From 5521a513e5803c31b834c55220313e363ce02ccf Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 28 Jun 2009 16:19:23 +0200 Subject: [PATCH] Staging: rtl8187se: remove dead code Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/ieee80211/dot11d.c | 10 - .../rtl8187se/ieee80211/ieee80211_crypt.c | 13 - .../ieee80211/ieee80211_crypt_ccmp.c | 7 - .../ieee80211/ieee80211_crypt_tkip.c | 19 - .../rtl8187se/ieee80211/ieee80211_crypt_wep.c | 5 - .../rtl8187se/ieee80211/ieee80211_module.c | 88 --- .../rtl8187se/ieee80211/ieee80211_rx.c | 56 +- .../rtl8187se/ieee80211/ieee80211_softmac.c | 289 +--------- .../ieee80211/ieee80211_softmac_wx.c | 19 - .../rtl8187se/ieee80211/ieee80211_tx.c | 4 - .../rtl8187se/ieee80211/ieee80211_wx.c | 63 +-- drivers/staging/rtl8187se/r8180_core.c | 522 +----------------- drivers/staging/rtl8187se/r8180_dm.c | 12 - drivers/staging/rtl8187se/r8180_max2820.c | 69 --- drivers/staging/rtl8187se/r8180_rtl8225.c | 200 +------ drivers/staging/rtl8187se/r8180_rtl8225z2.c | 375 ------------- drivers/staging/rtl8187se/r8180_rtl8255.c | 33 +- drivers/staging/rtl8187se/r8180_wx.c | 29 - drivers/staging/rtl8187se/r8185b_init.c | 285 +--------- 19 files changed, 13 insertions(+), 2085 deletions(-) diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c index d8798698c804..309bb8bf287e 100644 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c @@ -222,13 +222,3 @@ int ToLegalChannel( return default_chn; } - -#if 0 -EXPORT_SYMBOL(Dot11d_Init); -EXPORT_SYMBOL(Dot11d_Reset); -EXPORT_SYMBOL(Dot11d_UpdateCountryIe); -EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm); -EXPORT_SYMBOL(DOT11D_ScanComplete); -EXPORT_SYMBOL(IsLegalChannel); -EXPORT_SYMBOL(ToLegalChannel); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c index 1749246f817c..013c3e19ae25 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c @@ -247,16 +247,3 @@ void ieee80211_crypto_deinit(void) } kfree(hcrypt); } - -#if 0 -EXPORT_SYMBOL(ieee80211_crypt_deinit_entries); -EXPORT_SYMBOL(ieee80211_crypt_deinit_handler); -EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit); - -EXPORT_SYMBOL(ieee80211_register_crypto_ops); -EXPORT_SYMBOL(ieee80211_unregister_crypto_ops); -EXPORT_SYMBOL(ieee80211_get_crypto_ops); -#endif - -//module_init(ieee80211_crypto_init); -//module_exit(ieee80211_crypto_deinit); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c index 2651811ad395..39fcabc12bef 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c @@ -472,10 +472,3 @@ void ieee80211_crypto_ccmp_exit(void) { ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp); } - -#if 0 -EXPORT_SYMBOL(ieee80211_ccmp_null); -#endif - -//module_init(ieee80211_crypto_ccmp_init); -//module_exit(ieee80211_crypto_ccmp_exit); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c index 65830759482f..369a283af9ce 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c @@ -327,17 +327,6 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) return -1; hdr = (struct ieee80211_hdr *) skb->data; -#if 0 -printk("@@ tkey\n"); -printk("%x|", ((u32*)tkey->key)[0]); -printk("%x|", ((u32*)tkey->key)[1]); -printk("%x|", ((u32*)tkey->key)[2]); -printk("%x|", ((u32*)tkey->key)[3]); -printk("%x|", ((u32*)tkey->key)[4]); -printk("%x|", ((u32*)tkey->key)[5]); -printk("%x|", ((u32*)tkey->key)[6]); -printk("%x\n", ((u32*)tkey->key)[7]); -#endif if (!tkey->tx_phase1_done) { tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2, @@ -767,11 +756,3 @@ void ieee80211_tkip_null(void) // printk("============>%s()\n", __func__); return; } - -#if 0 -EXPORT_SYMBOL(ieee80211_tkip_null); -#endif - - -//module_init(ieee80211_crypto_tkip_init); -//module_exit(ieee80211_crypto_tkip_exit); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c index f6b3e6380e20..3841ef96f110 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c @@ -298,8 +298,3 @@ void ieee80211_wep_null(void) // printk("============>%s()\n", __func__); return; } -#if 0 -EXPORT_SYMBOL(ieee80211_wep_null); -#endif -//module_init(ieee80211_crypto_wep_init); -//module_exit(ieee80211_crypto_wep_exit); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c index c2b61e648e4e..6fbe4890cb66 