From 543fd0a349dbb2f6ab896ec97cedbbd6fe4d1ee6 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Fri, 16 Sep 2011 00:20:48 +0100 Subject: [PATCH] staging: wlags49_h2: Reindent hcf.c Untabify with tab-width set to 4 (to match VI header). Then reindent with tab-width reset to 8. Signed-off-by: David Kilroy Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlags49_h2/hcf.c | 6084 +++++++++++++++--------------- 1 file changed, 3042 insertions(+), 3042 deletions(-) diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c index 85950d74f8f8..304258e20255 100644 --- a/drivers/staging/wlags49_h2/hcf.c +++ b/drivers/staging/wlags49_h2/hcf.c @@ -1,97 +1,96 @@ -// vim:tw=110:ts=4: /************************************************************************************************************ -* -* FILE : HCF.C -* -* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.10 $ -* Original: 2004/06/02 10:22:22 Revision: 1.85 Tag: hcf7_t20040602_01 -* Original: 2004/04/15 09:24:41 Revision: 1.63 Tag: hcf7_t7_20040415_01 -* Original: 2004/04/13 14:22:44 Revision: 1.62 Tag: t7_20040413_01 -* Original: 2004/04/01 15:32:55 Revision: 1.59 Tag: t7_20040401_01 -* Original: 2004/03/10 15:39:27 Revision: 1.55 Tag: t20040310_01 -* Original: 2004/03/04 11:03:37 Revision: 1.53 Tag: t20040304_01 -* Original: 2004/03/02 14:51:21 Revision: 1.50 Tag: t20040302_03 -* Original: 2004/02/24 13:00:27 Revision: 1.43 Tag: t20040224_01 -* Original: 2004/02/19 10:57:25 Revision: 1.39 Tag: t20040219_01 -* -* AUTHOR : Nico Valster -* -* SPECIFICATION: ........ -* -* DESCRIPTION : HCF Routines for Hermes-II (callable via the Wireless Connection I/F or WCI) -* Local Support Routines for above procedures -* -* Customizable via HCFCFG.H, which is included by HCF.H -* -************************************************************************************************************* -* -* -* SOFTWARE LICENSE -* -* This software is provided subject to the following terms and conditions, -* which you should read carefully before using the software. Using this -* software indicates your acceptance of these terms and conditions. If you do -* not agree with these terms and conditions, do not use the software. -* -* COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved -* COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved -* COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved -* All rights reserved. -* -* Redistribution and use in source or binary forms, with or without -* modifications, are permitted provided that the following conditions are met: -* -* . Redistributions of source code must retain the above copyright notice, this -* list of conditions and the following Disclaimer as comments in the code as -* well as in the documentation and/or other materials provided with the -* distribution. -* -* . Redistributions in binary form must reproduce the above copyright notice, -* this list of conditions and the following Disclaimer in the documentation -* and/or other materials provided with the distribution. -* -* . Neither the name of Agere Systems Inc. nor the names of the contributors -* may be used to endorse or promote products derived from this software -* without specific prior written permission. -* -* Disclaimer -* -* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, -* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY -* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN -* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT -* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -* DAMAGE. -* -* -************************************************************************************************************/ + * + * FILE : HCF.C + * + * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.10 $ + * Original: 2004/06/02 10:22:22 Revision: 1.85 Tag: hcf7_t20040602_01 + * Original: 2004/04/15 09:24:41 Revision: 1.63 Tag: hcf7_t7_20040415_01 + * Original: 2004/04/13 14:22:44 Revision: 1.62 Tag: t7_20040413_01 + * Original: 2004/04/01 15:32:55 Revision: 1.59 Tag: t7_20040401_01 + * Original: 2004/03/10 15:39:27 Revision: 1.55 Tag: t20040310_01 + * Original: 2004/03/04 11:03:37 Revision: 1.53 Tag: t20040304_01 + * Original: 2004/03/02 14:51:21 Revision: 1.50 Tag: t20040302_03 + * Original: 2004/02/24 13:00:27 Revision: 1.43 Tag: t20040224_01 + * Original: 2004/02/19 10:57:25 Revision: 1.39 Tag: t20040219_01 + * + * AUTHOR : Nico Valster + * + * SPECIFICATION: ........ + * + * DESCRIPTION : HCF Routines for Hermes-II (callable via the Wireless Connection I/F or WCI) + * Local Support Routines for above procedures + * + * Customizable via HCFCFG.H, which is included by HCF.H + * + ************************************************************************************************************* + * + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved + * COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved + * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * + ************************************************************************************************************/ /************************************************************************************************************ -** -** Implementation Notes -** -* - a leading marker of //! is used. The purpose of such a sequence is to help to understand the flow -* An example is: //!rc = HCF_SUCCESS; -* if this is superfluous because rc is already guaranteed to be 0 but it shows to the (maintenance) -* programmer it is an intentional omission at the place where someone could consider it most appropriate at -* first glance -* - using near pointers in a model where ss!=ds is an invitation for disaster, so be aware of how you specify -* your model and how you define variables which are used at interrupt time -* - remember that sign extension on 32 bit platforms may cause problems unless code is carefully constructed, -* e.g. use "(hcf_16)~foo" rather than "~foo" -* -************************************************************************************************************/ + ** + ** Implementation Notes + ** + * - a leading marker of //! is used. The purpose of such a sequence is to help to understand the flow + * An example is: //!rc = HCF_SUCCESS; + * if this is superfluous because rc is already guaranteed to be 0 but it shows to the (maintenance) + * programmer it is an intentional omission at the place where someone could consider it most appropriate at + * first glance + * - using near pointers in a model where ss!=ds is an invitation for disaster, so be aware of how you specify + * your model and how you define variables which are used at interrupt time + * - remember that sign extension on 32 bit platforms may cause problems unless code is carefully constructed, + * e.g. use "(hcf_16)~foo" rather than "~foo" + * + ************************************************************************************************************/ -#include "hcf.h" // HCF and MSF common include file -#include "hcfdef.h" // HCF specific include file -#include "mmd.h" // MoreModularDriver common include file +#include "hcf.h" // HCF and MSF common include file +#include "hcfdef.h" // HCF specific include file +#include "mmd.h" // MoreModularDriver common include file #include #if ! defined offsetof @@ -102,56 +101,56 @@ /***********************************************************************************************************/ /*************************************** PROTOTYPES ******************************************************/ /***********************************************************************************************************/ -HCF_STATIC int cmd_exe( IFBP ifbp, hcf_16 cmd_code, hcf_16 par_0 ); -HCF_STATIC int init( IFBP ifbp ); -HCF_STATIC int put_info( IFBP ifbp, LTVP ltvp ); +HCF_STATIC int cmd_exe( IFBP ifbp, hcf_16 cmd_code, hcf_16 par_0 ); +HCF_STATIC int init( IFBP ifbp ); +HCF_STATIC int put_info( IFBP ifbp, LTVP ltvp ); #if (HCF_EXT) & HCF_EXT_MB -HCF_STATIC int put_info_mb( IFBP ifbp, CFG_MB_INFO_STRCT FAR * ltvp ); +HCF_STATIC int put_info_mb( IFBP ifbp, CFG_MB_INFO_STRCT FAR * ltvp ); #endif // HCF_EXT_MB #if (HCF_TYPE) & HCF_TYPE_WPA -HCF_STATIC void calc_mic( hcf_32* p, hcf_32 M ); -void calc_mic_rx_frag( IFBP ifbp, wci_bufp p, int len ); -void calc_mic_tx_frag( IFBP ifbp, wci_bufp p, int len ); -HCF_STATIC int check_mic( IFBP ifbp ); +HCF_STATIC void calc_mic( hcf_32* p, hcf_32 M ); +void calc_mic_rx_frag( IFBP ifbp, wci_bufp p, int len ); +void calc_mic_tx_frag( IFBP ifbp, wci_bufp p, int len ); +HCF_STATIC int check_mic( IFBP ifbp ); #endif // HCF_TYPE_WPA -HCF_STATIC void calibrate( IFBP ifbp ); -HCF_STATIC int cmd_cmpl( IFBP ifbp ); -HCF_STATIC hcf_16 get_fid( IFBP ifbp ); -HCF_STATIC void isr_info( IFBP ifbp ); +HCF_STATIC void calibrate( IFBP ifbp ); +HCF_STATIC int cmd_cmpl( IFBP ifbp ); +HCF_STATIC hcf_16 get_fid( IFBP ifbp ); +HCF_STATIC void isr_info( IFBP ifbp ); #if HCF_DMA -HCF_STATIC DESC_STRCT* get_frame_lst(IFBP ifbp, int tx_rx_flag); +HCF_STATIC DESC_STRCT* get_frame_lst(IFBP ifbp, int tx_rx_flag); #endif // HCF_DMA -HCF_STATIC void get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ); //char*, byte count (usually even) +HCF_STATIC void get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ); //char*, byte count (usually even) #if HCF_DMA -HCF_STATIC void put_frame_lst( IFBP ifbp, DESC_STRCT *descp, int tx_rx_flag ); +HCF_STATIC void put_frame_lst( IFBP ifbp, DESC_STRCT *descp, int tx_rx_flag ); #endif // HCF_DMA -HCF_STATIC void put_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ); -HCF_STATIC void put_frag_finalize( IFBP ifbp ); -HCF_STATIC int setup_bap( IFBP ifbp, hcf_16 fid, int offset, int type ); +HCF_STATIC void put_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ); +HCF_STATIC void put_frag_finalize( IFBP ifbp ); +HCF_STATIC int setup_bap( IFBP ifbp, hcf_16 fid, int offset, int type ); #if (HCF_ASSERT) & HCF_ASSERT_PRINTF static int fw_printf(IFBP ifbp, CFG_FW_PRINTF_STRCT FAR *ltvp); #endif // HCF_ASSERT_PRINTF -HCF_STATIC int download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ); +HCF_STATIC int download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ); #if (HCF_ENCAP) & HCF_ENC -HCF_STATIC hcf_8 hcf_encap( wci_bufp type ); +HCF_STATIC hcf_8 hcf_encap( wci_bufp type ); #endif // HCF_ENCAP -HCF_STATIC hcf_8 null_addr[4] = { 0, 0, 0, 0 }; -#if ! defined IN_PORT_WORD //replace I/O Macros with logging facility +HCF_STATIC hcf_8 null_addr[4] = { 0, 0, 0, 0 }; +#if ! defined IN_PORT_WORD //replace I/O Macros with logging facility extern FILE *log_file; -#define IN_PORT_WORD(port) in_port_word( (hcf_io)(port) ) +#define IN_PORT_WORD(port) in_port_word( (hcf_io)(port) ) static hcf_16 in_port_word( hcf_io port ) { -hcf_16 i = (hcf_16)_inpw( port ); + hcf_16 i = (hcf_16)_inpw( port ); if ( log_file ) { fprintf( log_file, "\nR %2.2x %4.4x", (port)&0xFF, i); } return i; } // in_port_word -#define OUT_PORT_WORD(port, value) out_port_word( (hcf_io)(port), (hcf_16)(value) ) +#define OUT_PORT_WORD(port, value) out_port_word( (hcf_io)(port), (hcf_16)(value) ) static void out_port_word( hcf_io port, hcf_16 value ) { _outpw( port, value ); @@ -160,12 +159,12 @@ static void out_port_word( hcf_io port, hcf_16 value ) { } } -void IN_PORT_STRING_32( hcf_io prt, hcf_32 FAR * dst, int n) { +void IN_PORT_STRING_32( hcf_io prt, hcf_32 FAR * dst, int n) { int i = 0; hcf_16 FAR * p; if ( log_file ) { fprintf( log_file, "\nread string_32 length %04x (%04d) at port %02.2x to addr %lp", - (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF, dst); + (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF, dst); } while ( n-- ) { p = (hcf_16 FAR *)dst; @@ -178,12 +177,12 @@ void IN_PORT_STRING_32( hcf_io prt, hcf_32 FAR * dst, int n) { } } // IN_PORT_STRING_32 -void IN_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * dst, int n) { //also handles byte alignment problems - hcf_16 FAR * p = (hcf_16 FAR *)dst; //this needs more elaborate code in non-x86 platforms +void IN_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * dst, int n) { //also handles byte alignment problems + hcf_16 FAR * p = (hcf_16 FAR *)dst; //this needs more elaborate code in non-x86 platforms int i = 0; if ( log_file ) { fprintf( log_file, "\nread string_16 length %04x (%04d) at port %02.2x to addr %lp", - (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF, dst ); + (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF, dst ); } while ( n-- ) { *p =(hcf_16)_inpw( prt); @@ -198,12 +197,12 @@ void IN_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * dst, int n) { //also handles b } } // IN_PORT_STRING_8_16 -void OUT_PORT_STRING_32( hcf_io prt, hcf_32 FAR * src, int n) { +void OUT_PORT_STRING_32( hcf_io prt, hcf_32 FAR * src, int n) { int i = 0; hcf_16 FAR * p; if ( log_file ) { fprintf( log_file, "\nwrite string_32 length %04x (%04d) at port %02.2x", - (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF); + (hcf_16)n, (hcf_16)n, (hcf_16)(prt)&0xFF); } while ( n-- ) { p = (hcf_16 FAR *)src; @@ -216,8 +215,8 @@ void OUT_PORT_STRING_32( hcf_io prt, hcf_32 FAR * src, int n) { } } // OUT_PORT_STRING_32 -void OUT_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * src, int n) { //also handles byte alignment problems - hcf_16 FAR * p = (hcf_16 FAR *)src; //this needs more elaborate code in non-x86 platforms +void OUT_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * src, int n) { //also handles byte alignment problems + hcf_16 FAR * p = (hcf_16 FAR *)src; //this needs more elaborate code in non-x86 platforms int i = 0; if ( log_file ) { fprintf( log_file, "\nwrite string_16 length %04x (%04d) at port %04x", n, n, (hcf_16)prt); @@ -238,27 +237,27 @@ void OUT_PORT_STRING_8_16( hcf_io prt, hcf_8 FAR * src, int n) { //also handles #endif // IN_PORT_WORD /************************************************************************************************************ -******************************* D A T A D E F I N I T I O N S ******************************************** -************************************************************************************************************/ + ******************************* D A T A D E F I N I T I O N S ******************************************** + ************************************************************************************************************/ #if HCF_ASSERT -IFBP BASED assert_ifbp = NULL; //to make asserts easily work under MMD and DHF +IFBP BASED assert_ifbp = NULL; //to make asserts easily work under MMD and DHF #endif // HCF_ASSERT #if HCF_ENCAP /* SNAP header to be inserted in Ethernet-II frames */ -HCF_STATIC hcf_8 BASED snap_header[] = { 0xAA, 0xAA, 0x03, 0x00, 0x00, //5 bytes signature + - 0 }; //1 byte protocol identifier +HCF_STATIC hcf_8 BASED snap_header[] = { 0xAA, 0xAA, 0x03, 0x00, 0x00, //5 bytes signature + + 0 }; //1 byte protocol identifier #endif // HCF_ENCAP #if (HCF_TYPE) & HCF_TYPE_WPA -HCF_STATIC hcf_8 BASED mic_pad[8] = { 0x5A, 0, 0, 0, 0, 0, 0, 0 }; //MIC padding of message +HCF_STATIC hcf_8 BASED mic_pad[8] = { 0x5A, 0, 0, 0, 0, 0, 0, 0 }; //MIC padding of message #endif // HCF_TYPE_WPA #if defined MSF_COMPONENT_ID CFG_IDENTITY_STRCT BASED cfg_drv_identity = { - sizeof(cfg_drv_identity)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_IDENTITY, // (0x0826) + sizeof(cfg_drv_identity)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_IDENTITY, // (0x0826) MSF_COMPONENT_ID, MSF_COMPONENT_VAR, MSF_COMPONENT_MAJOR_VER, @@ -266,186 +265,186 @@ CFG_IDENTITY_STRCT BASED cfg_drv_identity = { } ; CFG_RANGES_STRCT BASED cfg_drv_sup_range = { - sizeof(cfg_drv_sup_range)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_SUP_RANGE, // (0x0827) + sizeof(cfg_drv_sup_range)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_SUP_RANGE, // (0x0827) COMP_ROLE_SUPL, COMP_ID_DUI, - {{ DUI_COMPAT_VAR, - DUI_COMPAT_BOT, - DUI_COMPAT_TOP + {{ DUI_COMPAT_VAR, + DUI_COMPAT_BOT, + DUI_COMPAT_TOP }} } ; struct CFG_RANGE3_STRCT BASED cfg_drv_act_ranges_pri = { - sizeof(cfg_drv_act_ranges_pri)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_ACT_RANGES_PRI, // (0x0828) + sizeof(cfg_drv_act_ranges_pri)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_ACT_RANGES_PRI, // (0x0828) COMP_ROLE_ACT, COMP_ID_PRI, { - { 0, 0, 0 }, // HCF_PRI_VAR_1 not supported by HCF 7 - { 0, 0, 0 }, // HCF_PRI_VAR_2 not supported by HCF 7 - { 3, //var_rec[2] - Variant number - CFG_DRV_ACT_RANGES_PRI_3_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_PRI_3_TOP // - Top Compatibility - } + { 0, 0, 0 }, // HCF_PRI_VAR_1 not supported by HCF 7 + { 0, 0, 0 }, // HCF_PRI_VAR_2 not supported by HCF 7 + { 3, //var_rec[2] - Variant number + CFG_DRV_ACT_RANGES_PRI_3_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_PRI_3_TOP // - Top Compatibility + } } } ; struct CFG_RANGE4_STRCT BASED cfg_drv_act_ranges_sta = { - sizeof(cfg_drv_act_ranges_sta)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_ACT_RANGES_STA, // (0x0829) + sizeof(cfg_drv_act_ranges_sta)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_ACT_RANGES_STA, // (0x0829) COMP_ROLE_ACT, COMP_ID_STA, { #if defined HCF_STA_VAR_1 - { 1, //var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_STA_1_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_STA_1_TOP // - Top Compatibility - }, + { 1, //var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_STA_1_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_STA_1_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_STA_VAR_1 #if defined HCF_STA_VAR_2 - { 2, //var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_STA_2_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_STA_2_TOP // - Top Compatibility - }, + { 2, //var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_STA_2_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_STA_2_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_STA_VAR_2 // For Native_USB (Not used!) #if defined HCF_STA_VAR_3 - { 3, //var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_STA_3_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_STA_3_TOP // - Top Compatibility - }, + { 3, //var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_STA_3_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_STA_3_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_STA_VAR_3 // Warp #if defined HCF_STA_VAR_4 - { 4, //var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_STA_4_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_STA_4_TOP // - Top Compatibility - } + { 4, //var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_STA_4_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_STA_4_TOP // - Top Compatibility + } #else - { 0, 0, 0 } + { 0, 0, 0 } #endif // HCF_STA_VAR_4 } } ; struct CFG_RANGE6_STRCT BASED cfg_drv_act_ranges_hsi = { - sizeof(cfg_drv_act_ranges_hsi)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_ACT_RANGES_HSI, // (0x082A) + sizeof(cfg_drv_act_ranges_hsi)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_ACT_RANGES_HSI, // (0x082A) COMP_ROLE_ACT, COMP_ID_HSI, { -#if defined HCF_HSI_VAR_0 // Controlled deployment - { 0, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_HSI_0_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_HSI_0_TOP // - Top Compatibility - }, +#if defined HCF_HSI_VAR_0 // Controlled deployment + { 0, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_HSI_0_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_HSI_0_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_HSI_VAR_0 - { 0, 0, 0 }, // HCF_HSI_VAR_1 not supported by HCF 7 - { 0, 0, 0 }, // HCF_HSI_VAR_2 not supported by HCF 7 - { 0, 0, 0 }, // HCF_HSI_VAR_3 not supported by HCF 7 -#if defined HCF_HSI_VAR_4 // Hermes-II all types - { 4, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_HSI_4_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_HSI_4_TOP // - Top Compatibility - }, + { 0, 0, 0 }, // HCF_HSI_VAR_1 not supported by HCF 7 + { 0, 0, 0 }, // HCF_HSI_VAR_2 not supported by HCF 7 + { 0, 0, 0 }, // HCF_HSI_VAR_3 not supported by HCF 7 +#if defined HCF_HSI_VAR_4 // Hermes-II all types + { 4, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_HSI_4_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_HSI_4_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_HSI_VAR_4 -#if defined HCF_HSI_VAR_5 // WARP Hermes-2.5 - { 5, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_HSI_5_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_HSI_5_TOP // - Top Compatibility - } +#if defined HCF_HSI_VAR_5 // WARP Hermes-2.5 + { 5, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_HSI_5_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_HSI_5_TOP // - Top Compatibility + } #else - { 0, 0, 0 } + { 0, 0, 0 } #endif // HCF_HSI_VAR_5 } } ; CFG_RANGE4_STRCT BASED cfg_drv_act_ranges_apf = { - sizeof(cfg_drv_act_ranges_apf)/sizeof(hcf_16) - 1, //length of RID - CFG_DRV_ACT_RANGES_APF, // (0x082B) + sizeof(cfg_drv_act_ranges_apf)/sizeof(hcf_16) - 1, //length of RID + CFG_DRV_ACT_RANGES_APF, // (0x082B) COMP_ROLE_ACT, COMP_ID_APF, { -#if defined HCF_APF_VAR_1 //(Fake) Hermes-I - { 1, //var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_APF_1_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_APF_1_TOP // - Top Compatibility - }, +#if defined HCF_APF_VAR_1 //(Fake) Hermes-I + { 1, //var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_APF_1_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_APF_1_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_APF_VAR_1 -#if defined HCF_APF_VAR_2 //Hermes-II - { 2, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_APF_2_BOTTOM, // - Bottom Compatibility - CFG_DRV_ACT_RANGES_APF_2_TOP // - Top Compatibility - }, +#if defined HCF_APF_VAR_2 //Hermes-II + { 2, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_APF_2_BOTTOM, // - Bottom Compatibility + CFG_DRV_ACT_RANGES_APF_2_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_APF_VAR_2 -#if defined HCF_APF_VAR_3 // Native_USB - { 3, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_APF_3_BOTTOM, // - Bottom Compatibility !!!!!see note below!!!!!!! - CFG_DRV_ACT_RANGES_APF_3_TOP // - Top Compatibility - }, +#if defined HCF_APF_VAR_3 // Native_USB + { 3, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_APF_3_BOTTOM, // - Bottom Compatibility !!!!!see note below!!!!!!! + CFG_DRV_ACT_RANGES_APF_3_TOP // - Top Compatibility + }, #else - { 0, 0, 0 }, + { 0, 0, 0 }, #endif // HCF_APF_VAR_3 -#if defined HCF_APF_VAR_4 // WARP Hermes 2.5 - { 4, // var_rec[1] - Variant number - CFG_DRV_ACT_RANGES_APF_4_BOTTOM, // - Bottom Compatibility !!!!!see note below!!!!!!! - CFG_DRV_ACT_RANGES_APF_4_TOP // - Top Compatibility - } +#if defined HCF_APF_VAR_4 // WARP Hermes 2.5 + { 4, // var_rec[1] - Variant number + CFG_DRV_ACT_RANGES_APF_4_BOTTOM, // - Bottom Compatibility !!!!!see note below!!!!!!! + CFG_DRV_ACT_RANGES_APF_4_TOP // - Top Compatibility + } #else - { 0, 0, 0 } + { 0, 0, 0 } #endif // HCF_APF_VAR_4 } } ; #define HCF_VERSION TEXT( "HCF$Revision: 1.10 $" ) static struct /*CFG_HCF_OPT_STRCT*/ { - hcf_16 len; //length of cfg_hcf_opt struct - hcf_16 typ; //type 0x082C - hcf_16 v0; //offset HCF_VERSION - hcf_16 v1; // MSF_COMPONENT_ID - hcf_16 v2; // HCF_ALIGN - hcf_16 v3; // HCF_ASSERT - hcf_16 v4; // HCF_BIG_ENDIAN - hcf_16 v5; // /* HCF_DLV | HCF_DLNV */ - hcf_16 v6; // HCF_DMA - hcf_16 v7; // HCF_ENCAP - hcf_16 v8; // HCF_EXT - hcf_16 v9; // HCF_INT_ON - hcf_16 v10; // HCF_IO - hcf_16 v11; // HCF_LEGACY - hcf_16 v12; // HCF_MAX_LTV - hcf_16 v13; // HCF_PROT_TIME - hcf_16 v14; // HCF_SLEEP - hcf_16 v15; // HCF_TALLIES - hcf_16 v16; // HCF_TYPE - hcf_16 v17; // HCF_NIC_TAL_CNT - hcf_16 v18; // HCF_HCF_TAL_CNT - hcf_16 v19; // offset tallies - TCHAR val[sizeof(HCF_VERSION)]; + hcf_16 len; //length of cfg_hcf_opt struct + hcf_16 typ; //type 0x082C + hcf_16 v0; //offset HCF_VERSION + hcf_16 v1; // MSF_COMPONENT_ID + hcf_16 v2; // HCF_ALIGN + hcf_16 v3; // HCF_ASSERT + hcf_16 v4; // HCF_BIG_ENDIAN + hcf_16 v5; // /* HCF_DLV | HCF_DLNV */ + hcf_16 v6; // HCF_DMA + hcf_16 v7; // HCF_ENCAP + hcf_16 v8; // HCF_EXT + hcf_16 v9; // HCF_INT_ON + hcf_16 v10; // HCF_IO + hcf_16 v11; // HCF_LEGACY + hcf_16 v12; // HCF_MAX_LTV + hcf_16 v13; // HCF_PROT_TIME + hcf_16 v14; // HCF_SLEEP + hcf_16 v15; // HCF_TALLIES + hcf_16 v16; // HCF_TYPE + hcf_16 v17; // HCF_NIC_TAL_CNT + hcf_16 v18; // HCF_HCF_TAL_CNT + hcf_16 v19; // offset tallies + TCHAR val[sizeof(HCF_VERSION)]; } BASED cfg_hcf_opt = { sizeof(cfg_hcf_opt)/sizeof(hcf_16) -1, - CFG_HCF_OPT, // (0x082C) + CFG_HCF_OPT, // (0x082C) ( sizeof(cfg_hcf_opt) - sizeof(HCF_VERSION) - 4 )/sizeof(hcf_16), #if defined MSF_COMPONENT_ID MSF_COMPONENT_ID, @@ -455,7 +454,7 @@ static struct /*CFG_HCF_OPT_STRCT*/ { HCF_ALIGN, HCF_ASSERT, HCF_BIG_ENDIAN, - 0, // /* HCF_DLV | HCF_DLNV*/, + 0, // /* HCF_DLV | HCF_DLNV*/, HCF_DMA, HCF_ENCAP, HCF_EXT, @@ -488,208 +487,208 @@ HCF_STATIC LTV_STRCT BASED cfg_null = { 1, CFG_NULL, {0} }; #endif // HCF_EXT_MB HCF_STATIC hcf_16* BASED xxxx[ ] = { #if (HCF_EXT) & HCF_EXT_MB - &cfg_null.len, //CFG_NULL 0x0820 + &cfg_null.len, //CFG_NULL 0x0820 #endif // HCF_EXT_MB #if defined MSF_COMPONENT_ID - &cfg_drv_identity.len, //CFG_DRV_IDENTITY 0x0826 - &cfg_drv_sup_range.len, //CFG_DRV_SUP_RANGE 0x0827 - &cfg_drv_act_ranges_pri.len, //CFG_DRV_ACT_RANGES_PRI 0x0828 - &cfg_drv_act_ranges_sta.len, //CFG_DRV_ACT_RANGES_STA 0x0829 - &cfg_drv_act_ranges_hsi.len, //CFG_DRV_ACT_RANGES_HSI 0x082A - &cfg_drv_act_ranges_apf.len, //CFG_DRV_ACT_RANGES_APF 0x082B - &cfg_hcf_opt.len, //CFG_HCF_OPT 0x082C - NULL, //IFB_PRIIdentity placeholder 0xFD02 - NULL, //IFB_PRISup placeholder 0xFD03 + &cfg_drv_identity.len, //CFG_DRV_IDENTITY 0x0826 + &cfg_drv_sup_range.len, //CFG_DRV_SUP_RANGE 0x0827 + &cfg_drv_act_ranges_pri.len, //CFG_DRV_ACT_RANGES_PRI 0x0828 + &cfg_drv_act_ranges_sta.len, //CFG_DRV_ACT_RANGES_STA 0x0829 + &cfg_drv_act_ranges_hsi.len, //CFG_DRV_ACT_RANGES_HSI 0x082A + &cfg_drv_act_ranges_apf.len, //CFG_DRV_ACT_RANGES_APF 0x082B + &cfg_hcf_opt.len, //CFG_HCF_OPT 0x082C + NULL, //IFB_PRIIdentity placeholder 0xFD02 + NULL, //IFB_PRISup placeholder 0xFD03 #endif // MSF_COMPONENT_ID - NULL //endsentinel - }; -#define xxxx_PRI_IDENTITY_OFFSET (ARRAY_SIZE(xxxx) - 3) + NULL //endsentinel +}; +#define xxxx_PRI_IDENTITY_OFFSET (ARRAY_SIZE(xxxx) - 3) #endif // MSF_COMPONENT_ID / HCF_EXT_MB /************************************************************************************************************ -************************** T O P L E V E L H C F R O U T I N E S ************************************** -************************************************************************************************************/ + ************************** T O P L E V E L H C F R O U T I N E S ************************************** + ************************************************************************************************************/ #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.MODULE int hcf_action( IFBP ifbp, hcf_16 action ) -*.PURPOSE Changes the run-time Card behavior. -* Performs Miscellanuous actions. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* action number identifying the type of change -* - HCF_ACT_CCX_OFF disable CKIP -* - HCF_ACT_CCX_ON enable CKIP -* - HCF_ACT_INT_FORCE_ON enable interrupt generation by WaveLAN NIC -* - HCF_ACT_INT_OFF disable interrupt generation by WaveLAN NIC -* - HCF_ACT_INT_ON compensate 1 HCF_ACT_INT_OFF, enable interrupt generation if balance reached -* - HCF_ACT_PRS_SCAN Hermes Probe Respons Scan (F102) command -* - HCF_ACT_RX_ACK acknowledge non-DMA receiver to Hermes -* - HCF_ACT_SCAN Hermes Inquire Scan (F101) command (non-WARP only) -* - HCF_ACT_SLEEP DDS Sleep request -* - HCF_ACT_TALLIES Hermes Inquire Tallies (F100) command -* -*.RETURNS -* HCF_SUCCESS all (including invalid) -* HCF_INT_PENDING HCF_ACT_INT_OFF, interrupt pending -* HCF_ERR_NO_NIC HCF_ACT_INT_OFF, NIC presence check fails -* -*.CONDITIONS -* Except for hcf_action with HCF_ACT_INT_FORCE_ON or HCF_ACT_INT_OFF as parameter or hcf_connect with an I/O -* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceded by a call of hcf_action with -* HCF_ACT_INT_OFF as parameter. -* Note that hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF ) -* was called. -* -*.DESCRIPTION -* hcf_action supports the following mode changing action-code pairs that are antonyms -* - HCF_ACT_CCX_OFF / HCF_ACT_CCX_ON -* - HCF_ACT_INT_[FORCE_]ON / HCF_ACT_INT_OFF -* -* Additionally hcf_action can start the following actions in the NIC: -* - HCF_ACT_PRS_SCAN -* - HCF_ACT_RX_ACK -* - HCF_ACT_SCAN -* - HCF_ACT_SLEEP -* - HCF_ACT_TALLIES -* -* o HCF_ACT_INT_OFF: Sets NIC Interrupts mode Disabled. -* This command, and the associated [Force] Enable NIC interrupts command, are only available if the HCF_INT_ON -* compile time option is not set at 0x0000. -* -* o HCF_ACT_INT_ON: Sets NIC Interrupts mode Enabled. -* Enable NIC Interrupts, depending on the number of preceding Disable NIC Interrupt calls. -* -* o HCF_ACT_INT_FORCE_ON: Force NIC Interrupts mode Enabled. -* Sets NIC Interrupts mode Enabled, regardless off the number of preceding Disable NIC Interrupt calls. -* -* The disabling and enabling of interrupts are antonyms. -* These actions must be balanced. -* For each "disable interrupts" there must be a matching "enable interrupts". -* The disable interrupts may be executed multiple times in a row without intervening enable interrupts, in -* other words, the disable interrupts may be nested. -* The interrupt generation mechanism is disabled at the first call with HCF_ACT_INT_OFF. -* The interrupt generation mechanism is re-enabled when the number of calls with HCF_ACT_INT_ON matches the -* number of calls with INT_OFF. -* -* It is not allowed to have more Enable NIC Interrupts calls than Disable NIC Interrupts calls. -* The interrupt generation mechanism is initially (i.e. after hcf_connect) disabled. -* An MSF based on a interrupt strategy must call hcf_action with INT_ON in its initialization logic. -* -*! The INT_OFF/INT_ON housekeeping is initialized at 0x0000 by hcf_connect, causing the interrupt generation -* mechanism to be disabled at first. This suits MSF implementation based on a polling strategy. -* -* o HCF_ACT_CCX_OFF / HCF_ACT_CCX_ON -*!! This can use some more explanation;? -* Disables and Enables support in the HCF runtime code for the CCX feature. Each time one of these action -* codes is used, the effects of the preceding use cease. -* -* o HCF_ACT_SLEEP: Initiates the Disconnected DeepSleep process -* This command is only available if the HCF_DDS compile time option is set. It triggers the F/W to start the -* sleep handshaking. Regardless whether the Host initiates a Disconnected DeepSleep (DDS) or the F/W initiates -* a Connected DeepSleep (CDS), the Host-F/W sleep handshaking is completed when the NIC Interrupts mode is -* enabled (by means of the balancing HCF_ACT_INT_ON), i.e. at that moment the F/W really goes into sleep mode. -* The F/W is wokenup by the HCF when the NIC Interrupts mode are disabled, i.e. at the first HCF_ACT_INT_OFF -* after going into sleep. -* -* The following Miscellanuous actions are defined: -* -* o HCF_ACT_RX_ACK: Receiver Acknowledgement (non-DMA, non-USB mode only) -* Acking the receiver, frees the NIC memory used to hold the Rx frame and allows the F/W to -* report the existence of the next Rx frame. -* If the MSF does not need access (any longer) to the current frame, e.g. because it is rejected based on the -* look ahead or copied to another buffer, the receiver may be acked. Acking earlier is assumed to have the -* potential of improving the performance. -* If the MSF does not explitly ack te receiver, the acking is done implicitly if: -* - the received frame fits in the look ahead buffer, by the hcf_service_nic call that reported the Rx frame -* - if not in the above step, by hcf_rcv_msg (assuming hcf_rcv_msg is called) -* - if neither of the above implicit acks nor an explicit ack by the MSF, by the first hcf_service_nic after -* the hcf_service_nic that reported the Rx frame. -* Note: If an Rx frame is already acked, an explicit ACK by the MSF acts as a NoOperation. -* -* o HCF_ACT_TALLIES: Inquire Tallies command -* This command is only operational if the F/W is enabled. -* The Inquire Tallies command requests the F/W to provide its current set of tallies. -* See also hcf_get_info with CFG_TALLIES as parameter. -* -* o HCF_ACT_PRS_SCAN: Inquire Probe Respons Scan command -* This command is only operational if the F/W is enabled. -* The Probe Respons Scan command starts a scan sequence. -* The HCF puts the result of this action in an MSF defined buffer (see CFG_RID_LOG_STRCT). -* -* o HCF_ACT_SCAN: Inquire Scan command -* This command is only supported for HII F/W (i.e. pre-WARP) and it is operational if the F/W is enabled. -* The Inquire Scan command starts a scan sequence. -* The HCF puts the result of this action in an MSF defined buffer (see CFG_RID_LOG_STRCT). -* -* Assert fails if -* - ifbp has a recognizable out-of-range value. -* - NIC interrupts are not disabled while required by parameter action. -* - an invalid code is specified in parameter action. -* - HCF_ACT_INT_ON commands outnumber the HCF_ACT_INT_OFF commands. -* - reentrancy, may be caused by calling hcf_functions without adequate protection against NIC interrupts or -* multi-threading -* -* - Since the HCF does not maintain status information relative to the F/W enabled state, it is not asserted -* whether HCF_ACT_SCAN, HCF_ACT_PRS_SCAN or HCF_ACT_TALLIES are only used while F/W is enabled. -* -*.DIAGRAM -* 0: The assert embedded in HCFLOGENTRY checks against re-entrancy. Re-entrancy could be caused by a MSF logic -* at task-level calling hcf_functions without shielding with HCF_ACT_ON/_OFF. However the HCF_ACT_INT_OFF -* action itself can per definition not be protected this way. Based on code inspection, it can be concluded, -* that there is no re-entrancy PROBLEM in this particular flow. It does not seem worth the trouble to -* explicitly check for this condition (although there was a report of an MSF which ran into this assert. -* 2:IFB_IntOffCnt is used to balance the INT_OFF and INT_ON calls. Disabling of the interrupts is achieved by -* writing a zero to the Hermes IntEn register. In a shared interrupt environment (e.g. the mini-PCI NDIS -* driver) it is considered more correct to return the status HCF_INT_PENDING if and only if, the current -* invocation of hcf_service_nic is (apparently) called in the ISR when the ISR was activated as result of a -* change in HREG_EV_STAT matching a bit in HREG_INT_EN, i.e. not if invoked as result of another device -* generating an interrupt on the shared interrupt line. -* Note 1: it has been observed that under certain adverse conditions on certain platforms the writing of -* HREG_INT_EN can apparently fail, therefor it is paramount that HREG_INT_EN is written again with 0 for -* each and every call to HCF_ACT_INT_OFF. -* Note 2: it has been observed that under certain H/W & S/W architectures this logic is called when there is -* no NIC at all. To cater for this, the value of HREG_INT_EN is validated. If the unused bit 0x0100 is set, -* it is assumed there is no NIC. -* Note 3: During the download process, some versions of the F/W reset HREG_SW_0, hence checking this -* register for HCF_MAGIC (the classical NIC presence test) when HCF_ACT_INT_OFF is called due to another -* card interrupting via a shared IRQ during a download, fails. -*4: The construction "if ( ifbp->IFB_IntOffCnt-- == 0 )" is optimal (in the sense of shortest/quickest -* path in error free flows) but NOT fail safe in case of too many INT_ON invocations compared to INT_OFF). -* Enabling of the interrupts is achieved by writing the Hermes IntEn register. -* - If the HCF is in Defunct mode, the interrupts stay disabled. -* - Under "normal" conditions, the HCF is only interested in Info Events, Rx Events and Notify Events. -* - When the HCF is out of Tx/Notify resources, the HCF is also interested in Alloc Events. -* - via HCF_EXT, the MSF programmer can also request HREG_EV_TICK and/or HREG_EV_TX_EXC interrupts. -* For DMA operation, the DMA hardware handles the alloc events. The DMA engine will generate a 'TxDmaDone' -* event as soon as it has pumped a frame from host ram into NIC-RAM (note that the frame does not have to be -* transmitted then), and a 'RxDmaDone' event as soon as a received frame has been pumped from NIC-RAM into -* host ram. Note that the 'alloc' event has been removed from the event-mask, because the DMA engine will -* react to and acknowledge this event. -*6: ack the "old" Rx-event. See "Rx Buffer free strategy" in hcf_service_nic above for more explanation. -* IFB_RxFID and IFB_RxLen must be cleared to bring both the internal HCF house keeping and the information -* supplied to the MSF in the state "no frame received". -*8: The HCF_ACT_SCAN, HCF_ACT_PRS_SCAN and HCF_ACT_TALLIES activity are merged by "clever" algebraic -* manipulations of the RID-values and action codes, so foregoing robustness against migration problems for -* ease of implementation. The assumptions about numerical relationships between CFG_TALLIES etc and -* HCF_ACT_TALLIES etc are checked by the "#if" statements just prior to the body of this routine, resulting -* in: err "maintenance" during compilation if the assumptions are no longer met. The writing of HREG_PARAM_1 -* with 0x3FFF in case of an PRS scan, is a kludge to get around lack of specification, hence different -* implementation in F/W and Host. -* When there is no NIC RAM available, some versions of the Hermes F/W do report 0x7F00 as error in the -* Result field of the Status register and some F/W versions don't. To mask this difference to the MSF all -* return codes of the Hermes are ignored ("best" and "most simple" solution to these types of analomies with -* an acceptable loss due to ignoring all error situations as well). -* The "No inquire space" is reported via the Hermes tallies. -*30: do not HCFASSERT( rc, rc ) since rc == HCF_INT_PENDING is no error -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE int hcf_action( IFBP ifbp, hcf_16 action ) + *.PURPOSE Changes the run-time Card behavior. + * Performs Miscellanuous actions. