From 54a9a3af6827a934f95ee53942bc1a409e7ab9b8 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 26 May 2014 14:42:56 +0200 Subject: [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used to power the KSZ9031 PHY DVDDH input and to pull the necessary pins (including bootstrap pins) high. It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index faa3494a69d4..2694aa84e187 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -301,6 +301,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; status = "disabled"; }; -- 2.39.5