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c @@ -210,91 +210,3 @@ void free_ieee80211(struct net_device *dev) free_netdev(dev); } - -//#ifdef CONFIG_IEEE80211_DEBUG -#if 0 - -static int debug = 0; -u32 ieee80211_debug_level = 0; -struct proc_dir_entry *ieee80211_proc = NULL; - -static int show_debug_level(char *page, char **start, off_t offset, - int count, int *eof, void *data) -{ - return snprintf(page, count, "0x%08X\n", ieee80211_debug_level); -} - -static int store_debug_level(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - char buf[] = "0x00000000"; - unsigned long len = min(sizeof(buf) - 1, (u32)count); - char *p = (char *)buf; - unsigned long val; - - if (copy_from_user(buf, buffer, len)) - return count; - buf[len] = 0; - if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { - p++; - if (p[0] == 'x' || p[0] == 'X') - p++; - val = simple_strtoul(p, &p, 16); - } else - val = simple_strtoul(p, &p, 10); - if (p == buf) - printk(KERN_INFO DRV_NAME - ": %s is not in hex or decimal form.\n", buf); - else - ieee80211_debug_level = val; - - return strnlen(buf, count); -} - -static int __init ieee80211_init(void) -{ - struct proc_dir_entry *e; - - ieee80211_debug_level = debug; - ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net); - if (ieee80211_proc == NULL) { - IEEE80211_ERROR("Unable to create " DRV_NAME - " proc directory\n"); - return -EIO; - } - e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR, - ieee80211_proc); - if (!e) { - remove_proc_entry(DRV_NAME, proc_net); - ieee80211_proc = NULL; - return -EIO; - } - e->read_proc = show_debug_level; - e->write_proc = store_debug_level; - e->data = NULL; - - return 0; -} - -static void __exit ieee80211_exit(void) -{ - if (ieee80211_proc) { - remove_proc_entry("debug_level", ieee80211_proc); - remove_proc_entry(DRV_NAME, proc_net); - ieee80211_proc = NULL; - } -} - -#include -module_param(debug, int, 0444); -MODULE_PARM_DESC(debug, "debug output mask"); - - -module_exit(ieee80211_exit); -module_init(ieee80211_init); -#endif - -#if 0 -EXPORT_SYMBOL(alloc_ieee80211); -EXPORT_SYMBOL(free_ieee80211); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c index 5d42a424f933..c76ffb131449 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c @@ -650,22 +650,6 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, if (type == IEEE80211_FTYPE_MGMT) { - - #if 0 - if ( stype == IEEE80211_STYPE_AUTH && - fc & IEEE80211_FCTL_WEP && ieee->host_decrypt && - (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0) - { - printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " - "from " MAC_FMT "\n", dev->name, - MAC_ARG(hdr->addr2)); - /* TODO: could inform hostapd about this so that it - * could send auth failure report */ - goto rx_dropped; - } - #endif - - if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype)) goto rx_dropped; else @@ -1077,15 +1061,6 @@ static inline void ieee80211_extract_country_ie( u8 * addr2 ) { -#if 0 - u32 i = 0; - u8 * p = (u8*)info_element->data; - printk("-----------------------\n"); - printk("%s Country IE:", network->ssid); - for(i=0; ilen; i++) - printk("\t%2.2x", *(p+i)); - printk("\n-----------------------\n"); -#endif if(IS_DOT11D_ENABLE(ieee)) { if(info_element->len!= 0) @@ -1277,11 +1252,8 @@ inline int ieee80211_network_init( if(ieee->state != IEEE80211_LINKED) break; -#if 0 - network->last_dtim_sta_time[0] = stats->mac_time[0]; -#else + network->last_dtim_sta_time[0] = jiffies; -#endif network->last_dtim_sta_time[1] = stats->mac_time[1]; network->dtim_data = IEEE80211_DTIM_VALID; @@ -1425,9 +1397,7 @@ inline int ieee80211_network_init( if (ieee80211_is_empty_essid(network->ssid, network->ssid_len)) network->flags |= NETWORK_EMPTY_ESSID; -#if 0 - stats->signal = ieee80211_SignalStrengthTranslate(stats->signal); -#endif + stats->signal = ieee80211_TranslateToDbm(stats->signalstrength); //stats->noise = stats->signal - stats->noise; stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25; @@ -1581,21 +1551,7 @@ inline void ieee80211_process_probe_response( (beacon->capability & (1<<0x2)) ? '1' : '0', (beacon->capability & (1<<0x1)) ? '1' : '0', (beacon->capability & (1<<0x0)) ? '1' : '0'); -#if 