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * action number identifying the type of change + * - HCF_ACT_CCX_OFF disable CKIP + * - HCF_ACT_CCX_ON enable CKIP + * - HCF_ACT_INT_FORCE_ON enable interrupt generation by WaveLAN NIC + * - HCF_ACT_INT_OFF disable interrupt generation by WaveLAN NIC + * - HCF_ACT_INT_ON compensate 1 HCF_ACT_INT_OFF, enable interrupt generation if balance reached + * - HCF_ACT_PRS_SCAN Hermes Probe Respons Scan (F102) command + * - HCF_ACT_RX_ACK acknowledge non-DMA receiver to Hermes + * - HCF_ACT_SCAN Hermes Inquire Scan (F101) command (non-WARP only) + * - HCF_ACT_SLEEP DDS Sleep request + * - HCF_ACT_TALLIES Hermes Inquire Tallies (F100) command + * + *.RETURNS + * HCF_SUCCESS all (including invalid) + * HCF_INT_PENDING HCF_ACT_INT_OFF, interrupt pending + * HCF_ERR_NO_NIC HCF_ACT_INT_OFF, NIC presence check fails + * + *.CONDITIONS + * Except for hcf_action with HCF_ACT_INT_FORCE_ON or HCF_ACT_INT_OFF as parameter or hcf_connect with an I/O + * address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceded by a call of hcf_action with + * HCF_ACT_INT_OFF as parameter. + * Note that hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF ) + * was called. + * + *.DESCRIPTION + * hcf_action supports the following mode changing action-code pairs that are antonyms + * - HCF_ACT_CCX_OFF / HCF_ACT_CCX_ON + * - HCF_ACT_INT_[FORCE_]ON / HCF_ACT_INT_OFF + * + * Additionally hcf_action can start the following actions in the NIC: + * - HCF_ACT_PRS_SCAN + * - HCF_ACT_RX_ACK + * - HCF_ACT_SCAN + * - HCF_ACT_SLEEP + * - HCF_ACT_TALLIES + * + * o HCF_ACT_INT_OFF: Sets NIC Interrupts mode Disabled. + * This command, and the associated [Force] Enable NIC interrupts command, are only available if the HCF_INT_ON + * compile time option is not set at 0x0000. + * + * o HCF_ACT_INT_ON: Sets NIC Interrupts mode Enabled. + * Enable NIC Interrupts, depending on the number of preceding Disable NIC Interrupt calls. + * + * o HCF_ACT_INT_FORCE_ON: Force NIC Interrupts mode Enabled. + * Sets NIC Interrupts mode Enabled, regardless off the number of preceding Disable NIC Interrupt calls. + * + * The disabling and enabling of interrupts are antonyms. + * These actions must be balanced. + * For each "disable interrupts" there must be a matching "enable interrupts". + * The disable interrupts may be executed multiple times in a row without intervening enable interrupts, in + * other words, the disable interrupts may be nested. + * The interrupt generation mechanism is disabled at the first call with HCF_ACT_INT_OFF. + * The interrupt generation mechanism is re-enabled when the number of calls with HCF_ACT_INT_ON matches the + * number of calls with INT_OFF. + * + * It is not allowed to have more Enable NIC Interrupts calls than Disable NIC Interrupts calls. + * The interrupt generation mechanism is initially (i.e. after hcf_connect) disabled. + * An MSF based on a interrupt strategy must call hcf_action with INT_ON in its initialization logic. + * + *! The INT_OFF/INT_ON housekeeping is initialized at 0x0000 by hcf_connect, causing the interrupt generation + * mechanism to be disabled at first. This suits MSF implementation based on a polling strategy. + * + * o HCF_ACT_CCX_OFF / HCF_ACT_CCX_ON + *!! This can use some more explanation;? + * Disables and Enables support in the HCF runtime code for the CCX feature. Each time one of these action + * codes is used, the effects of the preceding use cease. + * + * o HCF_ACT_SLEEP: Initiates the Disconnected DeepSleep process + * This command is only available if the HCF_DDS compile time option is set. It triggers the F/W to start the + * sleep handshaking. Regardless whether the Host initiates a Disconnected DeepSleep (DDS) or the F/W initiates + * a Connected DeepSleep (CDS), the Host-F/W sleep handshaking is completed when the NIC Interrupts mode is + * enabled (by means of the balancing HCF_ACT_INT_ON), i.e. at that moment the F/W really goes into sleep mode. + * The F/W is wokenup by the HCF when the NIC Interrupts mode are disabled, i.e. at the first HCF_ACT_INT_OFF + * after going into sleep. + * + * The following Miscellanuous actions are defined: + * + * o HCF_ACT_RX_ACK: Receiver Acknowledgement (non-DMA, non-USB mode only) + * Acking the receiver, frees the NIC memory used to hold the Rx frame and allows the F/W to + * report the existence of the next Rx frame. + * If the MSF does not need access (any longer) to the current frame, e.g. because it is rejected based on the + * look ahead or copied to another buffer, the receiver may be acked. Acking earlier is assumed to have the + * potential of improving the performance. + * If the MSF does not explitly ack te receiver, the acking is done implicitly if: + * - the received frame fits in the look ahead buffer, by the hcf_service_nic call that reported the Rx frame + * - if not in the above step, by hcf_rcv_msg (assuming hcf_rcv_msg is called) + * - if neither of the above implicit acks nor an explicit ack by the MSF, by the first hcf_service_nic after + * the hcf_service_nic that reported the Rx frame. + * Note: If an Rx frame is already acked, an explicit ACK by the MSF acts as a NoOperation. + * + * o HCF_ACT_TALLIES: Inquire Tallies command + * This command is only operational if the F/W is enabled. + * The Inquire Tallies command requests the F/W to provide its current set of tallies. + * See also hcf_get_info with CFG_TALLIES as parameter. + * + * o HCF_ACT_PRS_SCAN: Inquire Probe Respons Scan command + * This command is only operational if the F/W is enabled. + * The Probe Respons Scan command starts a scan sequence. + * The HCF puts the result of this action in an MSF defined buffer (see CFG_RID_LOG_STRCT). + * + * o HCF_ACT_SCAN: Inquire Scan command + * This command is only supported for HII F/W (i.e. pre-WARP) and it is operational if the F/W is enabled. + * The Inquire Scan command starts a scan sequence. + * The HCF puts the result of this action in an MSF defined buffer (see CFG_RID_LOG_STRCT). + * + * Assert fails if + * - ifbp has a recognizable out-of-range value. + * - NIC interrupts are not disabled while required by parameter action. + * - an invalid code is specified in parameter action. + * - HCF_ACT_INT_ON commands outnumber the HCF_ACT_INT_OFF commands. + * - reentrancy, may be caused by calling hcf_functions without adequate protection against NIC interrupts or + * multi-threading + * + * - Since the HCF does not maintain status information relative to the F/W enabled state, it is not asserted + * whether HCF_ACT_SCAN, HCF_ACT_PRS_SCAN or HCF_ACT_TALLIES are only used while F/W is enabled. + * + *.DIAGRAM + * 0: The assert embedded in HCFLOGENTRY checks against re-entrancy. Re-entrancy could be caused by a MSF logic + * at task-level calling hcf_functions without shielding with HCF_ACT_ON/_OFF. However the HCF_ACT_INT_OFF + * action itself can per definition not be protected this way. Based on code inspection, it can be concluded, + * that there is no re-entrancy PROBLEM in this particular flow. It does not seem worth the trouble to + * explicitly check for this condition (although there was a report of an MSF which ran into this assert. + * 2:IFB_IntOffCnt is used to balance the INT_OFF and INT_ON calls. Disabling of the interrupts is achieved by + * writing a zero to the Hermes IntEn register. In a shared interrupt environment (e.g. the mini-PCI NDIS + * driver) it is considered more correct to return the status HCF_INT_PENDING if and only if, the current + * invocation of hcf_service_nic is (apparently) called in the ISR when the ISR was activated as result of a + * change in HREG_EV_STAT matching a bit in HREG_INT_EN, i.e. not if invoked as result of another device + * generating an interrupt on the shared interrupt line. + * Note 1: it has been observed that under certain adverse conditions on certain platforms the writing of + * HREG_INT_EN can apparently fail, therefor it is paramount that HREG_INT_EN is written again with 0 for + * each and every call to HCF_ACT_INT_OFF. + * Note 2: it has been observed that under certain H/W & S/W architectures this logic is called when there is + * no NIC at all. To cater for this, the value of HREG_INT_EN is validated. If the unused bit 0x0100 is set, + * it is assumed there is no NIC. + * Note 3: During the download process, some versions of the F/W reset HREG_SW_0, hence checking this + * register for HCF_MAGIC (the classical NIC presence test) when HCF_ACT_INT_OFF is called due to another + * card interrupting via a shared IRQ during a download, fails. + *4: The construction "if ( ifbp->IFB_IntOffCnt-- == 0 )" is optimal (in the sense of shortest/quickest + * path in error free flows) but NOT fail safe in case of too many INT_ON invocations compared to INT_OFF). + * Enabling of the interrupts is achieved by writing the Hermes IntEn register. + * - If the HCF is in Defunct mode, the interrupts stay disabled. + * - Under "normal" conditions, the HCF is only interested in Info Events, Rx Events and Notify Events. + * - When the HCF is out of Tx/Notify resources, the HCF is also interested in Alloc Events. + * - via HCF_EXT, the MSF programmer can also request HREG_EV_TICK and/or HREG_EV_TX_EXC interrupts. + * For DMA operation, the DMA hardware handles the alloc events. The DMA engine will generate a 'TxDmaDone' + * event as soon as it has pumped a frame from host ram into NIC-RAM (note that the frame does not have to be + * transmitted then), and a 'RxDmaDone' event as soon as a received frame has been pumped from NIC-RAM into + * host ram. Note that the 'alloc' event has been removed from the event-mask, because the DMA engine will + * react to and acknowledge this event. + *6: ack the "old" Rx-event. See "Rx Buffer free strategy" in hcf_service_nic above for more explanation. + * IFB_RxFID and IFB_RxLen must be cleared to bring both the internal HCF house keeping and the information + * supplied to the MSF in the state "no frame received". + *8: The HCF_ACT_SCAN, HCF_ACT_PRS_SCAN and HCF_ACT_TALLIES activity are merged by "clever" algebraic + * manipulations of the RID-values and action codes, so foregoing robustness against migration problems for + * ease of implementation. The assumptions about numerical relationships between CFG_TALLIES etc and + * HCF_ACT_TALLIES etc are checked by the "#if" statements just prior to the body of this routine, resulting + * in: err "maintenance" during compilation if the assumptions are no longer met. The writing of HREG_PARAM_1 + * with 0x3FFF in case of an PRS scan, is a kludge to get around lack of specification, hence different + * implementation in F/W and Host. + * When there is no NIC RAM available, some versions of the Hermes F/W do report 0x7F00 as error in the + * Result field of the Status register and some F/W versions don't. To mask this difference to the MSF all + * return codes of the Hermes are ignored ("best" and "most simple" solution to these types of analomies with + * an acceptable loss due to ignoring all error situations as well). + * The "No inquire space" is reported via the Hermes tallies. + *30: do not HCFASSERT( rc, rc ) since rc == HCF_INT_PENDING is no error + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ #if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0 #if CFG_SCAN != CFG_TALLIES - HCF_ACT_TALLIES + HCF_ACT_SCAN err: "maintenance" apparently inviolated the underlying assumption about the numerical values of these macros @@ -701,43 +700,43 @@ err: "maintenance" apparently inviolated the underlying assumption about the num int hcf_action( IFBP ifbp, hcf_16 action ) { -int rc = HCF_SUCCESS; + int rc = HCF_SUCCESS; HCFASSERT( ifbp->IFB_Magic == HCF_MAGIC, ifbp->IFB_Magic ); #if HCF_INT_ON - HCFLOGENTRY( action == HCF_ACT_INT_FORCE_ON ? HCF_TRACE_ACTION_KLUDGE : HCF_TRACE_ACTION, action ); /* 0 */ + HCFLOGENTRY( action == HCF_ACT_INT_FORCE_ON ? HCF_TRACE_ACTION_KLUDGE : HCF_TRACE_ACTION, action ); /* 0 */ #if (HCF_SLEEP) HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFE || action == HCF_ACT_INT_OFF, - MERGE_2( action, ifbp->IFB_IntOffCnt ) ); + MERGE_2( action, ifbp->IFB_IntOffCnt ) ); #else HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFE, action ); #endif // HCF_SLEEP HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF || - action == HCF_ACT_INT_OFF || action == HCF_ACT_INT_FORCE_ON, action ); + action == HCF_ACT_INT_OFF || action == HCF_ACT_INT_FORCE_ON, action ); HCFASSERT( ifbp->IFB_IntOffCnt <= 16 || ifbp->IFB_IntOffCnt >= 0xFFFE, - MERGE_2( action, ifbp->IFB_IntOffCnt ) ); //nesting more than 16 deep seems unreasonable + MERGE_2( action, ifbp->IFB_IntOffCnt ) ); //nesting more than 16 deep seems unreasonable #endif // HCF_INT_ON switch (action) { #if HCF_INT_ON -hcf_16 i; - case HCF_ACT_INT_OFF: // Disable Interrupt generation + hcf_16 i; + case HCF_ACT_INT_OFF: // Disable Interrupt generation #if HCF_SLEEP - if ( ifbp->IFB_IntOffCnt == 0xFFFE ) { // WakeUp test ;?tie this to the "new" super-LinkStat - ifbp->IFB_IntOffCnt++; // restore conventional I/F - OPW(HREG_IO, HREG_IO_WAKEUP_ASYNC ); // set wakeup bit - OPW(HREG_IO, HREG_IO_WAKEUP_ASYNC ); // set wakeup bit to counteract the clearing by F/W + if ( ifbp->IFB_IntOffCnt == 0xFFFE ) { // WakeUp test ;?tie this to the "new" super-LinkStat + ifbp->IFB_IntOffCnt++; // restore conventional I/F + OPW(HREG_IO, HREG_IO_WAKEUP_ASYNC ); // set wakeup bit + OPW(HREG_IO, HREG_IO_WAKEUP_ASYNC ); // set wakeup bit to counteract the clearing by F/W // 800 us latency before FW switches to high power - MSF_WAIT(800); // MSF-defined function to wait n microseconds. -//OOR if ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_DS_OOR ) { // OutOfRange -// printk( "<5>ACT_INT_OFF: Deepsleep phase terminated, enable and go to AwaitConnection\n" ); //;?remove me 1 day + MSF_WAIT(800); // MSF-defined function to wait n microseconds. +//OOR if ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_DS_OOR ) { // OutOfRange +// printk( "<5>ACT_INT_OFF: Deepsleep phase terminated, enable and go to AwaitConnection\n" ); //;?remove me 1 day // hcf_cntl( ifbp, HCF_CNTL_ENABLE ); // } -// ifbp->IFB_DSLinkStat &= ~( CFG_LINK_STAT_DS_IR | CFG_LINK_STAT_DS_OOR); //clear IR/OOR state +// ifbp->IFB_DSLinkStat &= ~( CFG_LINK_STAT_DS_IR | CFG_LINK_STAT_DS_OOR); //clear IR/OOR state } #endif // HCF_SLEEP -/*2*/ ifbp->IFB_IntOffCnt++; -//! rc = 0; + /*2*/ ifbp->IFB_IntOffCnt++; +//! rc = 0; i = IPW( HREG_INT_EN ); OPW( HREG_INT_EN, 0 ); if ( i & 0x1000 ) { @@ -749,89 +748,89 @@ hcf_16 i; } break; - case HCF_ACT_INT_FORCE_ON: // Enforce Enable Interrupt generation + case HCF_ACT_INT_FORCE_ON: // Enforce Enable Interrupt generation ifbp->IFB_IntOffCnt = 0; //Fall through in HCF_ACT_INT_ON - case HCF_ACT_INT_ON: // Enable Interrupt generation -/*4*/ if ( ifbp->IFB_IntOffCnt-- == 0 && ifbp->IFB_CardStat == 0 ) { - //determine Interrupt Event mask + case HCF_ACT_INT_ON: // Enable Interrupt generation + /*4*/ if ( ifbp->IFB_IntOffCnt-- == 0 && ifbp->IFB_CardStat == 0 ) { + //determine Interrupt Event mask #if HCF_DMA if ( ifbp->IFB_CntlOpt & USE_DMA ) { - i = HREG_EV_INFO | HREG_EV_RDMAD | HREG_EV_TDMAD | HREG_EV_TX_EXT; //mask when DMA active + i = HREG_EV_INFO | HREG_EV_RDMAD | HREG_EV_TDMAD | HREG_EV_TX_EXT; //mask when DMA active } else #endif // HCF_DMA { - i = HREG_EV_INFO | HREG_EV_RX | HREG_EV_TX_EXT; //mask when DMA not active + i = HREG_EV_INFO | HREG_EV_RX | HREG_EV_TX_EXT; //mask when DMA not active if ( ifbp->IFB_RscInd == 0 ) { - i |= HREG_EV_ALLOC; //mask when no TxFID available + i |= HREG_EV_ALLOC; //mask when no TxFID available } } #if HCF_SLEEP if ( ( IPW(HREG_EV_STAT) & ( i | HREG_EV_SLEEP_REQ ) ) == HREG_EV_SLEEP_REQ ) { // firmware indicates it would like to go into sleep modus // only acknowledge this request if no other events that can cause an interrupt are pending - ifbp->IFB_IntOffCnt--; //becomes 0xFFFE - OPW( HREG_INT_EN, i | HREG_EV_TICK ); + ifbp->IFB_IntOffCnt--; //becomes 0xFFFE + OPW( HREG_INT_EN, i | HREG_EV_TICK ); OPW( HREG_EV_ACK, HREG_EV_SLEEP_REQ | HREG_EV_TICK | HREG_EV_ACK_REG_READY ); } else #endif // HCF_SLEEP { - OPW( HREG_INT_EN, i | HREG_EV_SLEEP_REQ ); + OPW( HREG_INT_EN, i | HREG_EV_SLEEP_REQ ); } } break; #endif // HCF_INT_ON #if (HCF_SLEEP) & HCF_DDS - case HCF_ACT_SLEEP: // DDS Sleep request + case HCF_ACT_SLEEP: // DDS Sleep request hcf_cntl( ifbp, HCF_CNTL_DISABLE ); cmd_exe( ifbp, HCMD_SLEEP, 0 ); break; -// case HCF_ACT_WAKEUP: // DDS Wakeup request -// HCFASSERT( ifbp->IFB_IntOffCnt == 0xFFFE, ifbp->IFB_IntOffCnt ); -// ifbp->IFB_IntOffCnt++; // restore conventional I/F -// OPW( HREG_IO, HREG_IO_WAKEUP_ASYNC ); -// MSF_WAIT(800); // MSF-defined function to wait n microseconds. -// rc = hcf_action( ifbp, HCF_ACT_INT_OFF ); /*bogus, IFB_IntOffCnt == 0xFFFF, so if you carefully look -// *at the #if HCF_DDS statements, HCF_ACT_INT_OFF is empty -// *for DDS. "Much" better would be to merge the flows for -// *DDS and DEEP_SLEEP -// */ -// break; +// case HCF_ACT_WAKEUP: // DDS Wakeup request +// HCFASSERT( ifbp->IFB_IntOffCnt == 0xFFFE, ifbp->IFB_IntOffCnt ); +// ifbp->IFB_IntOffCnt++; // restore conventional I/F +// OPW( HREG_IO, HREG_IO_WAKEUP_ASYNC ); +// MSF_WAIT(800); // MSF-defined function to wait n microseconds. +// rc = hcf_action( ifbp, HCF_ACT_INT_OFF ); /*bogus, IFB_IntOffCnt == 0xFFFF, so if you carefully look +// *at the #if HCF_DDS statements, HCF_ACT_INT_OFF is empty +// *for DDS. "Much" better would be to merge the flows for +// *DDS and DEEP_SLEEP +// */ +// break; #endif // HCF_DDS #if (HCF_TYPE) & HCF_TYPE_CCX - case HCF_ACT_CCX_ON: // enable CKIP - case HCF_ACT_CCX_OFF: // disable CKIP + case HCF_ACT_CCX_ON: // enable CKIP + case HCF_ACT_CCX_OFF: // disable CKIP ifbp->IFB_CKIPStat = action; break; #endif // HCF_TYPE_CCX - case HCF_ACT_RX_ACK: //Receiver ACK -/*6*/ if ( ifbp->IFB_RxFID ) { + case HCF_ACT_RX_ACK: //Receiver ACK + /*6*/ if ( ifbp->IFB_RxFID ) { DAWA_ACK( HREG_EV_RX ); } ifbp->IFB_RxFID = ifbp->IFB_RxLen = 0; break; -/*8*/ case HCF_ACT_PRS_SCAN: // Hermes PRS Scan (F102) + /*8*/ case HCF_ACT_PRS_SCAN: // Hermes PRS Scan (F102) OPW( HREG_PARAM_1, 0x3FFF ); - //Fall through in HCF_ACT_TALLIES - case HCF_ACT_TALLIES: // Hermes Inquire Tallies (F100) + //Fall through in HCF_ACT_TALLIES + case HCF_ACT_TALLIES: // Hermes Inquire Tallies (F100) #if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0 - case HCF_ACT_SCAN: // Hermes Inquire Scan (F101) + case HCF_ACT_SCAN: // Hermes Inquire Scan (F101) #endif // HCF_TYPE_HII5 /*!! the assumptions about numerical relationships between CFG_TALLIES etc and HCF_ACT_TALLIES etc - * are checked by #if statements just prior to this routine resulting in: err "maintenance" */ + * are checked by #if statements just prior to this routine resulting in: err "maintenance" */ cmd_exe( ifbp, HCMD_INQUIRE, action - HCF_ACT_TALLIES + CFG_TALLIES ); break; - default: + default: HCFASSERT( DO_ASSERT, action ); break; } - //! do not HCFASSERT( rc == HCF_SUCCESS, rc ) /* 30*/ + //! do not HCFASSERT( rc == HCF_SUCCESS, rc ) /* 30*/ HCFLOGEXIT( HCF_TRACE_ACTION ); return rc; } // hcf_action @@ -839,137 +838,137 @@ hcf_16 i; /************************************************************************************************************ -* -*.MODULE int hcf_cntl( IFBP ifbp, hcf_16 cmd ) -*.PURPOSE Connect or disconnect a specific port to a specific network. -*!! ;???????????????? continue needs more explanation -* recovers by means of "continue" when the connect process in CCX mode fails -* Enables or disables data transmission and reception for the NIC. -* Activates static NIC configuration for a specific port at connect. -* Activates static configuration for all ports at enable. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* cmd 0x001F: Hermes command (disable, enable, connect, disconnect, continue) -* HCF_CNTL_ENABLE Enable -* HCF_CNTL_DISABLE Disable -* HCF_CNTL_CONTINUE Continue -* HCF_CNTL_CONNECT Connect -* HCF_CNTL_DISCONNECT Disconnect -* 0x0100: command qualifier (continue) -* HCMD_RETRY retry flag -* 0x0700: port number (connect/disconnect) -* HCF_PORT_0 MAC Port 0 -* HCF_PORT_1 MAC Port 1 -* HCF_PORT_2 MAC Port 2 -* HCF_PORT_3 MAC Port 3 -* HCF_PORT_4 MAC Port 4 -* HCF_PORT_5 MAC Port 5 -* HCF_PORT_6 MAC Port 6 -* -*.RETURNS -* HCF_SUCCESS -*!! via cmd_exe -* HCF_ERR_NO_NIC -* HCF_ERR_DEFUNCT_... -* HCF_ERR_TIME_OUT -* -*.DESCRIPTION -* The parameter cmd contains a number of subfields. -* The actual value for cmd is created by logical or-ing the appropriate mnemonics for the subfields. -* The field 0x001F contains the command code -* - HCF_CNTL_ENABLE -* - HCF_CNTL_DISABLE -* - HCF_CNTL_CONNECT -* - HCF_CNTL_DISCONNECT -* - HCF_CNTL_CONTINUE -* -* For HCF_CNTL_CONTINUE, the field 0x0100 contains the retry flag HCMD_RETRY. -* For HCF_CNTL_CONNECT and HCF_CNTL_DISCONNECT, the field 0x0700 contains the port number as HCF_PORT_#. -* For Station as well as AccessPoint F/W, MAC Port 0 is the "normal" communication channel. -* For AccessPoint F/W, MAC Port 1 through 6 control the WDS links. -* -* Note that despite the names HCF_CNTL_DISABLE and HCF_CNTL_ENABLE, hcf_cntl does not influence the NIC -* Interrupts mode. -* -* The Connect is used by the MSF to bring a particular port in an inactive state as far as data transmission -* and reception are concerned. -* When a particular port is disconnected: -* - the F/W disables the receiver for that port. -* - the F/W ignores send commands for that port. -* - all frames (Receive as well as pending Transmit) for that port on the NIC are discarded. -* -* When the NIC is disabled, above list applies to all ports, i.e. the result is like all ports are -* disconnected. -* -* When a particular port is connected: -* - the F/W effectuates the static configuration for that port. -* - enables the receiver for that port. -* - accepts send commands for that port. -* -* Enabling has the following effects: -* - the F/W effectuates the static configuration for all ports. -* The F/W only updates its static configuration at a transition from disabled to enabled or from -* disconnected to connected. -* In order to enforce the static configuration, the MSF must assure that such a transition takes place. -* Due to such a disable/enable or disconnect/connect sequence, Rx/Tx frames may be lost, in other words, -* configuration may impact communication. -* - The DMA Engine (if applicable) is enabled. -* Note that the Enable Function by itself only enables data transmission and reception, it -* does not enable the Interrupt Generation mechanism. This is done by hcf_action. -* -* Disabling has the following effects: -*!! ;?????is the following statement really true -* - it acts as a disconnect on all ports. -* - The DMA Engine (if applicable) is disabled. -* -* For impact of the disable command on the behavior of hcf_dma_tx/rx_get see the appropriate sections. -* -* Although the Enable/Disable and Connect/Disconnect are antonyms, there is no restriction on their sequencing, -* in other words, they may be called multiple times in arbitrary sequence without being paired or balanced. -* Each time one of these functions is called, the effects of the preceding calls cease. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value. -* - NIC interrupts are not disabled. -* - A command other than Continue, Enable, Disable, Connect or Disconnect is given. -* - An invalid combination of the subfields is given or a bit outside the subfields is given. -* - any return code besides HCF_SUCCESS. -* - reentrancy, may be caused by calling a hcf_function without adequate protection against NIC interrupts or -* multi-threading -* -*.DIAGRAM -* hcf_cntl takes successively the following actions: -*2: If the HCF is in Defunct mode or incompatible with the Primary or Station Supplier in the Hermes, -* hcf_cntl() returns immediately with HCF_ERR_NO_NIC;? as status. -*8: when the port is disabled, the DMA engine needs to be de-activated, so the host can safely reclaim tx -* packets from the tx descriptor chain. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE int hcf_cntl( IFBP ifbp, hcf_16 cmd ) + *.PURPOSE Connect or disconnect a specific port to a specific network. + *!! ;???????????????? continue needs more explanation + * recovers by means of "continue" when the connect process in CCX mode fails + * Enables or disables data transmission and reception for the NIC. + * Activates static NIC configuration for a specific port at connect. + * Activates static configuration for all ports at enable. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * cmd 0x001F: Hermes command (disable, enable, connect, disconnect, continue) + * HCF_CNTL_ENABLE Enable + * HCF_CNTL_DISABLE Disable + * HCF_CNTL_CONTINUE Continue + * HCF_CNTL_CONNECT Connect + * HCF_CNTL_DISCONNECT Disconnect + * 0x0100: command qualifier (continue) + * HCMD_RETRY retry flag + * 0x0700: port number (connect/disconnect) + * HCF_PORT_0 MAC Port 0 + * HCF_PORT_1 MAC Port 1 + * HCF_PORT_2 MAC Port 2 + * HCF_PORT_3 MAC Port 3 + * HCF_PORT_4 MAC Port 4 + * HCF_PORT_5 MAC Port 5 + * HCF_PORT_6 MAC Port 6 + * + *.RETURNS + * HCF_SUCCESS + *!! via cmd_exe + * HCF_ERR_NO_NIC + * HCF_ERR_DEFUNCT_... + * HCF_ERR_TIME_OUT + * + *.DESCRIPTION + * The parameter cmd contains a number of subfields. + * The actual value for cmd is created by logical or-ing the appropriate mnemonics for the subfields. + * The field 0x001F contains the command code + * - HCF_CNTL_ENABLE + * - HCF_CNTL_DISABLE + * - HCF_CNTL_CONNECT + * - HCF_CNTL_DISCONNECT + * - HCF_CNTL_CONTINUE + * + * For HCF_CNTL_CONTINUE, the field 0x0100 contains the retry flag HCMD_RETRY. + * For HCF_CNTL_CONNECT and HCF_CNTL_DISCONNECT, the field 0x0700 contains the port number as HCF_PORT_#. + * For Station as well as AccessPoint F/W, MAC Port 0 is the "normal" communication channel. + * For AccessPoint F/W, MAC Port 1 through 6 control the WDS links. + * + * Note that despite the names HCF_CNTL_DISABLE and HCF_CNTL_ENABLE, hcf_cntl does not influence the NIC + * Interrupts mode. + * + * The Connect is used by the MSF to bring a particular port in an inactive state as far as data transmission + * and reception are concerned. + * When a particular port is disconnected: + * - the F/W disables the receiver for that port. + * - the F/W ignores send commands for that port. + * - all frames (Receive as well as pending Transmit) for that port on the NIC are discarded. + * + * When the NIC is disabled, above list applies to all ports, i.e. the result is like all ports are + * disconnected. + * + * When a particular port is connected: + * - the F/W effectuates the static configuration for that port. + * - enables the receiver for that port. + * - accepts send commands for that port. + * + * Enabling has the following effects: + * - the F/W effectuates the static configuration for all ports. + * The F/W only updates its static configuration at a transition from disabled to enabled or from + * disconnected to connected. + * In order to enforce the static configuration, the MSF must assure that such a transition takes place. + * Due to such a disable/enable or disconnect/connect sequence, Rx/Tx frames may be lost, in other words, + * configuration may impact communication. + * - The DMA Engine (if applicable) is enabled. + * Note that the Enable Function by itself only enables data transmission and reception, it + * does not enable the Interrupt Generation mechanism. This is done by hcf_action. + * + * Disabling has the following effects: + *!! ;?????is the following statement really true + * - it acts as a disconnect on all ports. + * - The DMA Engine (if applicable) is disabled. + * + * For impact of the disable command on the behavior of hcf_dma_tx/rx_get see the appropriate sections. + * + * Although the Enable/Disable and Connect/Disconnect are antonyms, there is no restriction on their sequencing, + * in other words, they may be called multiple times in arbitrary sequence without being paired or balanced. + * Each time one of these functions is called, the effects of the preceding calls cease. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value. + * - NIC interrupts are not disabled. + * - A command other than Continue, Enable, Disable, Connect or Disconnect is given. + * - An invalid combination of the subfields is given or a bit outside the subfields is given. + * - any return code besides HCF_SUCCESS. + * - reentrancy, may be caused by calling a hcf_function without adequate protection against NIC interrupts or + * multi-threading + * + *.DIAGRAM + * hcf_cntl takes successively the following actions: + *2: If the HCF is in Defunct mode or incompatible with the Primary or Station Supplier in the Hermes, + * hcf_cntl() returns immediately with HCF_ERR_NO_NIC;? as status. + *8: when the port is disabled, the DMA engine needs to be de-activated, so the host can safely reclaim tx + * packets from the tx descriptor chain. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int hcf_cntl( IFBP ifbp, hcf_16 cmd ) { -int rc = HCF_ERR_INCOMP_FW; + int rc = HCF_ERR_INCOMP_FW; #if HCF_ASSERT -{ int x = cmd & HCMD_CMD_CODE; - if ( x == HCF_CNTL_CONTINUE ) x &= ~HCMD_RETRY; - else if ( (x == HCMD_DISABLE || x == HCMD_ENABLE) && ifbp->IFB_FWIdentity.comp_id == COMP_ID_FW_AP ) { - x &= ~HFS_TX_CNTL_PORT; - } - HCFASSERT( x==HCF_CNTL_ENABLE || x==HCF_CNTL_DISABLE || HCF_CNTL_CONTINUE || + { int x = cmd & HCMD_CMD_CODE; + if ( x == HCF_CNTL_CONTINUE ) x &= ~HCMD_RETRY; + else if ( (x == HCMD_DISABLE || x == HCMD_ENABLE) && ifbp->IFB_FWIdentity.comp_id == COMP_ID_FW_AP ) { + x &= ~HFS_TX_CNTL_PORT; + } + HCFASSERT( x==HCF_CNTL_ENABLE || x==HCF_CNTL_DISABLE || HCF_CNTL_CONTINUE || x==HCF_CNTL_CONNECT || x==HCF_CNTL_DISCONNECT, cmd ); -} + } #endif // HCF_ASSERT // #if (HCF_SLEEP) & HCF_DDS -// HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFE, cmd ); +// HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFE, cmd ); // #endif // HCF_DDS HCFLOGENTRY( HCF_TRACE_CNTL, cmd ); - if ( ifbp->IFB_CardStat == 0 ) { /*2*/ -/*6*/ rc = cmd_exe( ifbp, cmd, 0 ); + if ( ifbp->IFB_CardStat == 0 ) { /*2*/ + /*6*/ rc = cmd_exe( ifbp, cmd, 0 ); #if (HCF_SLEEP) & HCF_DDS - ifbp->IFB_TickCnt = 0; //start 2 second period (with 1 tick uncertanty) + ifbp->IFB_TickCnt = 0; //start 2 second period (with 1 tick uncertanty) #endif // HCF_DDS } #if HCF_DMA @@ -980,7 +979,7 @@ int rc = HCF_ERR_INCOMP_FW; hcf_io io_port = ifbp->IFB_IOBase; DESC_STRCT *p; if ( cmd == HCF_CNTL_DISABLE || cmd == HCF_CNTL_ENABLE ) { - OUT_PORT_DWORD( (io_port + HREG_DMA_CTRL), DMA_CTRLSTAT_RESET); /*8*/ + OUT_PORT_DWORD( (io_port + HREG_DMA_CTRL), DMA_CTRLSTAT_RESET); /*8*/ ifbp->IFB_CntlOpt &= ~DMA_ENABLED; } if ( cmd == HCF_CNTL_ENABLE ) { @@ -993,7 +992,7 @@ int rc = HCF_ERR_INCOMP_FW; // make the entire rx descriptor chain DMA-owned, so the DMA engine can (re-)use it. p = ifbp->IFB_FirstDesc[DMA_RX]; if (p != NULL) { //;? Think this over again in the light of the new chaining strategy - if ( 1 ) { //begin alternative + if ( 1 ) { //begin alternative HCFASSERT( NT_ASSERT, NEVER_TESTED ); put_frame_lst( ifbp, ifbp->IFB_FirstDesc[DMA_RX], DMA_RX ); if ( ifbp->IFB_FirstDesc[DMA_RX] ) { @@ -1020,140 +1019,140 @@ int rc = HCF_ERR_INCOMP_FW; /************************************************************************************************************ -* -*.MODULE int hcf_connect( IFBP ifbp, hcf_io io_base ) -*.PURPOSE Grants access right for the HCF to the IFB. -* Initializes Card and HCF housekeeping. -* -*.ARGUMENTS -* ifbp (near) address of the Interface Block -* io_base non-USB: I/O Base address of the NIC (connect) -* non-USB: HCF_DISCONNECT -* USB: HCF_CONNECT, HCF_DISCONNECT -* -*.RETURNS -* HCF_SUCCESS -* HCF_ERR_INCOMP_PRI -* HCF_ERR_INCOMP_FW -* HCF_ERR_DEFUNCT_CMD_SEQ -*!! HCF_ERR_NO_NIC really returned ;? -* HCF_ERR_NO_NIC -* HCF_ERR_TIME_OUT -* -* MSF-accessible fields of Result Block: -* IFB_IOBase entry parameter io_base -* IFB_IORange HREG_IO_RANGE (0x40/0x80) -* IFB_Version version of the IFB layout -* IFB_FWIdentity CFG_FW_IDENTITY_STRCT, specifies the identity of the -* "running" F/W, i.e. tertiary F/W under normal conditions -* IFB_FWSup CFG_SUP_RANGE_STRCT, specifies the supplier range of -* the "running" F/W, i.e. tertiary F/W under normal conditions -* IFB_HSISup CFG_SUP_RANGE_STRCT, specifies the HW/SW I/F range of the NIC -* IFB_PRIIdentity CFG_PRI_IDENTITY_STRCT, specifies the Identity of the Primary F/W -* IFB_PRISup CFG_SUP_RANGE_STRCT, specifies the supplier range of the Primary F/W -* all other all MSF accessible fields, which are not specified above, are zero-filled -* -*.CONDITIONS -* It is the responsibility of the MSF to assure the correctness of the I/O Base address. -* -* Note: hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF ) -* was called. -* -*.DESCRIPTION -* hcf_connect passes the MSF-defined location of the IFB to the HCF and grants or revokes access right for the -* HCF to the IFB. Revoking is done by specifying HCF_DISCONNECT rather than an I/O address for the parameter -* io_base. Every call of hcf_connect in "connect" mode, must eventually be followed by a call of hcf_connect -* in "disconnect" mode. Clalling hcf_connect in "connect"/"disconnect" mode can not be nested. -* The IFB address must be used as a handle with all subsequent HCF-function calls and the HCF uses the IFB -* address as a handle when it performs a call(back) of an MSF-function (i.e. msf_assert). -* -* Note that not only the MSF accessible fields are cleared, but also all internal housekeeping -* information is re-initialized. -* This implies that all settings which are done via hcf_action and hcf_put_info (e.g. CFG_MB_ASSERT, CFG_REG_MB, -* CFG_REG_INFO_LOG) must be done again. The only field which is not cleared, is IFB_MSFSup. -* -* If HCF_INT_ON is selected as compile option, NIC interrupts are disabled. -* -* Assert fails if -* - ifbp is not properly aligned ( ref chapter HCF_ALIGN in 4.1.1) -* - I/O Base Address is not a multiple of 0x40 (note: 0x0000 is explicitly allowed). -* -*.DIAGRAM -* -*0: Throughout hcf_connect you need to distinguish the connect from the disconnect case, which requires -* some attention about what to use as "I/O" address when for which purpose. -*2: -*2a: Reset H-II by toggling reset bit in IO-register on and off. -* The HCF_TYPE_PRELOADED caters for the DOS environment where H-II is loaded by a separate program to -* overcome the 64k size limit posed on DOS drivers. -* The macro OPW is not yet useable because the IFB_IOBase field is not set. -* Note 1: hopefully the clearing and initializing of the IFB (see below) acts as a delay which meets the -* specification for S/W reset -* Note 2: it turns out that on some H/W constellations, the clock to access the EEProm is not lowered -* to an appropriate frequency by HREG_IO_SRESET. By giving an HCMD_INI first, this problem is worked around. -*2b: Experimentally it is determined over a wide range of F/W versions that waiting for the for Cmd bit in -* Ev register gives a workable strategy. The available documentation does not give much clues. -*4: clear and initialize the IFB -* The HCF house keeping info is designed such that zero is the appropriate initial value for as much as -* feasible IFB-items. -* The readable fields mentioned in the description section and some HCF specific fields are given their -* actual value. -* IFB_TickIni is initialized at best guess before calibration -* Hcf_connect defaults to "no interrupt generation" (implicitly achieved by the zero-filling). -*6: Register compile-time linked MSF Routine and set default filter level -* cast needed to get around the "near" problem in DOS COM model -* er C2446: no conversion from void (__near __cdecl *)(unsigned char __far *,unsigned int,unsigned short,int) -* to void (__far __cdecl *)(unsigned char __far *,unsigned int,unsigned short,int) -*8: If a command is apparently still active (as indicated by the Busy bit in Cmd register) this may indicate a -* blocked cmd pipe line. To unblock the following actions are done: -* - Ack everything -* - Wait for Busy bit drop in Cmd register -* - Wait for Cmd bit raise in Ev register -* The two waits are combined in a single HCF_WAIT_WHILE to optimize memory size. If either of these waits -* fail (prot_cnt becomes 0), then something is serious wrong. Rather than PANICK, the assumption is that the -* next cmd_exe will fail, causing the HCF to go into DEFUNCT mode -*10: Ack everything to unblock a (possibly blocked) cmd pipe line -* Note 1: it is very likely that an Alloc event is pending and very well possible that a (Send) Cmd event is -* pending on non-initial calls -* Note 2: it is assumed that this strategy takes away the need to ack every conceivable event after an -* Hermes Initialize -*12: Only H-II NEEDS the Hermes Initialize command. Due to the different semantics for H-I and H-II -* Initialize command, init() does not (and can not, since it is called e.g. after a download) execute the -* Hermes Initialize command. Executing the Hermes Initialize command for H-I would not harm but not do -* anything useful either, so it is skipped. -* The return status of cmd_exe is ignored. It is assumed that if cmd_exe fails, init fails too -*14: use io_base as a flag to merge hcf_connect and hcf_disconnect into 1 routine -* the call to init and its subsequent call of cmd_exe will return HCF_ERR_NO_NIC if appropriate. This status -* is (badly) needed by some legacy combination of NT4 and card services which do not yield an I/O address in -* time. -* -*.NOTICE -* On platforms where the NULL-pointer is not a bit-pattern of all zeros, the zero-filling of the IFB results -* in an incorrect initialization of pointers. -* The implementation of the MailBox manipulation in put_mb_info protects against the absence of a MailBox -* based on IFB_MBSize, IFB_MBWp and ifbp->IFB_MBRp. This has ramifications on the initialization of the -* MailBox via hcf_put_info with the CFG_REG_MB type, but it prevents dependency on the "NULL-"ness of -* IFB_MBp. -* -*.NOTICE -* There are a number of problems when asserting and logging hcf_connect, e.g. -* - Asserting on re-entrancy of hcf_connect by means of -* "HCFASSERT( (ifbp->IFB_AssertTrace & HCF_ASSERT_CONNECT) == 0, 0 )" is not useful because IFB contents -* are undefined -* - Asserting before the IFB is cleared will cause mdd_assert() to interpret the garbage in IFB_AssertRtn -* as a routine address -* Therefore HCFTRACE nor HCFLOGENTRY is called by hcf_connect. -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE int hcf_connect( IFBP ifbp, hcf_io io_base ) + *.PURPOSE Grants access right for the HCF to the IFB. + * Initializes Card and HCF housekeeping. + * + *.ARGUMENTS + * ifbp (near) address of the Interface Block + * io_base non-USB: I/O Base address of the NIC (connect) + * non-USB: HCF_DISCONNECT + * USB: HCF_CONNECT, HCF_DISCONNECT + * + *.RETURNS + * HCF_SUCCESS + * HCF_ERR_INCOMP_PRI + * HCF_ERR_INCOMP_FW + * HCF_ERR_DEFUNCT_CMD_SEQ + *!! HCF_ERR_NO_NIC really returned ;? + * HCF_ERR_NO_NIC + * HCF_ERR_TIME_OUT + * + * MSF-accessible fields of Result Block: + * IFB_IOBase entry parameter io_base + * IFB_IORange HREG_IO_RANGE (0x40/0x80) + * IFB_Version version of the IFB layout + * IFB_FWIdentity CFG_FW_IDENTITY_STRCT, specifies the identity of the + * "running" F/W, i.e. tertiary F/W under normal conditions + * IFB_FWSup CFG_SUP_RANGE_STRCT, specifies the supplier range of + * the "running" F/W, i.e. tertiary F/W under normal conditions + * IFB_HSISup CFG_SUP_RANGE_STRCT, specifies the HW/SW I/F range of the NIC + * IFB_PRIIdentity CFG_PRI_IDENTITY_STRCT, specifies the Identity of the Primary F/W + * IFB_PRISup CFG_SUP_RANGE_STRCT, specifies the supplier range of the Primary F/W + * all other all MSF accessible fields, which are not specified above, are zero-filled + * + *.CONDITIONS + * It is the responsibility of the MSF to assure the correctness of the I/O Base address. + * + * Note: hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF ) + * was called. + * + *.DESCRIPTION + * hcf_connect passes the MSF-defined location of the IFB to the HCF and grants or revokes access right for the + * HCF to the IFB. Revoking is done by specifying HCF_DISCONNECT rather than an I/O address for the parameter + * io_base. Every call of hcf_connect in "connect" mode, must eventually be followed by a call of hcf_connect + * in "disconnect" mode. Clalling hcf_connect in "connect"/"disconnect" mode can not be nested. + * The IFB address must be used as a handle with all subsequent HCF-function calls and the HCF uses the IFB + * address as a handle when it performs a call(back) of an MSF-function (i.e. msf_assert). + * + * Note that not only the MSF accessible fields are cleared, but also all internal housekeeping + * information is re-initialized. + * This implies that all settings which are done via hcf_action and hcf_put_info (e.g. CFG_MB_ASSERT, CFG_REG_MB, + * CFG_REG_INFO_LOG) must be done again. The only field which is not cleared, is IFB_MSFSup. + * + * If HCF_INT_ON is selected as compile option, NIC interrupts are disabled. + * + * Assert fails if + * - ifbp is not properly aligned ( ref chapter HCF_ALIGN in 4.1.1) + * - I/O Base Address is not a multiple of 0x40 (note: 0x0000 is explicitly allowed). + * + *.DIAGRAM + * + *0: Throughout hcf_connect you need to distinguish the connect from the disconnect case, which requires + * some attention about what to use as "I/O" address when for which purpose. + *2: + *2a: Reset H-II by toggling reset bit in IO-register on and off. + * The HCF_TYPE_PRELOADED caters for the DOS environment where H-II is loaded by a separate program to + * overcome the 64k size limit posed on DOS drivers. + * The macro OPW is not yet useable because the IFB_IOBase field is not set. + * Note 1: hopefully the clearing and initializing of the IFB (see below) acts as a delay which meets the + * specification for S/W reset + * Note 2: it turns out that on some H/W constellations, the clock to access the EEProm is not lowered + * to an appropriate frequency by HREG_IO_SRESET. By giving an HCMD_INI first, this problem is worked around. + *2b: Experimentally it is determined over a wide range of F/W versions that waiting for the for Cmd bit in + * Ev register gives a workable strategy. The available documentation does not give much clues. + *4: clear and initialize the IFB + * The HCF house keeping info is designed such that zero is the appropriate initial value for as much as + * feasible IFB-items. + * The readable fields mentioned in the description section and some HCF specific fields are given their + * actual value. + * IFB_TickIni is initialized at best guess before calibration + * Hcf_connect defaults to "no interrupt generation" (implicitly achieved by the zero-filling). + *6: Register compile-time linked MSF Routine and set default filter level + * cast needed to get around the "near" problem in DOS COM model + * er C2446: no conversion from void (__near __cdecl *)(unsigned char __far *,unsigned int,unsigned short,int) + * to void (__far __cdecl *)(unsigned char __far *,unsigned int,unsigned short,int) + *8: If a command is apparently still active (as indicated by the Busy bit in Cmd register) this may indicate a + * blocked cmd pipe line. To unblock the following actions are done: + * - Ack everything + * - Wait for Busy bit drop in Cmd register + * - Wait for Cmd bit raise in Ev register + * The two waits are combined in a single HCF_WAIT_WHILE to optimize memory size. If either of these waits + * fail (prot_cnt becomes 0), then something is serious wrong. Rather than PANICK, the assumption is that the + * next cmd_exe will fail, causing the HCF to go into DEFUNCT mode + *10: Ack everything to unblock a (possibly blocked) cmd pipe line + * Note 1: it is very likely that an Alloc event is pending and very well possible that a (Send) Cmd event is + * pending on non-initial calls + * Note 2: it is assumed that this strategy takes away the need to ack every conceivable event after an + * Hermes Initialize + *12: Only H-II NEEDS the Hermes Initialize command. Due to the different semantics for H-I and H-II + * Initialize command, init() does not (and can not, since it is called e.g. after a download) execute the + * Hermes Initialize command. Executing the Hermes Initialize command for H-I would not harm but not do + * anything useful either, so it is skipped. + * The return status of cmd_exe is ignored. It is assumed that if cmd_exe fails, init fails too + *14: use io_base as a flag to merge hcf_connect and hcf_disconnect into 1 routine + * the call to init and its subsequent call of cmd_exe will return HCF_ERR_NO_NIC if appropriate. This status + * is (badly) needed by some legacy combination of NT4 and card services which do not yield an I/O address in + * time. + * + *.NOTICE + * On platforms where the NULL-pointer is not a bit-pattern of all zeros, the zero-filling of the IFB results + * in an incorrect initialization of pointers. + * The implementation of the MailBox manipulation in put_mb_info protects against the absence of a MailBox + * based on IFB_MBSize, IFB_MBWp and ifbp->IFB_MBRp. This has ramifications on the initialization of the + * MailBox via hcf_put_info with the CFG_REG_MB type, but it prevents dependency on the "NULL-"ness of + * IFB_MBp. + * + *.NOTICE + * There are a number of problems when asserting and logging hcf_connect, e.g. + * - Asserting on re-entrancy of hcf_connect by means of + * "HCFASSERT( (ifbp->IFB_AssertTrace & HCF_ASSERT_CONNECT) == 0, 0 )" is not useful because IFB contents + * are undefined + * - Asserting before the IFB is cleared will cause mdd_assert() to interpret the garbage in IFB_AssertRtn + * as a routine address + * Therefore HCFTRACE nor HCFLOGENTRY is called by hcf_connect. + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int hcf_connect( IFBP ifbp, hcf_io io_base ) { -int rc = HCF_SUCCESS; -hcf_io io_addr; -hcf_32 prot_cnt; -hcf_8 *q; -LTV_STRCT x; + int rc = HCF_SUCCESS; + hcf_io io_addr; + hcf_32 prot_cnt; + hcf_8 *q; + LTV_STRCT x; #if HCF_ASSERT hcf_16 xa = ifbp->IFB_FWIdentity.typ; /* is assumed to cause an assert later on if hcf_connect is called without intervening hcf_disconnect. @@ -1163,51 +1162,51 @@ LTV_STRCT x; */ #endif // HCF_ASSERT - if ( io_base == HCF_DISCONNECT ) { //disconnect + if ( io_base == HCF_DISCONNECT ) { //disconnect io_addr = ifbp->IFB_IOBase; - OPW( HREG_INT_EN, 0 ); //;?workaround against dying F/W on subsequent hcf_connect calls - } else { //connect /* 0 */ + OPW( HREG_INT_EN, 0 ); //;?workaround against dying F/W on subsequent hcf_connect calls + } else { //connect /* 0 */ io_addr = io_base; } #if 0 //;? if a subsequent hcf_connect is preceded by an hcf_disconnect the wakeup is not needed !! #if HCF_SLEEP - OUT_PORT_WORD( .....+HREG_IO, HREG_IO_WAKEUP_ASYNC ); //OPW not yet useable - MSF_WAIT(800); // MSF-defined function to wait n microseconds. + OUT_PORT_WORD( .....