bits 4-6):
@@ -190,10 +142,6 @@ typedef struct {
 		(((val) & (~(field ## _M << field ## _S))) | \
 		 ((unsigned)(bits) << field ## _S))
 
-/* define BCMSMALL to remove misc features for memory-constrained environments */
-#define	BCMSPACE
-#define bcmspace	true	/* if (bcmspace) code is retained */
-
 /* Max. nvram variable table size */
 #define	MAXSZ_NVRAM_VARS	4096
 
diff --git a/drivers/staging/brcm80211/sys/wlc_pub.h b/drivers/staging/brcm80211/sys/wlc_pub.h
index a6a8c33483c9..a392436c4d45 100644
--- a/drivers/staging/brcm80211/sys/wlc_pub.h
+++ b/drivers/staging/brcm80211/sys/wlc_pub.h
@@ -437,9 +437,9 @@ struct wlc_if;
 #define EDCF_ENAB(pub) (WME_ENAB(pub))
 #define QOS_ENAB(pub) (WME_ENAB(pub) || N_ENAB(pub))
 
-#define MONITOR_ENAB(wlc)	(bcmspace && (wlc)->monitor)
+#define MONITOR_ENAB(wlc)	((wlc)->monitor)
 
-#define PROMISC_ENAB(wlc)	(bcmspace && (wlc)->promisc)
+#define PROMISC_ENAB(wlc)	((wlc)->promisc)
 
 extern void wlc_pkttag_info_move(wlc_pub_t *pub, void *pkt_from, void *pkt_to);
 
-- 
2.39.2