0 - if(strcmp(escape_essid(beacon->info_element.data, beacon->info_element.len), "rtl_softap") == 0) - { - if(WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON) - { - u32 i = 0, len = stats->len; - u8 * p = (u8*)beacon; - printk("-----------------------\n"); - printk("rtl_softap Beacon:"); - for(i=0; idata, @@ -1781,9 +1737,3 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, break; } } - -#if 0 -EXPORT_SYMBOL(ieee80211_rx_mgt); -EXPORT_SYMBOL(ieee80211_rx); -EXPORT_SYMBOL(ieee80211_network_init); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index e96389ed7dba..02b0b4e06fe7 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -574,25 +574,6 @@ out: DOT11D_ScanComplete(ieee); } - -#if 0 -/* called both by wq with ieee->lock held */ -void ieee80211_softmac_scan(struct ieee80211_device *ieee) -{ - short watchdog = 0; - - do{ - ieee->current_network.channel = - (ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER; - if (watchdog++ > MAX_CHANNEL_NUMBER) - return; /* no good chans */ - - }while(!ieee->channel_map[ieee->current_network.channel]); - - - schedule_work(&ieee->softmac_scan_wq); -} -#endif #ifdef ENABLE_IPS void ieee80211_softmac_scan_wq(struct work_struct *work) { @@ -1172,206 +1153,10 @@ inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beaco //add rsn==0 condition for ap's mix security mode(wpa+wpa2), john2007.8.9 //choose AES encryption as default algorithm while using mixed mode -#if 0 - if(rsn_len == 0){ - - tag = skb_put(skb,wpa_len); - - if(wpa_len) { - - - //{add by david. 2006.8.31 - //fix linksys compatibility bug - //} - if(wpa_len > 24) {//22+2, mean include the capability - beacon->wpa_ie[wpa_len - 2] = 0; - } - //multicast cipher OUI - if( beacon->wpa_ie[11]==0x2 ){ //0x0050f202 is the oui of tkip - ieee->broadcast_key_type = KEY_TYPE_TKIP; - } - else if( beacon->wpa_ie[11]==0x4 ){//0x0050f204 is the oui of ccmp - ieee->broadcast_key_type = KEY_TYPE_CCMP; - } - //unicast cipher OUI - if( beacon->wpa_ie[14]==0 - && beacon->wpa_ie[15]==0x50 - && beacon->wpa_ie[16]==0xf2 - && beacon->wpa_ie[17]==0x2 ){ //0x0050f202 is the oui of tkip - ieee->pairwise_key_type = KEY_TYPE_TKIP; - } - - else if( beacon->wpa_ie[14]==0 - && beacon->wpa_ie[15]==0x50 - && beacon->wpa_ie[16]==0xf2 - && beacon->wpa_ie[17]==0x4 ){//0x0050f204 is the oui of ccmp - ieee->pairwise_key_type = KEY_TYPE_CCMP; - } - //indicate the wpa_ie content to WPA_SUPPLICANT - buff = kmalloc(IW_CUSTOM_MAX, GFP_ATOMIC); - memset(buff, 0, IW_CUSTOM_MAX); - p=buff; - p += sprintf(p, "ASSOCINFO(ReqIEs="); - for(i=0;iwpa_ie[i]); - } - p += sprintf(p, ")"); - memset(&wrqu, 0, sizeof(wrqu) ); - wrqu.data.length = p - buff; - - wireless_send_event(dev, IWEVCUSTOM, &wrqu, buff); - memcpy(tag,beacon->wpa_ie,wpa_len); - } - - } - - if(rsn_len > 22) { - - if( beacon->rsn_ie[4]==0x0 && - beacon->rsn_ie[5]==0xf && - beacon->rsn_ie[6]==0xac){ - - switch(beacon->rsn_ie[7]){ - case 0x1: - ieee->broadcast_key_type = KEY_TYPE_WEP40; - break; - case 0x2: - ieee->broadcast_key_type = KEY_TYPE_TKIP; - break; - case 0x4: - ieee->broadcast_key_type = KEY_TYPE_CCMP; - break; - case 0x5: - ieee->broadcast_key_type = KEY_TYPE_WEP104; - break; - default: - printk("fault suite type in RSN broadcast key\n"); - break; - } - } - - if( beacon->rsn_ie[10]==0x0 && - beacon->rsn_ie[11]==0xf && - beacon->rsn_ie[12]==0xac){ - if(beacon->rsn_ie[8]==1){//not mixed mode - switch(beacon->rsn_ie[13]){ - case 0x2: - ieee->pairwise_key_type = KEY_TYPE_TKIP; - break; - case 0x4: - ieee->pairwise_key_type = KEY_TYPE_CCMP; - break; - default: - printk("fault suite type in RSN pairwise key\n"); - break; - } - } - else if(beacon->rsn_ie[8]==2){//mixed mode - ieee->pairwise_key_type = KEY_TYPE_CCMP; - } - } - - - - tag = skb_put(skb,22); - memcpy(tag,(beacon->rsn_ie + info_addr),8); - tag[1] = 20; - tag += 8; - info_addr += 8; - - spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags); - for (i = 0; i < 2; i++) { - tag[0] = 1; - tag[1] = 0; - tag += 2; - suite_count = beacon->rsn_ie[info_addr] + \ - (beacon->rsn_ie[info_addr + 1] << 8); - info_addr += 2; - if(1 == suite_count) { - memcpy(tag,(beacon->rsn_ie + info_addr),4); - info_addr += 4; - } else { - // if the wpax_type_notify has been set by the application, - // just use it, otherwise just use the default one. - if(ieee->wpax_type_set) { - suit_select = ((0 == i) ? pairwise_type:authen_type)&0x0f ; - memcpy(tag,rsn_authen_cipher_suite[suit_select],4); - } else { - //default set as ccmp, or none authentication - if(i == 0) { - memcpy(tag,rsn_authen_cipher_suite[4],4); - } else { - memcpy(tag,rsn_authen_cipher_suite[2],4); - } - - } - - info_addr += (suite_count * 4); - } - tag += 4; - } - spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags); - - tag[0] = 0; - tag[1] = beacon->rsn_ie[info_addr+1]; - - } else { - tag = skb_put(skb,rsn_len); - if(rsn_len) { - - - if( beacon->rsn_ie[4]==0x0 && - beacon->rsn_ie[5]==0xf && - beacon->rsn_ie[6]==0xac){ - switch(beacon->rsn_ie[7]){ - case 0x1: - ieee->broadcast_key_type = KEY_TYPE_WEP40; - break; - case 0x2: - ieee->broadcast_key_type = KEY_TYPE_TKIP; - break; - case 0x4: - ieee->broadcast_key_type = KEY_TYPE_CCMP; - break; - case 0x5: - ieee->broadcast_key_type = KEY_TYPE_WEP104; - break; - default: - printk("fault suite type in RSN broadcast key\n"); - break; - } - } - if( beacon->rsn_ie[10]==0x0 && - beacon->rsn_ie[11]==0xf && - beacon->rsn_ie[12]==0xac){ - if(beacon->rsn_ie[8]==1){//not mixed mode - switch(beacon->rsn_ie[13]){ - case 0x2: - ieee->pairwise_key_type = KEY_TYPE_TKIP; - break; - case 0x4: - ieee->pairwise_key_type = KEY_TYPE_CCMP; - break; - default: - printk("fault suite type in RSN pairwise key\n"); - break; - } - - } - else if(beacon->rsn_ie[8]==2){//mixed mode - ieee->pairwise_key_type = KEY_TYPE_CCMP; - } - } - - beacon->rsn_ie[rsn_len - 2] = 0; - memcpy(tag,beacon->rsn_ie,rsn_len); - } - } -#else tag = skb_put(skb,ieee->wpa_ie_len); memcpy(tag,ieee->wpa_ie,ieee->wpa_ie_len); -#endif + tag = skb_put(skb,wmm_info_len); if(wmm_info_len) { ieee80211_WMM_Info(ieee, &tag); @@ -1827,12 +1612,6 @@ ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb) } printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest)); - //FIXME - #if 0 - spin_lock_irqsave(&ieee->lock,flags); - add_associate(ieee,dest); - spin_unlock_irqrestore(&ieee->lock,flags); - #endif } @@ -1850,11 +1629,8 @@ void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr) short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *time_l) { -#if 0 - int timeout = ieee->ps_timeout; -#else int timeout = 0; -#endif + u8 dtim; /*if(ieee->ps == IEEE80211_PS_DISABLED || ieee->iw_mode != IW_MODE_INFRA || @@ -1885,13 +1661,7 @@ short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *ti if((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) && (ieee->mgmt_queue_tail != ieee->mgmt_queue_head)) return 0; -#if 0 - if(time_l){ - *time_l = ieee->current_network.last_dtim_sta_time[0] - + (ieee->current_network.beacon_interval - * ieee->current_network.dtim_period) * 1000; - } -#else + if(time_l){ *time_l = ieee->current_network.last_dtim_sta_time[0] + MSECS((ieee->current_network.beacon_interval)); @@ -1899,7 +1669,6 @@ short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *ti //printk("beacon_interval:%x, dtim_period:%x, totol to Msecs:%x, HZ:%x\n", ieee->current_network.beacon_interval, ieee->current_network.dtim_period, MSECS(((ieee->current_network.beacon_interval * ieee->current_network.dtim_period))), HZ); } -#endif if(time_h){ *time_h = ieee->current_network.last_dtim_sta_time[1]; if(time_l && *time_l < ieee->current_network.last_dtim_sta_time[0]) @@ -2247,29 +2016,6 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * int i; spin_lock_irqsave(&ieee->lock,flags); - #if 0 - if(ieee->queue_stop){ - IEEE80211DMESG("EE: IEEE hard_start_xmit invoked when kernel queue should be stopped"); - netif_stop_queue(ieee->dev); - ieee->ieee_stats.swtxstop++; - //dev_kfree_skb_any(skb); - err = 1; - goto exit; - } - - ieee->stats.tx_bytes+=skb->len; - - - txb=ieee80211_skb_to_txb(ieee,skb); - - - if(txb==NULL){ - IEEE80211DMESG("WW: IEEE stack failed to provide txb"); - //dev_kfree_skb_any(skb); - err = 1; - goto exit; - } - #endif /* called with 2nd parm 0, no tx mgmt lock required */ ieee80211_sta_wakeup(ieee,0); @@ -2844,11 +2590,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee) //by amy init_mgmt_queue(ieee); -#if 0 - init_timer(&ieee->scan_timer); - ieee->scan_timer.data = (unsigned long)ieee; - ieee->scan_timer.function = ieee80211_softmac_scan_cb; -#endif + ieee->tx_pending.txb = NULL; init_timer(&ieee->associate_timer); @@ -3306,26 +3048,3 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL); } - - -#if 0 -EXPORT_SYMBOL(ieee80211_get_beacon); -EXPORT_SYMBOL(ieee80211_wake_queue); -EXPORT_SYMBOL(ieee80211_stop_queue); -EXPORT_SYMBOL(ieee80211_reset_queue); -EXPORT_SYMBOL(ieee80211_softmac_stop_protocol); -EXPORT_SYMBOL(ieee80211_softmac_start_protocol); -EXPORT_SYMBOL(ieee80211_is_shortslot); -EXPORT_SYMBOL(ieee80211_is_54g); -EXPORT_SYMBOL(ieee80211_wpa_supplicant_ioctl); -EXPORT_SYMBOL(ieee80211_ps_tx_ack); -EXPORT_SYMBOL(ieee80211_start_protocol); -EXPORT_SYMBOL(ieee80211_stop_protocol); -EXPORT_SYMBOL(notify_wx_assoc_event); -EXPORT_SYMBOL(ieee80211_stop_send_beacons); -EXPORT_SYMBOL(SendDisassociation); -EXPORT_SYMBOL(ieee80211_disassociate); -EXPORT_SYMBOL(ieee80211_start_scan); -EXPORT_SYMBOL(ieee80211_softmac_ips_scan_syncro); -EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c index 5c388d8454c9..f1d6cb452563 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c @@ -570,22 +570,3 @@ exit: return ret; } - -#if 0 -EXPORT_SYMBOL(ieee80211_wx_get_essid); -EXPORT_SYMBOL(ieee80211_wx_set_essid); -EXPORT_SYMBOL(ieee80211_wx_set_rate); -EXPORT_SYMBOL(ieee80211_wx_get_rate); -EXPORT_SYMBOL(ieee80211_wx_set_wap); -EXPORT_SYMBOL(ieee80211_wx_get_wap); -EXPORT_SYMBOL(ieee80211_wx_set_mode); -EXPORT_SYMBOL(ieee80211_wx_get_mode); -EXPORT_SYMBOL(ieee80211_wx_set_scan); -EXPORT_SYMBOL(ieee80211_wx_get_freq); -EXPORT_SYMBOL(ieee80211_wx_set_freq); -EXPORT_SYMBOL(ieee80211_wx_set_rawtx); -EXPORT_SYMBOL(ieee80211_wx_get_name); -EXPORT_SYMBOL(ieee80211_wx_set_power); -EXPORT_SYMBOL(ieee80211_wx_get_power); -EXPORT_SYMBOL(ieee80211_wlan_frequencies); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index 932ecb7b3bc2..f520652954af 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -585,7 +585,3 @@ int ieee80211_xmit(struct sk_buff *skb, return NETDEV_TX_BUSY; } - -#if 0 -EXPORT_SYMBOL(ieee80211_txb_free); -#endif diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c index 35a35a707c21..ed62146c54f2 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c @@ -174,33 +174,6 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee, if (iwe.u.data.length) start = iwe_stream_add_point(info, start, stop, &iwe, custom); -#if 0 - if (ieee->wpa_enabled && network->wpa_ie_len){ - char buf[MAX_WPA_IE_LEN * 2 + 30]; - // printk("WPA IE\n"); - u8 *p = buf; - p += sprintf(p, "wpa_ie="); - for (i = 0; i < network->wpa_ie_len; i++) { - p += sprintf(p, "%02x", network->wpa_ie[i]); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = strlen(buf); - start = iwe_stream_add_point(info, start, stop, &iwe, buf); - } - - if (ieee->wpa_enabled && network->rsn_ie_len){ - char buf[MAX_WPA_IE_LEN * 2 + 30]; - - u8 *p = buf; - p += sprintf(p, "rsn_ie="); - for (i = 0; i < network->rsn_ie_len; i++) { - p += sprintf(p, "%02x", network->rsn_ie[i]); - } - - -#else memset(&iwe, 0, sizeof(iwe)); if (network->wpa_ie_len) { // printk("wpa_ie_len:%d\n", network->wpa_ie_len); @@ -214,14 +187,6 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee, memset(&iwe, 0, sizeof(iwe)); if (network->rsn_ie_len) { // printk("=====>rsn_ie_len:\n", network->rsn_ie_len); - #if 0 - { - int i; - for (i=0; irsn_ie_len; i++); - printk("%2x ", network->rsn_ie[i]); - printk("\n"); - } - #endif char buf[MAX_WPA_IE_LEN]; memcpy(buf, network->rsn_ie, network->rsn_ie_len); iwe.cmd = IWEVGENIE; @@ -229,8 +194,6 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee, start = iwe_stream_add_point(info, start, stop, &iwe, buf); } -#endif - /* Add EXTRA: Age to display seconds since last beacon/probe response * for given network. */ iwe.cmd = IWEVCUSTOM; @@ -578,12 +541,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, sec.enabled = 1; // sec.encrypt = 1; -#if 0 - if (group_key ? !ieee->host_mc_decrypt : - !