+HREG_IO, HREG_IO_WAKEUP_ASYNC ); //OPW not yet useable + MSF_WAIT(800); // MSF-defined function to wait n microseconds. note that MSF_WAIT uses not yet defined!!!! IFB_IOBase and IFB_TickIni (via PROT_CNT_INI) so be careful if this code is restored #endif // HCF_SLEEP #endif // 0 -#if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 //switch clock back for SEEPROM access !!! - OUT_PORT_WORD( io_addr + HREG_CMD, HCMD_INI ); //OPW not yet useable +#if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 //switch clock back for SEEPROM access !!! + OUT_PORT_WORD( io_addr + HREG_CMD, HCMD_INI ); //OPW not yet useable prot_cnt = INI_TICK_INI; HCF_WAIT_WHILE( (IN_PORT_WORD( io_addr + HREG_EV_STAT) & HREG_EV_CMD) == 0 ); - OUT_PORT_WORD( (io_addr + HREG_IO), HREG_IO_SRESET ); //OPW not yet useable /* 2a*/ + OUT_PORT_WORD( (io_addr + HREG_IO), HREG_IO_SRESET ); //OPW not yet useable /* 2a*/ #endif // HCF_TYPE_PRELOADED - for ( q = (hcf_8*)(&ifbp->IFB_Magic); q > (hcf_8*)ifbp; *--q = 0 ) /*NOP*/; /* 4 */ - ifbp->IFB_Magic = HCF_MAGIC; - ifbp->IFB_Version = IFB_VERSION; + for ( q = (hcf_8*)(&ifbp->IFB_Magic); q > (hcf_8*)ifbp; *--q = 0 ) /*NOP*/; /* 4 */ + ifbp->IFB_Magic = HCF_MAGIC; + ifbp->IFB_Version = IFB_VERSION; #if defined MSF_COMPONENT_ID //a new IFB demonstrates how dirty the solution is - xxxx[xxxx_PRI_IDENTITY_OFFSET] = NULL; //IFB_PRIIdentity placeholder 0xFD02 - xxxx[xxxx_PRI_IDENTITY_OFFSET+1] = NULL; //IFB_PRISup placeholder 0xFD03 + xxxx[xxxx_PRI_IDENTITY_OFFSET] = NULL; //IFB_PRIIdentity placeholder 0xFD02 + xxxx[xxxx_PRI_IDENTITY_OFFSET+1] = NULL; //IFB_PRISup placeholder 0xFD03 #endif // MSF_COMPONENT_ID #if (HCF_TALLIES) & ( HCF_TALLIES_NIC | HCF_TALLIES_HCF ) - ifbp->IFB_TallyLen = 1 + 2 * (HCF_NIC_TAL_CNT + HCF_HCF_TAL_CNT); //convert # of Tallies to L value for LTV - ifbp->IFB_TallyTyp = CFG_TALLIES; //IFB_TallyTyp: set T value + ifbp->IFB_TallyLen = 1 + 2 * (HCF_NIC_TAL_CNT + HCF_HCF_TAL_CNT); //convert # of Tallies to L value for LTV + ifbp->IFB_TallyTyp = CFG_TALLIES; //IFB_TallyTyp: set T value #endif // HCF_TALLIES_NIC / HCF_TALLIES_HCF - ifbp->IFB_IOBase = io_addr; //set IO_Base asap, so asserts via HREG_SW_2 don't harm - ifbp->IFB_IORange = HREG_IO_RANGE; - ifbp->IFB_CntlOpt = USE_16BIT; + ifbp->IFB_IOBase = io_addr; //set IO_Base asap, so asserts via HREG_SW_2 don't harm + ifbp->IFB_IORange = HREG_IO_RANGE; + ifbp->IFB_CntlOpt = USE_16BIT; #if HCF_ASSERT assert_ifbp = ifbp; ifbp->IFB_AssertLvl = 1; #if (HCF_ASSERT) & HCF_ASSERT_LNK_MSF_RTN if ( io_base != HCF_DISCONNECT ) { - ifbp->IFB_AssertRtn = (MSF_ASSERT_RTNP)msf_assert; /* 6 */ + ifbp->IFB_AssertRtn = (MSF_ASSERT_RTNP)msf_assert; /* 6 */ } #endif // HCF_ASSERT_LNK_MSF_RTN -#if (HCF_ASSERT) & HCF_ASSERT_MB //build the structure to pass the assert info to hcf_put_info +#if (HCF_ASSERT) & HCF_ASSERT_MB //build the structure to pass the assert info to hcf_put_info ifbp->IFB_AssertStrct.len = sizeof(ifbp->IFB_AssertStrct)/sizeof(hcf_16) - 1; ifbp->IFB_AssertStrct.typ = CFG_MB_INFO; ifbp->IFB_AssertStrct.base_typ = CFG_MB_ASSERT; @@ -1220,31 +1219,31 @@ LTV_STRCT x; IF_PROT_TIME( prot_cnt = ifbp->IFB_TickIni = INI_TICK_INI ); #if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 //!! No asserts before Reset-bit in HREG_IO is cleared - OPW( HREG_IO, 0x0000 ); //OPW useable /* 2b*/ + OPW( HREG_IO, 0x0000 ); //OPW useable /* 2b*/ HCF_WAIT_WHILE( (IPW( HREG_EV_STAT) & HREG_EV_CMD) == 0 ); IF_PROT_TIME( HCFASSERT( prot_cnt, IPW( HREG_EV_STAT) ) ); IF_PROT_TIME( if ( prot_cnt ) prot_cnt = ifbp->IFB_TickIni ); #endif // HCF_TYPE_PRELOADED //!! No asserts before Reset-bit in HREG_IO is cleared - HCFASSERT( DO_ASSERT, MERGE_2( HCF_ASSERT, 0xCAF0 ) ); //just to proof that the complete assert machinery is working - HCFASSERT( xa != CFG_FW_IDENTITY, 0 ); // assert if hcf_connect is called without intervening hcf_disconnect. + HCFASSERT( DO_ASSERT, MERGE_2( HCF_ASSERT, 0xCAF0 ) ); //just to proof that the complete assert machinery is working + HCFASSERT( xa != CFG_FW_IDENTITY, 0 ); // assert if hcf_connect is called without intervening hcf_disconnect. HCFASSERT( ((hcf_32)(void*)ifbp & (HCF_ALIGN-1) ) == 0, (hcf_32)(void*)ifbp ); HCFASSERT( (io_addr & 0x003F) == 0, io_addr ); - //if Busy bit in Cmd register - if (IPW( HREG_CMD ) & HCMD_BUSY ) { /* 8 */ - //. Ack all to unblock a (possibly) blocked cmd pipe line + //if Busy bit in Cmd register + if (IPW( HREG_CMD ) & HCMD_BUSY ) { /* 8 */ + //. Ack all to unblock a (possibly) blocked cmd pipe line OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); - //. Wait for Busy bit drop in Cmd register - //. Wait for Cmd bit raise in Ev register + //. Wait for Busy bit drop in Cmd register + //. Wait for Cmd bit raise in Ev register HCF_WAIT_WHILE( ( IPW( HREG_CMD ) & HCMD_BUSY ) && (IPW( HREG_EV_STAT) & HREG_EV_CMD) == 0 ); IF_PROT_TIME( HCFASSERT( prot_cnt, IPW( HREG_EV_STAT) ) ); /* if prot_cnt == 0, cmd_exe will fail, causing DEFUNCT */ } OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); -#if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 /*12*/ +#if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 /*12*/ (void)cmd_exe( ifbp, HCMD_INI, 0 ); #endif // HCF_TYPE_PRELOADED -if ( io_base != HCF_DISCONNECT ) { - rc = init( ifbp ); /*14*/ + if ( io_base != HCF_DISCONNECT ) { + rc = init( ifbp ); /*14*/ if ( rc == HCF_SUCCESS ) { x.len = 2; x.typ = CFG_NIC_BUS_TYPE; @@ -1253,10 +1252,10 @@ if ( io_base != HCF_DISCONNECT ) { //CFG_NIC_BUS_TYPE not supported -> default 32 bits/DMA, MSF has to overrule via CFG_CNTL_OPT if ( x.len == 0 || x.val[0] == 0x0002 || x.val[0] == 0x0003 ) { #if (HCF_IO) & HCF_IO_32BITS - ifbp->IFB_CntlOpt &= ~USE_16BIT; //reset USE_16BIT + ifbp->IFB_CntlOpt &= ~USE_16BIT; //reset USE_16BIT #endif // HCF_IO_32BITS #if HCF_DMA - ifbp->IFB_CntlOpt |= USE_DMA; //SET DMA + ifbp->IFB_CntlOpt |= USE_DMA; //SET DMA #else ifbp->IFB_IORange = 0x40 /*i.s.o. HREG_IO_RANGE*/; #endif // HCF_DMA @@ -1264,147 +1263,147 @@ if ( io_base != HCF_DISCONNECT ) { } } else HCFASSERT( ( ifbp->IFB_Magic ^= HCF_MAGIC ) == 0, ifbp->IFB_Magic ) /*NOP*/; /* of above HCFASSERT only the side effect is needed, NOP in case HCFASSERT is dummy */ - ifbp->IFB_IOBase = io_base; /* 0*/ + ifbp->IFB_IOBase = io_base; /* 0*/ return rc; } // hcf_connect #if HCF_DMA /************************************************************************************************************ -* Function get_frame_lst -* - resolve the "last host-owned descriptor" problems when a descriptor list is reclaimed by the MSF. -* -* The FrameList to be reclaimed as well as the DescriptorList always start in IFB_FirstDesc[tx_rx_flag] -* and this is always the "current" DELWA Descriptor. -* -* If a FrameList is available, the last descriptor of the FrameList to turned into a new DELWA Descriptor: -* - a copy is made from the information in the last descriptor of the FrameList into the current -* DELWA Descriptor -* - the remainder of the DescriptorList is detached from the copy by setting the next_desc_addr at NULL -* - the DMA control bits of the copy are cleared to do not confuse the MSF -* - the copy of the last descriptor (i.e. the "old" DELWA Descriptor) is chained to the prev Descriptor -* of the FrameList, thus replacing the original last Descriptor of the FrameList. -* - IFB_FirstDesc is changed to the address of that replaced (original) last descriptor of the FrameList, -* i.e. the "new" DELWA Descriptor. -* -* This function makes a copy of that last host-owned descriptor, so the MSF will get a copy of the descriptor. -* On top of that, it adjusts DMA related fields in the IFB structure. - // perform a copying-scheme to circumvent the 'last host owned descriptor cannot be reclaimed' limitation imposed by H2.5's DMA hardware design - // a 'reclaim descriptor' should be available in the HCF: -* -* Returns: address of the first descriptor of the FrameList -* + * Function get_frame_lst + * - resolve the "last host-owned descriptor" problems when a descriptor list is reclaimed by the MSF. + * + * The FrameList to be reclaimed as well as the DescriptorList always start in IFB_FirstDesc[tx_rx_flag] + * and this is always the "current" DELWA Descriptor. + * + * If a FrameList is available, the last descriptor of the FrameList to turned into a new DELWA Descriptor: + * - a copy is made from the information in the last descriptor of the FrameList into the current + * DELWA Descriptor + * - the remainder of the DescriptorList is detached from the copy by setting the next_desc_addr at NULL + * - the DMA control bits of the copy are cleared to do not confuse the MSF + * - the copy of the last descriptor (i.e. the "old" DELWA Descriptor) is chained to the prev Descriptor + * of the FrameList, thus replacing the original last Descriptor of the FrameList. + * - IFB_FirstDesc is changed to the address of that replaced (original) last descriptor of the FrameList, + * i.e. the "new" DELWA Descriptor. + * + * This function makes a copy of that last host-owned descriptor, so the MSF will get a copy of the descriptor. + * On top of that, it adjusts DMA related fields in the IFB structure. + // perform a copying-scheme to circumvent the 'last host owned descriptor cannot be reclaimed' limitation imposed by H2.5's DMA hardware design + // a 'reclaim descriptor' should be available in the HCF: + * + * Returns: address of the first descriptor of the FrameList + * 8: Be careful once you start re-ordering the steps in the copy process, that it still works for cases -* of FrameLists of 1, 2 and more than 2 descriptors -* -* Input parameters: -* tx_rx_flag : specifies 'transmit' or 'receive' descriptor. -* -************************************************************************************************************/ + * of FrameLists of 1, 2 and more than 2 descriptors + * + * Input parameters: + * tx_rx_flag : specifies 'transmit' or 'receive' descriptor. + * + ************************************************************************************************************/ HCF_STATIC DESC_STRCT* get_frame_lst( IFBP ifbp, int tx_rx_flag ) { -DESC_STRCT *head = ifbp->IFB_FirstDesc[tx_rx_flag]; -DESC_STRCT *copy, *p, *prev; + DESC_STRCT *head = ifbp->IFB_FirstDesc[tx_rx_flag]; + DESC_STRCT *copy, *p, *prev; HCFASSERT( tx_rx_flag == DMA_RX || tx_rx_flag == DMA_TX, tx_rx_flag ); - //if FrameList + //if FrameList if ( head ) { - //. search for last descriptor of first FrameList + //. search for last descriptor of first FrameList p = prev = head; while ( ( p->BUF_SIZE & DESC_EOP ) == 0 && p->next_desc_addr ) { - if ( ( ifbp->IFB_CntlOpt & DMA_ENABLED ) == 0 ) { //clear control bits when disabled + if ( ( ifbp->IFB_CntlOpt & DMA_ENABLED ) == 0 ) { //clear control bits when disabled p->BUF_CNT &= DESC_CNT_MASK; } prev = p; p = p->next_desc_addr; } - //. if DMA enabled + //. if DMA enabled if ( ifbp->IFB_CntlOpt & DMA_ENABLED ) { - //. . if last descriptor of FrameList is DMA owned - //. . or if FrameList is single (DELWA) Descriptor + //. . if last descriptor of FrameList is DMA owned + //. . or if FrameList is single (DELWA) Descriptor if ( p->BUF_CNT & DESC_DMA_OWNED || head->next_desc_addr == NULL ) { - //. . . refuse to return FrameList to caller + //. . . refuse to return FrameList to caller head = NULL; } } } - //if returnable FrameList found + //if returnable FrameList found if ( head ) { - //. if FrameList is single (DELWA) Descriptor (implies DMA disabled) - if ( head->next_desc_addr == NULL ) { - //. . clear DescriptorList + //. if FrameList is single (DELWA) Descriptor (implies DMA disabled) + if ( head->next_desc_addr == NULL ) { + //. . clear DescriptorList /*;?ifbp->IFB_LastDesc[tx_rx_flag] =*/ ifbp->IFB_FirstDesc[tx_rx_flag] = NULL; - //. else + //. else } else { - //. . strip hardware-related bits from last descriptor - //. . remove DELWA Descriptor from head of DescriptorList + //. . strip hardware-related bits from last descriptor + //. . remove DELWA Descriptor from head of DescriptorList copy = head; - head = head->next_desc_addr; - //. . exchange first (Confined) and last (possibly imprisoned) Descriptor + head = head->next_desc_addr; + //. . exchange first (Confined) and last (possibly imprisoned) Descriptor copy->buf_phys_addr = p->buf_phys_addr; copy->buf_addr = p->buf_addr; - copy->BUF_SIZE = p->BUF_SIZE &= DESC_CNT_MASK; //get rid of DESC_EOP and possibly DESC_SOP - copy->BUF_CNT = p->BUF_CNT &= DESC_CNT_MASK; //get rid of DESC_DMA_OWNED + copy->BUF_SIZE = p->BUF_SIZE &= DESC_CNT_MASK; //get rid of DESC_EOP and possibly DESC_SOP + copy->BUF_CNT = p->BUF_CNT &= DESC_CNT_MASK; //get rid of DESC_DMA_OWNED #if (HCF_EXT) & HCF_DESC_STRCT_EXT copy->DESC_MSFSup = p->DESC_MSFSup; #endif // HCF_DESC_STRCT_EXT - //. . turn into a DELWA Descriptor + //. . turn into a DELWA Descriptor p->buf_addr = NULL; - //. . chain copy to prev /* 8*/ + //. . chain copy to prev /* 8*/ prev->next_desc_addr = copy; - //. . detach remainder of the DescriptorList from FrameList + //. . detach remainder of the DescriptorList from FrameList copy->next_desc_addr = NULL; copy->next_desc_phys_addr = 0xDEAD0000; //! just to be nice, not really needed - //. . save the new start (i.e. DELWA Descriptor) in IFB_FirstDesc + //. . save the new start (i.e. DELWA Descriptor) in IFB_FirstDesc ifbp->IFB_FirstDesc[tx_rx_flag] = p; } - //. strip DESC_SOP from first descriptor + //. strip DESC_SOP from first descriptor head->BUF_SIZE &= DESC_CNT_MASK; //head->BUF_CNT &= DESC_CNT_MASK; get rid of DESC_DMA_OWNED head->next_desc_phys_addr = 0xDEAD0000; //! just to be nice, not really needed } - //return the just detached FrameList (if any) + //return the just detached FrameList (if any) return head; } // get_frame_lst /************************************************************************************************************ -* Function put_frame_lst -* -* This function -* -* Returns: address of the first descriptor of the FrameList -* -* Input parameters: -* tx_rx_flag : specifies 'transmit' or 'receive' descriptor. -* -* The following list should be kept in sync with hcf_dma_tx/rx_put, in order to get them in the WCI-spec !!!! -* Assert fails if -* - DMA is not enabled -* - descriptor list is NULL -* - a descriptor in the descriptor list is not double word aligned -* - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. -* - the DELWA descriptor is not a "singleton" DescriptorList. -* - the DELWA descriptor is not the first Descriptor supplied -* - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied -* - Possibly more checks could be added !!!!!!!!!!!!! - -*.NOTICE -* The asserts marked with *sc* are really sanity checks for the HCF, they can (supposedly) not be influenced -* by incorrect MSF behavior - - // The MSF is required to supply the HCF with a single descriptor for MSF tx reclaim purposes. - // This 'reclaim descriptor' can be recognized by the fact that its buf_addr field is zero. - ********************************************************************************************* - * Although not required from a hardware perspective: - * - make each descriptor in this rx-chain DMA-owned. - * - Also set the count to zero. EOP and SOP bits are also cleared. - *********************************************************************************************/ + * Function put_frame_lst + * + * This function + * + * Returns: address of the first descriptor of the FrameList + * + * Input parameters: + * tx_rx_flag : specifies 'transmit' or 'receive' descriptor. + * + * The following list should be kept in sync with hcf_dma_tx/rx_put, in order to get them in the WCI-spec !!!! + * Assert fails if + * - DMA is not enabled + * - descriptor list is NULL + * - a descriptor in the descriptor list is not double word aligned + * - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. + * - the DELWA descriptor is not a "singleton" DescriptorList. + * - the DELWA descriptor is not the first Descriptor supplied + * - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied + * - Possibly more checks could be added !!!!!!!!!!!!! + + *.NOTICE + * The asserts marked with *sc* are really sanity checks for the HCF, they can (supposedly) not be influenced + * by incorrect MSF behavior + + // The MSF is required to supply the HCF with a single descriptor for MSF tx reclaim purposes. + // This 'reclaim descriptor' can be recognized by the fact that its buf_addr field is zero. + ********************************************************************************************* + * Although not required from a hardware perspective: + * - make each descriptor in this rx-chain DMA-owned. + * - Also set the count to zero. EOP and SOP bits are also cleared. + *********************************************************************************************/ HCF_STATIC void put_frame_lst( IFBP ifbp, DESC_STRCT *descp, int tx_rx_flag ) { - DESC_STRCT *p = descp; + DESC_STRCT *p = descp; hcf_16 port; HCFASSERT( ifbp->IFB_CntlOpt & USE_DMA, ifbp->IFB_CntlOpt); //only hcf_dma_tx_put must also be DMA_ENABLED @@ -1415,37 +1414,37 @@ put_frame_lst( IFBP ifbp, DESC_STRCT *descp, int tx_rx_flag ) HCFASSERT( ((hcf_32)p & 3 ) == 0, (hcf_32)p ); HCFASSERT( (p->BUF_CNT & ~DESC_CNT_MASK) == 0, p->BUF_CNT ); HCFASSERT( (p->BUF_SIZE & ~DESC_CNT_MASK) == 0, p->BUF_SIZE ); - p->BUF_SIZE &= DESC_CNT_MASK; //!!this SHOULD be superfluous in case of correct MSF - p->BUF_CNT &= tx_rx_flag == DMA_RX ? 0 : DESC_CNT_MASK; //!!this SHOULD be superfluous in case of correct MSF + p->BUF_SIZE &= DESC_CNT_MASK; //!!this SHOULD be superfluous in case of correct MSF + p->BUF_CNT &= tx_rx_flag == DMA_RX ? 0 : DESC_CNT_MASK; //!!this SHOULD be superfluous in case of correct MSF p->BUF_CNT |= DESC_DMA_OWNED; if ( p->next_desc_addr ) { // HCFASSERT( p->buf_addr && p->buf_phys_addr && p->BUF_SIZE && +/- p->BUF_SIZE, ... ); HCFASSERT( p->next_desc_addr->desc_phys_addr, (hcf_32)p->next_desc_addr ); p->next_desc_phys_addr = p->next_desc_addr->desc_phys_addr; - } else { // + } else { // p->next_desc_phys_addr = 0; - if ( p->buf_addr == NULL ) { // DELWA Descriptor - HCFASSERT( descp == p, (hcf_32)descp ); //singleton DescriptorList + if ( p->buf_addr == NULL ) { // DELWA Descriptor + HCFASSERT( descp == p, (hcf_32)descp ); //singleton DescriptorList HCFASSERT( ifbp->IFB_FirstDesc[tx_rx_flag] == NULL, (hcf_32)ifbp->IFB_FirstDesc[tx_rx_flag]); HCFASSERT( ifbp->IFB_LastDesc[tx_rx_flag] == NULL, (hcf_32)ifbp->IFB_LastDesc[tx_rx_flag]); descp->BUF_CNT = 0; //&= ~DESC_DMA_OWNED; ifbp->IFB_FirstDesc[tx_rx_flag] = descp; // part of alternative ifbp->IFB_LastDesc[tx_rx_flag] = ifbp->IFB_FirstDesc[tx_rx_flag] = descp; - // if "recycling" a FrameList - // (e.g. called from hcf_cntl( HCF_CNTL_ENABLE ) - // . prepare for activation DMA controller + // if "recycling" a FrameList + // (e.g. called from hcf_cntl( HCF_CNTL_ENABLE ) + // . prepare for activation DMA controller // part of alternative descp = descp->next_desc_addr; - } else { //a "real" FrameList, hand it over to the DMA engine + } else { //a "real" FrameList, hand it over to the DMA engine HCFASSERT( ifbp->IFB_FirstDesc[tx_rx_flag], (hcf_32)descp ); HCFASSERT( ifbp->IFB_LastDesc[tx_rx_flag], (hcf_32)descp ); HCFASSERT( ifbp->IFB_LastDesc[tx_rx_flag]->next_desc_addr == NULL, - (hcf_32)ifbp->IFB_LastDesc[tx_rx_flag]->next_desc_addr); + (hcf_32)ifbp->IFB_LastDesc[tx_rx_flag]->next_desc_addr); // p->buf_cntl.cntl_stat |= DESC_DMA_OWNED; ifbp->IFB_LastDesc[tx_rx_flag]->next_desc_addr = descp; ifbp->IFB_LastDesc[tx_rx_flag]->next_desc_phys_addr = descp->desc_phys_addr; port = HREG_RXDMA_PTR32; if ( tx_rx_flag ) { - p->BUF_SIZE |= DESC_EOP; // p points at the last descriptor in the caller-supplied descriptor chain + p->BUF_SIZE |= DESC_EOP; // p points at the last descriptor in the caller-supplied descriptor chain descp->BUF_SIZE |= DESC_SOP; port = HREG_TXDMA_PTR32; } @@ -1459,87 +1458,87 @@ put_frame_lst( IFBP ifbp, DESC_STRCT *descp, int tx_rx_flag ) /************************************************************************************************************ -* -*.MODULE DESC_STRCT* hcf_dma_rx_get( IFBP ifbp ) -*.PURPOSE decapsulate a message and provides that message to the MSF. -* reclaim all descriptors in the rx descriptor chain. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* pointer to a FrameList -* -*.DESCRIPTION -* hcf_dma_rx_get is intended to return a received frame when such a frame is deposited in Host memory by the -* DMA engine. In addition hcf_dma_rx_get can be used to reclaim all descriptors in the rx descriptor chain -* when the DMA Engine is disabled, e.g. as part of a driver unloading strategy. -* hcf_dma_rx_get must be called repeatedly by the MSF when hcf_service_nic signals availability of a rx frame -* through the HREG_EV_RDMAD flag of IFB_DmaPackets. The calling must stop when a NULL pointer is returned, at -* which time the HREG_EV_RDMAD flag is also cleared by the HCF to arm the mechanism for the next frame -* reception. -* Regardless whether the DMA Engine is currently enabled (as controlled via hcf_cntl), if the DMA controller -* deposited an Rx-frame in the Rx-DescriptorList, this frame is detached from the Rx-DescriptorList, -* transformed into a FrameList (i.e. updating the housekeeping fields in the descriptors) and returned to the -* caller. -* If no such Rx-frame is available in the Rx-DescriptorList, the behavior of hcf_dma_rx_get depends on the -* status of the DMA Engine. -* If the DMA Engine is enabled, a NULL pointer is returned. -* If the DMA Engine is disabled, the following strategy is used: -* - the complete Rx-DescriptorList is returned. The DELWA Descriptor is not part of the Rx-DescriptorList. -* - If there is no Rx-DescriptorList, the DELWA Descriptor is returned. -* - If there is no DELWA Descriptor, a NULL pointer is returned. -* -* If the MSF performs an disable/enable sequence without exhausting the Rx-DescriptorList as described above, -* the enable command will reset all house keeping information, i.e. already received but not yet by the MSF -* retrieved frames are lost and the next frame will be received starting with the oldest descriptor. -* -* The HCF can be used in 2 fashions: with and without decapsulation for data transfer. -* This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. -* If appropriate, decapsulation is done by moving some data inside the buffers and updating the descriptors -* accordingly. -*!! ;?????where did I describe why a simple manipulation with the count values does not suffice? -* -*.DIAGRAM -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE DESC_STRCT* hcf_dma_rx_get( IFBP ifbp ) + *.PURPOSE decapsulate a message and provides that message to the MSF. + * reclaim all descriptors in the rx descriptor chain. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * pointer to a FrameList + * + *.DESCRIPTION + * hcf_dma_rx_get is intended to return a received frame when such a frame is deposited in Host memory by the + * DMA engine. In addition hcf_dma_rx_get can be used to reclaim all descriptors in the rx descriptor chain + * when the DMA Engine is disabled, e.g. as part of a driver unloading strategy. + * hcf_dma_rx_get must be called repeatedly by the MSF when hcf_service_nic signals availability of a rx frame + * through the HREG_EV_RDMAD flag of IFB_DmaPackets. The calling must stop when a NULL pointer is returned, at + * which time the HREG_EV_RDMAD flag is also cleared by the HCF to arm the mechanism for the next frame + * reception. + * Regardless whether the DMA Engine is currently enabled (as controlled via hcf_cntl), if the DMA controller + * deposited an Rx-frame in the Rx-DescriptorList, this frame is detached from the Rx-DescriptorList, + * transformed into a FrameList (i.e. updating the housekeeping fields in the descriptors) and returned to the + * caller. + * If no such Rx-frame is available in the Rx-DescriptorList, the behavior of hcf_dma_rx_get depends on the + * status of the DMA Engine. + * If the DMA Engine is enabled, a NULL pointer is returned. + * If the DMA Engine is disabled, the following strategy is used: + * - the complete Rx-DescriptorList is returned. The DELWA Descriptor is not part of the Rx-DescriptorList. + * - If there is no Rx-DescriptorList, the DELWA Descriptor is returned. + * - If there is no DELWA Descriptor, a NULL pointer is returned. + * + * If the MSF performs an disable/enable sequence without exhausting the Rx-DescriptorList as described above, + * the enable command will reset all house keeping information, i.e. already received but not yet by the MSF + * retrieved frames are lost and the next frame will be received starting with the oldest descriptor. + * + * The HCF can be used in 2 fashions: with and without decapsulation for data transfer. + * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. + * If appropriate, decapsulation is done by moving some data inside the buffers and updating the descriptors + * accordingly. + *!! ;?????where did I describe why a simple manipulation with the count values does not suffice? + * + *.DIAGRAM + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ DESC_STRCT* hcf_dma_rx_get (IFBP ifbp) { -DESC_STRCT *descp; // pointer to start of FrameList + DESC_STRCT *descp; // pointer to start of FrameList descp = get_frame_lst( ifbp, DMA_RX ); if ( descp && descp->buf_addr ) //!be aware of the missing curly bracket - //skip decapsulation at confined descriptor + //skip decapsulation at confined descriptor #if (HCF_ENCAP) == HCF_ENC #if (HCF_TYPE) & HCF_TYPE_CCX - if ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) + if ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) #endif // HCF_TYPE_CCX - { -int i; -DESC_STRCT *p = descp->next_desc_addr; //pointer to 2nd descriptor of frame - HCFASSERT(p, 0); - // The 2nd descriptor contains (maybe) a SNAP header plus part or whole of the payload. - //determine decapsulation sub-flag in RxFS - i = *(wci_recordp)&descp->buf_addr[HFS_STAT] & ( HFS_STAT_MSG_TYPE | HFS_STAT_ERR ); - if ( i == HFS_STAT_TUNNEL || - ( i == HFS_STAT_1042 && hcf_encap( (wci_bufp)&p->buf_addr[HCF_DASA_SIZE] ) != ENC_TUNNEL )) { - // The 2nd descriptor contains a SNAP header plus part or whole of the payload. - HCFASSERT( p->BUF_CNT == (p->buf_addr[5] + (p->buf_addr[4]<<8) + 2*6 + 2 - 8), p->BUF_CNT ); - // perform decapsulation - HCFASSERT(p->BUF_SIZE >=8, p->BUF_SIZE); - // move SA[2:5] in the second buffer to replace part of the SNAP header - for ( i=3; i >= 0; i--) p->buf_addr[i+8] = p->buf_addr[i]; - // copy DA[0:5], SA[0:1] from first buffer to second buffer - for ( i=0; i<8; i++) p->buf_addr[i] = descp->buf_addr[HFS_ADDR_DEST + i]; - // make first buffer shorter in count - descp->BUF_CNT = HFS_ADDR_DEST; + { + int i; + DESC_STRCT *p = descp->next_desc_addr; //pointer to 2nd descriptor of frame + HCFASSERT(p, 0); + // The 2nd descriptor contains (maybe) a SNAP header plus part or whole of the payload. + //determine decapsulation sub-flag in RxFS + i = *(wci_recordp)&descp->buf_addr[HFS_STAT] & ( HFS_STAT_MSG_TYPE | HFS_STAT_ERR ); + if ( i == HFS_STAT_TUNNEL || + ( i == HFS_STAT_1042 && hcf_encap( (wci_bufp)&p->buf_addr[HCF_DASA_SIZE] ) != ENC_TUNNEL )) { + // The 2nd descriptor contains a SNAP header plus part or whole of the payload. + HCFASSERT( p->BUF_CNT == (p->buf_addr[5] + (p->buf_addr[4]<<8) + 2*6 + 2 - 8), p->BUF_CNT ); + // perform decapsulation + HCFASSERT(p->BUF_SIZE >=8, p->BUF_SIZE); + // move SA[2:5] in the second buffer to replace part of the SNAP header + for ( i=3; i >= 0; i--) p->buf_addr[i+8] = p->buf_addr[i]; + // copy DA[0:5], SA[0:1] from first buffer to second buffer + for ( i=0; i<8; i++) p->buf_addr[i] = descp->buf_addr[HFS_ADDR_DEST + i]; + // make first buffer shorter in count + descp->BUF_CNT = HFS_ADDR_DEST; + } } - } #endif // HCF_ENC if ( descp == NULL ) ifbp->IFB_DmaPackets &= (hcf_16)~HREG_EV_RDMAD; //;?could be integrated into get_frame_lst HCFLOGEXIT( HCF_TRACE_DMA_RX_GET ); @@ -1548,50 +1547,50 @@ DESC_STRCT *p = descp->next_desc_addr; //pointer to 2nd descriptor of frame /************************************************************************************************************ -* -*.MODULE void hcf_dma_rx_put( IFBP ifbp, DESC_STRCT *descp ) -*.PURPOSE supply buffers for receive purposes. -* supply the Rx-DELWA descriptor. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* descp address of a DescriptorList -* -*.RETURNS N.A. -* -*.DESCRIPTION -* This function is called by the MSF to supply the HCF with new/more buffers for receive purposes. -* The HCF can be used in 2 fashions: with and without encapsulation for data transfer. -* This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. -* As a consequence, some additional constraints apply to the number of descriptor and the buffers associated -* with the first 2 descriptors. Independent of the encapsulation feature, the COUNT fields are ignored. -* A special case is the supplying of the DELWA descriptor, which must be supplied as the first descriptor. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value. -* - NIC interrupts are not disabled while required by parameter action. -* - in case decapsulation by the HCF is selected: -* - The first databuffer does not have the exact size corresponding with the RxFS up to the 802.3 DestAddr -* field (== 29 words). -* - The FrameList does not consists of at least 2 Descriptors. -* - The second databuffer does not have the minimum size of 8 bytes. -*!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get -*!! them in the WCI-spec !!!! -* - DMA is not enabled -* - descriptor list is NULL -* - a descriptor in the descriptor list is not double word aligned -* - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. -* - the DELWA descriptor is not a "singleton" DescriptorList. -* - the DELWA descriptor is not the first Descriptor supplied -* - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied -*!! - Possibly more checks could be added !!!!!!!!!!!!! -* -*.DIAGRAM -* -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE void hcf_dma_rx_put( IFBP ifbp, DESC_STRCT *descp ) + *.PURPOSE supply buffers for receive purposes. + * supply the Rx-DELWA descriptor. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * descp address of a DescriptorList + * + *.RETURNS N.A. + * + *.DESCRIPTION + * This function is called by the MSF to supply the HCF with new/more buffers for receive purposes. + * The HCF can be used in 2 fashions: with and without encapsulation for data transfer. + * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. + * As a consequence, some additional constraints apply to the number of descriptor and the buffers associated + * with the first 2 descriptors. Independent of the encapsulation feature, the COUNT fields are ignored. + * A special case is the supplying of the DELWA descriptor, which must be supplied as the first descriptor. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value. + * - NIC interrupts are not disabled while required by parameter action. + * - in case decapsulation by the HCF is selected: + * - The first databuffer does not have the exact size corresponding with the RxFS up to the 802.3 DestAddr + * field (== 29 words). + * - The FrameList does not consists of at least 2 Descriptors. + * - The second databuffer does not have the minimum size of 8 bytes. + *!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get + *!! them in the WCI-spec !!!! + * - DMA is not enabled + * - descriptor list is NULL + * - a descriptor in the descriptor list is not double word aligned + * - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. + * - the DELWA descriptor is not a "singleton" DescriptorList. + * - the DELWA descriptor is not the first Descriptor supplied + * - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied + *!! - Possibly more checks could be added !!!!!!!!!!!!! + * + *.DIAGRAM + * + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ void hcf_dma_rx_put( IFBP ifbp, DESC_STRCT *descp ) { @@ -1614,47 +1613,47 @@ hcf_dma_rx_put( IFBP ifbp, DESC_STRCT *descp ) /************************************************************************************************************ -* -*.MODULE DESC_STRCT* hcf_dma_tx_get( IFBP ifbp ) -*.PURPOSE DMA mode: reclaims and decapsulates packets in the tx descriptor chain if: -* - A Tx packet has been copied from host-RAM into NIC-RAM by the DMA engine -* - The Hermes/DMAengine have been disabled -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* pointer to a reclaimed Tx packet. -* -*.DESCRIPTION -* impact of the disable command: -* When a non-empty pool of Tx descriptors exists (created by means of hcf_dma_put_tx), the MSF -* is supposed to empty that pool by means of hcf_dma_tx_get calls after the disable in an -* disable/enable sequence. -* -*.DIAGRAM -* -*.NOTICE -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE DESC_STRCT* hcf_dma_tx_get( IFBP ifbp ) + *.PURPOSE DMA mode: reclaims and decapsulates packets in the tx descriptor chain if: + * - A Tx packet has been copied from host-RAM into NIC-RAM by the DMA engine + * - The Hermes/DMAengine have been disabled + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * pointer to a reclaimed Tx packet. + * + *.DESCRIPTION + * impact of the disable command: + * When a non-empty pool of Tx descriptors exists (created by means of hcf_dma_put_tx), the MSF + * is supposed to empty that pool by means of hcf_dma_tx_get calls after the disable in an + * disable/enable sequence. + * + *.DIAGRAM + * + *.NOTICE + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ DESC_STRCT* hcf_dma_tx_get( IFBP ifbp ) { -DESC_STRCT *descp; // pointer to start of FrameList + DESC_STRCT *descp; // pointer to start of FrameList descp = get_frame_lst( ifbp, DMA_TX ); if ( descp && descp->buf_addr ) //!be aware of the missing curly bracket - //skip decapsulation at confined descriptor + //skip decapsulation at confined descriptor #if (HCF_ENCAP) == HCF_ENC if ( ( descp->BUF_CNT == HFS_TYPE ) #if (HCF_TYPE) & HCF_TYPE_CCX - || ( descp->BUF_CNT == HFS_DAT ) + || ( descp->BUF_CNT == HFS_DAT ) #endif // HCF_TYPE_CCX - ) { // perform decapsulation if needed + ) { // perform decapsulation if needed descp->next_desc_addr->buf_phys_addr -= HCF_DASA_SIZE; - descp->next_desc_addr->BUF_CNT += HCF_DASA_SIZE; + descp->next_desc_addr->BUF_CNT += HCF_DASA_SIZE; } #endif // HCF_ENC if ( descp == NULL ) { //;?could be integrated into get_frame_lst @@ -1666,125 +1665,125 @@ DESC_STRCT *descp; // pointer to start of FrameList /************************************************************************************************************ -* -*.MODULE void hcf_dma_tx_put( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) -*.PURPOSE puts a packet in the Tx DMA queue in host ram and kicks off the TxDma engine. -* supply the Tx-DELWA descriptor. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* descp address of Tx Descriptor Chain (i.e. a single Tx frame) -* tx_cntl indicates MAC-port and (Hermes) options -* -*.RETURNS N.A. -* -*.DESCRIPTION -* The HCF can be used in 2 fashions: with and without encapsulation for data transfer. -* This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. -* -* Regardless of the HCF_ENCAP system constant, the descriptor list created to describe the frame to be -* transmitted, must supply space to contain the 802.11 header, preceding the actual frame to be transmitted. -* Basically, this only supplies working storage to the HCF which passes this on to the DMA engine. -* As a consequence the contents of this space do not matter. -* Nevertheless BUF_CNT must take in account this storage. -* This working space to contain the 802.11 header may not be fragmented, the first buffer must be -* sufficiently large to contain at least the 802.11 header, i.e. HFS_ADDR_DEST (29 words or 0x3A bytes). -* This way, the HCF can simply, regardless whether or not the HCF encapsulates the frame, write the parameter -* tx_cntl at offset 0x36 (HFS_TX_CNTL) in the first buffer. -* Note that it is allowed to have part or all of the actual frame represented by the first descriptor as long -* as the requirement for storage for the 802.11 header is met, i.e. the 802.3 frame starts at offset -* HFS_ADDR_DEST. -* Except for the Assert on the 1st buffer in case of Encapsualtion, the SIZE fields are ignored. -* -* In case the encapsulation feature is compiled in, there are the following additional requirements. -* o The BUF_CNT of the first buffer changes from a minimum of 0x3A bytes to exactly 0x3A, i.e. the workspace -* to store the 802.11 header -* o The BUF_SIZE of the first buffer is at least the space needed to store the -* - 802.11 header (29 words) -* - 802.3 header, i.e. 12 bytes addressing information and 2 bytes length field -* - 6 bytes SNAP-header -* This results in 39 words or 0x4E bytes or HFS_TYPE. -* Note that if the BUF_SIZE is larger than 0x4E, this surplus is not used. -* o The actual frame begins in the 2nd descriptor (which is already implied by the BUF_CNT == 0x3A requirement) and the associated buffer contains at least the 802.3 header, i.e. the 14 bytes representing addressing information and length/type field -* -* When the HCF does not encapsulates (i.e. length/type field <= 1500), no changes are made to descriptors -* or buffers. -* -* When the HCF actually encapsulates (i.e. length/type field > 1500), it successively writes, starting at -* offset HFS_ADDR_DEST (0x3A) in the first buffer: -* - the 802.3 addressing information, copied from the begin of the second buffer -* - the frame length, derived from the total length of the individual fragments, corrected for the SNAP -* header length and Type field and ignoring the Destination Address, Source Address and Length field -* - the appropriate snap header (Tunnel or 1042, depending on the value of the type field). -* -* The information in the first two descriptors is adjusted accordingly: -* - the first descriptor count is changed from 0x3A to 0x4E (HFS_TYPE), which matches 0x3A + 12 + 2 + 6 -* - the second descriptor count is decreased by 12, being the moved addressing information -* - the second descriptor (physical) buffer address is increased by 12. -* -* When the descriptors are returned by hcf_dma_tx_get, the transformation of the first two descriptors is -* undone. -* -* Under any of the above scenarios, the assert BUF_CNT <= BUF_SIZE must be true for all descriptors -* In case of encapsulation, BUF_SIZE of the 1st descriptor is asserted to be at least HFS_TYPE (0x4E), so it is NOT tested. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value. -* - tx_cntl has a recognizable out-of-range value. -* - NIC interrupts are not disabled while required by parameter action. -* - in case encapsulation by the HCF is selected: -* - The FrameList does not consists of at least 2 Descriptors. -* - The first databuffer does not contain exactly the (space for) the 802.11 header (== 28 words) -* - The first databuffer does not have a size to additionally accommodate the 802.3 header and the -* SNAP header of the frame after encapsulation (== 39 words). -* - The second databuffer does not contain at least DA, SA and 'type/length' (==14 bytes or 7 words) -*!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get -*!! them in the WCI-spec !!!! -* - DMA is not enabled -* - descriptor list is NULL -* - a descriptor in the descriptor list is not double word aligned -* - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. -* - the DELWA descriptor is not a "singleton" DescriptorList. -* - the DELWA descriptor is not the first Descriptor supplied -* - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied -*!! - Possibly more checks could be added !!!!!!!!!!!!! -*.DIAGRAM -* -*.NOTICE -* -*.ENDDOC END DOCUMENTATION -* -* -*1: Write tx_cntl parameter to HFS_TX_CNTL field into the Hermes-specific header in buffer 1 -*4: determine whether encapsulation is needed and write the type (tunnel or 1042) already at the appropriate -* offset in the 1st buffer -*6: Build the encapsualtion enveloppe in the free space at the end of the 1st buffer -* - Copy DA/SA fields from the 2nd buffer -* - Calculate total length of the message (snap-header + type-field + the length of all buffer fragments -* associated with the 802.3 frame (i.e all descriptors except the first), but not the DestinationAddress, -* SourceAddress and length-field) -* Assert the message length -* Write length. Note that the message is in BE format, hence on LE platforms the length must be converted -* ;? THIS IS NOT WHAT CURRENTLY IS IMPLEMENTED -* - Write snap header. Note that the last byte of the snap header is NOT copied, that byte is already in -* place as result of the call to hcf_encap. -* Note that there are many ways to skin a cat. To express the offsets in the 1st buffer while writing -* the snap header, HFS_TYPE is chosen as a reference point to make it easier to grasp that the snap header -* and encapsualtion type are at least relative in the right. -*8: modify 1st descriptor to reflect moved part of the 802.3 header + Snap-header -* modify 2nd descriptor to skip the moved part of the 802.3 header (DA/SA -*10: set each descriptor to 'DMA owned', clear all other control bits. -* Set SOP bit on first descriptor. Set EOP bit on last descriptor. -*12: Either append the current frame to an existing descriptor list or -*14: create a list beginning with the current frame -*16: remember the new end of the list -*20: hand the frame over to the DMA engine -************************************************************************************************************/ + * + *.MODULE void hcf_dma_tx_put( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) + *.PURPOSE puts a packet in the Tx DMA queue in host ram and kicks off the TxDma engine. + * supply the Tx-DELWA descriptor. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * descp address of Tx Descriptor Chain (i.e. a single Tx frame) + * tx_cntl indicates MAC-port and (Hermes) options + * + *.RETURNS N.A. + * + *.DESCRIPTION + * The HCF can be used in 2 fashions: with and without encapsulation for data transfer. + * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. + * + * Regardless of the HCF_ENCAP system constant, the descriptor list created to describe the frame to be + * transmitted, must supply space to contain the 802.11 header, preceding the actual frame to be transmitted. + * Basically, this only supplies working storage to the HCF which passes this on to the DMA engine. + * As a consequence the contents of this space do not matter. + * Nevertheless BUF_CNT must take in account this storage. + * This working space to contain the 802.11 header may not be fragmented, the first buffer must be + * sufficiently large to contain at least the 802.11 header, i.e. HFS_ADDR_DEST (29 words or 0x3A bytes). + * This way, the HCF can simply, regardless whether or not the HCF encapsulates the frame, write the parameter + * tx_cntl at offset 0x36 (HFS_TX_CNTL) in the first buffer. + * Note that it is allowed to have part or all of the actual frame represented by the first descriptor as long + * as the requirement for storage for the 802.11 header is met, i.e. the 802.3 frame starts at offset + * HFS_ADDR_DEST. + * Except for the Assert on the 1st buffer in case of Encapsualtion, the SIZE fields are ignored. + * + * In case the encapsulation feature is compiled in, there are the following additional requirements. + * o The BUF_CNT of the first buffer changes from a minimum of 0x3A bytes to exactly 0x3A, i.e. the workspace + * to store the 802.11 header + * o The BUF_SIZE of the first buffer is at least the space needed to store the + * - 802.11 header (29 words) + * - 802.3 header, i.e. 12 bytes addressing information and 2 bytes length field + * - 6 bytes SNAP-header + * This results in 39 words or 0x4E bytes or HFS_TYPE. + * Note that if the BUF_SIZE is larger than 0x4E, this surplus is not used. + * o The actual frame begins in the 2nd descriptor (which is already implied by the BUF_CNT == 0x3A requirement) and the associated buffer contains at least the 802.3 header, i.e. the 14 bytes representing addressing information and length/type field + * + * When the HCF does not encapsulates (i.e. length/type field <= 1500), no changes are made to descriptors + * or buffers. + * + * When the HCF actually encapsulates (i.e. length/type field > 1500), it successively writes, starting at + * offset HFS_ADDR_DEST (0x3A) in the first buffer: + * - the 802.3 addressing information, copied from the begin of the second buffer + * - the frame length, derived from the total length of the individual fragments, corrected for the SNAP + * header length and Type field and ignoring the Destination Address, Source Address and Length field + * - the appropriate snap header (Tunnel or 1042, depending on the value of the type field). + * + * The information in the first two descriptors is adjusted accordingly: + * - the first descriptor count is changed from 0x3A to 0x4E (HFS_TYPE), which matches 0x3A + 12 + 2 + 6 + * - the second descriptor count is decreased by 12, being the moved addressing information + * - the second descriptor (physical) buffer address is increased by 12. + * + * When the descriptors are returned by hcf_dma_tx_get, the transformation of the first two descriptors is + * undone. + * + * Under any of the above scenarios, the assert BUF_CNT <= BUF_SIZE must be true for all descriptors + * In case of encapsulation, BUF_SIZE of the 1st descriptor is asserted to be at least HFS_TYPE (0x4E), so it is NOT tested. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value. + * - tx_cntl has a recognizable out-of-range value. + * - NIC interrupts are not disabled while required by parameter action. + * - in case encapsulation by the HCF is selected: + * - The FrameList does not consists of at least 2 Descriptors. + * - The first databuffer does not contain exactly the (space for) the 802.11 header (== 28 words) + * - The first databuffer does not have a size to additionally accommodate the 802.3 header and the + * SNAP header of the frame after encapsulation (== 39 words). + * - The second databuffer does not contain at least DA, SA and 'type/length' (==14 bytes or 7 words) + *!