(ieee->host_encrypt || ieee->host_decrypt || - ieee->host_encrypt_msdu)) - goto skip_host_crypt; -#endif + switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; @@ -769,15 +727,6 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee, #if 1 int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { -#if 0 - printk("====>%s()\n", __func__); - { - int i; - for (i=0; iMAX_WPA_IE_LEN || (len && ie == NULL)) @@ -812,13 +761,3 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) } #endif - -#if 0 -EXPORT_SYMBOL(ieee80211_wx_set_gen_ie); -EXPORT_SYMBOL(ieee80211_wx_set_mlme); -EXPORT_SYMBOL(ieee80211_wx_set_auth); -EXPORT_SYMBOL(ieee80211_wx_set_encode_ext); -EXPORT_SYMBOL(ieee80211_wx_get_scan); -EXPORT_SYMBOL(ieee80211_wx_set_encode); -EXPORT_SYMBOL(ieee80211_wx_get_encode); -#endif diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 9cf82875d951..121a5d13b9e0 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -24,16 +24,6 @@ add RTL8185 and RTL8225 support, and to David Young also. */ -#if 0 -double __floatsidf (int i) { return i; } -unsigned int __fixunsdfsi (double d) { return d; } -double __adddf3(double a, double b) { return a+b; } -double __addsf3(float a, float b) { return a+b; } -double __subdf3(double a, double b) { return a-b; } -double __extendsfdf2(float a) {return a;} -#endif - - #undef DEBUG_TX_DESC2 #undef RX_DONT_PASS_UL #undef DEBUG_EPROM @@ -93,36 +83,6 @@ static struct pci_device_id rtl8180_pci_id_tbl[] __devinitdata = { .subdevice = PCI_ANY_ID, .driver_data = 0, }, -#if 0 - { - .vendor = PCI_VENDOR_ID_BELKIN, - .device = 0x6001, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = 1, - }, - { /* Belkin F5D6020 v3 */ - .vendor = PCI_VENDOR_ID_BELKIN, - .device = 0x6020, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = 2, - }, - { /* D-Link DWL-610 */ - .vendor = PCI_VENDOR_ID_DLINK, - .device = 0x3300, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = 3, - }, - { - .vendor = PCI_VENDOR_ID_REALTEK, - .device = 0x8185, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = 4, - }, -#endif { .vendor = 0, .device = 0, @@ -360,82 +320,6 @@ static int proc_get_stats_rx(char *page, char **start, return len; } -#if 0 -static int proc_get_stats_ieee(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - struct net_device *dev = data; - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - - int len = 0; - - len += snprintf(page + len, count - len, - "TXed association requests: %u\n" - "TXed authentication requests: %u\n" - "RXed successful association response: %u\n" - "RXed failed association response: %u\n" - "RXed successful authentication response: %u\n" - "RXed failed authentication response: %u\n" - "Association requests without response: %u\n" - "Authentication requests without response: %u\n" - "TX probe response: %u\n" - "RX probe request: %u\n" - "TX probe request: %lu\n" - "RX authentication requests: %lu\n" - "RX association requests: %lu\n" - "Reassociations: %lu\n", - priv->ieee80211->ieee_stats.tx_ass, - priv->ieee80211->ieee_stats.tx_aut, - priv->ieee80211->ieee_stats.rx_ass_ok, - priv->ieee80211->ieee_stats.rx_ass_err, - priv->ieee80211->ieee_stats.rx_aut_ok, - priv->ieee80211->ieee_stats.rx_aut_err, - priv->ieee80211->ieee_stats.ass_noresp, - priv->ieee80211->ieee_stats.aut_noresp, - priv->ieee80211->ieee_stats.tx_probe, - priv->ieee80211->ieee_stats.rx_probe, - priv->ieee80211->ieee_stats.tx_probe_rq, - priv->ieee80211->ieee_stats.rx_auth_rq, - priv->ieee80211->ieee_stats.rx_assoc_rq, - priv->ieee80211->ieee_stats.reassoc); - - *eof = 1; - return len; -} -#endif -#if 0 -static int proc_get_stats_ap(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - struct net_device *dev = data; - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - struct mac_htable_t *list; - int i; - int len = 0; - - if(priv->ieee80211->iw_mode != IW_MODE_MASTER){ - len += snprintf(page + len, count - len, - "Card is not acting as AP...\n" - ); - }else{ - len += snprintf(page + len, count - len, - "List of associated STA:\n" - ); - - for(i=0;iieee80211->assoc_htable[i]; list!