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get + *!! them in the WCI-spec !!!! + * - DMA is not enabled + * - descriptor list is NULL + * - a descriptor in the descriptor list is not double word aligned + * - a count of size field of a descriptor contains control bits, i.e. bits in the high order nibble. + * - the DELWA descriptor is not a "singleton" DescriptorList. + * - the DELWA descriptor is not the first Descriptor supplied + * - a non_DMA descriptor is supplied before the DELWA Descriptor is supplied + *!! - Possibly more checks could be added !!!!!!!!!!!!! + *.DIAGRAM + * + *.NOTICE + * + *.ENDDOC END DOCUMENTATION + * + * + *1: Write tx_cntl parameter to HFS_TX_CNTL field into the Hermes-specific header in buffer 1 + *4: determine whether encapsulation is needed and write the type (tunnel or 1042) already at the appropriate + * offset in the 1st buffer + *6: Build the encapsualtion enveloppe in the free space at the end of the 1st buffer + * - Copy DA/SA fields from the 2nd buffer + * - Calculate total length of the message (snap-header + type-field + the length of all buffer fragments + * associated with the 802.3 frame (i.e all descriptors except the first), but not the DestinationAddress, + * SourceAddress and length-field) + * Assert the message length + * Write length. Note that the message is in BE format, hence on LE platforms the length must be converted + * ;? THIS IS NOT WHAT CURRENTLY IS IMPLEMENTED + * - Write snap header. Note that the last byte of the snap header is NOT copied, that byte is already in + * place as result of the call to hcf_encap. + * Note that there are many ways to skin a cat. To express the offsets in the 1st buffer while writing + * the snap header, HFS_TYPE is chosen as a reference point to make it easier to grasp that the snap header + * and encapsualtion type are at least relative in the right. + *8: modify 1st descriptor to reflect moved part of the 802.3 header + Snap-header + * modify 2nd descriptor to skip the moved part of the 802.3 header (DA/SA + *10: set each descriptor to 'DMA owned', clear all other control bits. + * Set SOP bit on first descriptor. Set EOP bit on last descriptor. + *12: Either append the current frame to an existing descriptor list or + *14: create a list beginning with the current frame + *16: remember the new end of the list + *20: hand the frame over to the DMA engine + ************************************************************************************************************/ void hcf_dma_tx_put( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) { -DESC_STRCT *p = descp->next_desc_addr; -int i; + DESC_STRCT *p = descp->next_desc_addr; + int i; #if HCF_ASSERT int x = ifbp->IFB_FWIdentity.comp_id == COMP_ID_FW_AP ? tx_cntl & ~HFS_TX_CNTL_PORT : tx_cntl; @@ -1796,21 +1795,21 @@ int i; HCFASSERT( ( ifbp->IFB_CntlOpt & (USE_DMA|DMA_ENABLED) ) == (USE_DMA|DMA_ENABLED), ifbp->IFB_CntlOpt); if ( descp->buf_addr ) { - *(hcf_16*)(descp->buf_addr + HFS_TX_CNTL) = tx_cntl; /*1*/ + *(hcf_16*)(descp->buf_addr + HFS_TX_CNTL) = tx_cntl; /*1*/ #if (HCF_ENCAP) == HCF_ENC - HCFASSERT( descp->next_desc_addr, 0 ); //at least 2 descripors - HCFASSERT( descp->BUF_CNT == HFS_ADDR_DEST, descp->BUF_CNT ); //exact length required for 1st buffer - HCFASSERT( descp->BUF_SIZE >= HCF_DMA_TX_BUF1_SIZE, descp->BUF_SIZE ); //minimal storage for encapsulation - HCFASSERT( p->BUF_CNT >= 14, p->BUF_CNT ); //at least DA, SA and 'type' in 2nd buffer + HCFASSERT( descp->next_desc_addr, 0 ); //at least 2 descripors + HCFASSERT( descp->BUF_CNT == HFS_ADDR_DEST, descp->BUF_CNT ); //exact length required for 1st buffer + HCFASSERT( descp->BUF_SIZE >= HCF_DMA_TX_BUF1_SIZE, descp->BUF_SIZE ); //minimal storage for encapsulation + HCFASSERT( p->BUF_CNT >= 14, p->BUF_CNT ); //at least DA, SA and 'type' in 2nd buffer #if (HCF_TYPE) & HCF_TYPE_CCX /* if we are doing PPK +/- CMIC, or we are sending a DDP frame */ if ( ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_ON ) || - ( ( p->BUF_CNT >= 20 ) && ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) && - ( p->buf_addr[12] == 0xAA ) && ( p->buf_addr[13] == 0xAA ) && - ( p->buf_addr[14] == 0x03 ) && ( p->buf_addr[15] == 0x00 ) && - ( p->buf_addr[16] == 0x40 ) && ( p->buf_addr[17] == 0x96 ) && - ( p->buf_addr[18] == 0x00 ) && ( p->buf_addr[19] == 0x00 ))) + ( ( p->BUF_CNT >= 20 ) && ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) && + ( p->buf_addr[12] == 0xAA ) && ( p->buf_addr[13] == 0xAA ) && + ( p->buf_addr[14] == 0x03 ) && ( p->buf_addr[15] == 0x00 ) && + ( p->buf_addr[16] == 0x40 ) && ( p->buf_addr[17] == 0x96 ) && + ( p->buf_addr[18] == 0x00 ) && ( p->buf_addr[19] == 0x00 ))) { /* copy the DA/SA to the first buffer */ for ( i = 0; i < HCF_DASA_SIZE; i++ ) { @@ -1821,34 +1820,34 @@ int i; do { i += p->BUF_CNT; } while( p = p->next_desc_addr ); i -= HCF_DASA_SIZE ; /* convert the length field to big endian, using the endian friendly macros */ - i = CNV_SHORT_TO_BIG(i); //!! this converts ONLY on LE platforms, how does that relate to the non-CCX code + i = CNV_SHORT_TO_BIG(i); //!! this converts ONLY on LE platforms, how does that relate to the non-CCX code *(hcf_16*)(&descp->buf_addr[HFS_LEN]) = (hcf_16)i; descp->BUF_CNT = HFS_DAT; // modify 2nd descriptor to skip the 'Da/Sa' fields descp->next_desc_addr->buf_phys_addr += HCF_DASA_SIZE; - descp->next_desc_addr->BUF_CNT -= HCF_DASA_SIZE; + descp->next_desc_addr->BUF_CNT -= HCF_DASA_SIZE; } else #endif // HCF_TYPE_CCX { - descp->buf_addr[HFS_TYPE-1] = hcf_encap(&descp->next_desc_addr->buf_addr[HCF_DASA_SIZE]); /*4*/ + descp->buf_addr[HFS_TYPE-1] = hcf_encap(&descp->next_desc_addr->buf_addr[HCF_DASA_SIZE]); /*4*/ if ( descp->buf_addr[HFS_TYPE-1] != ENC_NONE ) { - for ( i=0; i < HCF_DASA_SIZE; i++ ) { /*6*/ + for ( i=0; i < HCF_DASA_SIZE; i++ ) { /*6*/ descp->buf_addr[i + HFS_ADDR_DEST] = descp->next_desc_addr->buf_addr[i]; } i = sizeof(snap_header) + 2 - ( 2*6 + 2 ); do { i += p->BUF_CNT; } while ( ( p = p->next_desc_addr ) != NULL ); - *(hcf_16*)(&descp->buf_addr[HFS_LEN]) = CNV_END_SHORT(i); //!! this converts on ALL platforms, how does that relate to the CCX code + *(hcf_16*)(&descp->buf_addr[HFS_LEN]) = CNV_END_SHORT(i); //!! this converts on ALL platforms, how does that relate to the CCX code for ( i=0; i < sizeof(snap_header) - 1; i++) { descp->buf_addr[HFS_TYPE - sizeof(snap_header) + i] = snap_header[i]; } - descp->BUF_CNT = HFS_TYPE; /*8*/ - descp->next_desc_addr->buf_phys_addr += HCF_DASA_SIZE; - descp->next_desc_addr->BUF_CNT -= HCF_DASA_SIZE; + descp->BUF_CNT = HFS_TYPE; /*8*/ + descp->next_desc_addr->buf_phys_addr += HCF_DASA_SIZE; + descp->next_desc_addr->BUF_CNT -= HCF_DASA_SIZE; } } #endif // HCF_ENC - } + } put_frame_lst( ifbp, descp, DMA_TX ); HCFLOGEXIT( HCF_TRACE_DMA_TX_PUT ); } // hcf_dma_tx_put @@ -1857,44 +1856,44 @@ int i; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.MODULE hcf_8 hcf_encap( wci_bufp type ) -*.PURPOSE test whether RFC1042 or Bridge-Tunnel encapsulation is needed. -* -*.ARGUMENTS -* type (Far) pointer to the (Big Endian) Type/Length field in the message -* -*.RETURNS -* ENC_NONE len/type is "len" ( (BIG_ENDIAN)type <= 1500 ) -* ENC_TUNNEL len/type is "type" and 0x80F3 or 0x8137 -* ENC_1042 len/type is "type" but not 0x80F3 or 0x8137 -* -*.CONDITIONS -* NIC Interrupts d.c -* -*.DESCRIPTION -* Type must point to the Len/Type field of the message, this is the 2-byte field immediately after the 6 byte -* Destination Address and 6 byte Source Address. The 2 successive bytes addressed by type are interpreted as -* a Big Endian value. If that value is less than or equal to 1500, the message is assumed to be in 802.3 -* format. Otherwise the message is assumed to be in Ethernet-II format. Depending on the value of Len/Typ, -* Bridge Tunnel or RFC1042 encapsulation is needed. -* -*.DIAGRAM -* -* 1: presume 802.3, hence preset return value at ENC_NONE -* 2: convert type from "network" Endian format to native Endian -* 4: the litmus test to distinguish type and len. -* The hard code "magic" value of 1500 is intentional and should NOT be replaced by a mnemonic because it is -* not related at all to the maximum frame size supported by the Hermes. -* 6: check type against: -* 0x80F3 //AppleTalk Address Resolution Protocol (AARP) -* 0x8137 //IPX -* to determine the type of encapsulation -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ -#if HCF_ENCAP //i.e HCF_ENC or HCF_ENC_SUP + * + *.MODULE hcf_8 hcf_encap( wci_bufp type ) + *.PURPOSE test whether RFC1042 or Bridge-Tunnel encapsulation is needed. + * + *.ARGUMENTS + * type (Far) pointer to the (Big Endian) Type/Length field in the message + * + *.RETURNS + * ENC_NONE len/type is "len" ( (BIG_ENDIAN)type <= 1500 ) + * ENC_TUNNEL len/type is "type" and 0x80F3 or 0x8137 + * ENC_1042 len/type is "type" but not 0x80F3 or 0x8137 + * + *.CONDITIONS + * NIC Interrupts d.c + * + *.DESCRIPTION + * Type must point to the Len/Type field of the message, this is the 2-byte field immediately after the 6 byte + * Destination Address and 6 byte Source Address. The 2 successive bytes addressed by type are interpreted as + * a Big Endian value. If that value is less than or equal to 1500, the message is assumed to be in 802.3 + * format. Otherwise the message is assumed to be in Ethernet-II format. Depending on the value of Len/Typ, + * Bridge Tunnel or RFC1042 encapsulation is needed. + * + *.DIAGRAM + * + * 1: presume 802.3, hence preset return value at ENC_NONE + * 2: convert type from "network" Endian format to native Endian + * 4: the litmus test to distinguish type and len. + * The hard code "magic" value of 1500 is intentional and should NOT be replaced by a mnemonic because it is + * not related at all to the maximum frame size supported by the Hermes. + * 6: check type against: + * 0x80F3 //AppleTalk Address Resolution Protocol (AARP) + * 0x8137 //IPX + * to determine the type of encapsulation + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ +#if HCF_ENCAP //i.e HCF_ENC or HCF_ENC_SUP #if ! ( (HCF_ENCAP) & HCF_ENC_SUP ) HCF_STATIC #endif // HCF_ENCAP @@ -1902,12 +1901,12 @@ hcf_8 hcf_encap( wci_bufp type ) { -hcf_8 rc = ENC_NONE; /* 1 */ -hcf_16 t = (hcf_16)(*type<<8) + *(type+1); /* 2 */ + hcf_8 rc = ENC_NONE; /* 1 */ + hcf_16 t = (hcf_16)(*type<<8) + *(type+1); /* 2 */ - if ( t > 1500 ) { /* 4 */ + if ( t > 1500 ) { /* 4 */ if ( t == 0x8137 || t == 0x80F3 ) { - rc = ENC_TUNNEL; /* 6 */ + rc = ENC_TUNNEL; /* 6 */ } else { rc = ENC_1042; } @@ -1919,121 +1918,121 @@ hcf_16 t = (hcf_16)(*type<<8) + *(type+1); /* 2 */ /************************************************************************************************************ -* -*.MODULE int hcf_get_info( IFBP ifbp, LTVP ltvp ) -*.PURPOSE Obtains transient and persistent configuration information from the Card and from the HCF. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* ltvp address of LengthTypeValue structure specifying the "what" and the "how much" of the -* information to be collected from the HCF or from the Hermes -* -*.RETURNS -* HCF_ERR_LEN The provided buffer was too small -* HCF_SUCCESS Success -*!! via cmd_exe ( type >= CFG_RID_FW_MIN ) -* HCF_ERR_NO_NIC NIC removed during retrieval -* HCF_ERR_TIME_OUT Expected Hermes event did not occur in expected time -*!! via cmd_exe and setup_bap (type >= CFG_RID_FW_MIN ) -* HCF_ERR_DEFUNCT_... HCF is in defunct mode (bits 0x7F reflect cause) -* -*.DESCRIPTION -* The T-field of the LTV-record (provided by the MSF in parameter ltvp) specifies the RID wanted. The RID -* information identified by the T-field is copied into the V-field. -* On entry, the L-field specifies the size of the buffer, also called the "Initial DataLength". The L-value -* includes the size of the T-field, but not the size of the L-field itself. -* On return, the L-field indicates the number of words actually contained by the Type and Value fields. -* As the size of the Type field in the LTV-record is included in the "Initial DataLength" of the record, the -* V-field can contain at most "Initial DataLength" - 1 words of data. -* Copying stops if either the complete Information is copied or if the number of words indicated by the -* "Initial DataLength" were copied. The "Initial DataLength" acts as a safe guard against Configuration -* Information blocks that have different sizes for different F/W versions, e.g. when later versions support -* more tallies than earlier versions. -* If the size of Value field of the RID exceeds the size of the "Initial DataLength" -1, as much data -* as fits is copied, and an error status of HCF_ERR_LEN is returned. -* -* It is the responsibility of the MSF to detect card removal and re-insertion and not call the HCF when the -* NIC is absent. The MSF cannot, however, timely detect a Card removal if the Card is removed while -* hcf_get_info is in progress. Therefore, the HCF performs its own check on Card presence after the read -* operation of the NIC data. If the Card is not present or removed during the execution of hcf_get_info, -* HCF_ERR_NO_NIC is returned and the content of the Data Buffer is unpredictable. This check is not performed -* in case of the "HCF embedded" pseudo RIDs like CFG_TALLIES. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value. -* - reentrancy, may be caused by calling hcf_functions without adequate protection -* against NIC interrupts or multi-threading. -* - ltvp is a NULL pointer. -* - length field of the LTV-record at entry is 0 or 1 or has an excessive value (i.e. exceeds HCF_MAX_LTV). -* - type field of the LTV-record is invalid. -* -*.DIAGRAM -* Hcf_get_mb_info copies the contents of the oldest MailBox Info block in the MailBox to PC RAM. If len is -* less than the size of the MailBox Info block, only as much as fits in the PC RAM buffer is copied. After -* the copying the MailBox Read pointer is updated to point to the next MailBox Info block, hence the -* remainder of an "oversized" MailBox Info block is lost. The truncation of the MailBox Info block is NOT -* reflected in the return status. Note that hcf_get_info guarantees the length of the PC RAM buffer meets -* the minimum requirements of at least 2, so no PC RAM buffer overrun. -* -* Calling hcf_get_mb_info when their is no MailBox Info block available or when there is no MailBox at all, -* results in a "NULL" MailBox Info block. -* -*12: see NOTICE -*17: The return status of cmd_wait and the first hcfio_in_string can be ignored, because when one fails, the -* other fails via the IFB_DefunctStat mechanism -*20: "HCFASSERT( rc == HCF_SUCCESS, rc )" is not suitable because this will always trigger as side effect of -* the HCFASSERT in hcf_put_info which calls hcf_get_info to figure out whether the RID exists at all. + * + *.MODULE int hcf_get_info( IFBP ifbp, LTVP ltvp ) + *.PURPOSE Obtains transient and persistent configuration information from the Card and from the HCF. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * ltvp address of LengthTypeValue structure specifying the "what" and the "how much" of the + * information to be collected from the HCF or from the Hermes + * + *.RETURNS + * HCF_ERR_LEN The provided buffer was too small + * HCF_SUCCESS Success + *!! via cmd_exe ( type >= CFG_RID_FW_MIN ) + * HCF_ERR_NO_NIC NIC removed during retrieval + * HCF_ERR_TIME_OUT Expected Hermes event did not occur in expected time + *!! via cmd_exe and setup_bap (type >= CFG_RID_FW_MIN ) + * HCF_ERR_DEFUNCT_... HCF is in defunct mode (bits 0x7F reflect cause) + * + *.DESCRIPTION + * The T-field of the LTV-record (provided by the MSF in parameter ltvp) specifies the RID wanted. The RID + * information identified by the T-field is copied into the V-field. + * On entry, the L-field specifies the size of the buffer, also called the "Initial DataLength". The L-value + * includes the size of the T-field, but not the size of the L-field itself. + * On return, the L-field indicates the number of words actually contained by the Type and Value fields. + * As the size of the Type field in the LTV-record is included in the "Initial DataLength" of the record, the + * V-field can contain at most "Initial DataLength" - 1 words of data. + * Copying stops if either the complete Information is copied or if the number of words indicated by the + * "Initial DataLength" were copied. The "Initial DataLength" acts as a safe guard against Configuration + * Information blocks that have different sizes for different F/W versions, e.g. when later versions support + * more tallies than earlier versions. + * If the size of Value field of the RID exceeds the size of the "Initial DataLength" -1, as much data + * as fits is copied, and an error status of HCF_ERR_LEN is returned. + * + * It is the responsibility of the MSF to detect card removal and re-insertion and not call the HCF when the + * NIC is absent. The MSF cannot, however, timely detect a Card removal if the Card is removed while + * hcf_get_info is in progress. Therefore, the HCF performs its own check on Card presence after the read + * operation of the NIC data. If the Card is not present or removed during the execution of hcf_get_info, + * HCF_ERR_NO_NIC is returned and the content of the Data Buffer is unpredictable. This check is not performed + * in case of the "HCF embedded" pseudo RIDs like CFG_TALLIES. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value. + * - reentrancy, may be caused by calling hcf_functions without adequate protection + * against NIC interrupts or multi-threading. + * - ltvp is a NULL pointer. + * - length field of the LTV-record at entry is 0 or 1 or has an excessive value (i.e. exceeds HCF_MAX_LTV). + * - type field of the LTV-record is invalid. + * + *.DIAGRAM + * Hcf_get_mb_info copies the contents of the oldest MailBox Info block in the MailBox to PC RAM. If len is + * less than the size of the MailBox Info block, only as much as fits in the PC RAM buffer is copied. After + * the copying the MailBox Read pointer is updated to point to the next MailBox Info block, hence the + * remainder of an "oversized" MailBox Info block is lost. The truncation of the MailBox Info block is NOT + * reflected in the return status. Note that hcf_get_info guarantees the length of the PC RAM buffer meets + * the minimum requirements of at least 2, so no PC RAM buffer overrun. + * + * Calling hcf_get_mb_info when their is no MailBox Info block available or when there is no MailBox at all, + * results in a "NULL" MailBox Info block. + * + *12: see NOTICE + *17: The return status of cmd_wait and the first hcfio_in_string can be ignored, because when one fails, the + * other fails via the IFB_DefunctStat mechanism + *20: "HCFASSERT( rc == HCF_SUCCESS, rc )" is not suitable because this will always trigger as side effect of + * the HCFASSERT in hcf_put_info which calls hcf_get_info to figure out whether the RID exists at all. -*.NOTICE -* -* "HCF embedded" pseudo RIDs: -* CFG_MB_INFO, CFG_TALLIES, CFG_DRV_IDENTITY, CFG_DRV_SUP_RANGE, CFG_DRV_ACT_RANGES_PRI, -* CFG_DRV_ACT_RANGES_STA, CFG_DRV_ACT_RANGES_HSI -* Note the HCF_ERR_LEN is NOT adequately set, when L >= 2 but less than needed -* -* Remarks: Transfers operation information and transient and persistent configuration information from the -* Card and from the HCF to the MSF. -* The exact layout of the provided data structure depends on the action code. Copying stops if either the -* complete Configuration Information is copied or if the number of bytes indicated by len is copied. Len -* acts as a safe guard against Configuration Information blocks which have different sizes for different -* Hermes versions, e.g. when later versions support more tallies than earlier versions. It is a conscious -* decision that unused parts of the PC RAM buffer are not cleared. -* -* Remarks: The only error against which is protected is the "Read error" as result of Card removal. Only the -* last hcf_io_string need to be protected because if the first fails the second will fail as well. Checking -* for cmd_exe errors is supposed superfluous because problems in cmd_exe are already caught or will be -* caught by hcf_enable. -* -* CFG_MB_INFO: copy the oldest MailBox Info Block or the "null" block if none available. -* -* The mechanism to HCF_ASSERT on invalid typ-codes in the LTV record is based on the following strategy: -* - during the pseudo-asynchronous Hermes commands (diagnose, download) only CFG_MB_INFO is acceptable -* - some codes (e.g. CFG_TALLIES) are explicitly handled by the HCF which implies that these codes -* are valid -* - all other codes in the range 0xFC00 through 0xFFFF are passed to the Hermes. The Hermes returns an -* LTV record with a zero value in the L-field for all Typ-codes it does not recognize. This is -* defined and intended behavior, so HCF_ASSERT does not catch on this phenomena. -* - all remaining codes are invalid and cause an ASSERT. -* -*.CONDITIONS -* In case of USB, HCF_MAX_MSG ;?USED;? to limit the amount of data that can be retrieved via hcf_get_info. -* -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + *.NOTICE + * + * "HCF embedded" pseudo RIDs: + * CFG_MB_INFO, CFG_TALLIES, CFG_DRV_IDENTITY, CFG_DRV_SUP_RANGE, CFG_DRV_ACT_RANGES_PRI, + * CFG_DRV_ACT_RANGES_STA, CFG_DRV_ACT_RANGES_HSI + * Note the HCF_ERR_LEN is NOT adequately set, when L >= 2 but less than needed + * + * Remarks: Transfers operation information and transient and persistent configuration information from the + * Card and from the HCF to the MSF. + * The exact layout of the provided data structure depends on the action code. Copying stops if either the + * complete Configuration Information is copied or if the number of bytes indicated by len is copied. Len + * acts as a safe guard against Configuration Information blocks which have different sizes for different + * Hermes versions, e.g. when later versions support more tallies than earlier versions. It is a conscious + * decision that unused parts of the PC RAM buffer are not cleared. + * + * Remarks: The only error against which is protected is the "Read error" as result of Card removal. Only the + * last hcf_io_string need to be protected because if the first fails the second will fail as well. Checking + * for cmd_exe errors is supposed superfluous because problems in cmd_exe are already caught or will be + * caught by hcf_enable. + * + * CFG_MB_INFO: copy the oldest MailBox Info Block or the "null" block if none available. + * + * The mechanism to HCF_ASSERT on invalid typ-codes in the LTV record is based on the following strategy: + * - during the pseudo-asynchronous Hermes commands (diagnose, download) only CFG_MB_INFO is acceptable + * - some codes (e.g. CFG_TALLIES) are explicitly handled by the HCF which implies that these codes + * are valid + * - all other codes in the range 0xFC00 through 0xFFFF are passed to the Hermes. The Hermes returns an + * LTV record with a zero value in the L-field for all Typ-codes it does not recognize. This is + * defined and intended behavior, so HCF_ASSERT does not catch on this phenomena. + * - all remaining codes are invalid and cause an ASSERT. + * + *.CONDITIONS + * In case of USB, HCF_MAX_MSG ;?USED;? to limit the amount of data that can be retrieved via hcf_get_info. + * + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int hcf_get_info( IFBP ifbp, LTVP ltvp ) { -int rc = HCF_SUCCESS; -hcf_16 len = ltvp->len; -hcf_16 type = ltvp->typ; -wci_recordp p = <vp->len; //destination word pointer (in LTV record) -hcf_16 *q = NULL; /* source word pointer Note!! DOS COM can't cope with FAR - * as a consequence MailBox must be near which is usually true anyway - */ -int i; + int rc = HCF_SUCCESS; + hcf_16 len = ltvp->len; + hcf_16 type = ltvp->typ; + wci_recordp p = <vp->len; //destination word pointer (in LTV record) + hcf_16 *q = NULL; /* source word pointer Note!! DOS COM can't cope with FAR + * as a consequence MailBox must be near which is usually true anyway + */ + int i; HCFLOGENTRY( HCF_TRACE_GET_INFO, ltvp->typ ); HCFASSERT( ifbp->IFB_Magic == HCF_MAGIC, ifbp->IFB_Magic ); @@ -2041,12 +2040,12 @@ int i; HCFASSERT( ltvp, 0 ); HCFASSERT( 1 < ltvp->len && ltvp->len <= HCF_MAX_LTV + 1, MERGE_2( ltvp->typ, ltvp->len ) ); - ltvp->len = 0; //default to: No Info Available + ltvp->len = 0; //default to: No Info Available #if defined MSF_COMPONENT_ID || (HCF_EXT) & HCF_EXT_MB //filter out all specials for ( i = 0; ( q = xxxx[i] ) != NULL && q[1] != type; i++ ) /*NOP*/; #endif // MSF_COMPONENT_ID / HCF_EXT_MB #if HCF_TALLIES - if ( type == CFG_TALLIES ) { /*3*/ + if ( type == CFG_TALLIES ) { /*3*/ (void)hcf_action( ifbp, HCF_ACT_TALLIES ); q = (hcf_16*)&ifbp->IFB_TallyLen; } @@ -2058,7 +2057,7 @@ int i; ifbp->IFB_MBRp = 0; //;?Probably superfluous } q = &ifbp->IFB_MBp[ifbp->IFB_MBRp]; - ifbp->IFB_MBRp += *q + 1; //update read pointer + ifbp->IFB_MBRp += *q + 1; //update read pointer if ( ifbp->IFB_MBp[ifbp->IFB_MBRp] == 0xFFFF ) { ifbp->IFB_MBRp = 0; } @@ -2066,8 +2065,8 @@ int i; } } #endif // HCF_EXT_MB - if ( q != NULL ) { //a special or CFG_TALLIES or CFG_MB_INFO - i = min( len, *q ) + 1; //total size of destination (including T-field) + if ( q != NULL ) { //a special or CFG_TALLIES or CFG_MB_INFO + i = min( len, *q ) + 1; //total size of destination (including T-field) while ( i-- ) { *p++ = *q; #if (HCF_TALLIES) & HCF_TALLIES_RESET @@ -2077,50 +2076,50 @@ int i; #endif // HCF_TALLIES_RESET q++; } - } else { // not a special nor CFG_TALLIES nor CFG_MB_INFO - if ( type == CFG_CNTL_OPT ) { //read back effective options + } else { // not a special nor CFG_TALLIES nor CFG_MB_INFO + if ( type == CFG_CNTL_OPT ) { //read back effective options ltvp->len = 2; ltvp->val[0] = ifbp->IFB_CntlOpt; #if (HCF_EXT) & HCF_EXT_NIC_ACCESS } else if ( type == CFG_PROD_DATA ) { //only needed for some test tool on top of H-II NDIS driver -hcf_io io_port; -wci_bufp pt; //pointer with the "right" type, just to help ease writing macros with embedded assembly + hcf_io io_port; + wci_bufp pt; //pointer with the "right" type, just to help ease writing macros with embedded assembly OPW( HREG_AUX_PAGE, (hcf_16)(PLUG_DATA_OFFSET >> 7) ); OPW( HREG_AUX_OFFSET, (hcf_16)(PLUG_DATA_OFFSET & 0x7E) ); - io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; //to prevent side effects of the MSF-defined macro - p = ltvp->val; //destination char pointer (in LTV record) + io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; //to prevent side effects of the MSF-defined macro + p = ltvp->val; //destination char pointer (in LTV record) i = len - 1; if (i > 0 ) { - pt = (wci_bufp)p; //just to help ease writing macros with embedded assembly + pt = (wci_bufp)p; //just to help ease writing macros with embedded assembly IN_PORT_STRING_8_16( io_port, pt, i ); //space used by T: -1 } } else if ( type == CFG_CMD_HCF ) { #define P ((CFG_CMD_HCF_STRCT FAR *)ltvp) - HCFASSERT( P->cmd == CFG_CMD_HCF_REG_ACCESS, P->cmd ); //only Hermes register access supported + HCFASSERT( P->cmd == CFG_CMD_HCF_REG_ACCESS, P->cmd ); //only Hermes register access supported if ( P->cmd == CFG_CMD_HCF_REG_ACCESS ) { - HCFASSERT( P->mode < ifbp->IFB_IOBase, P->mode ); //Check Register space - ltvp->len = min( len, 4 ); //RESTORE ltv length + HCFASSERT( P->mode < ifbp->IFB_IOBase, P->mode ); //Check Register space + ltvp->len = min( len, 4 ); //RESTORE ltv length P->add_info = IPW( P->mode ); } #undef P #endif // HCF_EXT_NIC_ACCESS #if (HCF_ASSERT) & HCF_ASSERT_PRINTF - } else if (type == CFG_FW_PRINTF) { - rc = fw_printf(ifbp, (CFG_FW_PRINTF_STRCT*)ltvp); + } else if (type == CFG_FW_PRINTF) { + rc = fw_printf(ifbp, (CFG_FW_PRINTF_STRCT*)ltvp); #endif // HCF_ASSERT_PRINTF } else if ( type >= CFG_RID_FW_MIN ) { //;? by using HCMD_BUSY option when calling cmd_exe, using a get_frag with length 0 just to set up the //;? BAP and calling cmd_cmpl, you could merge the 2 Busy waits. Whether this really helps (and what //;? would be the optimal sequence in cmd_exe and get_frag) would have to be MEASURED -/*17*/ if ( ( rc = cmd_exe( ifbp, HCMD_ACCESS, type ) ) == HCF_SUCCESS && + /*17*/ if ( ( rc = cmd_exe( ifbp, HCMD_ACCESS, type ) ) == HCF_SUCCESS && ( rc = setup_bap( ifbp, type, 0, IO_IN ) ) == HCF_SUCCESS ) { get_frag( ifbp, (wci_bufp)<vp->len, 2*len+2 BE_PAR(2) ); - if ( IPW( HREG_STAT ) == 0xFFFF ) { //NIC removal test + if ( IPW( HREG_STAT ) == 0xFFFF ) { //NIC removal test ltvp->len = 0; HCFASSERT( DO_ASSERT, type ); } } -/*12*/ } else HCFASSERT( DO_ASSERT, type ) /*NOP*/; //NOP in case HCFASSERT is dummy + /*12*/ } else HCFASSERT( DO_ASSERT, type ) /*NOP*/; //NOP in case HCFASSERT is dummy } if ( len < ltvp->len ) { ltvp->len = len; @@ -2129,86 +2128,86 @@ wci_bufp pt; //pointer with the "right" type, just to help ease writing macr } } HCFASSERT( rc == HCF_SUCCESS || ( rc == HCF_ERR_LEN && ifbp->IFB_AssertTrace & 1<typ ); HCFASSERT( ifbp->IFB_Magic == HCF_MAGIC, ifbp->IFB_Magic ); @@ -2216,115 +2215,116 @@ int rc = HCF_SUCCESS; HCFASSERT( ltvp, 0 ); HCFASSERT( 1 < ltvp->len && ltvp->len <= HCF_MAX_LTV + 1, ltvp->len ); - //all codes between 0xFA00 and 0xFCFF are passed to Hermes + //all codes between 0xFA00 and 0xFCFF are passed to Hermes #if (HCF_TYPE) & HCF_TYPE_WPA - { hcf_16 i; - hcf_32 FAR * key_p; - - if ( ltvp->typ == CFG_ADD_TKIP_DEFAULT_KEY || ltvp->typ == CFG_ADD_TKIP_MAPPED_KEY ) { - key_p = (hcf_32*)((CFG_ADD_TKIP_MAPPED_KEY_STRCT FAR *)ltvp)->tx_mic_key; - i = TX_KEY; //i.e. TxKeyIndicator == 1, KeyID == 0 - if ( ltvp->typ == CFG_ADD_TKIP_DEFAULT_KEY ) { - key_p = (hcf_32*)((CFG_ADD_TKIP_DEFAULT_KEY_STRCT FAR *)ltvp)->tx_mic_key; - i = CNV_LITTLE_TO_SHORT(((CFG_ADD_TKIP_DEFAULT_KEY_STRCT FAR *)ltvp)->tkip_key_id_info); - } - if ( i & TX_KEY ) { /* TxKeyIndicator == 1 - (either really set by MSF in case of DEFAULT or faked by HCF in case of MAPPED ) */ - ifbp->IFB_MICTxCntl = (hcf_16)( HFS_TX_CNTL_MIC | (i & KEY_ID )<<8 ); - ifbp->IFB_MICTxKey[0] = CNV_LONGP_TO_LITTLE( key_p ); - ifbp->IFB_MICTxKey[1] = CNV_LONGP_TO_LITTLE( (key_p+1) ); + { + hcf_16 i; + hcf_32 FAR * key_p; + + if ( ltvp->typ == CFG_ADD_TKIP_DEFAULT_KEY || ltvp->typ == CFG_ADD_TKIP_MAPPED_KEY ) { + key_p = (hcf_32*)((CFG_ADD_TKIP_MAPPED_KEY_STRCT FAR *)ltvp)->tx_mic_key; + i = TX_KEY; //i.e. TxKeyIndicator == 1, KeyID == 0 + if ( ltvp->typ == CFG_ADD_TKIP_DEFAULT_KEY ) { + key_p = (hcf_32*)((CFG_ADD_TKIP_DEFAULT_KEY_STRCT FAR *)ltvp)->tx_mic_key; + i = CNV_LITTLE_TO_SHORT(((CFG_ADD_TKIP_DEFAULT_KEY_STRCT FAR *)ltvp)->tkip_key_id_info); + } + if ( i & TX_KEY ) { /* TxKeyIndicator == 1 + (either really set by MSF in case of DEFAULT or faked by HCF in case of MAPPED ) */ + ifbp->IFB_MICTxCntl = (hcf_16)( HFS_TX_CNTL_MIC | (i & KEY_ID )<<8 ); + ifbp->IFB_MICTxKey[0] = CNV_LONGP_TO_LITTLE( key_p ); + ifbp->IFB_MICTxKey[1] = CNV_LONGP_TO_LITTLE( (key_p+1) ); + } + i = ( i & KEY_ID ) * 2; + ifbp->IFB_MICRxKey[i] = CNV_LONGP_TO_LITTLE( (key_p+2) ); + ifbp->IFB_MICRxKey[i+1] = CNV_LONGP_TO_LITTLE( (key_p+3) ); } - i = ( i & KEY_ID ) * 2; - ifbp->IFB_MICRxKey[i] = CNV_LONGP_TO_LITTLE( (key_p+2) ); - ifbp->IFB_MICRxKey[i+1] = CNV_LONGP_TO_LITTLE( (key_p+3) ); - } #define P ((CFG_REMOVE_TKIP_DEFAULT_KEY_STRCT FAR *)ltvp) - if ( ( ltvp->typ == CFG_REMOVE_TKIP_MAPPED_KEY ) || - ( ltvp->typ == CFG_REMOVE_TKIP_DEFAULT_KEY && - ( (ifbp->IFB_MICTxCntl >> 8) & KEY_ID ) == CNV_SHORT_TO_LITTLE(P->tkip_key_id ) - ) - ) { ifbp->IFB_MICTxCntl = 0; } //disable MIC-engine + if ( ( ltvp->typ == CFG_REMOVE_TKIP_MAPPED_KEY ) || + ( ltvp->typ == CFG_REMOVE_TKIP_DEFAULT_KEY && + ( (ifbp->IFB_MICTxCntl >> 8) & KEY_ID ) == CNV_SHORT_TO_LITTLE(P->tkip_key_id ) + ) + ) { ifbp->IFB_MICTxCntl = 0; } //disable MIC-engine #undef P - } + } #endif // HCF_TYPE_WPA if ( ltvp->typ == CFG_PROG ) { rc = download( ifbp, (CFG_PROG_STRCT FAR *)ltvp ); } else switch (ltvp->typ) { #if (HCF_ASSERT) & HCF_ASSERT_RT_MSF_RTN - case CFG_REG_ASSERT_RTNP: //Register MSF Routines + case CFG_REG_ASSERT_RTNP: //Register MSF Routines #define P ((CFG_REG_ASSERT_RTNP_STRCT FAR *)ltvp) - ifbp->IFB_AssertRtn = P->rtnp; -// ifbp->IFB_AssertLvl = P->lvl; //TODO not yet supported so default is set in hcf_connect - HCFASSERT( DO_ASSERT, MERGE_2( HCF_ASSERT, 0xCAF1 ) ); //just to proof that the complete assert machinery is working + ifbp->IFB_AssertRtn = P->rtnp; +// ifbp->IFB_AssertLvl = P->lvl; //TODO not yet supported so default is set in hcf_connect + HCFASSERT( DO_ASSERT, MERGE_2( HCF_ASSERT, 0xCAF1 ) ); //just to proof that the complete assert machinery is working #undef P - break; + break; #endif // HCF_ASSERT_RT_MSF_RTN #if (HCF_EXT) & HCF_EXT_INFO_LOG - case CFG_REG_INFO_LOG: //Register Log filter - ifbp->IFB_RIDLogp = ((CFG_RID_LOG_STRCT FAR*)ltvp)->recordp; - break; + case CFG_REG_INFO_LOG: //Register Log filter + ifbp->IFB_RIDLogp = ((CFG_RID_LOG_STRCT FAR*)ltvp)->recordp; + break; #endif // HCF_EXT_INFO_LOG - case CFG_CNTL_OPT: //overrule option - HCFASSERT( ( ltvp->val[0] & ~(USE_DMA | USE_16BIT) ) == 0, ltvp->val[0] ); - if ( ( ltvp->val[0] & USE_DMA ) == 0 ) ifbp->IFB_CntlOpt &= ~USE_DMA; - ifbp->IFB_CntlOpt |= ltvp->val[0] & USE_16BIT; - break; + case CFG_CNTL_OPT: //overrule option + HCFASSERT( ( ltvp->val[0] & ~(USE_DMA | USE_16BIT) ) == 0, ltvp->val[0] ); + if ( ( ltvp->val[0] & USE_DMA ) == 0 ) ifbp->IFB_CntlOpt &= ~USE_DMA; + ifbp->IFB_CntlOpt |= ltvp->val[0] & USE_16BIT; + break; #if (HCF_EXT) & HCF_EXT_MB - case CFG_REG_MB: //Register MailBox + case CFG_REG_MB: //Register MailBox #define P ((CFG_REG_MB_STRCT FAR *)ltvp) - HCFASSERT( ( (hcf_32)P->mb_addr & 0x0001 ) == 0, (hcf_32)P->mb_addr ); - HCFASSERT( (P)->mb_size >= 60, (P)->mb_size ); - ifbp->IFB_MBp = P->mb_addr; - /* if no MB present, size must be 0 for ;?the old;? put_info_mb to work correctly */ - ifbp->IFB_MBSize = ifbp->IFB_MBp == NULL ? 0 : P->mb_size; - ifbp->IFB_MBWp = ifbp->IFB_MBRp = 0; - ifbp->IFB_MBp[0] = 0; //flag the MailBox as empty - ifbp->IFB_MBInfoLen = 0; - HCFASSERT( ifbp->IFB_MBSize >= 60 || ifbp->IFB_MBp == NULL, ifbp->IFB_MBSize ); + HCFASSERT( ( (hcf_32)P->mb_addr & 0x0001 ) == 0, (hcf_32)P->mb_addr ); + HCFASSERT( (P)->mb_size >= 60, (P)->mb_size ); + ifbp->IFB_MBp = P->mb_addr; + /* if no MB present, size must be 0 for ;?the old;? put_info_mb to work correctly */ + ifbp->IFB_MBSize = ifbp->IFB_MBp == NULL ? 0 : P->mb_size; + ifbp->IFB_MBWp = ifbp->IFB_MBRp = 0; + ifbp->IFB_MBp[0] = 0; //flag the MailBox as empty + ifbp->IFB_MBInfoLen = 0; + HCFASSERT( ifbp->IFB_MBSize >= 60 || ifbp->IFB_MBp == NULL, ifbp->IFB_MBSize ); #undef P - break; - case CFG_MB_INFO: //store MailBoxInfoBlock - rc = put_info_mb( ifbp, (CFG_MB_INFO_STRCT FAR *)ltvp ); - break; + break; + case CFG_MB_INFO: //store MailBoxInfoBlock + rc = put_info_mb( ifbp, (CFG_MB_INFO_STRCT FAR *)ltvp ); + break; #endif // HCF_EXT_MB #if (HCF_EXT) & HCF_EXT_NIC_ACCESS - case CFG_CMD_NIC: + case CFG_CMD_NIC: #define P ((CFG_CMD_NIC_STRCT FAR *)ltvp) - OPW( HREG_PARAM_2, P->parm2 ); - OPW( HREG_PARAM_1, P->parm1 ); - rc = cmd_exe( ifbp, P->cmd, P->parm0 ); - P->hcf_stat = (hcf_16)rc; - P->stat = IPW( HREG_STAT ); - P->resp0 = IPW( HREG_RESP_0 ); - P->resp1 = IPW( HREG_RESP_1 ); - P->resp2 = IPW( HREG_RESP_2 ); - P->ifb_err_cmd = ifbp->IFB_ErrCmd; - P->ifb_err_qualifier = ifbp->IFB_ErrQualifier; + OPW( HREG_PARAM_2, P->parm2 ); + OPW( HREG_PARAM_1, P->parm1 ); + rc = cmd_exe( ifbp, P->cmd, P->parm0 ); + P->hcf_stat = (hcf_16)rc; + P->stat = IPW( HREG_STAT ); + P->resp0 = IPW( HREG_RESP_0 ); + P->resp1 = IPW( HREG_RESP_1 ); + P->resp2 = IPW( HREG_RESP_2 ); + P->ifb_err_cmd = ifbp->IFB_ErrCmd; + P->ifb_err_qualifier = ifbp->IFB_ErrQualifier; #undef P - break; - case CFG_CMD_HCF: + break; + case CFG_CMD_HCF: #define P ((CFG_CMD_HCF_STRCT FAR *)ltvp) - HCFASSERT( P->cmd == CFG_CMD_HCF_REG_ACCESS, P->cmd ); //only Hermes register access supported - if ( P->cmd == CFG_CMD_HCF_REG_ACCESS ) { - HCFASSERT( P->mode < ifbp->IFB_IOBase, P->mode ); //Check Register space - OPW( P->mode, P->add_info); - } + HCFASSERT( P->cmd == CFG_CMD_HCF_REG_ACCESS, P->cmd ); //only Hermes register access supported + if ( P->cmd == CFG_CMD_HCF_REG_ACCESS ) { + HCFASSERT( P->mode < ifbp->IFB_IOBase, P->mode ); //Check Register space + OPW( P->mode, P->add_info); + } #undef P - break; + break; #endif // HCF_EXT_NIC_ACCESS #if (HCF_ASSERT) & HCF_ASSERT_PRINTF - case CFG_FW_PRINTF_BUFFER_LOCATION: - ifbp->IFB_FwPfBuff = *(CFG_FW_PRINTF_BUFFER_LOCATION_STRCT*)ltvp; - break; + case CFG_FW_PRINTF_BUFFER_LOCATION: + ifbp->IFB_FwPfBuff = *(CFG_FW_PRINTF_BUFFER_LOCATION_STRCT*)ltvp; + break; #endif // HCF_ASSERT_PRINTF - default: //pass everything unknown above the "FID" range to the Hermes or Dongle - rc = put_info( ifbp, ltvp ); - } - //DO NOT !!! HCFASSERT( rc == HCF_SUCCESS, rc ) /* 20 */ + default: //pass everything unknown above the "FID" range to the Hermes or Dongle + rc = put_info( ifbp, ltvp ); + } + //DO NOT !!! HCFASSERT( rc == HCF_SUCCESS, rc ) /* 20 */ HCFLOGEXIT( HCF_TRACE_PUT_INFO ); return rc; } // hcf_put_info @@ -2332,121 +2332,121 @@ int rc = HCF_SUCCESS; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.MODULE int hcf_rcv_msg( IFBP ifbp, DESC_STRCT *descp, unsigned int offset ) -*.PURPOSE All: decapsulate a message. -* pre-HermesII.5: verify MIC. -* non-USB, non-DMA mode: Transfer a message from the NIC to the Host and acknowledge reception. -* USB: Transform a message from proprietary USB format to 802.3 format -* -*.ARGUMENTS -* ifbp address of the Interface Block -* descp Pointer to the Descriptor List location. -* offset USB: not used -* non-USB: specifies the beginning of the data to be obtained (0 corresponds with DestAddr field -* of frame). -* -*.RETURNS -* HCF_SUCCESS No SSN error ( or HCF_ERR_MIC already reported by hcf_service_nic) -* HCF_ERR_MIC message contains an erroneous MIC ( HCF_SUCCESS is reported if HCF_ERR_MIC is already -* reported by hcf_service_nic) -* HCF_ERR_NO_NIC NIC removed during data retrieval -* HCF_ERR_DEFUNCT... -* -*.DESCRIPTION -* The Receive Message Function can be executed by the MSF to obtain the Data Info fields of the message that -* is reported to be available by the Service NIC Function. -* -* The Receive Message Function copies the message data available in the Card memory into a buffer structure -* provided by the MSF. -* Only data of the message indicated by the Service NIC Function can be obtained. -* Execution of the Service NIC function may result in the availability of a new message, but it definitely -* makes the message reported by the preceding Service NIC function, unavailable. -* -* in non-USB/non-DMA mode, hcf_rcv_msg starts the copy process at the (non-negative) offset requested by the -* parameter offset, relative to HFS_ADDR_DEST, e.g offset 0 starts copying from the Destination Address, the -* very begin of the 802.3 frame message. Offset must either lay within the part of the 802.3 frame as stored -* by hcf_service_nic in the lookahead buffer or be just behind it, i.e. the first byte not yet read. -* When offset is within lookahead, data is copied from lookahead. -* When offset is beyond lookahead, data is read directly from RxFS in NIC with disregard of the actual value -* of offset -* -*.NOTICE: -* o at entry: look ahead buffer as passed with hcf_service_nic is still accessible and unchanged -* o at exit: Receive Frame in NIC memory is released -* -* Description: -* Starting at the byte indicated by the Offset value, the bytes are copied from the Data Info -* Part of the current Receive Frame Structure to the Host memory data buffer structure -* identified by descp. -* The maximum value for Offset is the number of characters of the 802.3 frame read into the -* look ahead buffer by hcf_service_nic (i.e. the look ahead buffer size minus -* Control and 802.11 fields) -* If Offset is less than the maximum value, copying starts from the look ahead buffer till the -* end of that buffer is reached -* Then (or if the maximum value is specified for Offset), the -* message is directly copied from NIC memory to Host memory. -* If an invalid (i.e. too large) offset is specified, an assert catches but the buffer contents are -* undefined. -* Copying stops if either: -* o the end of the 802.3 frame is reached -* o the Descriptor with a NULL pointer in the next_desc_addr field is reached -* -* When the copying stops, the receiver is ack'ed, thus freeing the NIC memory where the frame is stored -* As a consequence, hcf_rcv_msg can only be called once for any particular Rx frame. -* -* For the time being (PCI Bus mastering not yet supported), only the following fields of each -* of the descriptors in the descriptor list must be set by the MSF: -* o buf_cntl.buf_dim[1] -* o *next_desc_addr -* o *buf_addr -* At return from hcf_rcv_msg, the field buf_cntl.buf_dim[0] of the used Descriptors reflects -* the number of bytes in the buffer corresponding with the Descriptor. -* On the last used Descriptor, buf_cntl.buf_dim[0] is less or equal to buf_cntl.buf_dim[1]. -* On all preceding Descriptors buf_cntl.buf_dim[0] is equal to buf_cntl.buf_dim[1]. -* On all succeeding (unused) Descriptors, buf_cntl.buf_dim[0] is zero. -* Note: this I/F is based on the assumptions how the I/F needed for PCI Bus mastering will -* be, so it may change. -* -* The most likely handling of HCF_ERR_NO_NIC by the MSF is to drop the already copied -* data as elegantly as possible under the constraints and requirements posed by the (N)OS. -* If no received Frame Structure is pending, "Success" rather than "Read error" is returned. -* This error constitutes a logic flaw in the MSF -* The HCF can only catch a minority of this -* type of errors -* Based on consistency ideas, the HCF catches none of these errors. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value -* - there is no unacknowledged Rx-message available -* - offset is out of range (outside look ahead buffer) -* - descp is a NULL pointer -* - any of the descriptors is not double word aligned -* - reentrancy, may be caused by calling hcf_functions without adequate protection -* against NIC interrupts or multi-threading. -* - Interrupts are enabled. -* -*.DIAGRAM -* -*.NOTICE -* - by using unsigned int as type for offset, no need to worry about negative offsets -* - Asserting on being enabled/present is superfluous, since a non-zero IFB_lal implies that hcf_service_nic -* was called and detected a Rx-message. A zero IFB_lal will set the BUF_CNT field of at least the first -* descriptor to zero. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE int hcf_rcv_msg( IFBP ifbp, DESC_STRCT *descp, unsigned int offset ) + *.PURPOSE All: decapsulate a message. + * pre-HermesII.5: verify MIC. + * non-USB, non-DMA mode: Transfer a message from the NIC to the Host and acknowledge reception. + * USB: Transform a message from proprietary USB format to 802.3 format + * + *.ARGUMENTS + * ifbp address of the Interface Block + * descp Pointer to the Descriptor List location. + * offset USB: not used + * non-USB: specifies the beginning of the data to be obtained (0 corresponds with DestAddr field + * of frame). + * + *.RETURNS + * HCF_SUCCESS No SSN error ( or HCF_ERR_MIC already reported by hcf_service_nic) + * HCF_ERR_MIC message contains an erroneous MIC ( HCF_SUCCESS is reported if HCF_ERR_MIC is already + * reported by hcf_service_nic) + * HCF_ERR_NO_NIC NIC removed during data retrieval + * HCF_ERR_DEFUNCT... + * + *.DESCRIPTION + * The Receive Message Function can be executed by the MSF to obtain the Data Info fields of the message that + * is reported to be available by the Service NIC Function. + * + * The Receive Message Function copies the message data available in the Card memory into a buffer structure + * provided by the MSF. + * Only data of the message indicated by the Service NIC Function can be obtained. + * Execution of the Service NIC function may result in the availability of a new message, but it definitely + * makes the message reported by the preceding Service NIC function, unavailable. + * + * in non-USB/non-DMA mode, hcf_rcv_msg starts the copy process at the (non-negative) offset requested by the + * parameter offset, relative to HFS_ADDR_DEST, e.g offset 0 starts copying from the Destination Address, the + * very begin of the 802.3 frame message. Offset must either lay within the part of the 802.3 frame as stored + * by hcf_service_nic in the lookahead buffer or be just behind it, i.e. the first byte not yet read. + * When offset is within lookahead, data is copied from lookahead. + * When offset is beyond lookahead, data is read directly from RxFS in NIC with disregard of the actual value + * of offset + * + *.NOTICE: + * o at entry: look ahead buffer as passed with hcf_service_nic is still accessible and unchanged + * o at exit: Receive Frame in NIC memory is released + * + * Description: + * Starting at the byte indicated by the Offset value, the bytes are copied from the Data Info + * Part of the current Receive Frame Structure to the Host memory data buffer structure + * identified by descp. + * The maximum value for Offset is the number of characters of the 802.3 frame read into the + * look ahead buffer by hcf_service_nic (i.e. the look ahead buffer size minus + * Control and 802.11 fields) + * If Offset is less than the maximum value, copying starts from the look ahead buffer till the + * end of that buffer is reached + * Then (or if the maximum value is specified for Offset), the + * message is directly copied from NIC memory to Host memory. + * If an invalid (i.e. too large) offset is specified, an assert catches but the buffer contents are + * undefined. + * Copying stops if either: + * o the end of the 802.3 frame is reached + * o the Descriptor with a NULL pointer in the next_desc_addr field is reached + * + * When the copying stops, the receiver is ack'ed, thus freeing the NIC memory where the frame is stored + * As a consequence, hcf_rcv_msg can only be called once for any particular Rx frame. + * + * For the time being (PCI Bus mastering not yet supported), only the following fields of each + * of the descriptors in the descriptor list must be set by the MSF: + * o buf_cntl.buf_dim[1] + * o *next_desc_addr + * o *buf_addr + * At return from hcf_rcv_msg, the field buf_cntl.buf_dim[0] of the used Descriptors reflects + * the number of bytes in the buffer corresponding with the Descriptor. + * On the last used Descriptor, buf_cntl.buf_dim[0] is less or equal to buf_cntl.buf_dim[1]. + * On all preceding Descriptors buf_cntl.buf_dim[0] is equal to buf_cntl.buf_dim[1]. + * On all succeeding (unused) Descriptors, buf_cntl.buf_dim[0] is zero. + * Note: this I/F is based on the assumptions how the I/F needed for PCI Bus mastering will + * be, so it may change. + * + * The most likely handling of HCF_ERR_NO_NIC by the MSF is to drop the already copied + * data as elegantly as possible under the constraints and requirements posed by the (N)OS. + * If no received Frame Structure is pending, "Success" rather than "Read error" is returned. + * This error constitutes a logic flaw in the MSF + * The HCF can only catch a minority of this + * type of errors + * Based on consistency ideas, the HCF catches none of these errors. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value + * - there is no unacknowledged Rx-message available + * - offset is out of range (outside look ahead buffer) + * - descp is a NULL pointer + * - any of the descriptors is not double word aligned + * - reentrancy, may be caused by calling hcf_functions without adequate protection + * against NIC interrupts or multi-threading. + * - Interrupts are enabled. + * + *.DIAGRAM + * + *.NOTICE + * - by using unsigned int as type for offset, no need to worry about negative offsets + * - Asserting on being enabled/present is superfluous, since a non-zero IFB_lal implies that hcf_service_nic + * was called and detected a Rx-message. A zero IFB_lal will set the BUF_CNT field of at least the first + * descriptor to zero. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int hcf_rcv_msg( IFBP ifbp, DESC_STRCT *descp, unsigned int offset ) { -int rc = HCF_SUCCESS; -wci_bufp cp; //char oriented working pointer -hcf_16 i; -int tot_len = ifbp->IFB_RxLen - offset; //total length -wci_bufp lap = ifbp->IFB_lap + offset; //start address in LookAhead Buffer -hcf_16 lal = ifbp->IFB_lal - offset; //available data within LookAhead Buffer -hcf_16 j; + int rc = HCF_SUCCESS; + wci_bufp cp; //char oriented working pointer + hcf_16 i; + int tot_len = ifbp->IFB_RxLen - offset; //total length + wci_bufp lap = ifbp->IFB_lap + offset; //start address in LookAhead Buffer + hcf_16 lal = ifbp->IFB_lal - offset; //available data within LookAhead Buffer + hcf_16 j; HCFLOGENTRY( HCF_TRACE_RCV_MSG, offset ); HCFASSERT( ifbp->IFB_Magic == HCF_MAGIC, ifbp->IFB_Magic ); @@ -2458,34 +2458,34 @@ hcf_16 j; HCFASSERT( (ifbp->IFB_CntlOpt & USE_DMA) == 0, 0xDADA ); if ( tot_len < 0 ) { - lal = 0; tot_len = 0; //suppress all copying activity in the do--while loop + lal = 0; tot_len = 0; //suppress all copying activity in the do--while loop } - do { //loop over all available fragments + do { //loop over all available fragments // obnoxious hcf.c(1480) : warning C4769: conversion of near pointer to long integer HCFASSERT( ((hcf_32)descp & 3 ) == 0, (hcf_32)descp ); cp = descp->buf_addr; - j = min( (hcf_16)tot_len, descp->BUF_SIZE ); //minimum of "what's` available" and fragment size + j = min( (hcf_16)tot_len, descp->BUF_SIZE ); //minimum of "what's` available" and fragment size descp->BUF_CNT = j; - tot_len -= j; //adjust length still to go - if ( lal ) { //if lookahead Buffer not yet completely copied - i = min( lal, j ); //minimum of "what's available" in LookAhead and fragment size - lal -= i; //adjust length still available in LookAhead - j -= i; //adjust length still available in current fragment + tot_len -= j; //adjust length still to go + if ( lal ) { //if lookahead Buffer not yet completely copied + i = min( lal, j ); //minimum of "what's available" in LookAhead and fragment size + lal -= i; //adjust length still available in LookAhead + j -= i; //adjust length still available in current fragment /*;? while loop could be improved by moving words but that is complicated on platforms with * alignment requirements*/ while ( i-- ) *cp++ = *lap++; } - if ( j ) { //if LookAhead Buffer exhausted but still space in fragment, copy directly from NIC RAM + if ( j ) { //if LookAhead Buffer exhausted but still space in fragment, copy directly from NIC RAM get_frag( ifbp, cp, j BE_PAR(0) ); CALC_RX_MIC( cp, j ); } } while ( ( descp = descp->next_desc_addr ) != NULL ); #if (HCF_TYPE) & HCF_TYPE_WPA if ( ifbp->IFB_RxFID ) { - rc = check_mic( ifbp ); //prevents MIC error report if hcf_service_nic already consumed all + rc = check_mic( ifbp ); //prevents MIC error report if hcf_service_nic already consumed all } #endif // HCF_TYPE_WPA - (void)hcf_action( ifbp, HCF_ACT_RX_ACK ); //only 1 shot to get the data, so free the resources in the NIC + (void)hcf_action( ifbp, HCF_ACT_RX_ACK ); //only 1 shot to get the data, so free the resources in the NIC HCFASSERT( rc == HCF_SUCCESS, rc ); HCFLOGEXIT( HCF_TRACE_RCV_MSG ); return rc; @@ -2495,168 +2495,168 @@ hcf_16 j; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.MODULE int hcf_send_msg( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) -*.PURPOSE Encapsulate a message and append padding and MIC. -* non-USB: Transfers the resulting message from Host to NIC and initiates transmission. -* USB: Transfer resulting message into a flat buffer. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* descp pointer to the DescriptorList or NULL -* tx_cntl indicates MAC-port and (Hermes) options -* HFS_TX_CNTL_SPECTRALINK -* HFS_TX_CNTL_PRIO -* HFS_TX_CNTL_TX_OK -* HFS_TX_CNTL_TX_EX -* HFS_TX_CNTL_TX_DELAY -* HFS_TX_CNTL_TX_CONT -* HCF_PORT_0 MAC Port 0 (default) -* HCF_PORT_1 (AP only) MAC Port 1 -* HCF_PORT_2 (AP only) MAC Port 2 -* HCF_PORT_3 (AP only) MAC Port 3 -* HCF_PORT_4 (AP only) MAC Port 4 -* HCF_PORT_5 (AP only) MAC Port 5 -* HCF_PORT_6 (AP only) MAC Port 6 -* -*.RETURNS -* HCF_SUCCESS -* HCF_ERR_DEFUNCT_.. -* HCF_ERR_TIME_OUT -* -*.DESCRIPTION: -* The Send Message Function embodies 2 functions: -* o transfers a message (including MAC header) from the provided buffer structure in Host memory to the Transmit -* Frame Structure (TxFS) in NIC memory. -* o Issue a send command to the F/W to actually transmit the contents of the TxFS. -* -* Control is based on the Resource Indicator IFB_RscInd. -* The Resource Indicator is maintained by the HCF and should only be interpreted but not changed by the MSF. -* The MSF must check IFB_RscInd to be non-zero before executing the call to the Send Message Function. -* When no resources are available, the MSF must handle the queuing of the Transmit frame and check the -* Resource Indicator periodically after calling hcf_service_nic. -* -* The Send Message Functions transfers a message to NIC memory when it is called with a non-NULL descp. -* Before the Send Message Function is invoked this way, the Resource Indicator (IFB_RscInd) must be checked. -* If the Resource is not available, Send Message Function execution must be postponed until after processing of -* a next hcf_service_nic it appears that the Resource has become available. -* The message is copied from the buffer structure identified by descp to the NIC. -* Copying stops if a NULL pointer in the next_desc_addr field is reached. -* Hcf_send_msg does not check for transmit buffer overflow, because the F/W does this protection. -* In case of a transmit buffer overflow, the surplus which does not fit in the buffer is simply dropped. -* -* The Send Message Function activates the F/W to actually send the message to the medium when the -* HFS_TX_CNTL_TX_DELAY bit of the tx_cntl parameter is not set. -* If the descp parameter of the current call is non-NULL, the message as represented by descp is send. -* If the descp parameter of the current call is NULL, and if the preceding call of the Send Message Function had -* a non-NULL descp and the preceding call had the HFS_TX_CNTL_TX_DELAY bit of tx_cntl set, then the message as -* represented by the descp of the preceding call is send. -* -* Hcf_send_msg supports encapsulation (see HCF_ENCAP) of Ethernet-II frames. -* An Ethernet-II frame is transferred to the Transmit Frame structure as an 802.3 frame. -* Hcf_send_msg distinguishes between an 802.3 and an Ethernet-II frame by looking at the data length/type field -* of the frame. If this field contains a value larger than 1514, the frame is considered to be an Ethernet-II -* frame, otherwise it is treated as an 802.3 frame. -* To ease implementation of the HCF, this type/type field must be located in the first descriptor structure, -* i.e. the 1st fragment must have a size of at least 14 (to contain DestAddr, SrcAddr and Len/Type field). -* An Ethernet-II frame is encapsulated by inserting a SNAP header between the addressing information and the -* type field. This insertion is transparent for the MSF. -* The HCF contains a fixed table that stores a number of types. If the value specified by the type/type field -* occurs in this table, Bridge Tunnel Encapsulation is used, otherwise RFC1042 encapsulation is used. -* Bridge Tunnel uses AA AA 03 00 00 F8 as SNAP header, -* RFC1042 uses AA AA 03 00 00 00 as SNAP header. -* The table currently contains: -* 0 0x80F3 AppleTalk Address Resolution Protocol (AARP) -* 0 0x8137 IPX -* -* The algorithm to distinguish between 802.3 and Ethernet-II frames limits the maximum length for frames of -* 802.3 frames to 1514 bytes. -* Encapsulation can be suppressed by means of the system constant HCF_ENCAP, e.g. to support proprietary -* protocols with 802.3 like frames with a size larger than 1514 bytes. -* -* In case the HCF encapsulates the frame, the number of bytes that is actually transmitted is determined by the -* cumulative value of the buf_cntl.buf_dim[0] fields. -* In case the HCF does not encapsulate the frame, the number of bytes that is actually transmitted is not -* determined by the cumulative value of the buf_cntl.buf_dim[DESC_CNTL_CNT] fields of the desc_strct's but by -* the Length field of the 802.3 frame. -* If there is a conflict between the cumulative value of the buf_cntl.buf_dim[0] fields and the -* 802.3 Length field the 802.3 Length field determines the number of bytes actually transmitted by the NIC while -* the cumulative value of the buf_cntl.buf_dim[0] fields determines the position of the MIC, hence a mismatch -* will result in MIC errors on the Receiving side. -* Currently this problem is flagged on the Transmit side by an Assert. -* The following fields of each of the descriptors in the descriptor list must be set by the MSF: -* o buf_cntl.buf_dim[0] -* o *next_desc_addr -* o *buf_addr -* -* All bits of the tx_cntl parameter except HFS_TX_CNTL_TX_DELAY and the HCF_PORT# bits are passed to the F/W via -* the HFS_TX_CNTL field of the TxFS. -* -* Note that hcf_send_msg does not detect NIC absence. The MSF is supposed to have its own -platform dependent- -* way to recognize card removal/insertion. -* The total system must be robust against card removal and there is no principal difference between card removal -* just after hcf_send_msg returns but before the actual transmission took place or sometime earlier. -* -* Assert fails if -* - ifbp has a recognizable out-of-range value -* - descp is a NULL pointer -* - no resources for PIF available. -* - Interrupts are enabled. -* - reentrancy, may be caused by calling hcf_functions without adequate protection -* against NIC interrupts or multi-threading. -* -*.DIAGRAM -*4: for the normal case (i.e. no HFS_TX_CNTL_TX_DELAY option active), a fid is acquired via the -* routine get_fid. If no FID is acquired, the remainder is skipped without an error notification. After -* all, the MSF is not supposed to call hcf_send_msg when no Resource is available. -*7: The ControlField of the TxFS is written. Since put_frag can only return the fatal Defunct or "No NIC", the -* return status can be ignored because when it fails, cmd_wait will fail as well. (see also the note on the -* need for a return code below). -* Note that HFS_TX_CNTL has different values for H-I, H-I/SSN and H-II and HFS_ADDR_DEST has different -* values for H-I (regardless of SSN) and H-II. -* By writing 17, 1 or 2 ( implying 16, 0 or 1 garbage word after HFS_TX_CNTL) the BAP just gets to -* HFS_ADDR_DEST for H-I, H-I/SSN and H-II respectively. -*10: if neither encapsulation nor MIC calculation is needed, splitting the first fragment in two does not -* really help but it makes the flow easier to follow to do not optimize on this difference -* -* hcf_send_msg checks whether the frame is an Ethernet-II rather than an "official" 802.3 frame. -* The E-II check is based on the length/type field in the MAC header. If this field has a value larger than -* 1500, E-II is assumed. The implementation of this test fails if the length/type field is not in the first -* descriptor. If E-II is recognized, a SNAP header is inserted. This SNAP header represents either RFC1042 -* or Bridge-Tunnel encapsulation, depending on the return status of the support routine hcf_encap. -* -*.NOTICE -* hcf_send_msg leaves the responsibility to only send messages on enabled ports at the MSF level. -* This is considered the strategy which is sufficiently adequate for all "robust" MSFs, have the least -* processor utilization and being still acceptable robust at the WCI !!!!! -* -* hcf_send_msg does not NEED a return value to report NIC absence or removal during the execution of -* hcf_send_msg(), because the MSF and higher layers must be able to cope anyway with the NIC being removed -* after a successful completion of hcf_send_msg() but before the actual transmission took place. -* To accommodate user expectations the current implementation does report NIC absence. -* Defunct blocks all NIC access and will (also) be reported on a number of other calls. -* -* hcf_send_msg does not check for transmit buffer overflow because the Hermes does this protection. -* In case of a transmit buffer overflow, the surplus which does not fit in the buffer is simply dropped. -* Note that this possibly results in the transmission of incomplete frames. -* -* After some deliberation with F/W team, it is decided that - being in the twilight zone of not knowing -* whether the problem at hand is an MSF bug, HCF buf, F/W bug, H/W malfunction or even something else - there -* is no "best thing to do" in case of a failing send, hence the HCF considers the TxFID ownership to be taken -* over by the F/W and hopes for an Allocate event in due time -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.MODULE int hcf_send_msg( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) + *.PURPOSE Encapsulate a message and append padding and MIC. + * non-USB: Transfers the resulting message from Host to NIC and initiates transmission. + * USB: Transfer resulting message into a flat buffer. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * descp pointer to the DescriptorList or NULL + * tx_cntl indicates MAC-port and (Hermes) options + * HFS_TX_CNTL_SPECTRALINK + * HFS_TX_CNTL_PRIO + * HFS_TX_CNTL_TX_OK + * HFS_TX_CNTL_TX_EX + * HFS_TX_CNTL_TX_DELAY + * HFS_TX_CNTL_TX_CONT + * HCF_PORT_0 MAC Port 0 (default) + * HCF_PORT_1 (AP only) MAC Port 1 + * HCF_PORT_2 (AP only) MAC Port 2 + * HCF_PORT_3 (AP only) MAC Port 3 + * HCF_PORT_4 (AP only) MAC Port 4 + * HCF_PORT_5 (AP only) MAC Port 5 + * HCF_PORT_6 (AP only) MAC Port 6 + * + *.RETURNS + * HCF_SUCCESS + * HCF_ERR_DEFUNCT_.. + * HCF_ERR_TIME_OUT + * + *.DESCRIPTION: + * The Send Message Function embodies 2 functions: + * o transfers a message (including MAC header) from the provided buffer structure in Host memory to the Transmit + * Frame Structure (TxFS) in NIC memory. + * o Issue a send command to the F/W to actually transmit the contents of the TxFS. + * + * Control is based on the Resource Indicator IFB_RscInd. + * The Resource Indicator is maintained by the HCF and should only be interpreted but not changed by the MSF. + * The MSF must check IFB_RscInd to be non-zero before executing the call to the Send Message Function. + * When no resources are available, the MSF must handle the queuing of the Transmit frame and check the + * Resource Indicator periodically after calling hcf_service_nic. + * + * The Send Message Functions transfers a message to NIC memory when it is called with a non-NULL descp. + * Before the Send Message Function is invoked this way, the Resource Indicator (IFB_RscInd) must be checked. + * If the Resource is not available, Send Message Function execution must be postponed until after processing of + * a next hcf_service_nic it appears that the Resource has become available. + * The message is copied from the buffer structure identified by descp to the NIC. + * Copying stops if a NULL pointer in the next_desc_addr field is reached. + * Hcf_send_msg does not check for transmit buffer overflow, because the F/W does this protection. + * In case of a transmit buffer overflow, the surplus which does not fit in the buffer is simply dropped. + * + * The Send Message Function activates the F/W to actually send the message to the medium when the + * HFS_TX_CNTL_TX_DELAY bit of the tx_cntl parameter is not set. + * If the descp parameter of the current call is non-NULL, the message as represented by descp is send. + * If the descp parameter of the current call is NULL, and if the preceding call of the Send Message Function had + * a non-NULL descp and the preceding call had the HFS_TX_CNTL_TX_DELAY bit of tx_cntl set, then the message as + * represented by the descp of the preceding call is send. + * + * Hcf_send_msg supports encapsulation (see HCF_ENCAP) of Ethernet-II frames. + * An Ethernet-II frame is transferred to the Transmit Frame structure as an 802.3 frame. + * Hcf_send_msg distinguishes between an 802.3 and an Ethernet-II frame by looking at the data length/type field + * of the frame. If this field contains a value larger than 1514, the frame is considered to be an Ethernet-II + * frame, otherwise it is treated as an 802.3 frame. + * To ease implementation of the HCF, this type/type field must be located in the first descriptor structure, + * i.e. the 1st fragment must have a size of at least 14 (to contain DestAddr, SrcAddr and Len/Type field). + * An Ethernet-II frame is encapsulated by inserting a SNAP header between the addressing information and the + * type field. This insertion is transparent for the MSF. + * The HCF contains a fixed table that stores a number of types. If the value specified by the type/type field + * occurs in this table, Bridge Tunnel Encapsulation is used, otherwise RFC1042 encapsulation is used. + * Bridge Tunnel uses AA AA 03 00 00 F8 as SNAP header, + * RFC1042 uses AA AA 03 00 00 00 as SNAP header. + * The table currently contains: + * 0 0x80F3 AppleTalk Address Resolution Protocol (AARP) + * 0 0x8137 IPX + * + * The algorithm to distinguish between 802.3 and Ethernet-II frames limits the maximum length for frames of + * 802.3 frames to 1514 bytes. + * Encapsulation can be suppressed by means of the system constant HCF_ENCAP, e.g. to support proprietary + * protocols with 802.3 like frames with a size larger than 1514 bytes. + * + * In case the HCF encapsulates the frame, the number of bytes that is actually transmitted is determined by the + * cumulative value of the buf_cntl.buf_dim[0] fields. + * In case the HCF does not encapsulate the frame, the number of bytes that is actually transmitted is not + * determined by the cumulative value of the buf_cntl.buf_dim[DESC_CNTL_CNT] fields of the desc_strct's but by + * the Length field of the 802.3 frame. + * If there is a conflict between the cumulative value of the buf_cntl.buf_dim[0] fields and the + * 802.3 Length field the 802.3 Length field determines the number of bytes actually transmitted by the NIC while + * the cumulative value of the buf_cntl.buf_dim[0] fields determines the position of the MIC, hence a mismatch + * will result in MIC errors on the Receiving side. + * Currently this problem is flagged on the Transmit side by an Assert. + * The following fields of each of the descriptors in the descriptor list must be set by the MSF: + * o buf_cntl.buf_dim[0] + * o *next_desc_addr + * o *buf_addr + * + * All bits of the tx_cntl parameter except HFS_TX_CNTL_TX_DELAY and the HCF_PORT# bits are passed to the F/W via + * the HFS_TX_CNTL field of the TxFS. + * + * Note that hcf_send_msg does not detect NIC absence. The MSF is supposed to have its own -platform dependent- + * way to recognize card removal/insertion. + * The total system must be robust against card removal and there is no principal difference between card removal + * just after hcf_send_msg returns but before the actual transmission took place or sometime earlier. + * + * Assert fails if + * - ifbp has a recognizable out-of-range value + * - descp is a NULL pointer + * - no resources for PIF available. + * - Interrupts are enabled. + * - reentrancy, may be caused by calling hcf_functions without adequate protection + * against NIC interrupts or multi-threading. + * + *.DIAGRAM + *4: for the normal case (i.e. no HFS_TX_CNTL_TX_DELAY option active), a fid is acquired via the + * routine get_fid. If no FID is acquired, the remainder is skipped without an error notification. After + * all, the MSF is not supposed to call hcf_send_msg when no Resource is available. + *7: The ControlField of the TxFS is written. Since put_frag can only return the fatal Defunct or "No NIC", the + * return status can be ignored because when it fails, cmd_wait will fail as well. (see also the note on the + * need for a return code below). + * Note that HFS_TX_CNTL has different values for H-I, H-I/SSN and H-II and HFS_ADDR_DEST has different + * values for H-I (regardless of SSN) and H-II. + * By writing 17, 1 or 2 ( implying 16, 0 or 1 garbage word after HFS_TX_CNTL) the BAP just gets to + * HFS_ADDR_DEST for H-I, H-I/SSN and H-II respectively. + *10: if neither encapsulation nor MIC calculation is needed, splitting the first fragment in two does not + * really help but it makes the flow easier to follow to do not optimize on this difference + * + * hcf_send_msg checks whether the frame is an Ethernet-II rather than an "official" 802.3 frame. + * The E-II check is based on the length/type field in the MAC header. If this field has a value larger than + * 1500, E-II is assumed. The implementation of this test fails if the length/type field is not in the first + * descriptor. If E-II is recognized, a SNAP header is inserted. This SNAP header represents either RFC1042 + * or Bridge-Tunnel encapsulation, depending on the return status of the support routine hcf_encap. + * + *.NOTICE + * hcf_send_msg leaves the responsibility to only send messages on enabled ports at the MSF level. + * This is considered the strategy which is sufficiently adequate for all "robust" MSFs, have the least + * processor utilization and being still acceptable robust at the WCI !!!!! + * + * hcf_send_msg does not NEED a return value to report NIC absence or removal during the execution of + * hcf_send_msg(), because the MSF and higher layers must be able to cope anyway with the NIC being removed + * after a successful completion of hcf_send_msg() but before the actual transmission took place. + * To accommodate user expectations the current implementation does report NIC absence. + * Defunct blocks all NIC access and will (also) be reported on a number of other calls. + * + * hcf_send_msg does not check for transmit buffer overflow because the Hermes does this protection. + * In case of a transmit buffer overflow, the surplus which does not fit in the buffer is simply dropped. + * Note that this possibly results in the transmission of incomplete frames. + * + * After some deliberation with F/W team, it is decided that - being in the twilight zone of not knowing + * whether the problem at hand is an MSF bug, HCF buf, F/W bug, H/W malfunction or even something else - there + * is no "best thing to do" in case of a failing send, hence the HCF considers the TxFID ownership to be taken + * over by the F/W and hopes for an Allocate event in due time + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int hcf_send_msg( IFBP ifbp, DESC_STRCT *descp, hcf_16 tx_cntl ) { -int rc = HCF_SUCCESS; -DESC_STRCT *p /* = descp*/; //working pointer -hcf_16 len; // total byte count -hcf_16 i; + int rc = HCF_SUCCESS; + DESC_STRCT *p /* = descp*/; //working pointer + hcf_16 len; // total byte count + hcf_16 i; -hcf_16 fid = 0; + hcf_16 fid = 0; HCFASSERT( ifbp->IFB_RscInd || descp == NULL, ifbp->IFB_RscInd ); HCFASSERT( (ifbp->IFB_CntlOpt & USE_DMA) == 0, 0xDADB ); @@ -2668,22 +2668,22 @@ hcf_16 fid = 0; * so skip */ HCFASSERT( ((hcf_32)descp & 3 ) == 0, (hcf_32)descp ); #if HCF_ASSERT -{ int x = ifbp->IFB_FWIdentity.comp_id == COMP_ID_FW_AP ? tx_cntl & ~HFS_TX_CNTL_PORT : tx_cntl; - HCFASSERT( (x & ~HCF_TX_CNTL_MASK ) == 0, tx_cntl ); -} + { int x = ifbp->IFB_FWIdentity.comp_id == COMP_ID_FW_AP ? tx_cntl & ~HFS_TX_CNTL_PORT : tx_cntl; + HCFASSERT( (x & ~HCF_TX_CNTL_MASK ) == 0, tx_cntl ); + } #endif // HCF_ASSERT - if ( descp ) ifbp->IFB_TxFID = 0; //cancel a pre-put message + if ( descp ) ifbp->IFB_TxFID = 0; //cancel a pre-put message -#if (HCF_EXT) & HCF_EXT_TX_CONT // Continuous transmit test +#if (HCF_EXT) & HCF_EXT_TX_CONT // Continuous transmit test if ( tx_cntl == HFS_TX_CNTL_TX_CONT ) { - fid = get_fid(ifbp); - if (fid != 0 ) { - //setup BAP to begin of TxFS + fid = get_fid(ifbp); + if (fid != 0 ) { + //setup BAP to begin of TxFS (void)setup_bap( ifbp, fid, 0, IO_OUT ); - //copy all the fragments in a transparent fashion - for ( p = descp; p; p = p->next_desc_addr ) { - /* obnoxious warning C4769: conversion of near pointer to long integer */ + //copy all the fragments in a transparent fashion + for ( p = descp; p; p = p->next_desc_addr ) { + /* obnoxious warning C4769: conversion of near pointer to long integer */ HCFASSERT( ((hcf_32)p & 3 ) == 0, (hcf_32)p ); put_frag( ifbp, p->buf_addr, p->BUF_CNT BE_PAR(0) ); } @@ -2692,79 +2692,79 @@ hcf_16 fid = 0; ifbp->IFB_RscInd = get_fid( ifbp ); } } - // een slecht voorbeeld doet goed volgen ;? + // een slecht voorbeeld doet goed volgen ;? HCFLOGEXIT( HCF_TRACE_SEND_MSG ); return rc; } #endif // HCF_EXT_TX_CONT - /* the following initialization code is redundant for a pre-put message - * but moving it inside the "if fid" logic makes the merging with the - * USB flow awkward - */ + /* the following initialization code is redundant for a pre-put message + * but moving it inside the "if fid" logic makes the merging with the + * USB flow awkward + */ #if (HCF_TYPE) & HCF_TYPE_WPA tx_cntl |= ifbp->IFB_MICTxCntl; #endif // HCF_TYPE_WPA fid = ifbp->IFB_TxFID; - if (fid == 0 && ( fid = get_fid( ifbp ) ) != 0 ) /* 4 */ - /* skip the next compound statement if: - - pre-put message or - - no fid available (which should never occur if the MSF adheres to the WCI) - */ - { // to match the closing curly bracket of above "if" in case of HCF_TYPE_USB - //calculate total length ;? superfluous unless CCX or Encapsulation + if (fid == 0 && ( fid = get_fid( ifbp ) ) != 0 ) /* 4 */ + /* skip the next compound statement if: + - pre-put message or + - no fid available (which should never occur if the MSF adheres to the WCI) + */ + { // to match the closing curly bracket of above "if" in case of HCF_TYPE_USB + //calculate total length ;? superfluous unless CCX or Encapsulation len = 0; p = descp; do len += p->BUF_CNT; while ( ( p = p->next_desc_addr ) != NULL ); p = descp; -//;? HCFASSERT( len <= HCF_MAX_MSG, len ); -/*7*/ (void)setup_bap( ifbp, fid, HFS_TX_CNTL, IO_OUT ); +//;? HCFASSERT( len <= HCF_MAX_MSG, len ); + /*7*/ (void)setup_bap( ifbp, fid, HFS_TX_CNTL, IO_OUT ); #if (HCF_TYPE) & HCF_TYPE_TX_DELAY HCFASSERT( ( descp != NULL ) ^ ( tx_cntl & HFS_TX_CNTL_TX_DELAY ), tx_cntl ); if ( tx_cntl & HFS_TX_CNTL_TX_DELAY ) { - tx_cntl &= ~HFS_TX_CNTL_TX_DELAY; //!!HFS_TX_CNTL_TX_DELAY no longer available + tx_cntl &= ~HFS_TX_CNTL_TX_DELAY; //!!HFS_TX_CNTL_TX_DELAY no longer available ifbp->IFB_TxFID = fid; - fid = 0; //!!fid no longer available, be careful when modifying code + fid = 0; //!!fid no longer available, be careful when modifying code } #endif // HCF_TYPE_TX_DELAY OPW( HREG_DATA_1, tx_cntl ) ; OPW( HREG_DATA_1, 0 ); #if ! ( (HCF_TYPE) & HCF_TYPE_CCX ) HCFASSERT( p->BUF_CNT >= 14, p->BUF_CNT ); - /* assume DestAddr/SrcAddr/Len/Type ALWAYS contained in 1st fragment - * otherwise life gets too cumbersome for MIC and Encapsulation !!!!!!!! - if ( p->BUF_CNT >= 14 ) { alternatively: add a safety escape !!!!!!!!!!!! } */ + /* assume DestAddr/SrcAddr/Len/Type ALWAYS contained in 1st fragment + * otherwise life gets too cumbersome for MIC and Encapsulation !!!!!!!! + if ( p->BUF_CNT >= 14 ) { alternatively: add a safety escape !!!!!!!!!!!! } */ #endif // HCF_TYPE_CCX - CALC_TX_MIC( NULL, -1 ); //initialize MIC -/*10*/ put_frag( ifbp, p->buf_addr, HCF_DASA_SIZE BE_PAR(0) ); //write DA, SA with MIC calculation - CALC_TX_MIC( p->buf_addr, HCF_DASA_SIZE ); //MIC over DA, SA - CALC_TX_MIC( null_addr, 4 ); //MIC over (virtual) priority field + CALC_TX_MIC( NULL, -1 ); //initialize MIC + /*10*/ put_frag( ifbp, p->buf_addr, HCF_DASA_SIZE BE_PAR(0) ); //write DA, SA with MIC calculation + CALC_TX_MIC( p->buf_addr, HCF_DASA_SIZE ); //MIC over DA, SA + CALC_TX_MIC( null_addr, 4 ); //MIC over (virtual) priority field #if (HCF_TYPE) & HCF_TYPE_CCX //!!be careful do not use positive test on HCF_ACT_CCX_OFF, because IFB_CKIPStat is initially 0 if(( ifbp->IFB_CKIPStat == HCF_ACT_CCX_ON ) || - ((GET_BUF_CNT(p) >= 20 ) && ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) && - (p->buf_addr[12] == 0xAA) && (p->buf_addr[13] == 0xAA) && - (p->buf_addr[14] == 0x03) && (p->buf_addr[15] == 0x00) && - (p->buf_addr[16] == 0x40) && (p->buf_addr[17] == 0x96) && - (p->buf_addr[18] == 0x00) && (p->buf_addr[19] == 0x00))) - { - i = HCF_DASA_SIZE; + ((GET_BUF_CNT(p) >= 20 ) && ( ifbp->IFB_CKIPStat == HCF_ACT_CCX_OFF ) && + (p->buf_addr[12] == 0xAA) && (p->buf_addr[13] == 0xAA) && + (p->buf_addr[14] == 0x03) && (p->buf_addr[15] == 0x00) && + (p->buf_addr[16] == 0x40) && (p->buf_addr[17] == 0x96) && + (p->buf_addr[18] == 0x00) && (p->buf_addr[19] == 0x00))) + { + i = HCF_DASA_SIZE; - OPW( HREG_DATA_1, CNV_SHORT_TO_BIG( len - i )); + OPW( HREG_DATA_1, CNV_SHORT_TO_BIG( len - i )); - /* need to send out the remainder of the fragment */ + /* need to send out the remainder of the fragment */ put_frag( ifbp, &p->buf_addr[i], GET_BUF_CNT(p) - i BE_PAR(0) ); - } - else + } + else #endif // HCF_TYPE_CCX { - //if encapsulation needed + //if encapsulation needed #if (HCF_ENCAP) == HCF_ENC - //write length (with SNAP-header,Type, without //DA,SA,Length ) no MIC calc. + //write length (with SNAP-header,Type, without //DA,SA,Length ) no MIC calc. if ( ( snap_header[sizeof(snap_header)-1] = hcf_encap( &p->buf_addr[HCF_DASA_SIZE] ) ) != ENC_NONE ) { OPW( HREG_DATA_1, CNV_END_SHORT( len + (sizeof(snap_header) + 2) - ( 2*6 + 2 ) ) ); - //write splice with MIC calculation + //write splice with MIC calculation put_frag( ifbp, snap_header, sizeof(snap_header) BE_PAR(0) ); - CALC_TX_MIC( snap_header, sizeof(snap_header) ); //MIC over 6 byte SNAP + CALC_TX_MIC( snap_header, sizeof(snap_header) ); //MIC over 6 byte SNAP i = HCF_DASA_SIZE; } else #endif // HCF_ENC @@ -2772,11 +2772,11 @@ hcf_16 fid = 0; OPW( HREG_DATA_1, *(wci_recordp)&p->buf_addr[HCF_DASA_SIZE] ); i = 14; } - //complete 1st fragment starting with Type with MIC calculation + //complete 1st fragment starting with Type with MIC calculation put_frag( ifbp, &p->buf_addr[i], p->BUF_CNT - i BE_PAR(0) ); CALC_TX_MIC( &p->buf_addr[i], p->BUF_CNT - i ); } - //do the remaining fragments with MIC calculation + //do the remaining fragments with MIC calculation while ( ( p = p->next_desc_addr ) != NULL ) { /* obnoxious c:/hcf/hcf.c(1480) : warning C4769: conversion of near pointer to long integer, * so skip */ @@ -2784,18 +2784,18 @@ hcf_16 fid = 0; put_frag( ifbp, p->buf_addr, p->BUF_CNT BE_PAR(0) ); CALC_TX_MIC( p->buf_addr, p->BUF_CNT ); } - //pad message, finalize MIC calculation and write MIC to NIC + //pad message, finalize MIC calculation and write MIC to NIC put_frag_finalize( ifbp ); } if ( fid ) { -/*16*/ rc = cmd_exe( ifbp, HCMD_BUSY | HCMD_TX | HCMD_RECL, fid ); + /*16*/ rc = cmd_exe( ifbp, HCMD_BUSY | HCMD_TX | HCMD_RECL, fid ); ifbp->IFB_TxFID = 0; - /* probably this (i.e. no RscInd AND "HREG_EV_ALLOC") at this point in time occurs so infrequent, - * that it might just as well be acceptable to skip this - * "optimization" code and handle that additional interrupt once in a while - */ + /* probably this (i.e. no RscInd AND "HREG_EV_ALLOC") at this point in time occurs so infrequent, + * that it might just as well be acceptable to skip this + * "optimization" code and handle that additional interrupt once in a while + */ // 180 degree error in logic ;? #if ALLOC_15 -/*20*/ if ( ifbp->IFB_RscInd == 0 ) { + /*20*/ if ( ifbp->IFB_RscInd == 0 ) { ifbp->IFB_RscInd = get_fid( ifbp ); } // #endif // ALLOC_15 @@ -2809,41 +2809,41 @@ hcf_16 fid = 0; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.MODULE int hcf_service_nic( IFBP ifbp, wci_bufp bufp, unsigned int len ) -*.PURPOSE Services (most) NIC events. -* Provides received message -* Provides status information. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* In non-DMA mode: -* bufp address of char buffer, sufficiently large to hold the first part of the RxFS up through HFS_TYPE -* len length in bytes of buffer specified by bufp -* value between HFS_TYPE + 2 and HFS_ADDR_DEST + HCF_MAX_MSG -* -*.RETURNS -* HCF_SUCCESS -* HCF_ERR_MIC message contains an erroneous MIC (only if frame fits completely in bufp) -* -*.DESCRIPTION -* -* MSF-accessible fields of Result Block -* - IFB_RxLen 0 or Frame size. -* - IFB_MBInfoLen 0 or the L-field of the oldest MBIB. -* - IFB_RscInd -* - IFB_HCF_Tallies updated if a corresponding event occurred. -* - IFB_NIC_Tallies updated if a Tally Info frame received from the NIC. -* - IFB_DmaPackets -* - IFB_TxFsStat -* - IFB_TxFsSwSup -* - IFB_LinkStat reflects new link status or 0x0000 if no change relative to previous hcf_service_nic call. + * + *.MODULE int hcf_service_nic( IFBP ifbp, wci_bufp bufp, unsigned int len ) + *.PURPOSE Services (most) NIC events. + * Provides received message + * Provides status information. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * In non-DMA mode: + * bufp address of char buffer, sufficiently large to hold the first part of the RxFS up through HFS_TYPE + * len length in bytes of buffer specified by bufp + * value between HFS_TYPE + 2 and HFS_ADDR_DEST + HCF_MAX_MSG + * + *.RETURNS + * HCF_SUCCESS + * HCF_ERR_MIC message contains an erroneous MIC (only if frame fits completely in bufp) + * + *.DESCRIPTION + * + * MSF-accessible fields of Result Block + * - IFB_RxLen 0 or Frame size. + * - IFB_MBInfoLen 0 or the L-field of the oldest MBIB. + * - IFB_RscInd + * - IFB_HCF_Tallies updated if a corresponding event occurred. + * - IFB_NIC_Tallies updated if a Tally Info frame received from the NIC. + * - IFB_DmaPackets + * - IFB_TxFsStat + * - IFB_TxFsSwSup + * - IFB_LinkStat reflects new link status or 0x0000 if no change relative to previous hcf_service_nic call. or -* - IFB_LinkStat link status, 0x8000 reflects change relative to previous hcf_service_nic call. +* - IFB_LinkStat link status, 0x8000 reflects change relative to previous hcf_service_nic call. * * When IFB_MBInfoLen is non-zero, at least one MBIB is available. * -* IFB_RxLen reflects the number of received bytes in 802.3 view (Including DestAddr, SrcAddr and Length, +* IFB_RxLen reflects the number of received bytes in 802.3 view (Including DestAddr, SrcAddr and Length, * excluding MIC-padding, MIC and sum check) of active Rx Frame Structure. If no Rx Data s available, IFB_RxLen * equals 0x0000. * Repeated execution causes the Service NIC Function to provide information about subsequently received @@ -2891,150 +2891,150 @@ or * specific requirements of that environment to translate the interrupt strategy to a polled strategy. * * hcf_service_nic services the following Hermes events: -* - HREG_EV_INFO Asynchronous Information Frame -* - HREG_EV_INFO_DROP WMAC did not have sufficient RAM to build Unsolicited Information Frame -* - HREG_EV_TX_EXC (if applicable, i.e. selected via HCF_EXT_INT_TX_EX bit of HCF_EXT) -* - HREG_EV_SLEEP_REQ (if applicable, i.e. selected via HCF_DDS/HCF_CDS bit of HCF_SLEEP) +* - HREG_EV_INFO Asynchronous Information Frame +* - HREG_EV_INFO_DROP WMAC did not have sufficient RAM to build Unsolicited Information Frame +* - HREG_EV_TX_EXC (if applicable, i.e. selected via HCF_EXT_INT_TX_EX bit of HCF_EXT) +* - HREG_EV_SLEEP_REQ (if applicable, i.e. selected via HCF_DDS/HCF_CDS bit of HCF_SLEEP) * ** in non_DMA mode -* - HREG_EV_ALLOC Asynchronous part of Allocation/Reclaim completed while out of resources at -* completion of hcf_send_msg/notify -* - HREG_EV_RX the detection of the availability of received messages -* including WaveLAN Management Protocol (WMP) message processing +* - HREG_EV_ALLOC Asynchronous part of Allocation/Reclaim completed while out of resources at +* completion of hcf_send_msg/notify +* - HREG_EV_RX the detection of the availability of received messages +* including WaveLAN Management Protocol (WMP) message processing * ** in DMA mode * - HREG_EV_RDMAD * - HREG_EV_TDMAD *!! hcf_service_nic does not service the following Hermes events: -*!! HREG_EV_TX (the "OK" Tx Event) is no longer supported by the WCI, if it occurs it is unclear -*!! what the cause is, so no meaningful strategy is available. Not acking the bit is -*!! probably the best help that can be given to the debugger. -*!! HREG_EV_CMD handled in cmd_wait. -*!! HREG_EV_FW_DMA (i.e. HREG_EV_RXDMA, HREG_EV_TXDMA and_EV_LPESC) are either not used or used -*!! between the F/W and the DMA engine. -*!! HREG_EV_ACK_REG_READY is only applicable for H-II (i.e. not HII.5 and up, see DAWA) -* -* If, in non-DMA mode, a Rx message is available, its length is reflected by the IFB_RxLen field of the IFB. -* This length reflects the data itself and the Destination Address, Source Address and DataLength/Type field -* but not the SNAP-header in case of decapsulation by the HCF. If no message is available, IFB_RxLen is -* zero. Former versions of the HCF handled WMP messages and supported a "monitor" mode in hcf_service_nic, -* which deposited certain or all Rx messages in the MailBox. The responsibility to handle these frames is -* moved to the MSF. The HCF offers as supports hcf_put_info with CFG_MB_INFO as parameter to emulate the old -* implementation under control of the MSF. +*!! HREG_EV_TX (the "OK" Tx Event) is no longer supported by the WCI, if it occurs it is unclear +*!! what the cause is, so no meaningful strategy is available. Not acking the bit is +*!! probably the best help that can be given to the debugger. +*!! HREG_EV_CMD handled in cmd_wait. +*!! HREG_EV_FW_DMA (i.e. HREG_EV_RXDMA, HREG_EV_TXDMA and_EV_LPESC) are either not used or used +*!! between the F/W and the DMA engine. +*!! HREG_EV_ACK_REG_READY is only applicable for H-II (i.e. not HII.5 and up, see DAWA) +* +* If, in non-DMA mode, a Rx message is available, its length is reflected by the IFB_RxLen field of the IFB. +* This length reflects the data itself and the Destination Address, Source Address and DataLength/Type field +* but not the SNAP-header in case of decapsulation by the HCF. If no message is available, IFB_RxLen is +* zero. Former versions of the HCF handled WMP messages and supported a "monitor" mode in hcf_service_nic, +* which deposited certain or all Rx messages in the MailBox. The responsibility to handle these frames is +* moved to the MSF. The HCF offers as supports hcf_put_info with CFG_MB_INFO as parameter to emulate the old +* implementation under control of the MSF. * * **Rx Buffer free strategy -* When hcf_service_nic reports the availability of a non-DMA message, the MSF can access that message by -* means of hcf_rcv_msg. It must be prevented that the LAN Controller writes new data in the NIC buffer -* before the MSF is finished with the current message. The NIC buffer is returned to the LAN Controller -* when: -* - the complete frame fits in the lookahead buffer or -* - hcf_rcv_msg is called or -* - hcf_action with HCF_ACT_RX is called or -* - hcf_service_nic is called again -* It can be reasoned that hcf_action( INT_ON ) should not be given before the MSF has completely processed -* a reported Rx-frame. The reason is that the INT_ON action is guaranteed to cause a (Rx-)interrupt (the -* MSF is processing a Rx-frame, hence the Rx-event bit in the Hermes register must be active). This -* interrupt will cause hcf_service_nic to be called, which will cause the ack-ing of the "last" Rx-event -* to the Hermes, causing the Hermes to discard the associated NIC RAM buffer. +* When hcf_service_nic reports the availability of a non-DMA message, the MSF can access that message by +* means of hcf_rcv_msg. It must be prevented that the LAN Controller writes new data in the NIC buffer +* before the MSF is finished with the current message. The NIC buffer is returned to the LAN Controller +* when: +* - the complete frame fits in the lookahead buffer or +* - hcf_rcv_msg is called or +* - hcf_action with HCF_ACT_RX is called or +* - hcf_service_nic is called again +* It can be reasoned that hcf_action( INT_ON ) should not be given before the MSF has completely processed +* a reported Rx-frame. The reason is that the INT_ON action is guaranteed to cause a (Rx-)interrupt (the +* MSF is processing a Rx-frame, hence the Rx-event bit in the Hermes register must be active). This +* interrupt will cause hcf_service_nic to be called, which will cause the ack-ing of the "last" Rx-event +* to the Hermes, causing the Hermes to discard the associated NIC RAM buffer. * Assert fails if * - ifbp is zero or other recognizable out-of-range value. * - hcf_service_nic is called without a prior call to hcf_connect. * - interrupts are enabled. * - reentrancy, may be caused by calling hcf_functions without adequate protection -* against NIC interrupts or multi-threading. +* against NIC interrupts or multi-threading. * * *.DIAGRAM -*1: IFB_LinkStat is cleared, if a LinkStatus frame is received, IFB_LinkStat will be updated accordingly -* by isr_info. +*1: IFB_LinkStat is cleared, if a LinkStatus frame is received, IFB_LinkStat will be updated accordingly +* by isr_info. or -*1: IFB_LinkStat change indication is cleared. If a LinkStatus frame is received, IFB_LinkStat will be updated -* accordingly by isr_info. +*1: IFB_LinkStat change indication is cleared. If a LinkStatus frame is received, IFB_LinkStat will be updated +* accordingly by isr_info. *2: IFB_RxLen must be cleared before the NIC presence check otherwise: -* - this value may stay non-zero if the NIC is pulled out at an inconvenient moment. -* - the RxAck on a zero-FID needs a zero-value for IFB_RxLen to work -* Note that as side-effect of the hcf_action call, the remainder of Rx related info is re-initialized as -* well. -*4: In case of Defunct mode, the information supplied by Hermes is unreliable, so the body of -* hcf_service_nic is skipped. Since hcf_cntl turns into a NOP if Primary or Station F/W is incompatible, -* hcf_service_nic is also skipped in those cases. -* To prevent that hcf_service_nic reports bogus information to the MSF with all - possibly difficult to -* debug - undesirable side effects, it is paramount to check the NIC presence. In former days the presence -* test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is chosen for strategy based on -* HREG_EV_STAT, this is now also used in hcf_service_nic. The motivation to change strategy is partly -* due to inconsistent F/W implementations with respect to HREG_SW_0 manipulation around reset and download. -* Note that in polled environments Card Removal is not detected by INT_OFF which makes the check in -* hcf_service_nic even more important. -*8: The event status register of the Hermes is sampled -* The assert checks for unexpected events ;?????????????????????????????????????. -* - HREG_EV_INFO_DROP is explicitly excluded from the acceptable HREG_EV_STAT bits because it indicates -* a too heavily loaded system. -* - HREG_EV_ACK_REG_READY is 0x0000 for H-I (and hopefully H-II.5) -* -* -* HREG_EV_TX_EXC is accepted (via HREG_EV_TX_EXT) if and only if HCF_EXT_INT_TX_EX set in the HCF_EXT -* definition at compile time. -* The following activities are handled: -* - Alloc events are handled by hcf_send_msg (and notify). Only if there is no "spare" resource, the -* alloc event is superficially serviced by hcf_service_nic to create a pseudo-resource with value -* 0x001. This value is recognized by get_fid (called by hcf_send_msg and notify) where the real -* TxFid is retrieved and the Hermes is acked and - hopefully - the "normal" case with a spare TxFid -* in IFB_RscInd is restored. -* - Info drop events are handled by incrementing a tally -* - LinkEvent (including solicited and unsolicited tallies) are handled by procedure isr_info. -* - TxEx (if selected at compile time) is handled by copying the significant part of the TxFS -* into the IFB for further processing by the MSF. -* Note the complication of the zero-FID protection sub-scheme in DAWA. -* Note, the Ack of all of above events is handled at the end of hcf_service_nic +* - this value may stay non-zero if the NIC is pulled out at an inconvenient moment. +* - the RxAck on a zero-FID needs a zero-value for IFB_RxLen to work +* Note that as side-effect of the hcf_action call, the remainder of Rx related info is re-initialized as +* well. +*4: In case of Defunct mode, the information supplied by Hermes is unreliable, so the body of +* hcf_service_nic is skipped. Since hcf_cntl turns into a NOP if Primary or Station F/W is incompatible, +* hcf_service_nic is also skipped in those cases. +* To prevent that hcf_service_nic reports bogus information to the MSF with all - possibly difficult to +* debug - undesirable side effects, it is paramount to check the NIC presence. In former days the presence +* test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is chosen for strategy based on +* HREG_EV_STAT, this is now also used in hcf_service_nic. The motivation to change strategy is partly +* due to inconsistent F/W implementations with respect to HREG_SW_0 manipulation around reset and download. +* Note that in polled environments Card Removal is not detected by INT_OFF which makes the check in +* hcf_service_nic even more important. +*8: The event status register of the Hermes is sampled +* The assert checks for unexpected events ;?????????????????????????????????????. +* - HREG_EV_INFO_DROP is explicitly excluded from the acceptable HREG_EV_STAT bits because it indicates +* a too heavily loaded system. +* - HREG_EV_ACK_REG_READY is 0x0000 for H-I (and hopefully H-II.5) +* +* +* HREG_EV_TX_EXC is accepted (via HREG_EV_TX_EXT) if and only if HCF_EXT_INT_TX_EX set in the HCF_EXT +* definition at compile time. +* The following activities are handled: +* - Alloc events are handled by hcf_send_msg (and notify). Only if there is no "spare" resource, the +* alloc event is superficially serviced by hcf_service_nic to create a pseudo-resource with value +* 0x001. This value is recognized by get_fid (called by hcf_send_msg and notify) where the real +* TxFid is retrieved and the Hermes is acked and - hopefully - the "normal" case with a spare TxFid +* in IFB_RscInd is restored. +* - Info drop events are handled by incrementing a tally +* - LinkEvent (including solicited and unsolicited tallies) are handled by procedure isr_info. +* - TxEx (if selected at compile time) is handled by copying the significant part of the TxFS +* into the IFB for further processing by the MSF. +* Note the complication of the zero-FID protection sub-scheme in DAWA. +* Note, the Ack of all of above events is handled at the end of hcf_service_nic *16: In case of non-DMA ( either not compiled in or due to a run-time choice): -* If an Rx-frame is available, first the FID of that frame is read, including the complication of the -* zero-FID protection sub-scheme in DAWA. Note that such a zero-FID is acknowledged at the end of -* hcf_service_nic and that this depends on the IFB_RxLen initialization in the begin of hcf_service_nic. -* The Assert validates the HCF assumption about Hermes implementation upon which the range of -* Pseudo-RIDs is based. -* Then the control fields up to the start of the 802.3 frame are read from the NIC into the lookahead buffer. -* The status field is converted to native Endianess. -* The length is, after implicit Endianess conversion if needed, and adjustment for the 14 bytes of the -* 802.3 MAC header, stored in IFB_RxLen. -* In MAC Monitor mode, 802.11 control frames with a TOTAL length of 14 are received, so without this -* length adjustment, IFB_RxLen could not be used to distinguish these frames from "no frame". -* No MIC calculation processes are associated with the reading of these Control fields. +* If an Rx-frame is available, first the FID of that frame is read, including the complication of the +* zero-FID protection sub-scheme in DAWA. Note that such a zero-FID is acknowledged at the end of +* hcf_service_nic and that this depends on the IFB_RxLen initialization in the begin of hcf_service_nic. +* The Assert validates the HCF assumption about Hermes implementation upon which the range of +* Pseudo-RIDs is based. +* Then the control fields up to the start of the 802.3 frame are read from the NIC into the lookahead buffer. +* The status field is converted to native Endianess. +* The length is, after implicit Endianess conversion if needed, and adjustment for the 14 bytes of the +* 802.3 MAC header, stored in IFB_RxLen. +* In MAC Monitor mode, 802.11 control frames with a TOTAL length of 14 are received, so without this +* length adjustment, IFB_RxLen could not be used to distinguish these frames from "no frame". +* No MIC calculation processes are associated with the reading of these Control fields. *26: This length test feels like superfluous robustness against malformed frames, but it turned out to be -* needed in the real (hostile) world. -* The decapsulation check needs sufficient data to represent DA, SA, L, SNAP and Type which amounts to -* 22 bytes. In MAC Monitor mode, 802.11 control frames with a smaller length are received. To prevent -* that the implementation goes haywire, a check on the length is needed. -* The actual decapsulation takes place on the fly in the copying process by overwriting the SNAP header. -* Note that in case of decapsulation the SNAP header is not passed to the MSF, hence IFB_RxLen must be -* compensated for the SNAP header length. -* The 22 bytes needed for decapsulation are (more than) sufficient for the exceptional handling of the -* MIC algorithm of the L-field (replacing the 2 byte L-field with 4 0x00 bytes). +* needed in the real (hostile) world. +* The decapsulation check needs sufficient data to represent DA, SA, L, SNAP and Type which amounts to +* 22 bytes. In MAC Monitor mode, 802.11 control frames with a smaller length are received. To prevent +* that the implementation goes haywire, a check on the length is needed. +* The actual decapsulation takes place on the fly in the copying process by overwriting the SNAP header. +* Note that in case of decapsulation the SNAP header is not passed to the MSF, hence IFB_RxLen must be +* compensated for the SNAP header length. +* The 22 bytes needed for decapsulation are (more than) sufficient for the exceptional handling of the +* MIC algorithm of the L-field (replacing the 2 byte L-field with 4 0x00 bytes). *30: The 12 in the no-SSN branch corresponds with the get_frag, the 2 with the IPW of the SSN branch *32: If Hermes reported MIC-presence, than the MIC engine is initialized with the non-dummy MIC calculation -* routine address and appropriate key. +* routine address and appropriate key. *34: The 8 bytes after the DA, SA, L are read and it is checked whether decapsulation is needed i.e.: -* - the Hermes reported Tunnel encapsulation or -* - the Hermes reported 1042 Encapsulation and hcf_encap reports that the HCF would not have used -* 1042 as the encapsulation mechanism -* Note that the first field of the RxFS in bufp has Native Endianess due to the conversion done by the -* BE_PAR in get_frag. +* - the Hermes reported Tunnel encapsulation or +* - the Hermes reported 1042 Encapsulation and hcf_encap reports that the HCF would not have used +* 1042 as the encapsulation mechanism +* Note that the first field of the RxFS in bufp has Native Endianess due to the conversion done by the +* BE_PAR in get_frag. *36: The Type field is the only word kept (after moving) of the just read 8 bytes, it is moved to the -* L-field. The original L-field and 6 byte SNAP header are discarded, so IFB_RxLen and buf_addr must -* be adjusted by 8. +* L-field. The original L-field and 6 byte SNAP header are discarded, so IFB_RxLen and buf_addr must +* be adjusted by 8. *40: Determine how much of the frame (starting with DA) fits in the Lookahead buffer, then read the not-yet -* read data into the lookahead buffer. -* If the lookahead buffer contains the complete message, check the MIC. The majority considered this -* I/F more appropriate then have the MSF call hcf_get_data only to check the MIC. +* read data into the lookahead buffer. +* If the lookahead buffer contains the complete message, check the MIC. The majority considered this +* I/F more appropriate then have the MSF call hcf_get_data only to check the MIC. *44: Since the complete message is copied from NIC RAM to PC RAM, the Rx can be acknowledged to the Hermes -* to optimize the flow ( a better chance to get new Rx data in the next pass through hcf_service_nic ). -* This acknowledgement can not be done via hcf_action( HCF_ACT_RX_ACK ) because this also clears -* IFB_RxLEN thus corrupting the I/F to the MSF. +* to optimize the flow ( a better chance to get new Rx data in the next pass through hcf_service_nic ). +* This acknowledgement can not be done via hcf_action( HCF_ACT_RX_ACK ) because this also clears +* IFB_RxLEN thus corrupting the I/F to the MSF. *;?: In case of DMA (compiled in and activated): *54: Limiting the number of places where the F/W is acked (e.g. the merging of the Rx-ACK with the other -* ACKs), is supposed to diminish the potential of race conditions in the F/W. -* Note 1: The CMD event is acknowledged in cmd_cmpl -* Note 2: HREG_EV_ACK_REG_READY is 0x0000 for H-I (and hopefully H-II.5) -* Note 3: The ALLOC event is acknowledged in get_fid (except for the initialization flow) +* ACKs), is supposed to diminish the potential of race conditions in the F/W. +* Note 1: The CMD event is acknowledged in cmd_cmpl +* Note 2: HREG_EV_ACK_REG_READY is 0x0000 for H-I (and hopefully H-II.5) +* Note 3: The ALLOC event is acknowledged in get_fid (except for the initialization flow) * *.NOTICE * The Non-DMA HREG_EV_RX is handled different compared with the other F/W events. @@ -3047,40 +3047,40 @@ or * *.NOTICE * The minimum size for Len must supply space for: -* - an F/W dependent number of bytes of Control Info field including the 802.11 Header field -* - Destination Address -* - Source Address -* - Length field -* - [ SNAP Header] -* - [ Ethernet-II Type] +* - an F/W dependent number of bytes of Control Info field including the 802.11 Header field +* - Destination Address +* - Source Address +* - Length field +* - [ SNAP Header] +* - [ Ethernet-II Type] * This results in 68 for Hermes-I and 80 for Hermes-II * This way the minimum amount of information is available needed by the HCF to determine whether the frame * must be decapsulated. -*.ENDDOC END DOCUMENTATION +*.ENDDOC END DOCUMENTATION * ************************************************************************************************************/ int hcf_service_nic( IFBP ifbp, wci_bufp bufp, unsigned int len ) { -int rc = HCF_SUCCESS; -hcf_16 stat; -wci_bufp buf_addr; -hcf_16 i; + int rc = HCF_SUCCESS; + hcf_16 stat; + wci_bufp buf_addr; + hcf_16 i; HCFLOGENTRY( HCF_TRACE_SERVICE_NIC, ifbp->IFB_IntOffCnt ); HCFASSERT( ifbp->IFB_Magic == HCF_MAGIC, ifbp->IFB_Magic ); HCFASSERT_INT; - ifbp->IFB_LinkStat = 0; // ;? to be obsoleted ASAP /* 1*/ - ifbp->IFB_DSLinkStat &= ~CFG_LINK_STAT_CHANGE; /* 1*/ - (void)hcf_action( ifbp, HCF_ACT_RX_ACK ); /* 2*/ - if ( ifbp->IFB_CardStat == 0 && ( stat = IPW( HREG_EV_STAT ) ) != 0xFFFF ) { /* 4*/ + ifbp->IFB_LinkStat = 0; // ;? to be obsoleted ASAP /* 1*/ + ifbp->IFB_DSLinkStat &= ~CFG_LINK_STAT_CHANGE; /* 1*/ + (void)hcf_action( ifbp, HCF_ACT_RX_ACK ); /* 2*/ + if ( ifbp->IFB_CardStat == 0 && ( stat = IPW( HREG_EV_STAT ) ) != 0xFFFF ) { /* 4*/ /* IF_NOT_DMA( HCFASSERT( !( stat & ~HREG_EV_BASIC_MASK, stat ) ) * IF_NOT_USE_DMA( HCFASSERT( !( stat & ~HREG_EV_BASIC_MASK, stat ) ) * IF_USE_DMA( HCFASSERT( !( stat & ~( HREG_EV_BASIC_MASK ^ ( HREG_EV_...DMA.... ), stat ) ) */ - /* 8*/ + /* 8*/ if ( ifbp->IFB_RscInd == 0 && stat & HREG_EV_ALLOC ) { //Note: IFB_RscInd is ALWAYS 1 for DMA ifbp->IFB_RscInd = 1; } @@ -3091,7 +3091,7 @@ hcf_16 i; } #if 0 // (HCF_SLEEP) & HCF_DDS if ( ifbp->IFB_TickCnt == 3 && ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_CONNECTED ) == 0 ) { -CFG_DDS_TICK_TIME_STRCT ltv; + CFG_DDS_TICK_TIME_STRCT ltv; // 2 second period (with 1 tick uncertanty) in not-connected mode -->go into DS_OOR hcf_action( ifbp, HCF_ACT_SLEEP ); ifbp->IFB_DSLinkStat |= CFG_LINK_STAT_DS_OOR; //set OutOfRange @@ -3100,7 +3100,7 @@ CFG_DDS_TICK_TIME_STRCT ltv; ltv.tick_time = ( ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_TIMER ) + 0x10 ) *64; //78 is more right hcf_put_info( ifbp, (LTVP)<v ); printk( "<5>Preparing for sleep, link_status: %04X, timer : %d\n", - ifbp->IFB_DSLinkStat, ltv.tick_time );//;?remove me 1 day + ifbp->IFB_DSLinkStat, ltv.tick_time );//;?remove me 1 day ifbp->IFB_TickCnt++; //;?just to make sure we do not keep on printing above message if ( ltv.tick_time < 300 * 125 ) ifbp->IFB_DSLinkStat += 0x0010; @@ -3121,66 +3121,66 @@ CFG_DDS_TICK_TIME_STRCT ltv; #if HCF_DMA if ( !( ifbp->IFB_CntlOpt & USE_DMA ) ) //!! be aware of the logical indentations #endif // HCF_DMA -/*16*/ if ( stat & HREG_EV_RX && ( ifbp->IFB_RxFID = IPW( HREG_RX_FID ) ) != 0 ) { //if 0 then DAWA_ACK - HCFASSERT( bufp, len ); - HCFASSERT( len >= HFS_DAT + 2, len ); - DAWA_ZERO_FID( HREG_RX_FID ); - HCFASSERT( ifbp->IFB_RxFID < CFG_PROD_DATA, ifbp->IFB_RxFID); - (void)setup_bap( ifbp, ifbp->IFB_RxFID, 0, IO_IN ); - get_frag( ifbp, bufp, HFS_ADDR_DEST BE_PAR(1) ); - ifbp->IFB_lap = buf_addr = bufp + HFS_ADDR_DEST; - ifbp->IFB_RxLen = (hcf_16)(bufp[HFS_DAT_LEN] + (bufp[HFS_DAT_LEN+1]<<8) + 2*6 + 2); -/*26*/ if ( ifbp->IFB_RxLen >= 22 ) { // convenient for MIC calculation (5 DWs + 1 "skipped" W) - //. get DA,SA,Len/Type and (SNAP,Type or 8 data bytes) -/*30*/ get_frag( ifbp, buf_addr, 22 BE_PAR(0) ); -/*32*/ CALC_RX_MIC( bufp, -1 ); //. initialize MIC - CALC_RX_MIC( buf_addr, HCF_DASA_SIZE ); //. MIC over DA, SA - CALC_RX_MIC( null_addr, 4 ); //. MIC over (virtual) priority field - CALC_RX_MIC( buf_addr+14, 8 ); //. skip Len, MIC over SNAP,Type or 8 data bytes) - buf_addr += 22; + /*16*/ if ( stat & HREG_EV_RX && ( ifbp->IFB_RxFID = IPW( HREG_RX_FID ) ) != 0 ) { //if 0 then DAWA_ACK + HCFASSERT( bufp, len ); + HCFASSERT( len >= HFS_DAT + 2, len ); + DAWA_ZERO_FID( HREG_RX_FID ); + HCFASSERT( ifbp->IFB_RxFID < CFG_PROD_DATA, ifbp->IFB_RxFID); + (void)setup_bap( ifbp, ifbp->IFB_RxFID, 0, IO_IN ); + get_frag( ifbp, bufp, HFS_ADDR_DEST BE_PAR(1) ); + ifbp->IFB_lap = buf_addr = bufp + HFS_ADDR_DEST; + ifbp->IFB_RxLen = (hcf_16)(bufp[HFS_DAT_LEN] + (bufp[HFS_DAT_LEN+1]<<8) + 2*6 + 2); + /*26*/ if ( ifbp->IFB_RxLen >= 22 ) { // convenient for MIC calculation (5 DWs + 1 "skipped" W) + //. get DA,SA,Len/Type and (SNAP,Type or 8 data bytes) + /*30*/ get_frag( ifbp, buf_addr, 22 BE_PAR(0) ); + /*32*/ CALC_RX_MIC( bufp, -1 ); //. initialize MIC + CALC_RX_MIC( buf_addr, HCF_DASA_SIZE ); //. MIC over DA, SA + CALC_RX_MIC( null_addr, 4 ); //. MIC over (virtual) priority field + CALC_RX_MIC( buf_addr+14, 8 ); //. skip Len, MIC over SNAP,Type or 8 data bytes) + buf_addr += 22; #if (HCF_TYPE) & HCF_TYPE_CCX //!!be careful do not use positive test on HCF_ACT_CCX_OFF, because IFB_CKIPStat is initially 0 - if( ifbp->IFB_CKIPStat != HCF_ACT_CCX_ON ) + if( ifbp->IFB_CKIPStat != HCF_ACT_CCX_ON ) #endif // HCF_TYPE_CCX - { + { #if (HCF_ENCAP) == HCF_ENC - HCFASSERT( len >= HFS_DAT + 2 + sizeof(snap_header), len ); -/*34*/ i = *(wci_recordp)&bufp[HFS_STAT] & ( HFS_STAT_MSG_TYPE | HFS_STAT_ERR ); - if ( i == HFS_STAT_TUNNEL || - ( i == HFS_STAT_1042 && hcf_encap( (wci_bufp)&bufp[HFS_TYPE] ) != ENC_TUNNEL ) ) { - //. copy E-II Type to 802.3 LEN field -/*36*/ bufp[HFS_LEN ] = bufp[HFS_TYPE ]; - bufp[HFS_LEN+1] = bufp[HFS_TYPE+1]; - //. discard Snap by overwriting with data - ifbp->IFB_RxLen -= (HFS_TYPE - HFS_LEN); - buf_addr -= ( HFS_TYPE - HFS_LEN ); // this happens to bring us at a DW boundary of 36 - } + HCFASSERT( len >= HFS_DAT + 2 + sizeof(snap_header), len ); + /*34*/ i = *(wci_recordp)&bufp[HFS_STAT] & ( HFS_STAT_MSG_TYPE | HFS_STAT_ERR ); + if ( i == HFS_STAT_TUNNEL || + ( i == HFS_STAT_1042 && hcf_encap( (wci_bufp)&bufp[HFS_TYPE] ) != ENC_TUNNEL ) ) { + //. copy E-II Type to 802.3 LEN field + /*36*/ bufp[HFS_LEN ] = bufp[HFS_TYPE ]; + bufp[HFS_LEN+1] = bufp[HFS_TYPE+1]; + //. discard Snap by overwriting with data + ifbp->IFB_RxLen -= (HFS_TYPE - HFS_LEN); + buf_addr -= ( HFS_TYPE - HFS_LEN ); // this happens to bring us at a DW boundary of 36 + } #endif // HCF_ENC + } } - } -/*40*/ ifbp->IFB_lal = min( (hcf_16)(len - HFS_ADDR_DEST), ifbp->IFB_RxLen ); - i = ifbp->IFB_lal - ( buf_addr - ( bufp + HFS_ADDR_DEST ) ); - get_frag( ifbp, buf_addr, i BE_PAR(0) ); - CALC_RX_MIC( buf_addr, i ); + /*40*/ ifbp->IFB_lal = min( (hcf_16)(len - HFS_ADDR_DEST), ifbp->IFB_RxLen ); + i = ifbp->IFB_lal - ( buf_addr - ( bufp + HFS_ADDR_DEST ) ); + get_frag( ifbp, buf_addr, i BE_PAR(0) ); + CALC_RX_MIC( buf_addr, i ); #if (HCF_TYPE) & HCF_TYPE_WPA - if ( ifbp->IFB_lal == ifbp->IFB_RxLen ) { - rc = check_mic( ifbp ); - } + if ( ifbp->IFB_lal == ifbp->IFB_RxLen ) { + rc = check_mic( ifbp ); + } #endif // HCF_TYPE_WPA -/*44*/ if ( len - HFS_ADDR_DEST >= ifbp->IFB_RxLen ) { - ifbp->IFB_RxFID = 0; - } else { /* IFB_RxFID is cleared, so you do not get another Rx_Ack at next entry of hcf_service_nic */ - stat &= (hcf_16)~HREG_EV_RX; //don't ack Rx if processing not yet completed + /*44*/ if ( len - HFS_ADDR_DEST >= ifbp->IFB_RxLen ) { + ifbp->IFB_RxFID = 0; + } else { /* IFB_RxFID is cleared, so you do not get another Rx_Ack at next entry of hcf_service_nic */ + stat &= (hcf_16)~HREG_EV_RX; //don't ack Rx if processing not yet completed + } } - } // in case of DMA: signal availability of rx and/or tx packets to MSF IF_USE_DMA( ifbp->IFB_DmaPackets |= stat & ( HREG_EV_RDMAD | HREG_EV_TDMAD ) ); // rlav : pending HREG_EV_RDMAD or HREG_EV_TDMAD events get acknowledged here. -/*54*/ stat &= (hcf_16)~( HREG_EV_SLEEP_REQ | HREG_EV_CMD | HREG_EV_ACK_REG_READY | HREG_EV_ALLOC | HREG_EV_FW_DMA ); -//a positive mask would be easier to understand /*54*/ stat &= (hcf_16)~( HREG_EV_SLEEP_REQ | HREG_EV_CMD | HREG_EV_ACK_REG_READY | HREG_EV_ALLOC | HREG_EV_FW_DMA ); + /*54*/ stat &= (hcf_16)~( HREG_EV_SLEEP_REQ | HREG_EV_CMD | HREG_EV_ACK_REG_READY | HREG_EV_ALLOC | HREG_EV_FW_DMA ); +//a positive mask would be easier to understand /*54*/ stat &= (hcf_16)~( HREG_EV_SLEEP_REQ | HREG_EV_CMD | HREG_EV_ACK_REG_READY | HREG_EV_ALLOC | HREG_EV_FW_DMA ); IF_USE_DMA( stat &= (hcf_16)~HREG_EV_RX ); if ( stat ) { - DAWA_ACK( stat ); /*DAWA*/ + DAWA_ACK( stat ); /*DAWA*/ } } HCFLOGEXIT( HCF_TRACE_SERVICE_NIC ); @@ -3190,41 +3190,41 @@ CFG_DDS_TICK_TIME_STRCT ltv; /************************************************************************************************************ -************************** H C F S U P P O R T R O U T I N E S ****************************************** -************************************************************************************************************/ + ************************** H C F S U P P O R T R O U T I N E S ****************************************** + ************************************************************************************************************/ /************************************************************************************************************ -* -*.SUBMODULE void calc_mic( hcf_32* p, hcf_32 m ) -*.PURPOSE calculate MIC on a quad byte. -* -*.ARGUMENTS -* p address of the MIC -* m 32 bit value to be processed by the MIC calculation engine -* -*.RETURNS N.A. -* -*.DESCRIPTION -* calc_mic is the implementation of the MIC algorithm. It is a monkey-see monkey-do copy of -* Michael::appendByte() -* of Appendix C of .......... -* -* -*.DIAGRAM -* -*.NOTICE -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void calc_mic( hcf_32* p, hcf_32 m ) + *.PURPOSE calculate MIC on a quad byte. + * + *.ARGUMENTS + * p address of the MIC + * m 32 bit value to be processed by the MIC calculation engine + * + *.RETURNS N.A. + * + *.DESCRIPTION + * calc_mic is the implementation of the MIC algorithm. It is a monkey-see monkey-do copy of + * Michael::appendByte() + * of Appendix C of .......... + * + * + *.DIAGRAM + * + *.NOTICE + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ #if (HCF_TYPE) & HCF_TYPE_WPA #define ROL32( A, n ) ( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) ) #define ROR32( A, n ) ROL32( (A), 32-(n) ) -#define L *p -#define R *(p+1) +#define L *p +#define R *(p+1) void calc_mic( hcf_32* p, hcf_32 m ) @@ -3250,38 +3250,38 @@ calc_mic( hcf_32* p, hcf_32 m ) #if (HCF_TYPE) & HCF_TYPE_WPA /************************************************************************************************************ -* -*.SUBMODULE void calc_mic_rx_frag( IFBP ifbp, wci_bufp p, int len ) -*.PURPOSE calculate MIC on a single fragment. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* bufp (byte) address of buffer -* len length in bytes of buffer specified by bufp -* -*.RETURNS N.A. -* -*.DESCRIPTION -* calc_mic_rx_frag ........ -* -* The MIC is located in the IFB. -* The MIC is separate for Tx and Rx, thus allowing hcf_send_msg to occur between hcf_service_nic and -* hcf_rcv_msg. -* -* -*.DIAGRAM -* -*.NOTICE -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void calc_mic_rx_frag( IFBP ifbp, wci_bufp p, int len ) + *.PURPOSE calculate MIC on a single fragment. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * bufp (byte) address of buffer + * len length in bytes of buffer specified by bufp + * + *.RETURNS N.A. + * + *.DESCRIPTION + * calc_mic_rx_frag ........ + * + * The MIC is located in the IFB. + * The MIC is separate for Tx and Rx, thus allowing hcf_send_msg to occur between hcf_service_nic and + * hcf_rcv_msg. + * + * + *.DIAGRAM + * + *.NOTICE + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ void calc_mic_rx_frag( IFBP ifbp, wci_bufp p, int len ) { -static union { hcf_32 x32; hcf_16 x16[2]; hcf_8 x8[4]; } x; //* area to accumulate 4 bytes input for MIC engine -int i; + static union { hcf_32 x32; hcf_16 x16[2]; hcf_8 x8[4]; } x; //* area to accumulate 4 bytes input for MIC engine + int i; - if ( len == -1 ) { //initialize MIC housekeeping + if ( len == -1 ) { //initialize MIC housekeeping i = *(wci_recordp)&p[HFS_STAT]; /* i = CNV_SHORTP_TO_LITTLE(&p[HFS_STAT]); should not be neede to prevent alignment poroblems * since len == -1 if and only if p is lookahaead buffer which MUST be word aligned @@ -3289,12 +3289,12 @@ int i; */ if ( ( i & HFS_STAT_MIC ) == 0 ) { - ifbp->IFB_MICRxCarry = 0xFFFF; //suppress MIC calculation + ifbp->IFB_MICRxCarry = 0xFFFF; //suppress MIC calculation } else { ifbp->IFB_MICRxCarry = 0; -//* Note that "coincidentally" the bit positions used in HFS_STAT -//* correspond with the offset of the key in IFB_MICKey - i = ( i & HFS_STAT_MIC_KEY_ID ) >> 10; /* coincidentally no shift needed for i itself */ +//* Note that "coincidentally" the bit positions used in HFS_STAT +//* correspond with the offset of the key in IFB_MICKey + i = ( i & HFS_STAT_MIC_KEY_ID ) >> 10; /* coincidentally no shift needed for i itself */ ifbp->IFB_MICRx[0] = CNV_LONG_TO_LITTLE(ifbp->IFB_MICRxKey[i ]); ifbp->IFB_MICRx[1] = CNV_LONG_TO_LITTLE(ifbp->IFB_MICRxKey[i+1]); } @@ -3308,11 +3308,11 @@ int i; ifbp->IFB_MICRxCarry = 4; len -= 4; } - } else while ( ifbp->IFB_MICRxCarry < 4 && len ) { //note for hcf_16 applies: 0xFFFF > 4 - x.x8[ifbp->IFB_MICRxCarry++] = *p++; - len--; - } - while ( ifbp->IFB_MICRxCarry == 4 ) { //contrived so we have only 1 call to calc_mic so we could bring it in-line + } else while ( ifbp->IFB_MICRxCarry < 4 && len ) { //note for hcf_16 applies: 0xFFFF > 4 + x.x8[ifbp->IFB_MICRxCarry++] = *p++; + len--; + } + while ( ifbp->IFB_MICRxCarry == 4 ) { //contrived so we have only 1 call to calc_mic so we could bring it in-line calc_mic( ifbp->IFB_MICRx, x.x32 ); x.x32 = CNV_LONGP_TO_LITTLE(p); p += 4; @@ -3328,92 +3328,92 @@ int i; #if (HCF_TYPE) & HCF_TYPE_WPA /************************************************************************************************************ -* -*.SUBMODULE void calc_mic_tx_frag( IFBP ifbp, wci_bufp p, int len ) -*.PURPOSE calculate MIC on a single fragment. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* bufp (byte) address of buffer -* len length in bytes of buffer specified by bufp -* -*.RETURNS N.A. -* -*.DESCRIPTION -* calc_mic_tx_frag ........ -* -* The MIC is located in the IFB. -* The MIC is separate for Tx and Rx, thus allowing hcf_send_msg to occur between hcf_service_nic and -* hcf_rcv_msg. -* -* -*.DIAGRAM -* -*.NOTICE -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void calc_mic_tx_frag( IFBP ifbp, wci_bufp p, int len ) + *.PURPOSE calculate MIC on a single fragment. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * bufp (byte) address of buffer + * len length in bytes of buffer specified by bufp + * + *.RETURNS N.A. + * + *.DESCRIPTION + * calc_mic_tx_frag ........ + * + * The MIC is located in the IFB. + * The MIC is separate for Tx and Rx, thus allowing hcf_send_msg to occur between hcf_service_nic and + * hcf_rcv_msg. + * + * + *.DIAGRAM + * + *.NOTICE + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ void calc_mic_tx_frag( IFBP ifbp, wci_bufp p, int len ) { -static union { hcf_32 x32; hcf_16 x16[2]; hcf_8 x8[4]; } x; //* area to accumulate 4 bytes input for MIC engine + static union { hcf_32 x32; hcf_16 x16[2]; hcf_8 x8[4]; } x; //* area to accumulate 4 bytes input for MIC engine - //if initialization request + //if initialization request if ( len == -1 ) { - //. presume MIC calculation disabled + //. presume MIC calculation disabled ifbp->IFB_MICTxCarry = 0xFFFF; - //. if MIC calculation enabled + //. if MIC calculation enabled if ( ifbp->IFB_MICTxCntl ) { - //. . clear MIC carry + //. . clear MIC carry ifbp->IFB_MICTxCarry = 0; - //. . initialize MIC-engine - ifbp->IFB_MICTx[0] = CNV_LONG_TO_LITTLE(ifbp->IFB_MICTxKey[0]); /*Tx always uses Key 0 */ + //. . initialize MIC-engine + ifbp->IFB_MICTx[0] = CNV_LONG_TO_LITTLE(ifbp->IFB_MICTxKey[0]); /*Tx always uses Key 0 */ ifbp->IFB_MICTx[1] = CNV_LONG_TO_LITTLE(ifbp->IFB_MICTxKey[1]); } - //else + //else } else { - //. if MIC enabled (Tx) / if MIC present (Rx) - //. and no carry from previous calc_mic_frag + //. if MIC enabled (Tx) / if MIC present (Rx) + //. and no carry from previous calc_mic_frag if ( ifbp->IFB_MICTxCarry == 0 ) { - //. . preset accu with 4 bytes from buffer + //. . preset accu with 4 bytes from buffer x.x32 = CNV_LONGP_TO_LITTLE(p); - //. . adjust pointer accordingly + //. . adjust pointer accordingly p += 4; - //. . if buffer contained less then 4 bytes + //. . if buffer contained less then 4 bytes if ( len < 4 ) { - //. . . promote valid bytes in accu to carry - //. . . flag accu to contain incomplete double word + //. . . promote valid bytes in accu to carry + //. . . flag accu to contain incomplete double word ifbp->IFB_MICTxCarry = (hcf_16)len; - //. . else + //. . else } else { - //. . . flag accu to contain complete double word + //. . . flag accu to contain complete double word ifbp->IFB_MICTxCarry = 4; - //. . adjust remaining buffer length + //. . adjust remaining buffer length len -= 4; } - //. else if MIC enabled - //. and if carry bytes from previous calc_mic_tx_frag - //. . move (1-3) bytes from carry into accu - } else while ( ifbp->IFB_MICTxCarry < 4 && len ) { /* note for hcf_16 applies: 0xFFFF > 4 */ - x.x8[ifbp->IFB_MICTxCarry++] = *p++; - len--; - } - //. while accu contains complete double word - //. and MIC enabled + //. else if MIC enabled + //. and if carry bytes from previous calc_mic_tx_frag + //. . move (1-3) bytes from carry into accu + } else while ( ifbp->IFB_MICTxCarry < 4 && len ) { /* note for hcf_16 applies: 0xFFFF > 4 */ + x.x8[ifbp->IFB_MICTxCarry++] = *p++; + len--; + } + //. while accu contains complete double word + //. and MIC enabled while ( ifbp->IFB_MICTxCarry == 4 ) { - //. . pass accu to MIC engine + //. . pass accu to MIC engine calc_mic( ifbp->IFB_MICTx, x.x32 ); - //. . copy next 4 bytes from buffer to accu + //. . copy next 4 bytes from buffer to accu x.x32 = CNV_LONGP_TO_LITTLE(p); - //. . adjust buffer pointer + //. . adjust buffer pointer p += 4; - //. . if buffer contained less then 4 bytes - //. . . promote valid bytes in accu to carry - //. . . flag accu to contain incomplete double word + //. . if buffer contained less then 4 bytes + //. . . promote valid bytes in accu to carry + //. . . flag accu to contain incomplete double word if ( len < 4 ) { ifbp->IFB_MICTxCarry = (hcf_16)len; } - //. . adjust remaining buffer length + //. . adjust remaining buffer length len -= 4; } } @@ -3423,94 +3423,94 @@ static union { hcf_32 x32; hcf_16 x16[2]; hcf_8 x8[4]; } x; //* area to accumula #if HCF_PROT_TIME /************************************************************************************************************ -* -*.SUBMODULE void calibrate( IFBP ifbp ) -*.PURPOSE calibrates the S/W protection counter against the Hermes Timer tick. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS N.A. -* -*.DESCRIPTION -* calibrates the S/W protection counter against the Hermes Timer tick -* IFB_TickIni is the value used to initialize the S/W protection counter such that the expiration period -* more or less independent of the processor speed. If IFB_TickIni is not yet calibrated, it is done now. -* This calibration is "reasonably" accurate because the Hermes is in a quiet state as a result of the -* Initialize command. -* -* -*.DIAGRAM -* -*1: IFB_TickIni is initialized at INI_TICK_INI by hcf_connect. If calibrate succeeds, IFB_TickIni is -* guaranteed to be changed. As a consequence there will be only 1 shot at calibration (regardless of the -* number of init calls) under normal circumstances. -*2: Calibration is done HCF_PROT_TIME_CNT times. This diminish the effects of jitter and interference, -* especially in a pre-emptive environment. HCF_PROT_TIME_CNT is in the range of 16 through 32 and derived -* from the HCF_PROT_TIME specified by the MSF programmer. The divisor needed to scale HCF_PROT_TIME into the -* 16-32 range, is used as a multiplicator after the calibration, to scale the found value back to the -* requested range. This way a compromise is achieved between accuracy and duration of the calibration -* process. -*3: Acknowledge the Timer Tick Event. -* Each cycle is limited to at most INI_TICK_INI samples of the TimerTick status of the Hermes. -* Since the start of calibrate is unrelated to the Hermes Internal Timer, the first interval may last from 0 -* to the normal interval, all subsequent intervals should be the full length of the Hermes Tick interval. -* The Hermes Timer Tick is not reprogrammed by the HCF, hence it is running at the default of 10 k -* microseconds. -*4: If the Timer Tick Event is continuously up (prot_cnt still has the value INI_TICK_INI) or no Timer Tick -* Event occurred before the protection counter expired, reset IFB_TickIni to INI_TICK_INI, -* set the defunct bit of IFB_CardStat (thus rendering the Hermes inoperable) and exit the calibrate routine. -*8: ifbp->IFB_TickIni is multiplied to scale the found value back to the requested range as explained under 2. -* -*.NOTICE -* o Although there are a number of viewpoints possible, calibrate() uses as error strategy that a single -* failure of the Hermes TimerTick is considered fatal. -* o There is no hard and concrete time-out value defined for Hermes activities. The default 1 seconds is -* believed to be sufficiently "relaxed" for real life and to be sufficiently short to be still useful in an -* environment with humans. -* o Note that via IFB_DefunctStat time outs in cmd_wait and in hcfio_string block all Hermes access till the -* next init so functions which call a mix of cmd_wait and hcfio_string only need to check the return status -* of the last call -* o The return code is preset at Time out. -* The additional complication that no calibrated value for the protection count can be assumed since -* calibrate() does not yet have determined a calibrated value (a catch 22), is handled by setting the -* initial value at INI_TICK_INI (by hcf_connect). This approach is considered safe, because: -* - the HCF does not use the pipeline mechanism of Hermes commands. -* - the likelihood of failure (the only time when protection count is relevant) is small. -* - the time will be sufficiently large on a fast machine (busy bit drops on good NIC before counter -* expires) -* - the time will be sufficiently small on a slow machine (counter expires on bad NIC before the end user -* switches the power off in despair -* The time needed to wrap a 32 bit counter around is longer than many humans want to wait, hence the more or -* less arbitrary value of 0x40000L is chosen, assuming it does not take too long on an XT and is not too -* short on a scream-machine. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void calibrate( IFBP ifbp ) + *.PURPOSE calibrates the S/W protection counter against the Hermes Timer tick. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS N.A. + * + *.DESCRIPTION + * calibrates the S/W protection counter against the Hermes Timer tick + * IFB_TickIni is the value used to initialize the S/W protection counter such that the expiration period + * more or less independent of the processor speed. If IFB_TickIni is not yet calibrated, it is done now. + * This calibration is "reasonably" accurate because the Hermes is in a quiet state as a result of the + * Initialize command. + * + * + *.DIAGRAM + * + *1: IFB_TickIni is initialized at INI_TICK_INI by hcf_connect. If calibrate succeeds, IFB_TickIni is + * guaranteed to be changed. As a consequence there will be only 1 shot at calibration (regardless of the + * number of init calls) under normal circumstances. + *2: Calibration is done HCF_PROT_TIME_CNT times. This diminish the effects of jitter and interference, + * especially in a pre-emptive environment. HCF_PROT_TIME_CNT is in the range of 16 through 32 and derived + * from the HCF_PROT_TIME specified by the MSF programmer. The divisor needed to scale HCF_PROT_TIME into the + * 16-32 range, is used as a multiplicator after the calibration, to scale the found value back to the + * requested range. This way a compromise is achieved between accuracy and duration of the calibration + * process. + *3: Acknowledge the Timer Tick Event. + * Each cycle is limited to at most INI_TICK_INI samples of the TimerTick status of the Hermes. + * Since the start of calibrate is unrelated to the Hermes Internal Timer, the first interval may last from 0 + * to the normal interval, all subsequent intervals should be the full length of the Hermes Tick interval. + * The Hermes Timer Tick is not reprogrammed by the HCF, hence it is running at the default of 10 k + * microseconds. + *4: If the Timer Tick Event is continuously up (prot_cnt still has the value INI_TICK_INI) or no Timer Tick + * Event occurred before the protection counter expired, reset IFB_TickIni to INI_TICK_INI, + * set the defunct bit of IFB_CardStat (thus rendering the Hermes inoperable) and exit the calibrate routine. + *8: ifbp->IFB_TickIni is multiplied to scale the found value back to the requested range as explained under 2. + * + *.NOTICE + * o Although there are a number of viewpoints possible, calibrate() uses as error strategy that a single + * failure of the Hermes TimerTick is considered fatal. + * o There is no hard and concrete time-out value defined for Hermes activities. The default 1 seconds is + * believed to be sufficiently "relaxed" for real life and to be sufficiently short to be still useful in an + * environment with humans. + * o Note that via IFB_DefunctStat time outs in cmd_wait and in hcfio_string block all Hermes access till the + * next init so functions which call a mix of cmd_wait and hcfio_string only need to check the return status + * of the last call + * o The return code is preset at Time out. + * The additional complication that no calibrated value for the protection count can be assumed since + * calibrate() does not yet have determined a calibrated value (a catch 22), is handled by setting the + * initial value at INI_TICK_INI (by hcf_connect). This approach is considered safe, because: + * - the HCF does not use the pipeline mechanism of Hermes commands. + * - the likelihood of failure (the only time when protection count is relevant) is small. + * - the time will be sufficiently large on a fast machine (busy bit drops on good NIC before counter + * expires) + * - the time will be sufficiently small on a slow machine (counter expires on bad NIC before the end user + * switches the power off in despair + * The time needed to wrap a 32 bit counter around is longer than many humans want to wait, hence the more or + * less arbitrary value of 0x40000L is chosen, assuming it does not take too long on an XT and is not too + * short on a scream-machine. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC void calibrate( IFBP ifbp ) { -int cnt = HCF_PROT_TIME_CNT; -hcf_32 prot_cnt; + int cnt = HCF_PROT_TIME_CNT; + hcf_32 prot_cnt; HCFTRACE( ifbp, HCF_TRACE_CALIBRATE ); - if ( ifbp->IFB_TickIni == INI_TICK_INI ) { /*1*/ - ifbp->IFB_TickIni = 0; /*2*/ - while ( cnt-- ) { - prot_cnt = INI_TICK_INI; - OPW( HREG_EV_ACK, HREG_EV_TICK ); /*3*/ - while ( (IPW( HREG_EV_STAT ) & HREG_EV_TICK) == 0 && --prot_cnt ) { - ifbp->IFB_TickIni++; - } - if ( prot_cnt == 0 || prot_cnt == INI_TICK_INI ) { /*4*/ - ifbp->IFB_TickIni = INI_TICK_INI; - ifbp->IFB_DefunctStat = HCF_ERR_DEFUNCT_TIMER; - ifbp->IFB_CardStat |= CARD_STAT_DEFUNCT; - HCFASSERT( DO_ASSERT, prot_cnt ); - } + if ( ifbp->IFB_TickIni == INI_TICK_INI ) { /*1*/ + ifbp->IFB_TickIni = 0; /*2*/ + while ( cnt-- ) { + prot_cnt = INI_TICK_INI; + OPW( HREG_EV_ACK, HREG_EV_TICK ); /*3*/ + while ( (IPW( HREG_EV_STAT ) & HREG_EV_TICK) == 0 && --prot_cnt ) { + ifbp->IFB_TickIni++; + } + if ( prot_cnt == 0 || prot_cnt == INI_TICK_INI ) { /*4*/ + ifbp->IFB_TickIni = INI_TICK_INI; + ifbp->IFB_DefunctStat = HCF_ERR_DEFUNCT_TIMER; + ifbp->IFB_CardStat |= CARD_STAT_DEFUNCT; + HCFASSERT( DO_ASSERT, prot_cnt ); } - ifbp->IFB_TickIni <<= HCF_PROT_TIME_SHFT; /*8*/ + } + ifbp->IFB_TickIni <<= HCF_PROT_TIME_SHFT; /*8*/ } HCFTRACE( ifbp, HCF_TRACE_CALIBRATE | HCF_TRACE_EXIT ); } // calibrate @@ -3520,48 +3520,48 @@ hcf_32 prot_cnt; #if (HCF_DL_ONLY) == 0 #if (HCF_TYPE) & HCF_TYPE_WPA /************************************************************************************************************ -* -*.SUBMODULE int check_mic( IFBP ifbp ) -*.PURPOSE verifies the MIC of a received non-USB frame. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* HCF_SUCCESS -* HCF_ERR_MIC -* -*.DESCRIPTION -* -* -*.DIAGRAM -* -*4: test whether or not a MIC is reported by the Hermes -*14: the calculated MIC and the received MIC are compared, the return status is set when there is a mismatch -* -*.NOTICE -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int check_mic( IFBP ifbp ) + *.PURPOSE verifies the MIC of a received non-USB frame. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * HCF_SUCCESS + * HCF_ERR_MIC + * + *.DESCRIPTION + * + * + *.DIAGRAM + * + *4: test whether or not a MIC is reported by the Hermes + *14: the calculated MIC and the received MIC are compared, the return status is set when there is a mismatch + * + *.NOTICE + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ int check_mic( IFBP ifbp ) { -int rc = HCF_SUCCESS; -hcf_32 x32[2]; //* area to save rcvd 8 bytes MIC + int rc = HCF_SUCCESS; + hcf_32 x32[2]; //* area to save rcvd 8 bytes MIC - //if MIC present in RxFS + //if MIC present in RxFS if ( *(wci_recordp)&ifbp->IFB_lap[-HFS_ADDR_DEST] & HFS_STAT_MIC ) { - //or if ( ifbp->IFB_MICRxCarry != 0xFFFF ) - CALC_RX_MIC( mic_pad, 8 ); //. process up to 3 remaining bytes of data and append 5 to 8 bytes of padding to MIC calculation + //or if ( ifbp->IFB_MICRxCarry != 0xFFFF ) + CALC_RX_MIC( mic_pad, 8 ); //. process up to 3 remaining bytes of data and append 5 to 8 bytes of padding to MIC calculation get_frag( ifbp, (wci_bufp)x32, 8 BE_PAR(0));//. get 8 byte MIC from NIC - //. if calculated and received MIC do not match - //. . set status at HCF_ERR_MIC -/*14*/ if ( x32[0] != CNV_LITTLE_TO_LONG(ifbp->IFB_MICRx[0]) || - x32[1] != CNV_LITTLE_TO_LONG(ifbp->IFB_MICRx[1]) ) { + //. if calculated and received MIC do not match + //. . set status at HCF_ERR_MIC + /*14*/ if ( x32[0] != CNV_LITTLE_TO_LONG(ifbp->IFB_MICRx[0]) || + x32[1] != CNV_LITTLE_TO_LONG(ifbp->IFB_MICRx[1]) ) { rc = HCF_ERR_MIC; } } - //return status + //return status return rc; } // check_mic #endif // HCF_TYPE_WPA @@ -3569,61 +3569,61 @@ hcf_32 x32[2]; //* area to save rcvd 8 bytes MIC /************************************************************************************************************ -* -*.SUBMODULE int cmd_cmpl( IFBP ifbp ) -*.PURPOSE waits for Hermes Command Completion. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* IFB_DefunctStat -* HCF_ERR_TIME_OUT -* HCF_ERR_DEFUNCT_CMD_SEQ -* HCF_SUCCESS -* -*.DESCRIPTION -* -* -*.DIAGRAM -* -*2: Once cmd_cmpl is called, the Busy option bit in IFB_Cmd must be cleared -*4: If Status register and command code don't match either: -* - the Hermes and Host are out of sync ( a fatal error) -* - error bits are reported via the Status Register. -* Out of sync is considered fatal and brings the HCF in Defunct mode -* Errors reported via the Status Register should be caused by sequence violations in Hermes command -* sequences and hence these bugs should have been found during engineering testing. Since there is no -* strategy to cope with this problem, it might as well be ignored at run time. Note that for any particular -* situation where a strategy is formulated to handle the consequences of a particular bug causing a -* particular Error situation reported via the Status Register, the bug should be removed rather than adding -* logic to cope with the consequences of the bug. -* There have been HCF versions where an error report via the Status Register even brought the HCF in defunct -* mode (although it was not yet named like that at that time). This is particular undesirable behavior for a -* general library. -* Simply reporting the error (as "interesting") is debatable. There also have been HCF versions with this -* strategy using the "vague" HCF_FAILURE code. -* The error is reported via: -* - MiscErr tally of the HCF Tally set -* - the (informative) fields IFB_ErrCmd and IFB_ErrQualifier -* - the assert mechanism -*8: Here the Defunct case and the Status error are separately treated -* -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int cmd_cmpl( IFBP ifbp ) + *.PURPOSE waits for Hermes Command Completion. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * IFB_DefunctStat + * HCF_ERR_TIME_OUT + * HCF_ERR_DEFUNCT_CMD_SEQ + * HCF_SUCCESS + * + *.DESCRIPTION + * + * + *.DIAGRAM + * + *2: Once cmd_cmpl is called, the Busy option bit in IFB_Cmd must be cleared + *4: If Status register and command code don't match either: + * - the Hermes and Host are out of sync ( a fatal error) + * - error bits are reported via the Status Register. + * Out of sync is considered fatal and brings the HCF in Defunct mode + * Errors reported via the Status Register should be caused by sequence violations in Hermes command + * sequences and hence these bugs should have been found during engineering testing. Since there is no + * strategy to cope with this problem, it might as well be ignored at run time. Note that for any particular + * situation where a strategy is formulated to handle the consequences of a particular bug causing a + * particular Error situation reported via the Status Register, the bug should be removed rather than adding + * logic to cope with the consequences of the bug. + * There have been HCF versions where an error report via the Status Register even brought the HCF in defunct + * mode (although it was not yet named like that at that time). This is particular undesirable behavior for a + * general library. + * Simply reporting the error (as "interesting") is debatable. There also have been HCF versions with this + * strategy using the "vague" HCF_FAILURE code. + * The error is reported via: + * - MiscErr tally of the HCF Tally set + * - the (informative) fields IFB_ErrCmd and IFB_ErrQualifier + * - the assert mechanism + *8: Here the Defunct case and the Status error are separately treated + * + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int cmd_cmpl( IFBP ifbp ) { -PROT_CNT_INI; -int rc = HCF_SUCCESS; -hcf_16 stat; + PROT_CNT_INI; + int rc = HCF_SUCCESS; + hcf_16 stat; HCFLOGENTRY( HCF_TRACE_CMD_CPL, ifbp->IFB_Cmd ); - ifbp->IFB_Cmd &= ~HCMD_BUSY; /* 2 */ - HCF_WAIT_WHILE( (IPW( HREG_EV_STAT) & HREG_EV_CMD) == 0 ); /* 4 */ + ifbp->IFB_Cmd &= ~HCMD_BUSY; /* 2 */ + HCF_WAIT_WHILE( (IPW( HREG_EV_STAT) & HREG_EV_CMD) == 0 ); /* 4 */ stat = IPW( HREG_STAT ); #if HCF_PROT_TIME if ( prot_cnt == 0 ) { @@ -3634,8 +3634,8 @@ hcf_16 stat; #endif // HCF_PROT_TIME { DAWA_ACK( HREG_EV_CMD ); -/*4*/ if ( stat != (ifbp->IFB_Cmd & HCMD_CMD_CODE) ) { -/*8*/ if ( ( (stat ^ ifbp->IFB_Cmd ) & HCMD_CMD_CODE) != 0 ) { + /*4*/ if ( stat != (ifbp->IFB_Cmd & HCMD_CMD_CODE) ) { + /*8*/ if ( ( (stat ^ ifbp->IFB_Cmd ) & HCMD_CMD_CODE) != 0 ) { rc = ifbp->IFB_DefunctStat = HCF_ERR_DEFUNCT_CMD_SEQ; ifbp->IFB_CardStat |= CARD_STAT_DEFUNCT; } @@ -3646,82 +3646,82 @@ hcf_16 stat; HCFASSERT( DO_ASSERT, MERGE_2( ifbp->IFB_ErrQualifier, ifbp->IFB_ErrCmd ) ); } } - HCFASSERT( rc == HCF_SUCCESS, rc); - HCFLOGEXIT( HCF_TRACE_CMD_CPL ); - return rc; -} // cmd_cmpl - - -/************************************************************************************************************ -* -*.SUBMODULE int cmd_exe( IFBP ifbp, int cmd_code, int par_0 ) -*.PURPOSE Executes synchronous part of Hermes Command and - optionally - waits for Command Completion. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* cmd_code -* par_0 -* -*.RETURNS -* IFB_DefunctStat -* HCF_ERR_DEFUNCT_CMD_SEQ -* HCF_SUCCESS -* HCF_ERR_TO_BE_ADDED <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< -* -*.DESCRIPTION -* Executes synchronous Hermes Command and waits for Command Completion -* -* The general HCF strategy is to wait for command completion. As a consequence: -* - the read of the busy bit before writing the command register is superfluous -* - the Hermes requirement that no Inquiry command may be executed if there is still an unacknowledged -* Inquiry command outstanding, is automatically met. -* The Tx command uses the "Busy" bit in the cmd_code parameter to deviate from this general HCF strategy. -* The idea is that by not busy-waiting on completion of this frequently used command the processor -* utilization is diminished while using the busy-wait on all other seldom used commands the flow is kept -* simple. -* -* -* -*.DIAGRAM -* -*1: skip the body of cmd_exe when in defunct mode or when - based on the S/W Support register write and -* read back test - there is apparently no NIC. -* Note: we gave up on the "old" strategy to write the S/W Support register at magic only when needed. Due to -* the intricateness of Hermes F/W varieties ( which behave differently as far as corruption of the S/W -* Support register is involved), the increasing number of Hermes commands which do an implicit initialize -* (thus modifying the S/W Support register) and the workarounds of some OS/Support S/W induced aspects (e.g. -* the System Soft library at WinNT which postpones the actual mapping of I/O space up to 30 seconds after -* giving the go-ahead), the "magic" strategy is now reduced to a simple write and read back. This means that -* problems like a bug tramping over the memory mapped Hermes registers will no longer be noticed as side -* effect of the S/W Support register check. -*2: check whether the preceding command skipped the busy wait and if so, check for command completion -* -*.NOTICE -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + HCFASSERT( rc == HCF_SUCCESS, rc); + HCFLOGEXIT( HCF_TRACE_CMD_CPL ); + return rc; +} // cmd_cmpl + + +/************************************************************************************************************ + * + *.SUBMODULE int cmd_exe( IFBP ifbp, int cmd_code, int par_0 ) + *.PURPOSE Executes synchronous part of Hermes Command and - optionally - waits for Command Completion. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * cmd_code + * par_0 + * + *.RETURNS + * IFB_DefunctStat + * HCF_ERR_DEFUNCT_CMD_SEQ + * HCF_SUCCESS + * HCF_ERR_TO_BE_ADDED <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< + * + *.DESCRIPTION + * Executes synchronous Hermes Command and waits for Command Completion + * + * The general HCF strategy is to wait for command completion. As a consequence: + * - the read of the busy bit before writing the command register is superfluous + * - the Hermes requirement that no Inquiry command may be executed if there is still an unacknowledged + * Inquiry command outstanding, is automatically met. + * The Tx command uses the "Busy" bit in the cmd_code parameter to deviate from this general HCF strategy. + * The idea is that by not busy-waiting on completion of this frequently used command the processor + * utilization is diminished while using the busy-wait on all other seldom used commands the flow is kept + * simple. + * + * + * + *.DIAGRAM + * + *1: skip the body of cmd_exe when in defunct mode or when - based on the S/W Support register write and + * read back test - there is apparently no NIC. + * Note: we gave up on the "old" strategy to write the S/W Support register at magic only when needed. Due to + * the intricateness of Hermes F/W varieties ( which behave differently as far as corruption of the S/W + * Support register is involved), the increasing number of Hermes commands which do an implicit initialize + * (thus modifying the S/W Support register) and the workarounds of some OS/Support S/W induced aspects (e.g. + * the System Soft library at WinNT which postpones the actual mapping of I/O space up to 30 seconds after + * giving the go-ahead), the "magic" strategy is now reduced to a simple write and read back. This means that + * problems like a bug tramping over the memory mapped Hermes registers will no longer be noticed as side + * effect of the S/W Support register check. + *2: check whether the preceding command skipped the busy wait and if so, check for command completion + * + *.NOTICE + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int -cmd_exe( IFBP ifbp, hcf_16 cmd_code, hcf_16 par_0 ) //if HCMD_BUSY of cmd_code set, then do NOT wait for completion +cmd_exe( IFBP ifbp, hcf_16 cmd_code, hcf_16 par_0 ) //if HCMD_BUSY of cmd_code set, then do NOT wait for completion { -int rc; + int rc; HCFLOGENTRY( HCF_TRACE_CMD_EXE, cmd_code ); HCFASSERT( (cmd_code & HCMD_CMD_CODE) != HCMD_TX || cmd_code & HCMD_BUSY, cmd_code ); //Tx must have Busy bit set OPW( HREG_SW_0, HCF_MAGIC ); - if ( IPW( HREG_SW_0 ) == HCF_MAGIC ) { /* 1 */ + if ( IPW( HREG_SW_0 ) == HCF_MAGIC ) { /* 1 */ rc = ifbp->IFB_DefunctStat; } else rc = HCF_ERR_NO_NIC; if ( rc == HCF_SUCCESS ) { //;?is this a hot idea, better MEASURE performance impact -/*2*/ if ( ifbp->IFB_Cmd & HCMD_BUSY ) { + /*2*/ if ( ifbp->IFB_Cmd & HCMD_BUSY ) { rc = cmd_cmpl( ifbp ); } OPW( HREG_PARAM_0, par_0 ); OPW( HREG_CMD, cmd_code &~HCMD_BUSY ); ifbp->IFB_Cmd = cmd_code; - if ( (cmd_code & HCMD_BUSY) == 0 ) { //;?is this a hot idea, better MEASURE performance impact + if ( (cmd_code & HCMD_BUSY) == 0 ) { //;?is this a hot idea, better MEASURE performance impact rc = cmd_cmpl( ifbp ); } } @@ -3732,72 +3732,72 @@ int rc; /************************************************************************************************************ -* -*.SUBMODULE int download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ) -*.PURPOSE downloads F/W image into NIC and initiates execution of the downloaded F/W. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* ltvp specifies the pseudo-RID (as defined by WCI) -* -*.RETURNS -* -*.DESCRIPTION -* -* -*.DIAGRAM -*1: First, Ack everything to unblock a (possibly) blocked cmd pipe line -* Note 1: it is very likely that an Alloc event is pending and very well possible that a (Send) Cmd event is -* pending -* Note 2: it is assumed that this strategy takes away the need to ack every conceivable event after an -* Hermes Initialize -* -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ) + *.PURPOSE downloads F/W image into NIC and initiates execution of the downloaded F/W. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * ltvp specifies the pseudo-RID (as defined by WCI) + * + *.RETURNS + * + *.DESCRIPTION + * + * + *.DIAGRAM + *1: First, Ack everything to unblock a (possibly) blocked cmd pipe line + * Note 1: it is very likely that an Alloc event is pending and very well possible that a (Send) Cmd event is + * pending + * Note 2: it is assumed that this strategy takes away the need to ack every conceivable event after an + * Hermes Initialize + * + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int -download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ) //Hermes-II download (volatile only) +download( IFBP ifbp, CFG_PROG_STRCT FAR *ltvp ) //Hermes-II download (volatile only) { -hcf_16 i; -int rc = HCF_SUCCESS; -wci_bufp cp; -hcf_io io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; + hcf_16 i; + int rc = HCF_SUCCESS; + wci_bufp cp; + hcf_io io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; HCFLOGENTRY( HCF_TRACE_DL, ltvp->typ ); #if (HCF_TYPE) & HCF_TYPE_PRELOADED HCFASSERT( DO_ASSERT, ltvp->mode ); #else - //if initial "program" LTV + //if initial "program" LTV if ( ifbp->IFB_DLMode == CFG_PROG_STOP && ltvp->mode == CFG_PROG_VOLATILE) { - //. switch Hermes to initial mode -/*1*/ OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); - rc = cmd_exe( ifbp, HCMD_INI, 0 ); /* HCMD_INI can not be part of init() because that is called on - * other occasions as well */ + //. switch Hermes to initial mode + /*1*/ OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); + rc = cmd_exe( ifbp, HCMD_INI, 0 ); /* HCMD_INI can not be part of init() because that is called on + * other occasions as well */ rc = init( ifbp ); } - //if final "program" LTV + //if final "program" LTV if ( ltvp->mode == CFG_PROG_STOP && ifbp->IFB_DLMode == CFG_PROG_VOLATILE) { - //. start tertiary (or secondary) + //. start tertiary (or secondary) OPW( HREG_PARAM_1, (hcf_16)(ltvp->nic_addr >> 16) ); rc = cmd_exe( ifbp, HCMD_EXECUTE, (hcf_16) ltvp->nic_addr ); if (rc == HCF_SUCCESS) { - rc = init( ifbp ); /*;? do we really want to skip init if cmd_exe failed, i.e. - * IFB_FW_Comp_Id is than possibly incorrect */ - } - //else (non-final) + rc = init( ifbp ); /*;? do we really want to skip init if cmd_exe failed, i.e. + * IFB_FW_Comp_Id is than possibly incorrect */ + } + //else (non-final) } else { - //. if mode == Readback SEEPROM -#if 0 //;? as long as the next if contains a hard coded 0, might as well leave it out even more obvious + //. if mode == Readback SEEPROM +#if 0 //;? as long as the next if contains a hard coded 0, might as well leave it out even more obvious if ( 0 /*len is definitely not want we want;?*/ && ltvp->mode == CFG_PROG_SEEPROM_READBACK ) { OPW( HREG_PARAM_1, (hcf_16)(ltvp->nic_addr >> 16) ); OPW( HREG_PARAM_2, MUL_BY_2(ltvp->len - 4)); - //. . perform Hermes prog cmd with appropriate mode bits + //. . perform Hermes prog cmd with appropriate mode bits rc = cmd_exe( ifbp, HCMD_PROGRAM | ltvp->mode, (hcf_16)ltvp->nic_addr ); - //. . set up NIC RAM addressability according Resp0-1 + //. . set up NIC RAM addressability according Resp0-1 OPW( HREG_AUX_PAGE, IPW( HREG_RESP_1) ); OPW( HREG_AUX_OFFSET, IPW( HREG_RESP_0) ); - //. . set up L-field of LTV according Resp2 + //. . set up L-field of LTV according Resp2 i = ( IPW( HREG_RESP_2 ) + 1 ) / 2; // i contains max buffer size in words, a probably not very useful piece of information ;? /*Nico's code based on i is the "real amount of data available" if ( ltvp->len - 4 < i ) rc = HCF_ERR_LEN; @@ -3810,28 +3810,28 @@ hcf_io io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; ltvp->len = i + 4; } */ - //. . copy data from NIC via AUX port to LTV - cp = (wci_bufp)ltvp->host_addr; /*IN_PORT_STRING_8_16 macro may modify its parameters*/ + //. . copy data from NIC via AUX port to LTV + cp = (wci_bufp)ltvp->host_addr; /*IN_PORT_STRING_8_16 macro may modify its parameters*/ i = ltvp->len - 4; - IN_PORT_STRING_8_16( io_port, cp, i ); //!!!WORD length, cp MUST be a char pointer // $$ char - //. else (non-final programming) + IN_PORT_STRING_8_16( io_port, cp, i ); //!!!WORD length, cp MUST be a char pointer // $$ char + //. else (non-final programming) } else #endif //;? as long as the above if contains a hard coded 0, might as well leave it out even more obvious - { //. . get number of words to program + { //. . get number of words to program HCFASSERT( ltvp->segment_size, *ltvp->host_addr ); i = ltvp->segment_size/2; - //. . copy data (words) from LTV via AUX port to NIC - cp = (wci_bufp)ltvp->host_addr; //OUT_PORT_STRING_8_16 macro may modify its parameters - //. . if mode == volatile programming + //. . copy data (words) from LTV via AUX port to NIC + cp = (wci_bufp)ltvp->host_addr; //OUT_PORT_STRING_8_16 macro may modify its parameters + //. . if mode == volatile programming if ( ltvp->mode == CFG_PROG_VOLATILE ) { - //. . . set up NIC RAM addressability via AUX port + //. . . set up NIC RAM addressability via AUX port OPW( HREG_AUX_PAGE, (hcf_16)(ltvp->nic_addr >> 16 << 9 | (ltvp->nic_addr & 0xFFFF) >> 7 ) ); OPW( HREG_AUX_OFFSET, (hcf_16)(ltvp->nic_addr & 0x007E) ); - OUT_PORT_STRING_8_16( io_port, cp, i ); //!!!WORD length, cp MUST be a char pointer + OUT_PORT_STRING_8_16( io_port, cp, i ); //!!!WORD length, cp MUST be a char pointer } } } - ifbp->IFB_DLMode = ltvp->mode; //save state in IFB_DLMode + ifbp->IFB_DLMode = ltvp->mode; //save state in IFB_DLMode #endif // HCF_TYPE_PRELOADED HCFASSERT( rc == HCF_SUCCESS, rc ); HCFLOGEXIT( HCF_TRACE_DL ); @@ -3841,82 +3841,82 @@ hcf_io io_port = ifbp->IFB_IOBase + HREG_AUX_DATA; #if (HCF_ASSERT) & HCF_ASSERT_PRINTF /************************************************** -* Certain Hermes-II firmware versions can generate -* debug information. This debug information is -* contained in a buffer in nic-RAM, and can be read -* via the aux port. -**************************************************/ + * Certain Hermes-II firmware versions can generate + * debug information. This debug information is + * contained in a buffer in nic-RAM, and can be read + * via the aux port. + **************************************************/ HCF_STATIC int fw_printf(IFBP ifbp, CFG_FW_PRINTF_STRCT FAR *ltvp) { - int rc = HCF_SUCCESS; - hcf_16 fw_cnt; -// hcf_32 DbMsgBuffer = 0x29D2, DbMsgCount= 0x000029D0; -// hcf_16 DbMsgSize=0x00000080; - hcf_32 DbMsgBuffer; - CFG_FW_PRINTF_BUFFER_LOCATION_STRCT *p = &ifbp->IFB_FwPfBuff; - ltvp->len = 1; - if ( p->DbMsgSize != 0 ) { - // first, check the counter in nic-RAM and compare it to the latest counter value of the HCF - OPW( HREG_AUX_PAGE, (hcf_16)(p->DbMsgCount >> 7) ); - OPW( HREG_AUX_OFFSET, (hcf_16)(p->DbMsgCount & 0x7E) ); - fw_cnt = ((IPW( HREG_AUX_DATA) >>1 ) & ((hcf_16)p->DbMsgSize - 1)); - if ( fw_cnt != ifbp->IFB_DbgPrintF_Cnt ) { -// DbgPrint("fw_cnt=%d IFB_DbgPrintF_Cnt=%d\n", fw_cnt, ifbp->IFB_DbgPrintF_Cnt); - DbMsgBuffer = p->DbMsgBuffer + ifbp->IFB_DbgPrintF_Cnt * 6; // each entry is 3 words - OPW( HREG_AUX_PAGE, (hcf_16)(DbMsgBuffer >> 7) ); - OPW( HREG_AUX_OFFSET, (hcf_16)(DbMsgBuffer & 0x7E) ); - ltvp->msg_id = IPW(HREG_AUX_DATA); - ltvp->msg_par = IPW(HREG_AUX_DATA); - ltvp->msg_tstamp = IPW(HREG_AUX_DATA); - ltvp->len = 4; - ifbp->IFB_DbgPrintF_Cnt++; - ifbp->IFB_DbgPrintF_Cnt &= (p->DbMsgSize - 1); - } - } - return rc; + int rc = HCF_SUCCESS; + hcf_16 fw_cnt; +// hcf_32 DbMsgBuffer = 0x29D2, DbMsgCount= 0x000029D0; +// hcf_16 DbMsgSize=0x00000080; + hcf_32 DbMsgBuffer; + CFG_FW_PRINTF_BUFFER_LOCATION_STRCT *p = &ifbp->IFB_FwPfBuff; + ltvp->len = 1; + if ( p->DbMsgSize != 0 ) { + // first, check the counter in nic-RAM and compare it to the latest counter value of the HCF + OPW( HREG_AUX_PAGE, (hcf_16)(p->DbMsgCount >> 7) ); + OPW( HREG_AUX_OFFSET, (hcf_16)(p->DbMsgCount & 0x7E) ); + fw_cnt = ((IPW( HREG_AUX_DATA) >>1 ) & ((hcf_16)p->DbMsgSize - 1)); + if ( fw_cnt != ifbp->IFB_DbgPrintF_Cnt ) { +// DbgPrint("fw_cnt=%d IFB_DbgPrintF_Cnt=%d\n", fw_cnt, ifbp->IFB_DbgPrintF_Cnt); + DbMsgBuffer = p->DbMsgBuffer + ifbp->IFB_DbgPrintF_Cnt * 6; // each entry is 3 words + OPW( HREG_AUX_PAGE, (hcf_16)(DbMsgBuffer >> 7) ); + OPW( HREG_AUX_OFFSET, (hcf_16)(DbMsgBuffer & 0x7E) ); + ltvp->msg_id = IPW(HREG_AUX_DATA); + ltvp->msg_par = IPW(HREG_AUX_DATA); + ltvp->msg_tstamp = IPW(HREG_AUX_DATA); + ltvp->len = 4; + ifbp->IFB_DbgPrintF_Cnt++; + ifbp->IFB_DbgPrintF_Cnt &= (p->DbMsgSize - 1); + } + } + return rc; }; #endif // HCF_ASSERT_PRINTF #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.SUBMODULE hcf_16 get_fid( IFBP ifbp ) -*.PURPOSE get allocated FID for either transmit or notify. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* 0 no FID available -* <>0 FID number -* -*.DESCRIPTION -* -* -*.DIAGRAM -* The preference is to use a "pending" alloc. If no alloc is pending, then - if available - the "spare" FID -* is used. -* If the spare FID is used, IFB_RscInd (representing the spare FID) must be cleared -* If the pending alloc is used, the alloc event must be acknowledged to the Hermes. -* In case the spare FID was depleted and the IFB_RscInd has been "faked" as pseudo resource with a 0x0001 -* value by hcf_service_nic, IFB_RscInd has to be "corrected" again to its 0x0000 value. -* -* Note that due to the Hermes-II H/W problems which are intended to be worked around by DAWA, the Alloc bit -* in the Event register is no longer a reliable indication of the presence/absence of a FID. The "Clear FID" -* part of the DAWA logic, together with the choice of the definition of the return information from get_fid, -* handle this automatically, i.e. without additional code in get_fid. -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE hcf_16 get_fid( IFBP ifbp ) + *.PURPOSE get allocated FID for either transmit or notify. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * 0 no FID available + * <>0 FID number + * + *.DESCRIPTION + * + * + *.DIAGRAM + * The preference is to use a "pending" alloc. If no alloc is pending, then - if available - the "spare" FID + * is used. + * If the spare FID is used, IFB_RscInd (representing the spare FID) must be cleared + * If the pending alloc is used, the alloc event must be acknowledged to the Hermes. + * In case the spare FID was depleted and the IFB_RscInd has been "faked" as pseudo resource with a 0x0001 + * value by hcf_service_nic, IFB_RscInd has to be "corrected" again to its 0x0000 value. + * + * Note that due to the Hermes-II H/W problems which are intended to be worked around by DAWA, the Alloc bit + * in the Event register is no longer a reliable indication of the presence/absence of a FID. The "Clear FID" + * part of the DAWA logic, together with the choice of the definition of the return information from get_fid, + * handle this automatically, i.e. without additional code in get_fid. + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC hcf_16 get_fid( IFBP ifbp ) { -hcf_16 fid = 0; + hcf_16 fid = 0; #if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0 -PROT_CNT_INI; + PROT_CNT_INI; #endif // HCF_TYPE_HII5 IF_DMA( HCFASSERT(!(ifbp->IFB_CntlOpt & USE_DMA), ifbp->IFB_CntlOpt) ); @@ -3929,7 +3929,7 @@ PROT_CNT_INI; HCF_WAIT_WHILE( ( IPW( HREG_EV_STAT ) & HREG_EV_ACK_REG_READY ) == 0 ); HCFASSERT( prot_cnt, IPW( HREG_EV_STAT ) ); #endif // HCF_TYPE_HII5 - DAWA_ACK( HREG_EV_ALLOC ); //!!note that HREG_EV_ALLOC is written only once + DAWA_ACK( HREG_EV_ALLOC ); //!!note that HREG_EV_ALLOC is written only once // 180 degree error in logic ;? #if ALLOC_15 if ( ifbp->IFB_RscInd == 1 ) { ifbp->IFB_RscInd = 0; @@ -3947,100 +3947,100 @@ PROT_CNT_INI; /************************************************************************************************************ -* -*.SUBMODULE void get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) -*.PURPOSE reads with 16/32 bit I/O via BAP1 port from NIC RAM to Host memory. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* bufp (byte) address of buffer -* len length in bytes of buffer specified by bufp -* word_len Big Endian only: number of leading bytes to swap in pairs -* -*.RETURNS N.A. -* -*.DESCRIPTION -* process the single byte (if applicable) read by the previous get_frag and copy len (or len-1) bytes from -* NIC to bufp. -* On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianess is -* converted (i.e. byte swapped) -* -* -*.DIAGRAM -*10: The PCMCIA card can be removed in the middle of the transfer. By depositing a "magic number" in the -* HREG_SW_0 register of the Hermes at initialization time and by verifying this register, it can be -* determined whether the card is still present. The return status is set accordingly. -* Clearing the buffer is a (relative) cheap way to prevent that failing I/O results in run-away behavior -* because the garbage in the buffer is interpreted by the caller irrespective of the return status (e.g. -* hcf_service_nic has this behavior). -* -*.NOTICE -* It turns out DOS ODI uses zero length fragments. The HCF code can cope with it, but as a consequence, no -* Assert on len is possible -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) + *.PURPOSE reads with 16/32 bit I/O via BAP1 port from NIC RAM to Host memory. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * bufp (byte) address of buffer + * len length in bytes of buffer specified by bufp + * word_len Big Endian only: number of leading bytes to swap in pairs + * + *.RETURNS N.A. + * + *.DESCRIPTION + * process the single byte (if applicable) read by the previous get_frag and copy len (or len-1) bytes from + * NIC to bufp. + * On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianess is + * converted (i.e. byte swapped) + * + * + *.DIAGRAM + *10: The PCMCIA card can be removed in the middle of the transfer. By depositing a "magic number" in the + * HREG_SW_0 register of the Hermes at initialization time and by verifying this register, it can be + * determined whether the card is still present. The return status is set accordingly. + * Clearing the buffer is a (relative) cheap way to prevent that failing I/O results in run-away behavior + * because the garbage in the buffer is interpreted by the caller irrespective of the return status (e.g. + * hcf_service_nic has this behavior). + * + *.NOTICE + * It turns out DOS ODI uses zero length fragments. The HCF code can cope with it, but as a consequence, no + * Assert on len is possible + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC void get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) { -hcf_io io_port = ifbp->IFB_IOBase + HREG_DATA_1; //BAP data register -wci_bufp p = bufp; //working pointer -int i; //prevent side effects from macro -int j; + hcf_io io_port = ifbp->IFB_IOBase + HREG_DATA_1; //BAP data register + wci_bufp p = bufp; //working pointer + int i; //prevent side effects from macro + int j; HCFASSERT( ((hcf_32)bufp & (HCF_ALIGN-1) ) == 0, (hcf_32)bufp ); -/*1: here recovery logic for intervening BAP access between hcf_service_nic and hcf_rcv_msg COULD be added - * if current access is RxInitial - * . persistent_offset += len +/*1: here recovery logic for intervening BAP access between hcf_service_nic and hcf_rcv_msg COULD be added + * if current access is RxInitial + * . persistent_offset += len */ i = len; - //if buffer length > 0 and carry from previous get_frag + //if buffer length > 0 and carry from previous get_frag if ( i && ifbp->IFB_CarryIn ) { - //. move carry to buffer - //. adjust buffer length and pointer accordingly + //. move carry to buffer + //. adjust buffer length and pointer accordingly *p++ = (hcf_8)(ifbp->IFB_CarryIn>>8); i--; - //. clear carry flag + //. clear carry flag ifbp->IFB_CarryIn = 0; } #if (HCF_IO) & HCF_IO_32BITS //skip zero-length I/O, single byte I/O and I/O not worthwhile (i.e. less than 6 bytes)for DW logic - //if buffer length >= 6 and 32 bits I/O support + //if buffer length >= 6 and 32 bits I/O support if ( !(ifbp->IFB_CntlOpt & USE_16BIT) && i >= 6 ) { -hcf_32 FAR *p4; //prevent side effects from macro - if ( ( (hcf_32)p & 0x1 ) == 0 ) { //. if buffer at least word aligned - if ( (hcf_32)p & 0x2 ) { //. . if buffer not double word aligned - //. . . read single word to get double word aligned + hcf_32 FAR *p4; //prevent side effects from macro + if ( ( (hcf_32)p & 0x1 ) == 0 ) { //. if buffer at least word aligned + if ( (hcf_32)p & 0x2 ) { //. . if buffer not double word aligned + //. . . read single word to get double word aligned *(wci_recordp)p = IN_PORT_WORD( io_port ); - //. . . adjust buffer length and pointer accordingly + //. . . adjust buffer length and pointer accordingly p += 2; i -= 2; } - //. . read as many double word as possible + //. . read as many double word as possible p4 = (hcf_32 FAR *)p; j = i/4; IN_PORT_STRING_32( io_port, p4, j ); - //. . adjust buffer length and pointer accordingly + //. . adjust buffer length and pointer accordingly p += i & ~0x0003; i &= 0x0003; } } #endif // HCF_IO_32BITS - //if no 32-bit support OR byte aligned OR 1-3 bytes left + //if no 32-bit support OR byte aligned OR 1-3 bytes left if ( i ) { - //. read as many word as possible in "alignment safe" way + //. read as many word as possible in "alignment safe" way j = i/2; IN_PORT_STRING_8_16( io_port, p, j ); - //. if 1 byte left + //. if 1 byte left if ( i & 0x0001 ) { - //. . read 1 word + //. . read 1 word ifbp->IFB_CarryIn = IN_PORT_WORD( io_port ); - //. . store LSB in last char of buffer + //. . store LSB in last char of buffer bufp[len-1] = (hcf_8)ifbp->IFB_CarryIn; - //. . save MSB in carry, set carry flag + //. . save MSB in carry, set carry flag ifbp->IFB_CarryIn |= 0x1; } } @@ -4050,13 +4050,13 @@ hcf_32 FAR *p4; //prevent side effects from macro HCFASSERT( word_len <= len, MERGE2( word_len, len ) ); //see put_frag for an alternative implementation, but be careful about what are int's and what are //hcf_16's - if ( word_len ) { //. if there is anything to convert -hcf_8 c; - c = bufp[1]; //. . convert the 1st hcf_16 + if ( word_len ) { //. if there is anything to convert + hcf_8 c; + c = bufp[1]; //. . convert the 1st hcf_16 bufp[1] = bufp[0]; bufp[0] = c; - if ( word_len > 1 ) { //. . if there is to convert more than 1 word ( i.e 2 ) - c = bufp[3]; //. . . convert the 2nd hcf_16 + if ( word_len > 1 ) { //. . if there is to convert more than 1 word ( i.e 2 ) + c = bufp[3]; //. . . convert the 2nd hcf_16 bufp[3] = bufp[2]; bufp[2] = c; } @@ -4065,108 +4065,108 @@ hcf_8 c; } // get_frag /************************************************************************************************************ -* -*.SUBMODULE int init( IFBP ifbp ) -*.PURPOSE Handles common initialization aspects (H-I init, calibration, config.mngmt, allocation). -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS -* HCF_ERR_INCOMP_PRI -* HCF_ERR_INCOMP_FW -* HCF_ERR_TIME_OUT -* >>hcf_get_info -* HCF_ERR_NO_NIC -* HCF_ERR_LEN -* -*.DESCRIPTION -* init will successively: -* - in case of a (non-preloaded) H-I, initialize the NIC -* - calibrate the S/W protection timer against the Hermes Timer -* - collect HSI, "active" F/W Configuration Management Information -* - in case active F/W is Primary F/W: collect Primary F/W Configuration Management Information -* - check HSI and Primary F/W compatibility with the HCF -* - in case active F/W is Station or AP F/W: check Station or AP F/W compatibility with the HCF -* - in case active F/W is not Primary F/W: allocate FIDs to be used in transmit/notify process -* -* -*.DIAGRAM -*2: drop all error status bits in IFB_CardStat since they are expected to be re-evaluated. -*4: Ack everything except HREG_EV_SLEEP_REQ. It is very likely that an Alloc event is pending and -* very well possible that a Send Cmd event is pending. Acking HREG_EV_SLEEP_REQ is handled by hcf_action( -* HCF_ACT_INT_ON ) !!! -*10: Calibrate the S/W time-out protection mechanism by calling calibrate(). Note that possible errors -* in the calibration process are nor reported by init but will show up via the defunct mechanism in -* subsequent hcf-calls. -*14: usb_check_comp() is called to have the minimal visual clutter for the legacy H-I USB dongle -* compatibility check. -*16: The following configuration management related information is retrieved from the NIC: -* - HSI supplier -* - F/W Identity -* - F/W supplier -* if appropriate: -* - PRI Identity -* - PRI supplier -* appropriate means on H-I: always -* and on H-II if F/W supplier reflects a primary (i.e. only after an Hermes Reset or Init -* command). -* QUESTION ;? !!!!!! should, For each of the above RIDs the Endianess is converted to native Endianess. -* Only the return code of the first hcf_get_info is used. All hcf_get_info calls are made, regardless of -* the success or failure of the 1st hcf_get_info. The assumptions are: -* - if any call fails, they all fail, so remembering the result of the 1st call is adequate -* - a failing call will overwrite the L-field with a 0x0000 value, which services both as an -* error indication for the values cached in the IFB as making mmd_check_comp fail. -* In case of H-I, when getting the F/W identity fails, the F/W is assumed to be H-I AP F/W pre-dating -* version 9.0 and the F/W Identity and Supplier are faked accordingly. -* In case of H-II, the Primary, Station and AP Identity are merged into a single F/W Identity. -* The same applies to the Supplier information. As a consequence the PRI information can no longer be -* retrieved when a Tertiary runs. To accommodate MSFs and Utilities who depend on PRI information being -* available at any time, this information is cached in the IFB. In this cache the generic "F/W" value of -* the typ-fields is overwritten with the specific (legacy) "PRI" values. To actually re-route the (legacy) -* PRI request via hcf_get_info, the xxxx-table must be set. In case of H-I, this caching, modifying and -* re-routing is not needed because PRI information is always available directly from the NIC. For -* consistency the caching fields in the IFB are filled with the PRI information anyway. -*18: mdd_check_comp() is called to check the Supplier Variant and Range of the Host-S/W I/F (HSI) and the -* Primary Firmware Variant and Range against the Top and Bottom level supported by this HCF. If either of -* these tests fails, the CARD_STAT_INCOMP_PRI bit of IFB_CardStat is set -* Note: There should always be a primary except during production, so this makes the HCF in its current form -* unsuitable for manufacturing test systems like the FTS. This can be remedied by an adding a test like -* ifbp->IFB_PRISup.id == COMP_ID_PRI -*20: In case there is Tertiary F/W and this F/W is Station F/W, the Supplier Variant and Range of the Station -* Firmware function as retrieved from the Hermes is checked against the Top and Bottom level supported by -* this HCF. -* Note: ;? the tertiary F/W compatibility checks could be moved to the DHF, which already has checked the -* CFI and MFI compatibility of the image with the NIC before the image was downloaded. -*28: In case of non-Primary F/W: allocates and acknowledge a (TX or Notify) FID and allocates without -* acknowledge another (TX or Notify) FID (the so-called 1.5 alloc scheme) with the following steps: -* - execute the allocate command by calling cmd_exe -* - wait till either the alloc event or a time-out occurs -* - regardless whether the alloc event occurs, call get_fid to -* - read the FID and save it in IFB_RscInd to be used as "spare FID" -* - acknowledge the alloc event -* - do another "half" allocate to complete the "1.5 Alloc scheme" -* Note that above 3 steps do not harm and thus give the "cheapest" acceptable strategy. -* If a time-out occurred, then report time out status (after all) -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int init( IFBP ifbp ) + *.PURPOSE Handles common initialization aspects (H-I init, calibration, config.mngmt, allocation). + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS + * HCF_ERR_INCOMP_PRI + * HCF_ERR_INCOMP_FW + * HCF_ERR_TIME_OUT + * >>hcf_get_info + * HCF_ERR_NO_NIC + * HCF_ERR_LEN + * + *.DESCRIPTION + * init will successively: + * - in case of a (non-preloaded) H-I, initialize the NIC + * - calibrate the S/W protection timer against the Hermes Timer + * - collect HSI, "active" F/W Configuration Management Information + * - in case active F/W is Primary F/W: collect Primary F/W Configuration Management Information + * - check HSI and Primary F/W compatibility with the HCF + * - in case active F/W is Station or AP F/W: check Station or AP F/W compatibility with the HCF + * - in case active F/W is not Primary F/W: allocate FIDs to be used in transmit/notify process + * + * + *.DIAGRAM + *2: drop all error status bits in IFB_CardStat since they are expected to be re-evaluated. + *4: Ack everything except HREG_EV_SLEEP_REQ. It is very likely that an Alloc event is pending and + * very well possible that a Send Cmd event is pending. Acking HREG_EV_SLEEP_REQ is handled by hcf_action( + * HCF_ACT_INT_ON ) !!! + *10: Calibrate the S/W time-out protection mechanism by calling calibrate(). Note that possible errors + * in the calibration process are nor reported by init but will show up via the defunct mechanism in + * subsequent hcf-calls. + *14: usb_check_comp() is called to have the minimal visual clutter for the legacy H-I USB dongle + * compatibility check. + *16: The following configuration management related information is retrieved from the NIC: + * - HSI supplier + * - F/W Identity + * - F/W supplier + * if appropriate: + * - PRI Identity + * - PRI supplier + * appropriate means on H-I: always + * and on H-II if F/W supplier reflects a primary (i.e. only after an Hermes Reset or Init + * command). + * QUESTION ;? !!!!!! should, For each of the above RIDs the Endianess is converted to native Endianess. + * Only the return code of the first hcf_get_info is used. All hcf_get_info calls are made, regardless of + * the success or failure of the 1st hcf_get_info. The assumptions are: + * - if any call fails, they all fail, so remembering the result of the 1st call is adequate + * - a failing call will overwrite the L-field with a 0x0000 value, which services both as an + * error indication for the values cached in the IFB as making mmd_check_comp fail. + * In case of H-I, when getting the F/W identity fails, the F/W is assumed to be H-I AP F/W pre-dating + * version 9.0 and the F/W Identity and Supplier are faked accordingly. + * In case of H-II, the Primary, Station and AP Identity are merged into a single F/W Identity. + * The same applies to the Supplier information. As a consequence the PRI information can no longer be + * retrieved when a Tertiary runs. To accommodate MSFs and Utilities who depend on PRI information being + * available at any time, this information is cached in the IFB. In this cache the generic "F/W" value of + * the typ-fields is overwritten with the specific (legacy) "PRI" values. To actually re-route the (legacy) + * PRI request via hcf_get_info, the xxxx-table must be set. In case of H-I, this caching, modifying and + * re-routing is not needed because PRI information is always available directly from the NIC. For + * consistency the caching fields in the IFB are filled with the PRI information anyway. + *18: mdd_check_comp() is called to check the Supplier Variant and Range of the Host-S/W I/F (HSI) and the + * Primary Firmware Variant and Range against the Top and Bottom level supported by this HCF. If either of + * these tests fails, the CARD_STAT_INCOMP_PRI bit of IFB_CardStat is set + * Note: There should always be a primary except during production, so this makes the HCF in its current form + * unsuitable for manufacturing test systems like the FTS. This can be remedied by an adding a test like + * ifbp->IFB_PRISup.id == COMP_ID_PRI + *20: In case there is Tertiary F/W and this F/W is Station F/W, the Supplier Variant and Range of the Station + * Firmware function as retrieved from the Hermes is checked against the Top and Bottom level supported by + * this HCF. + * Note: ;? the tertiary F/W compatibility checks could be moved to the DHF, which already has checked the + * CFI and MFI compatibility of the image with the NIC before the image was downloaded. + *28: In case of non-Primary F/W: allocates and acknowledge a (TX or Notify) FID and allocates without + * acknowledge another (TX or Notify) FID (the so-called 1.5 alloc scheme) with the following steps: + * - execute the allocate command by calling cmd_exe + * - wait till either the alloc event or a time-out occurs + * - regardless whether the alloc event occurs, call get_fid to + * - read the FID and save it in IFB_RscInd to be used as "spare FID" + * - acknowledge the alloc event + * - do another "half" allocate to complete the "1.5 Alloc scheme" + * Note that above 3 steps do not harm and thus give the "cheapest" acceptable strategy. + * If a time-out occurred, then report time out status (after all) + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int init( IFBP ifbp ) { -int rc = HCF_SUCCESS; + int rc = HCF_SUCCESS; HCFLOGENTRY( HCF_TRACE_INIT, 0 ); - ifbp->IFB_CardStat = 0; /* 2*/ - OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); /* 4*/ - IF_PROT_TIME( calibrate( ifbp ) ); /*10*/ + ifbp->IFB_CardStat = 0; /* 2*/ + OPW( HREG_EV_ACK, ~HREG_EV_SLEEP_REQ ); /* 4*/ + IF_PROT_TIME( calibrate( ifbp ) ); /*10*/ #if 0 // OOR - ifbp->IFB_FWIdentity.len = 2; //misuse the IFB space for a put + ifbp->IFB_FWIdentity.len = 2; //misuse the IFB space for a put ifbp->IFB_FWIdentity.typ = CFG_TICK_TIME; - ifbp->IFB_FWIdentity.comp_id = (1000*1000)/1024 + 1; //roughly 1 second + ifbp->IFB_FWIdentity.comp_id = (1000*1000)/1024 + 1; //roughly 1 second hcf_put_info( ifbp, (LTVP)&ifbp->IFB_FWIdentity.len ); #endif // OOR ifbp->IFB_FWIdentity.len = sizeof(CFG_FW_IDENTITY_STRCT)/sizeof(hcf_16) - 1; @@ -4179,8 +4179,8 @@ int rc = HCF_SUCCESS; ifbp->IFB_FWIdentity.version_major = CNV_LITTLE_TO_SHORT( ifbp->IFB_FWIdentity.version_major ); ifbp->IFB_FWIdentity.version_minor = CNV_LITTLE_TO_SHORT( ifbp->IFB_FWIdentity.version_minor ); #endif // HCF_BIG_ENDIAN -#if defined MSF_COMPONENT_ID /*14*/ - if ( rc == HCF_SUCCESS ) { /*16*/ +#if defined MSF_COMPONENT_ID /*14*/ + if ( rc == HCF_SUCCESS ) { /*16*/ ifbp->IFB_HSISup.len = sizeof(CFG_SUP_RANGE_STRCT)/sizeof(hcf_16) - 1; ifbp->IFB_HSISup.typ = CFG_NIC_HSI_SUP_RANGE; rc = hcf_get_info( ifbp, (LTVP)&ifbp->IFB_HSISup.len ); @@ -4207,41 +4207,41 @@ int rc = HCF_SUCCESS; ifbp->IFB_FWSup.top = CNV_LITTLE_TO_SHORT( ifbp->IFB_FWSup.top ); #endif // HCF_BIG_ENDIAN - if ( ifbp->IFB_FWSup.id == COMP_ID_PRI ) { /* 20*/ -int i = sizeof( CFG_FW_IDENTITY_STRCT) + sizeof(CFG_SUP_RANGE_STRCT ); + if ( ifbp->IFB_FWSup.id == COMP_ID_PRI ) { /* 20*/ + int i = sizeof( CFG_FW_IDENTITY_STRCT) + sizeof(CFG_SUP_RANGE_STRCT ); while ( i-- ) ((hcf_8*)(&ifbp->IFB_PRIIdentity))[i] = ((hcf_8*)(&ifbp->IFB_FWIdentity))[i]; ifbp->IFB_PRIIdentity.typ = CFG_PRI_IDENTITY; ifbp->IFB_PRISup.typ = CFG_PRI_SUP_RANGE; xxxx[xxxx_PRI_IDENTITY_OFFSET] = &ifbp->IFB_PRIIdentity.len; xxxx[xxxx_PRI_IDENTITY_OFFSET+1] = &ifbp->IFB_PRISup.len; } - if ( !mmd_check_comp( (void*)&cfg_drv_act_ranges_hsi, &ifbp->IFB_HSISup) /* 22*/ + if ( !mmd_check_comp( (void*)&cfg_drv_act_ranges_hsi, &ifbp->IFB_HSISup) /* 22*/ #if ( (HCF_TYPE) & HCF_TYPE_PRELOADED ) == 0 //;? the PRI compatibility check is only relevant for DHF - || !mmd_check_comp( (void*)&cfg_drv_act_ranges_pri, &ifbp->IFB_PRISup) + || !mmd_check_comp( (void*)&cfg_drv_act_ranges_pri, &ifbp->IFB_PRISup) #endif // HCF_TYPE_PRELOADED - ) { + ) { ifbp->IFB_CardStat = CARD_STAT_INCOMP_PRI; rc = HCF_ERR_INCOMP_PRI; } - if ( ( ifbp->IFB_FWSup.id == COMP_ID_STA && !mmd_check_comp( (void*)&cfg_drv_act_ranges_sta, &ifbp->IFB_FWSup) ) || - ( ifbp->IFB_FWSup.id == COMP_ID_APF && !mmd_check_comp( (void*)&cfg_drv_act_ranges_apf, &ifbp->IFB_FWSup) ) - ) { /* 24 */ + if ( ( ifbp->IFB_FWSup.id == COMP_ID_STA && !mmd_check_comp( (void*)&cfg_drv_act_ranges_sta, &ifbp->IFB_FWSup) ) || + ( ifbp->IFB_FWSup.id == COMP_ID_APF && !mmd_check_comp( (void*)&cfg_drv_act_ranges_apf, &ifbp->IFB_FWSup) ) + ) { /* 24 */ ifbp->IFB_CardStat |= CARD_STAT_INCOMP_FW; rc = HCF_ERR_INCOMP_FW; } } #endif // MSF_COMPONENT_ID -#if (HCF_DL_ONLY) == 0 /* 28 */ +#if (HCF_DL_ONLY) == 0 /* 28 */ if ( rc == HCF_SUCCESS && ifbp->IFB_FWIdentity.comp_id >= COMP_ID_FW_STA ) { -PROT_CNT_INI; + PROT_CNT_INI; /************************************************************************************** - * rlav: the DMA engine needs the host to cause a 'hanging alloc event' for it to consume. - * not sure if this is the right spot in the HCF, thinking about hcf_enable... - **************************************************************************************/ + * rlav: the DMA engine needs the host to cause a 'hanging alloc event' for it to consume. + * not sure if this is the right spot in the HCF, thinking about hcf_enable... + **************************************************************************************/ rc = cmd_exe( ifbp, HCMD_ALLOC, 0 ); // 180 degree error in logic ;? #if ALLOC_15 -// ifbp->IFB_RscInd = 1; //let's hope that by the time hcf_send_msg isa called, there will be a FID +// ifbp->IFB_RscInd = 1; //let's hope that by the time hcf_send_msg isa called, there will be a FID //#else if ( rc == HCF_SUCCESS ) { HCF_WAIT_WHILE( (IPW( HREG_EV_STAT ) & HREG_EV_ALLOC) == 0 ); @@ -4266,74 +4266,74 @@ PROT_CNT_INI; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.SUBMODULE void isr_info( IFBP ifbp ) -*.PURPOSE handles link events. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS N.A. -* -*.DESCRIPTION -* -* -*.DIAGRAM -*1: First the FID number corresponding with the InfoEvent is determined. -* Note the complication of the zero-FID protection sub-scheme in DAWA. -* Next the L-field and the T-field are fetched into scratch buffer info. -*2: In case of tallies, the 16 bits Hermes values are accumulated in the IFB into 32 bits values. Info[0] -* is (expected to be) HCF_NIC_TAL_CNT + 1. The contraption "while ( info[0]-- >1 )" rather than -* "while ( --info[0] )" is used because it is dangerous to determine the length of the Value field by -* decrementing info[0]. As a result of a bug in some version of the F/W, info[0] may be 0, resulting -* in a very long loop in the pre-decrement logic. -*4: In case of a link status frame, the information is copied to the IFB field IFB_linkStat -*6: All other than Tallies (including "unknown" ones) are checked against the selection set by the MSF -* via CFG_RID_LOG. If a match is found or the selection set has the wild-card type (i.e non-NULL buffer -* pointer at the terminating zero-type), the frame is copied to the (type-specific) log buffer. -* Note that to accumulate tallies into IFB AND to log them or to log a frame when a specific match occures -* AND based on the wild-card selection, you have to call setup_bap again after the 1st copy. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void isr_info( IFBP ifbp ) + *.PURPOSE handles link events. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS N.A. + * + *.DESCRIPTION + * + * + *.DIAGRAM + *1: First the FID number corresponding with the InfoEvent is determined. + * Note the complication of the zero-FID protection sub-scheme in DAWA. + * Next the L-field and the T-field are fetched into scratch buffer info. + *2: In case of tallies, the 16 bits Hermes values are accumulated in the IFB into 32 bits values. Info[0] + * is (expected to be) HCF_NIC_TAL_CNT + 1. The contraption "while ( info[0]-- >1 )" rather than + * "while ( --info[0] )" is used because it is dangerous to determine the length of the Value field by + * decrementing info[0]. As a result of a bug in some version of the F/W, info[0] may be 0, resulting + * in a very long loop in the pre-decrement logic. + *4: In case of a link status frame, the information is copied to the IFB field IFB_linkStat + *6: All other than Tallies (including "unknown" ones) are checked against the selection set by the MSF + * via CFG_RID_LOG. If a match is found or the selection set has the wild-card type (i.e non-NULL buffer + * pointer at the terminating zero-type), the frame is copied to the (type-specific) log buffer. + * Note that to accumulate tallies into IFB AND to log them or to log a frame when a specific match occures + * AND based on the wild-card selection, you have to call setup_bap again after the 1st copy. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC void isr_info( IFBP ifbp ) { -hcf_16 info[2], fid; + hcf_16 info[2], fid; #if (HCF_EXT) & HCF_EXT_INFO_LOG -RID_LOGP ridp = ifbp->IFB_RIDLogp; //NULL or pointer to array of RID_LOG structures (terminated by zero typ) + RID_LOGP ridp = ifbp->IFB_RIDLogp; //NULL or pointer to array of RID_LOG structures (terminated by zero typ) #endif // HCF_EXT_INFO_LOG - HCFTRACE( ifbp, HCF_TRACE_ISR_INFO ); /* 1 */ + HCFTRACE( ifbp, HCF_TRACE_ISR_INFO ); /* 1 */ fid = IPW( HREG_INFO_FID ); DAWA_ZERO_FID( HREG_INFO_FID ); if ( fid ) { (void)setup_bap( ifbp, fid, 0, IO_IN ); get_frag( ifbp, (wci_bufp)info, 4 BE_PAR(2) ); HCFASSERT( info[0] <= HCF_MAX_LTV + 1, MERGE_2( info[1], info[0] ) ); //;? a smaller value makes more sense -#if (HCF_TALLIES) & HCF_TALLIES_NIC //Hermes tally support +#if (HCF_TALLIES) & HCF_TALLIES_NIC //Hermes tally support if ( info[1] == CFG_TALLIES ) { -hcf_32 *p; -/*2*/ if ( info[0] > HCF_NIC_TAL_CNT ) { + hcf_32 *p; + /*2*/ if ( info[0] > HCF_NIC_TAL_CNT ) { info[0] = HCF_NIC_TAL_CNT + 1; } p = (hcf_32*)&ifbp->IFB_NIC_Tallies; - while ( info[0]-- >1 ) *p++ += IPW( HREG_DATA_1 ); //request may return zero length + while ( info[0]-- >1 ) *p++ += IPW( HREG_DATA_1 ); //request may return zero length } else #endif // HCF_TALLIES_NIC { -/*4*/ if ( info[1] == CFG_LINK_STAT ) { + /*4*/ if ( info[1] == CFG_LINK_STAT ) { ifbp->IFB_LinkStat = IPW( HREG_DATA_1 ); } #if (HCF_EXT) & HCF_EXT_INFO_LOG -/*6*/ while ( 1 ) { + /*6*/ while ( 1 ) { if ( ridp->typ == 0 || ridp->typ == info[1] ) { if ( ridp->bufp ) { HCFASSERT( ridp->len >= 2, ridp->typ ); - ridp->bufp[0] = min((hcf_16)(ridp->len - 1), info[0] ); //save L - ridp->bufp[1] = info[1]; //save T + ridp->bufp[0] = min((hcf_16)(ridp->len - 1), info[0] ); //save L + ridp->bufp[1] = info[1]; //save T get_frag( ifbp, (wci_bufp)&ridp->bufp[2], (ridp->bufp[0] - 1)*2 BE_PAR(0) ); } break; @@ -4351,79 +4351,79 @@ hcf_32 *p; // // // #endif // HCF_TALLIES_NIC -// /*4*/ if ( info[1] == CFG_LINK_STAT ) { -// ifbp->IFB_DSLinkStat = IPW( HREG_DATA_1 ) | CFG_LINK_STAT_CHANGE; //corrupts BAP !! ;? -// ifbp->IFB_LinkStat = ifbp->IFB_DSLinkStat & CFG_LINK_STAT_FW; //;? to be obsoleted -// printk( "<4>linkstatus: %04x\n", ifbp->IFB_DSLinkStat ); //;?remove me 1 day +// /*4*/ if ( info[1] == CFG_LINK_STAT ) { +// ifbp->IFB_DSLinkStat = IPW( HREG_DATA_1 ) | CFG_LINK_STAT_CHANGE; //corrupts BAP !! ;? +// ifbp->IFB_LinkStat = ifbp->IFB_DSLinkStat & CFG_LINK_STAT_FW; //;? to be obsoleted +// printk( "<4>linkstatus: %04x\n", ifbp->IFB_DSLinkStat ); //;?remove me 1 day // #if (HCF_SLEEP) & HCF_DDS -// if ( ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_CONNECTED ) == 0 ) { //even values are disconnected etc. -// ifbp->IFB_TickCnt = 0; //start 2 second period (with 1 tick uncertanty) -// printk( "<5>isr_info: AwaitConnection phase started, IFB_TickCnt = 0\n" ); //;?remove me 1 day -// } +// if ( ( ifbp->IFB_DSLinkStat & CFG_LINK_STAT_CONNECTED ) == 0 ) { //even values are disconnected etc. +// ifbp->IFB_TickCnt = 0; //start 2 second period (with 1 tick uncertanty) +// printk( "<5>isr_info: AwaitConnection phase started, IFB_TickCnt = 0\n" ); //;?remove me 1 day +// } // #endif // HCF_DDS -// } +// } // #if (HCF_EXT) & HCF_EXT_INFO_LOG -// /*6*/ while ( 1 ) { -// if ( ridp->typ == 0 || ridp->typ == info[1] ) { -// if ( ridp->bufp ) { -// HCFASSERT( ridp->len >= 2, ridp->typ ); -// (void)setup_bap( ifbp, fid, 2, IO_IN ); //restore BAP for tallies, linkstat and specific type followed by wild card -// ridp->bufp[0] = min( ridp->len - 1, info[0] ); //save L -// get_frag( ifbp, (wci_bufp)&ridp->bufp[1], ridp->bufp[0]*2 BE_PAR(0) ); -// } -// break; //;?this break is no longer needed due to setup_bap but lets concentrate on DDS first -// } -// ridp++; -// } +// /*6*/ while ( 1 ) { +// if ( ridp->typ == 0 || ridp->typ == info[1] ) { +// if ( ridp->bufp ) { +// HCFASSERT( ridp->len >= 2, ridp->typ ); +// (void)setup_bap( ifbp, fid, 2, IO_IN ); //restore BAP for tallies, linkstat and specific type followed by wild card +// ridp->bufp[0] = min( ridp->len - 1, info[0] ); //save L +// get_frag( ifbp, (wci_bufp)&ridp->bufp[1], ridp->bufp[0]*2 BE_PAR(0) ); +// } +// break; //;?this break is no longer needed due to setup_bap but lets concentrate on DDS first +// } +// ridp++; +// } // #endif // HCF_EXT_INFO_LOG -// } -// HCFTRACE( ifbp, HCF_TRACE_ISR_INFO | HCF_TRACE_EXIT ); +// } +// HCFTRACE( ifbp, HCF_TRACE_ISR_INFO | HCF_TRACE_EXIT ); // // // // -// return; +// return; //} // isr_info //#endif // HCF_DL_ONLY /************************************************************************************************************ -* -*.SUBMODULE void mdd_assert( IFBP ifbp, unsigned int line_number, hcf_32 q ) -*.PURPOSE filters assert on level and interfaces to the MSF supplied msf_assert routine. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* line_number line number of the line which caused the assert -* q qualifier, additional information which may give a clue about the problem -* -*.RETURNS N.A. -* -*.DESCRIPTION -* -* -*.DIAGRAM -* -*.NOTICE -* mdd_assert has been through a turmoil, renaming hcf_assert to assert and hcf_assert again and supporting off -* and on being called from the MSF level and other ( immature ) ModularDriverDevelopment modules like DHF and -* MMD. + * + *.SUBMODULE void mdd_assert( IFBP ifbp, unsigned int line_number, hcf_32 q ) + *.PURPOSE filters assert on level and interfaces to the MSF supplied msf_assert routine. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * line_number line number of the line which caused the assert + * q qualifier, additional information which may give a clue about the problem + * + *.RETURNS N.A. + * + *.DESCRIPTION + * + * + *.DIAGRAM + * + *.NOTICE + * mdd_assert has been through a turmoil, renaming hcf_assert to assert and hcf_assert again and supporting off + * and on being called from the MSF level and other ( immature ) ModularDriverDevelopment modules like DHF and + * MMD. * !!!! The assert routine is not an hcf_..... routine in the sense that it may be called by the MSF, - * however it is called from mmd.c and dhf.c, so it must be external. - * To prevent namespace pollution it needs a prefix, to prevent that MSF programmers think that - * they are allowed to call the assert logic, the prefix HCF can't be used, so MDD is selected!!!! + * however it is called from mmd.c and dhf.c, so it must be external. + * To prevent namespace pollution it needs a prefix, to prevent that MSF programmers think that + * they are allowed to call the assert logic, the prefix HCF can't be used, so MDD is selected!!!! * -* When called from the DHF module the line number is incremented by DHF_FILE_NAME_OFFSET and when called from -* the MMD module by MMD_FILE_NAME_OFFSET. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * When called from the DHF module the line number is incremented by DHF_FILE_NAME_OFFSET and when called from + * the MMD module by MMD_FILE_NAME_OFFSET. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ #if HCF_ASSERT void mdd_assert( IFBP ifbp, unsigned int line_number, hcf_32 q ) { -hcf_16 run_time_flag = ifbp->IFB_AssertLvl; + hcf_16 run_time_flag = ifbp->IFB_AssertLvl; if ( run_time_flag /* > ;?????? */ ) { //prevent recursive behavior, later to be extended to level filtering ifbp->IFB_AssertQualifier = q; @@ -4441,9 +4441,9 @@ hcf_16 run_time_flag = ifbp->IFB_AssertLvl; #endif // HCF_ASSERT_SW_SUP #if (HCF_EXT) & HCF_EXT_MB && (HCF_ASSERT) & HCF_ASSERT_MB - ifbp->IFB_AssertLvl = 0; // prevent recursive behavior + ifbp->IFB_AssertLvl = 0; // prevent recursive behavior hcf_put_info( ifbp, (LTVP)&ifbp->IFB_AssertStrct ); - ifbp->IFB_AssertLvl = run_time_flag; // restore appropriate filter level + ifbp->IFB_AssertLvl = run_time_flag; // restore appropriate filter level #endif // HCF_EXT_MB / HCF_ASSERT_MB } } // mdd_assert @@ -4451,63 +4451,63 @@ hcf_16 run_time_flag = ifbp->IFB_AssertLvl; /************************************************************************************************************ -* -*.SUBMODULE void put_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) -*.PURPOSE writes with 16/32 bit I/O via BAP1 port from Host memory to NIC RAM. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* bufp (byte) address of buffer -* len length in bytes of buffer specified by bufp -* word_len Big Endian only: number of leading bytes to swap in pairs -* -*.RETURNS N.A. -* -*.DESCRIPTION -* process the single byte (if applicable) not yet written by the previous put_frag and copy len -* (or len-1) bytes from bufp to NIC. -* -* -*.DIAGRAM -* -*.NOTICE -* It turns out DOS ODI uses zero length fragments. The HCF code can cope with it, but as a consequence, no -* Assert on len is possible -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void put_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) + *.PURPOSE writes with 16/32 bit I/O via BAP1 port from Host memory to NIC RAM. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * bufp (byte) address of buffer + * len length in bytes of buffer specified by bufp + * word_len Big Endian only: number of leading bytes to swap in pairs + * + *.RETURNS N.A. + * + *.DESCRIPTION + * process the single byte (if applicable) not yet written by the previous put_frag and copy len + * (or len-1) bytes from bufp to NIC. + * + * + *.DIAGRAM + * + *.NOTICE + * It turns out DOS ODI uses zero length fragments. The HCF code can cope with it, but as a consequence, no + * Assert on len is possible + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC void put_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) ) { -hcf_io io_port = ifbp->IFB_IOBase + HREG_DATA_1; //BAP data register -int i; //prevent side effects from macro -hcf_16 j; + hcf_io io_port = ifbp->IFB_IOBase + HREG_DATA_1; //BAP data register + int i; //prevent side effects from macro + hcf_16 j; HCFASSERT( ((hcf_32)bufp & (HCF_ALIGN-1) ) == 0, (hcf_32)bufp ); #if HCF_BIG_ENDIAN HCFASSERT( word_len == 0 || word_len == 2 || word_len == 4, word_len ); HCFASSERT( word_len == 0 || ((hcf_32)bufp & 1 ) == 0, (hcf_32)bufp ); HCFASSERT( word_len <= len, MERGE_2( word_len, len ) ); - if ( word_len ) { //if there is anything to convert - //. convert and write the 1st hcf_16 + if ( word_len ) { //if there is anything to convert + //. convert and write the 1st hcf_16 j = bufp[1] | bufp[0]<<8; OUT_PORT_WORD( io_port, j ); - //. update pointer and counter accordingly + //. update pointer and counter accordingly len -= 2; bufp += 2; - if ( word_len > 1 ) { //. if there is to convert more than 1 word ( i.e 2 ) - //. . convert and write the 2nd hcf_16 - j = bufp[1] | bufp[0]<<8; /*bufp is already incremented by 2*/ + if ( word_len > 1 ) { //. if there is to convert more than 1 word ( i.e 2 ) + //. . convert and write the 2nd hcf_16 + j = bufp[1] | bufp[0]<<8; /*bufp is already incremented by 2*/ OUT_PORT_WORD( io_port, j ); - //. . update pointer and counter accordingly + //. . update pointer and counter accordingly len -= 2; bufp += 2; } } #endif // HCF_BIG_ENDIAN i = len; - if ( i && ifbp->IFB_CarryOut ) { //skip zero-length + if ( i && ifbp->IFB_CarryOut ) { //skip zero-length j = ((*bufp)<<8) + ( ifbp->IFB_CarryOut & 0xFF ); OUT_PORT_WORD( io_port, j ); bufp++; i--; @@ -4515,35 +4515,35 @@ hcf_16 j; } #if (HCF_IO) & HCF_IO_32BITS //skip zero-length I/O, single byte I/O and I/O not worthwhile (i.e. less than 6 bytes)for DW logic - //if buffer length >= 6 and 32 bits I/O support + //if buffer length >= 6 and 32 bits I/O support if ( !(ifbp->IFB_CntlOpt & USE_16BIT) && i >= 6 ) { -hcf_32 FAR *p4; //prevent side effects from macro - if ( ( (hcf_32)bufp & 0x1 ) == 0 ) { //. if buffer at least word aligned - if ( (hcf_32)bufp & 0x2 ) { //. . if buffer not double word aligned - //. . . write a single word to get double word aligned - j = *(wci_recordp)bufp; //just to help ease writing macros with embedded assembly + hcf_32 FAR *p4; //prevent side effects from macro + if ( ( (hcf_32)bufp & 0x1 ) == 0 ) { //. if buffer at least word aligned + if ( (hcf_32)bufp & 0x2 ) { //. . if buffer not double word aligned + //. . . write a single word to get double word aligned + j = *(wci_recordp)bufp; //just to help ease writing macros with embedded assembly OUT_PORT_WORD( io_port, j ); - //. . . adjust buffer length and pointer accordingly + //. . . adjust buffer length and pointer accordingly bufp += 2; i -= 2; } - //. . write as many double word as possible + //. . write as many double word as possible p4 = (hcf_32 FAR *)bufp; j = (hcf_16)i/4; OUT_PORT_STRING_32( io_port, p4, j ); - //. . adjust buffer length and pointer accordingly + //. . adjust buffer length and pointer accordingly bufp += i & ~0x0003; i &= 0x0003; } } #endif // HCF_IO_32BITS - //if no 32-bit support OR byte aligned OR 1 word left + //if no 32-bit support OR byte aligned OR 1 word left if ( i ) { - //. if odd number of bytes left + //. if odd number of bytes left if ( i & 0x0001 ) { - //. . save left over byte (before bufp is corrupted) in carry, set carry flag - ifbp->IFB_CarryOut = (hcf_16)bufp[i-1] | 0x0100; //note that i and bufp are always simultaneously modified, &bufp[i-1] is invariant + //. . save left over byte (before bufp is corrupted) in carry, set carry flag + ifbp->IFB_CarryOut = (hcf_16)bufp[i-1] | 0x0100; //note that i and bufp are always simultaneously modified, &bufp[i-1] is invariant } - //. write as many word as possible in "alignment safe" way + //. write as many word as possible in "alignment safe" way j = (hcf_16)i/2; OUT_PORT_STRING_8_16( io_port, bufp, j ); } @@ -4551,117 +4551,117 @@ hcf_32 FAR *p4; //prevent side effects from macro /************************************************************************************************************ -* -*.SUBMODULE void put_frag_finalize( IFBP ifbp ) -*.PURPOSE cleanup after put_frag for trailing odd byte and MIC transfer to NIC. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* -*.RETURNS N.A. -* -*.DESCRIPTION -* finalize the MIC calculation with the padding pattern, output the last byte (if applicable) -* of the message and the MIC to the TxFS -* -* -*.DIAGRAM -*2: 1 byte of the last put_frag may be still in IFB_CarryOut ( the put_frag carry holder ), so ........ -* 1 - 3 bytes of the last put_frag may be still in IFB_tx_32 ( the MIC engine carry holder ), so ........ -* The call to the MIC calculation routine feeds these remaining bytes (if any) of put_frag and the -* just as many bytes of the padding as needed to the MIC calculation engine. Note that the "unneeded" pad -* bytes simply end up in the MIC engine carry holder and are never used. -*8: write the remainder of the MIC and possible some garbage to NIC RAM -* Note: i is always 4 (a loop-invariant of the while in point 2) -* -*.NOTICE -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE void put_frag_finalize( IFBP ifbp ) + *.PURPOSE cleanup after put_frag for trailing odd byte and MIC transfer to NIC. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * + *.RETURNS N.A. + * + *.DESCRIPTION + * finalize the MIC calculation with the padding pattern, output the last byte (if applicable) + * of the message and the MIC to the TxFS + * + * + *.DIAGRAM + *2: 1 byte of the last put_frag may be still in IFB_CarryOut ( the put_frag carry holder ), so ........ + * 1 - 3 bytes of the last put_frag may be still in IFB_tx_32 ( the MIC engine carry holder ), so ........ + * The call to the MIC calculation routine feeds these remaining bytes (if any) of put_frag and the + * just as many bytes of the padding as needed to the MIC calculation engine. Note that the "unneeded" pad + * bytes simply end up in the MIC engine carry holder and are never used. + *8: write the remainder of the MIC and possible some garbage to NIC RAM + * Note: i is always 4 (a loop-invariant of the while in point 2) + * + *.NOTICE + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC void put_frag_finalize( IFBP ifbp ) { #if (HCF_TYPE) & HCF_TYPE_WPA - if ( ifbp->IFB_MICTxCarry != 0xFFFF) { //if MIC calculation active - CALC_TX_MIC( mic_pad, 8); //. feed (up to 8 bytes of) virtual padding to MIC engine - //. write (possibly) trailing byte + (most of) MIC + if ( ifbp->IFB_MICTxCarry != 0xFFFF) { //if MIC calculation active + CALC_TX_MIC( mic_pad, 8); //. feed (up to 8 bytes of) virtual padding to MIC engine + //. write (possibly) trailing byte + (most of) MIC put_frag( ifbp, (wci_bufp)ifbp->IFB_MICTx, 8 BE_PAR(0) ); } #endif // HCF_TYPE_WPA - put_frag( ifbp, null_addr, 1 BE_PAR(0) ); //write (possibly) trailing data or MIC byte + put_frag( ifbp, null_addr, 1 BE_PAR(0) ); //write (possibly) trailing data or MIC byte } // put_frag_finalize /************************************************************************************************************ -* -*.SUBMODULE int put_info( IFBP ifbp, LTVP ltvp ) -*.PURPOSE support routine to handle the "basic" task of hcf_put_info to pass RIDs to the NIC. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* ltvp address in NIC RAM where LVT-records are located -* -*.RETURNS -* HCF_SUCCESS -* >>put_frag -* >>cmd_wait -* -*.DESCRIPTION -* -* -*.DIAGRAM -*20: do not write RIDs to NICs which have incompatible Firmware -*24: If the RID does not exist, the L-field is set to zero. -* Note that some RIDs can not be read, e.g. the pseudo RIDs for direct Hermes commands and CFG_DEFAULT_KEYS -*28: If the RID is written successful, pass it to the NIC by means of an Access Write command -* -*.NOTICE -* The mechanism to HCF_ASSERT on invalid typ-codes in the LTV record is based on the following strategy: -* - some codes (e.g. CFG_REG_MB) are explicitly handled by the HCF which implies that these codes -* are valid. These codes are already consumed by hcf_put_info. -* - all other codes are passed to the Hermes. Before the put action is executed, hcf_get_info is called -* with an LTV record with a value of 1 in the L-field and the intended put action type in the Typ-code -* field. If the put action type is valid, it is also valid as a get action type code - except -* for CFG_DEFAULT_KEYS and CFG_ADD_TKIP_DEFAULT_KEY - so the HCF_ASSERT logic of hcf_get_info should -* not catch. -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int put_info( IFBP ifbp, LTVP ltvp ) + *.PURPOSE support routine to handle the "basic" task of hcf_put_info to pass RIDs to the NIC. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * ltvp address in NIC RAM where LVT-records are located + * + *.RETURNS + * HCF_SUCCESS + * >>put_frag + * >>cmd_wait + * + *.DESCRIPTION + * + * + *.DIAGRAM + *20: do not write RIDs to NICs which have incompatible Firmware + *24: If the RID does not exist, the L-field is set to zero. + * Note that some RIDs can not be read, e.g. the pseudo RIDs for direct Hermes commands and CFG_DEFAULT_KEYS + *28: If the RID is written successful, pass it to the NIC by means of an Access Write command + * + *.NOTICE + * The mechanism to HCF_ASSERT on invalid typ-codes in the LTV record is based on the following strategy: + * - some codes (e.g. CFG_REG_MB) are explicitly handled by the HCF which implies that these codes + * are valid. These codes are already consumed by hcf_put_info. + * - all other codes are passed to the Hermes. Before the put action is executed, hcf_get_info is called + * with an LTV record with a value of 1 in the L-field and the intended put action type in the Typ-code + * field. If the put action type is valid, it is also valid as a get action type code - except + * for CFG_DEFAULT_KEYS and CFG_ADD_TKIP_DEFAULT_KEY - so the HCF_ASSERT logic of hcf_get_info should + * not catch. + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int -put_info( IFBP ifbp, LTVP ltvp ) +put_info( IFBP ifbp, LTVP ltvp ) { -int rc = HCF_SUCCESS; + int rc = HCF_SUCCESS; HCFASSERT( ifbp->IFB_CardStat == 0, MERGE_2( ltvp->typ, ifbp->IFB_CardStat ) ); HCFASSERT( CFG_RID_CFG_MIN <= ltvp->typ && ltvp->typ <= CFG_RID_CFG_MAX, ltvp->typ ); - if ( ifbp->IFB_CardStat == 0 && /* 20*/ - ( ( CFG_RID_CFG_MIN <= ltvp->typ && ltvp->typ <= CFG_RID_CFG_MAX ) || - ( CFG_RID_ENG_MIN <= ltvp->typ /* && ltvp->typ <= 0xFFFF */ ) ) ) { + if ( ifbp->IFB_CardStat == 0 && /* 20*/ + ( ( CFG_RID_CFG_MIN <= ltvp->typ && ltvp->typ <= CFG_RID_CFG_MAX ) || + ( CFG_RID_ENG_MIN <= ltvp->typ /* && ltvp->typ <= 0xFFFF */ ) ) ) { #if HCF_ASSERT //FCC8, FCB0, FCB4, FCB6, FCB7, FCB8, FCC0, FCC4, FCBC, FCBD, FCBE, FCBF - { - hcf_16 t = ltvp->typ; - LTV_STRCT x = { 2, t, {0} }; /*24*/ - hcf_get_info( ifbp, (LTVP)&x ); - if ( x.len == 0 && - ( t != CFG_DEFAULT_KEYS && t != CFG_ADD_TKIP_DEFAULT_KEY && t != CFG_REMOVE_TKIP_DEFAULT_KEY && - t != CFG_ADD_TKIP_MAPPED_KEY && t != CFG_REMOVE_TKIP_MAPPED_KEY && - t != CFG_HANDOVER_ADDR && t != CFG_DISASSOCIATE_ADDR && - t != CFG_FCBC && t != CFG_FCBD && t != CFG_FCBE && t != CFG_FCBF && - t != CFG_DEAUTHENTICATE_ADDR - ) - ) { - HCFASSERT( DO_ASSERT, ltvp->typ ); + { + hcf_16 t = ltvp->typ; + LTV_STRCT x = { 2, t, {0} }; /*24*/ + hcf_get_info( ifbp, (LTVP)&x ); + if ( x.len == 0 && + ( t != CFG_DEFAULT_KEYS && t != CFG_ADD_TKIP_DEFAULT_KEY && t != CFG_REMOVE_TKIP_DEFAULT_KEY && + t != CFG_ADD_TKIP_MAPPED_KEY && t != CFG_REMOVE_TKIP_MAPPED_KEY && + t != CFG_HANDOVER_ADDR && t != CFG_DISASSOCIATE_ADDR && + t != CFG_FCBC && t != CFG_FCBD && t != CFG_FCBE && t != CFG_FCBF && + t != CFG_DEAUTHENTICATE_ADDR + ) + ) { + HCFASSERT( DO_ASSERT, ltvp->typ ); + } } - } #endif // HCF_ASSERT rc = setup_bap( ifbp, ltvp->typ, 0, IO_OUT ); put_frag( ifbp, (wci_bufp)ltvp, 2*ltvp->len + 2 BE_PAR(2) ); -/*28*/ if ( rc == HCF_SUCCESS ) { + /*28*/ if ( rc == HCF_SUCCESS ) { rc = cmd_exe( ifbp, HCMD_ACCESS + HCMD_ACCESS_WRITE, ltvp->typ ); } } @@ -4671,113 +4671,113 @@ int rc = HCF_SUCCESS; #if (HCF_DL_ONLY) == 0 /************************************************************************************************************ -* -*.SUBMODULE int put_info_mb( IFBP ifbp, CFG_MB_INFO_STRCT FAR * ltvp ) -*.PURPOSE accumulates a ( series of) buffers into a single Info block into the MailBox. -* -*.ARGUMENTS -* ifbp address of the Interface Block -* ltvp address of structure specifying the "type" and the fragments of the information to be synthesized -* as an LTV into the MailBox -* -*.RETURNS -* -*.DESCRIPTION -* If the data does not fit (including no MailBox is available), the IFB_MBTally is incremented and an -* error status is returned. -* HCF_ASSERT does not catch. -* Calling put_info_mb when their is no MailBox available, is considered a design error in the MSF. -* -* Note that there is always at least 1 word of unused space in the mail box. -* As a consequence: -* - no problem in pointer arithmetic (MB_RP == MB_WP means unambiguously mail box is completely empty -* - There is always free space to write an L field with a value of zero after each MB_Info block. This -* allows for an easy scan mechanism in the "get MB_Info block" logic. -* -* -*.DIAGRAM -*1: Calculate L field of the MBIB, i.e. 1 for the T-field + the cumulative length of the fragments. -*2: The free space in the MailBox is calculated (2a: free part from Write Ptr to Read Ptr, 2b: free part -* turns out to wrap around) . If this space suffices to store the number of words reflected by len (T-field -* + Value-field) plus the additional MailBox Info L-field + a trailing 0 to act as the L-field of a trailing -* dummy or empty LTV record, then a MailBox Info block is build in the MailBox consisting of -* - the value len in the first word -* - type in the second word -* - a copy of the contents of the fragments in the second and higher word -* -*4: Since put_info_mb() can more or less directly be called from the MSF level, the I/F must be robust -* against out-of-range variables. As failsafe coding, the MB update is skipped by changing tlen to 0 if -* len == 0; This will indirectly cause an assert as result of the violation of the next if clause. -*6: Check whether the free space in MailBox suffices (this covers the complete absence of the MailBox). -* Note that len is unsigned, so even MSF I/F violation works out O.K. -* The '2' in the expression "len+2" is used because 1 word is needed for L itself and 1 word is needed -* for the zero-sentinel -*8: update MailBox Info length report to MSF with "oldest" MB Info Block size. Be careful here, if you get -* here before the MailBox is registered, you can't read from the buffer addressed by IFB_MBp (it is the -* Null buffer) so don't move this code till the end of this routine but keep it where there is garuanteed -* a buffer. -* -*.NOTICE -* boundary testing depends on the fact that IFB_MBSize is guaranteed to be zero if no MailBox is present, -* and to a lesser degree, that IFB_MBWp = IFB_MBRp = 0 -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int put_info_mb( IFBP ifbp, CFG_MB_INFO_STRCT FAR * ltvp ) + *.PURPOSE accumulates a ( series of) buffers into a single Info block into the MailBox. + * + *.ARGUMENTS + * ifbp address of the Interface Block + * ltvp address of structure specifying the "type" and the fragments of the information to be synthesized + * as an LTV into the MailBox + * + *.RETURNS + * + *.DESCRIPTION + * If the data does not fit (including no MailBox is available), the IFB_MBTally is incremented and an + * error status is returned. + * HCF_ASSERT does not catch. + * Calling put_info_mb when their is no MailBox available, is considered a design error in the MSF. + * + * Note that there is always at least 1 word of unused space in the mail box. + * As a consequence: + * - no problem in pointer arithmetic (MB_RP == MB_WP means unambiguously mail box is completely empty + * - There is always free space to write an L field with a value of zero after each MB_Info block. This + * allows for an easy scan mechanism in the "get MB_Info block" logic. + * + * + *.DIAGRAM + *1: Calculate L field of the MBIB, i.e. 1 for the T-field + the cumulative length of the fragments. + *2: The free space in the MailBox is calculated (2a: free part from Write Ptr to Read Ptr, 2b: free part + * turns out to wrap around) . If this space suffices to store the number of words reflected by len (T-field + * + Value-field) plus the additional MailBox Info L-field + a trailing 0 to act as the L-field of a trailing + * dummy or empty LTV record, then a MailBox Info block is build in the MailBox consisting of + * - the value len in the first word + * - type in the second word + * - a copy of the contents of the fragments in the second and higher word + * + *4: Since put_info_mb() can more or less directly be called from the MSF level, the I/F must be robust + * against out-of-range variables. As failsafe coding, the MB update is skipped by changing tlen to 0 if + * len == 0; This will indirectly cause an assert as result of the violation of the next if clause. + *6: Check whether the free space in MailBox suffices (this covers the complete absence of the MailBox). + * Note that len is unsigned, so even MSF I/F violation works out O.K. + * The '2' in the expression "len+2" is used because 1 word is needed for L itself and 1 word is needed + * for the zero-sentinel + *8: update MailBox Info length report to MSF with "oldest" MB Info Block size. Be careful here, if you get + * here before the MailBox is registered, you can't read from the buffer addressed by IFB_MBp (it is the + * Null buffer) so don't move this code till the end of this routine but keep it where there is garuanteed + * a buffer. + * + *.NOTICE + * boundary testing depends on the fact that IFB_MBSize is guaranteed to be zero if no MailBox is present, + * and to a lesser degree, that IFB_MBWp = IFB_MBRp = 0 + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ #if (HCF_EXT) & HCF_EXT_MB HCF_STATIC int put_info_mb( IFBP ifbp, CFG_MB_INFO_STRCT FAR * ltvp ) { -int rc = HCF_SUCCESS; -hcf_16 i; //work counter -hcf_16 *dp; //destination pointer (in MailBox) -wci_recordp sp; //source pointer -hcf_16 len; //total length to copy to MailBox -hcf_16 tlen; //free length/working length/offset in WMP frame + int rc = HCF_SUCCESS; + hcf_16 i; //work counter + hcf_16 *dp; //destination pointer (in MailBox) + wci_recordp sp; //source pointer + hcf_16 len; //total length to copy to MailBox + hcf_16 tlen; //free length/working length/offset in WMP frame if ( ifbp->IFB_MBp == NULL ) return rc; //;?not sufficient - HCFASSERT( ifbp->IFB_MBp != NULL, 0 ); //!!!be careful, don't get into an endless recursion + HCFASSERT( ifbp->IFB_MBp != NULL, 0 ); //!!!be careful, don't get into an endless recursion HCFASSERT( ifbp->IFB_MBSize, 0 ); - len = 1; /* 1 */ + len = 1; /* 1 */ for ( i = 0; i < ltvp->frag_cnt; i++ ) { len += ltvp->frag_buf[i].frag_len; } if ( ifbp->IFB_MBRp > ifbp->IFB_MBWp ) { - tlen = ifbp->IFB_MBRp - ifbp->IFB_MBWp; /* 2a*/ + tlen = ifbp->IFB_MBRp - ifbp->IFB_MBWp; /* 2a*/ } else { if ( ifbp->IFB_MBRp == ifbp->IFB_MBWp ) { - ifbp->IFB_MBRp = ifbp->IFB_MBWp = 0; // optimize Wrapping + ifbp->IFB_MBRp = ifbp->IFB_MBWp = 0; // optimize Wrapping } - tlen = ifbp->IFB_MBSize - ifbp->IFB_MBWp; /* 2b*/ - if ( ( tlen <= len + 2 ) && ( len + 2 < ifbp->IFB_MBRp ) ) { //if trailing space is too small but - // leading space is sufficiently large - ifbp->IFB_MBp[ifbp->IFB_MBWp] = 0xFFFF; //flag dummy LTV to fill the trailing space - ifbp->IFB_MBWp = 0; //reset WritePointer to begin of MailBox - tlen = ifbp->IFB_MBRp; //get new available space size + tlen = ifbp->IFB_MBSize - ifbp->IFB_MBWp; /* 2b*/ + if ( ( tlen <= len + 2 ) && ( len + 2 < ifbp->IFB_MBRp ) ) { //if trailing space is too small but + // leading space is sufficiently large + ifbp->IFB_MBp[ifbp->IFB_MBWp] = 0xFFFF; //flag dummy LTV to fill the trailing space + ifbp->IFB_MBWp = 0; //reset WritePointer to begin of MailBox + tlen = ifbp->IFB_MBRp; //get new available space size } } dp = &ifbp->IFB_MBp[ifbp->IFB_MBWp]; if ( len == 0 ) { tlen = 0; //;? what is this good for } - if ( len + 2 >= tlen ){ /* 6 */ + if ( len + 2 >= tlen ){ /* 6 */ //Do Not ASSERT, this is a normal condition IF_TALLY( ifbp->IFB_HCF_Tallies.NoBufMB++ ); rc = HCF_ERR_LEN; } else { - *dp++ = len; //write Len (= size of T+V in words to MB_Info block - *dp++ = ltvp->base_typ; //write Type to MB_Info block - ifbp->IFB_MBWp += len + 1; //update WritePointer of MailBox - for ( i = 0; i < ltvp->frag_cnt; i++ ) { // process each of the fragments + *dp++ = len; //write Len (= size of T+V in words to MB_Info block + *dp++ = ltvp->base_typ; //write Type to MB_Info block + ifbp->IFB_MBWp += len + 1; //update WritePointer of MailBox + for ( i = 0; i < ltvp->frag_cnt; i++ ) { // process each of the fragments sp = ltvp->frag_buf[i].frag_addr; len = ltvp->frag_buf[i].frag_len; while ( len-- ) *dp++ = *sp++; } - ifbp->IFB_MBp[ifbp->IFB_MBWp] = 0; //to assure get_info for CFG_MB_INFO stops - ifbp->IFB_MBInfoLen = ifbp->IFB_MBp[ifbp->IFB_MBRp]; /* 8 */ + ifbp->IFB_MBp[ifbp->IFB_MBWp] = 0; //to assure get_info for CFG_MB_INFO stops + ifbp->IFB_MBInfoLen = ifbp->IFB_MBp[ifbp->IFB_MBRp]; /* 8 */ } return rc; } // put_info_mb @@ -4787,94 +4787,94 @@ hcf_16 tlen; //free length/working length/offset in WMP frame /************************************************************************************************************ -* -*.SUBMODULE int setup_bap( IFBP ifbp, hcf_16 fid, int offset, int type ) -*.PURPOSE set up data access to NIC RAM via BAP_1. -* -*.ARGUMENTS -* ifbp address of I/F Block -* fid FID/RID -* offset !!even!! offset in FID/RID -* type IO_IN, IO_OUT -* -*.RETURNS -* HCF_SUCCESS O.K -* HCF_ERR_NO_NIC card is removed -* HCF_ERR_DEFUNCT_TIME_OUT Fatal malfunction detected -* HCF_ERR_DEFUNCT_..... if and only if IFB_DefunctStat <> 0 -* -*.DESCRIPTION -* -* A non-zero return status indicates: -* - the NIC is considered nonoperational, e.g. due to a time-out of some Hermes activity in the past -* - BAP_1 could not properly be initialized -* - the card is removed before completion of the data transfer -* In all other cases, a zero is returned. -* BAP Initialization failure indicates an H/W error which is very likely to signal complete H/W failure. -* Once a BAP Initialization failure has occurred all subsequent interactions with the Hermes will return a -* "defunct" status till the Hermes is re-initialized by means of an hcf_connect. -* -* A BAP is a set of registers (Offset, Select and Data) offering read/write access to a particular FID or -* RID. This access is based on a auto-increment feature. -* There are two BAPs but these days the HCF uses only BAP_1 and leaves BAP_0 to the PCI Busmastering H/W. -* -* The BAP-mechanism is based on the Busy bit in the Offset register (see the Hermes definition). The waiting -* for Busy must occur between writing the Offset register and accessing the Data register. The -* implementation to wait for the Busy bit drop after each write to the Offset register, implies that the -* requirement that the Busy bit is low before the Select register is written, is automatically met. -* BAP-setup may be time consuming (e.g. 380 usec for large offsets occurs frequently). The wait for Busy bit -* drop is protected by a loop counter, which is initialized with IFB_TickIni, which is calibrated in init. -* -* The NIC I/F is optimized for word transfer and can only handle word transfer at a word boundary in NIC -* RAM. The intended solution for transfer of a single byte has multiple H/W flaws. There have been different -* S/W Workaround strategies. RID access is hcf_16 based by "nature", so no byte access problems. For Tx/Rx -* FID access, the byte logic became obsolete by absorbing it in the double word oriented nature of the MIC -* feature. -* -* -*.DIAGRAM -* -*2: the test on rc checks whether the HCF went into "defunct" mode ( e.g. BAP initialization or a call to -* cmd_wait did ever fail). -*4: the select register and offset register are set -* the offset register is monitored till a successful condition (no busy bit) is detected or till the -* (calibrated) protection counter expires -* If the counter expires, this is reflected in IFB_DefunctStat, so all subsequent calls to setup_bap fail -* immediately ( see 2) -*6: initialization of the carry as used by pet/get_frag -*8: HREG_OFFSET_ERR is ignored as error because: -* a: the Hermes is robust against it -* b: it is not known what causes it (probably a bug), hence no strategy can be specified which level is -* to handle this error in which way. In the past, it could be induced by the MSF level, e.g. by calling -* hcf_rcv_msg while there was no Rx-FID available. Since this is an MSF-error which is caught by ASSERT, -* there is no run-time action required by the HCF. -* Lumping the Offset error in with the Busy bit error, as has been done in the past turns out to be a -* disaster or a life saver, just depending on what the cause of the error is. Since no prediction can be -* done about the future, it is "felt" to be the best strategy to ignore this error. One day the code was -* accompanied by the following comment: -* // ignore HREG_OFFSET_ERR, someone, supposedly the MSF programmer ;) made a bug. Since we don't know -* // what is going on, we might as well go on - under management pressure - by ignoring it -* -*.ENDDOC END DOCUMENTATION -* -************************************************************************************************************/ + * + *.SUBMODULE int setup_bap( IFBP ifbp, hcf_16 fid, int offset, int type ) + *.PURPOSE set up data access to NIC RAM via BAP_1. + * + *.ARGUMENTS + * ifbp address of I/F Block + * fid FID/RID + * offset !!even!! offset in FID/RID + * type IO_IN, IO_OUT + * + *.RETURNS + * HCF_SUCCESS O.K + * HCF_ERR_NO_NIC card is removed + * HCF_ERR_DEFUNCT_TIME_OUT Fatal malfunction detected + * HCF_ERR_DEFUNCT_..... if and only if IFB_DefunctStat <> 0 + * + *.DESCRIPTION + * + * A non-zero return status indicates: + * - the NIC is considered nonoperational, e.g. due to a time-out of some Hermes activity in the past + * - BAP_1 could not properly be initialized + * - the card is removed before completion of the data transfer + * In all other cases, a zero is returned. + * BAP Initialization failure indicates an H/W error which is very likely to signal complete H/W failure. + * Once a BAP Initialization failure has occurred all subsequent interactions with the Hermes will return a + * "defunct" status till the Hermes is re-initialized by means of an hcf_connect. + * + * A BAP is a set of registers (Offset, Select and Data) offering read/write access to a particular FID or + * RID. This access is based on a auto-increment feature. + * There are two BAPs but these days the HCF uses only BAP_1 and leaves BAP_0 to the PCI Busmastering H/W. + * + * The BAP-mechanism is based on the Busy bit in the Offset register (see the Hermes definition). The waiting + * for Busy must occur between writing the Offset register and accessing the Data register. The + * implementation to wait for the Busy bit drop after each write to the Offset register, implies that the + * requirement that the Busy bit is low before the Select register is written, is automatically met. + * BAP-setup may be time consuming (e.g. 380 usec for large offsets occurs frequently). The wait for Busy bit + * drop is protected by a loop counter, which is initialized with IFB_TickIni, which is calibrated in init. + * + * The NIC I/F is optimized for word transfer and can only handle word transfer at a word boundary in NIC + * RAM. The intended solution for transfer of a single byte has multiple H/W flaws. There have been different + * S/W Workaround strategies. RID access is hcf_16 based by "nature", so no byte access problems. For Tx/Rx + * FID access, the byte logic became obsolete by absorbing it in the double word oriented nature of the MIC + * feature. + * + * + *.DIAGRAM + * + *2: the test on rc checks whether the HCF went into "defunct" mode ( e.g. BAP initialization or a call to + * cmd_wait did ever fail). + *4: the select register and offset register are set + * the offset register is monitored till a successful condition (no busy bit) is detected or till the + * (calibrated) protection counter expires + * If the counter expires, this is reflected in IFB_DefunctStat, so all subsequent calls to setup_bap fail + * immediately ( see 2) + *6: initialization of the carry as used by pet/get_frag + *8: HREG_OFFSET_ERR is ignored as error because: + * a: the Hermes is robust against it + * b: it is not known what causes it (probably a bug), hence no strategy can be specified which level is + * to handle this error in which way. In the past, it could be induced by the MSF level, e.g. by calling + * hcf_rcv_msg while there was no Rx-FID available. Since this is an MSF-error which is caught by ASSERT, + * there is no run-time action required by the HCF. + * Lumping the Offset error in with the Busy bit error, as has been done in the past turns out to be a + * disaster or a life saver, just depending on what the cause of the error is. Since no prediction can be + * done about the future, it is "felt" to be the best strategy to ignore this error. One day the code was + * accompanied by the following comment: + * // ignore HREG_OFFSET_ERR, someone, supposedly the MSF programmer ;) made a bug. Since we don't know + * // what is going on, we might as well go on - under management pressure - by ignoring it + * + *.ENDDOC END DOCUMENTATION + * + ************************************************************************************************************/ HCF_STATIC int setup_bap( IFBP ifbp, hcf_16 fid, int offset, int type ) { -PROT_CNT_INI; -int rc; + PROT_CNT_INI; + int rc; HCFTRACE( ifbp, HCF_TRACE_STRIO ); rc = ifbp->IFB_DefunctStat; - if (rc == HCF_SUCCESS) { /*2*/ - OPW( HREG_SELECT_1, fid ); /*4*/ + if (rc == HCF_SUCCESS) { /*2*/ + OPW( HREG_SELECT_1, fid ); /*4*/ OPW( HREG_OFFSET_1, offset ); if ( type == IO_IN ) { ifbp->IFB_CarryIn = 0; } else ifbp->IFB_CarryOut = 0; HCF_WAIT_WHILE( IPW( HREG_OFFSET_1) & HCMD_BUSY ); - HCFASSERT( !( IPW( HREG_OFFSET_1) & HREG_OFFSET_ERR ), MERGE_2( fid, offset ) ); /*8*/ + HCFASSERT( !( IPW( HREG_OFFSET_1) & HREG_OFFSET_ERR ), MERGE_2( fid, offset ) ); /*8*/ if ( prot_cnt == 0 ) { HCFASSERT( DO_ASSERT, MERGE_2( fid, offset ) ); rc = ifbp->IFB_DefunctStat = HCF_ERR_DEFUNCT_TIME_OUT; -- 2.39.5