=NULL; list = list->next){ - len += snprintf(page + len, count - len, - MACSTR"\n",MAC2STR(list->adr)); - } - - } - *eof = 1; - return len; -} -#endif - static int proc_get_stats_tx(char *page, char **start, off_t offset, int count, int *eof, void *data) @@ -561,26 +445,6 @@ void rtl8180_proc_init_one(struct net_device *dev) "/proc/net/r8180/%s/stats-tx\n", dev->name); } - #if 0 - e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_stats_ieee, dev); - - if (!e) { - DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-ieee\n", - dev->name); - } - #endif - #if 0 - e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_stats_ap, dev); - - if (!e) { - DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-ap\n", - dev->name); - } - #endif e = create_proc_read_entry("registers", S_IFREG | S_IRUGO, priv->dir_dev, proc_get_registers, dev); @@ -731,10 +595,6 @@ int get_curr_tx_free_desc(struct net_device *dev, int priority) /* FIXME FIXME FIXME FIXME */ -#if 0 - if( head <= tail ) return priv->txringcount-1 - (tail - head)/8; - return (head - tail)/8/4; -#else if( head <= tail ) ret = priv->txringcount - (tail - head)/8; else @@ -742,7 +602,6 @@ int get_curr_tx_free_desc(struct net_device *dev, int priority) if(ret > priv->txringcount ) DMESG("BUG"); return ret; -#endif } @@ -1540,34 +1399,6 @@ void rtl8180_rtx_disable(struct net_device *dev) dev_kfree_skb_any(priv->rx_skb); } -#if 0 -int alloc_tx_beacon_desc_ring(struct net_device *dev, int count) -{ - int i; - u32 *tmp; - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - - priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev, - sizeof(u32)*8*count, - &priv->txbeaconringdma); - if (!priv->txbeaconring) return -1; - for (tmp=priv->txbeaconring,i=0;itxbeaconringdma+((i+1)*8*4); - else - *(tmp+4) = (u32)priv->txbeaconringdma; - - tmp=tmp+8; - } - return 0; -} -#endif - short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, int addr) { @@ -1601,28 +1432,6 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, if (buf == NULL) return -ENOMEM; switch(addr) { -#if 0 - case TX_NORMPRIORITY_RING_ADDR: - if(-1 == buffer_add(&(priv->txnpbufs),buf,dma_tmp,NULL)){ - DMESGE("Unable to allocate mem for buffer NP"); - return -ENOMEM; - } - break; - - case TX_LOWPRIORITY_RING_ADDR: - if(-1 == buffer_add(&(priv->txlpbufs),buf,dma_tmp,NULL)){ - DMESGE("Unable to allocate mem for buffer LP"); - return -ENOMEM; - } - break; - - case TX_HIGHPRIORITY_RING_ADDR: - if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){ - DMESGE("Unable to allocate mem for buffer HP"); - return -ENOMEM; - } - break; -#else case TX_MANAGEPRIORITY_RING_ADDR: if(-1 == buffer_add(&(priv->txmapbufs),buf,dma_tmp,NULL)){ DMESGE("Unable to allocate mem for buffer NP"); @@ -1655,7 +1464,6 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, return -ENOMEM; } break; -#endif case TX_HIGHPRIORITY_RING_ADDR: if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){ DMESGE("Unable to allocate mem for buffer HP"); @@ -1764,22 +1572,6 @@ void free_tx_desc_rings(struct net_device *dev) buffer_free(dev,&(priv->txbeaconbufs),priv->txbuffsize,1); } -#if 0 -void free_beacon_desc_ring(struct net_device *dev,int count) -{ - - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - struct pci_dev *pdev=priv->pdev; - - pci_free_consistent(pdev, sizeof(u32)*8*count+256, - priv->txbeaconring, priv->txbeaconringdma); - - if (priv->beacon_buf) - pci_free_consistent(priv->pdev, - priv->master_beaconsize,priv->beacon_buf,priv->beacondmabuf); - -} -#endif void free_rx_desc_ring(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); @@ -2247,39 +2039,6 @@ void rtl8180_rx(struct net_device *dev) }else{*/ - #if 0 - /* Maybe it is possible that the NIC has skipped some descriptors or - * it has reset its internal pointer to the beginning of the ring - * we search for the first filled descriptor in the ring, or we break - * putting again the pointer in the old location if we do not found any. - * This is quite dangerous, what does happen if the nic writes - * two descriptor (say A and B) when we have just checked the descriptor - * A and we are going to check the descriptor B..This might happen if the - * interrupt was dummy, there was not really filled descriptors and - * the NIC didn't lose pointer - */ - - //priv->stats.rxwrkaround++; - - tmp = priv->rxringtail; - while (*(priv->rxringtail) & (1<<31)){ - - priv->rxringtail+=4; - - if(priv->rxringtail >= - (priv->rxring)+(priv->rxringcount )*4) - priv->rxringtail=priv->rxring; - - priv->rxbuffer=(priv->rxbuffer->next); - - if(priv->rxringtail == tmp ){ - //DMESG("EE: Could not find RX pointer"); - priv->stats.rxnopointer++; - break; - } - } - #else - tmp2 = NULL; tmp = priv->rxringtail; do{ @@ -2294,7 +2053,6 @@ void rtl8180_rx(struct net_device *dev) }while(tmp != priv->rxring); if(tmp2) priv->rxringtail = tmp2; - #endif //} } @@ -2529,30 +2287,6 @@ void rtl8180_rx(struct net_device *dev) /* support for prism header has been originally added by Christian */ if(priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR){ -#if 0 - priv->rx_skb = dev_alloc_skb(len+2+PRISM_HDR_SIZE); - if(! priv->rx_skb) goto drop; - - prism_hdr = (u32*) skb_put(priv->rx_skb,PRISM_HDR_SIZE); - prism_hdr[0]=htonl(0x80211001); //version - prism_hdr[1]=htonl(0x40); //length - prism_hdr[2]=htonl(stats.mac_time[1]); //mactime (HIGH) - prism_hdr[3]=htonl(stats.mac_time[0]); //mactime (LOW) - rdtsc(prism_hdr[5], prism_hdr[4]); //hostime (LOW+HIGH) - prism_hdr[4]=htonl(prism_hdr[4]); //Byte-Order aendern - prism_hdr[5]=htonl(prism_hdr[5]); //Byte-Order aendern - prism_hdr[6]=0x00; //phytype - prism_hdr[7]=htonl(priv->chan); //channel - prism_hdr[8]=htonl(stats.rate); //datarate - prism_hdr[9]=0x00; //antenna - prism_hdr[10]=0x00; //priority - prism_hdr[11]=0x00; //ssi_type - prism_hdr[12]=htonl(stats.signal); //ssi_signal - prism_hdr[13]=htonl(stats.noise); //ssi_noise - prism_hdr[14]=0x00; //preamble - prism_hdr[15]=0x00; //encoding - -#endif }else{ priv->rx_skb = dev_alloc_skb(len+2); if( !priv->rx_skb) goto drop; @@ -2737,21 +2471,6 @@ void rtl8180_dma_kick(struct net_device *dev, int priority) force_pci_posting(dev); } -#if 0 -void rtl8180_tx_queues_stop(struct net_device *dev) -{ - //struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - u8 dma_poll_mask = (1<ieee80211->basic_rate)); dev_kfree_skb_any(skb); } - #if 0 - //DMESG("size %x",len); - if(*tail & (1<<31)){ - - //DMESG("No more beacon TX desc"); - return ; - - } - //while(! (*tail & (1<<31))){ - *tail= 0; // zeroes header - - *tail = *tail| (1<<29) ; //fist segment of the packet - *tail = (*tail) | (1<<28); // last segment - // *tail = *tail | (1<<18); // this is a beacon frame - *(tail+3)=*(tail+3) &~ 0xfff; - *(tail+3)=*(tail+3) | len; // buffer lenght - *tail = *tail |len; - // zeroes the second 32-bits dword of the descriptor - *(tail+1)= 0; - *tail = *tail | (rate << 24); - - duration = rtl8180_len2duration(len,rate,&ext); - - *(tail+1) = *(tail+1) | ((duration & 0x7fff)<<16); - - *tail = *tail | (1<<31); - //^ descriptor ready to be txed - if((tail - begin)/8 == priv->txbeaconcount-1) - tail=begin; - else - tail=tail+8; - //} -#endif } /* This function do the real dirty work: it enqueues a TX command @@ -3233,21 +2919,6 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority, //DMESG("rate %d",rate); if(priv->card_8185){ - - #if 0 - *(tail+5)&= ~(1<<24); /* tx ant 0 */ - - *(tail+5) &= ~(1<<23); /* random tx agc 23-16 */ - *(tail+5) |= (1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16); - - *(tail+5) &= -~((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)); - *(tail+5) |= (7<<8); // Max retry limit - - *(tail+5) &= ~((1<<7)|(1<<6)|(1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1<<0)); - *(tail+5) |= (8<<4); // Max contention window - *(tail+6) |= 4; // Min contention window - #endif // *(tail+5) = 0; } @@ -3387,29 +3058,6 @@ void rtl8180_link_change(struct net_device *dev) u16 = u16 &~ ATIM_MASK; u16 = u16 | beacon->atim; */ -#if 0 - if (net->capability & WLAN_CAPABILITY_PRIVACY) { - if (priv->hw_wep) { - DMESG("Enabling hardware WEP support"); - rtl8180_set_hw_wep(dev); - priv->ieee80211->host_encrypt=0; - priv->ieee80211->host_decrypt=0; - } -#ifndef CONFIG_IEEE80211_NOWEP - else { - priv->ieee80211->host_encrypt=1; - priv->ieee80211->host_decrypt=1; - } -#endif - } -#ifndef CONFIG_IEEE80211_NOWEP - else{ - priv->ieee80211->host_encrypt=0; - priv->ieee80211->host_decrypt=0; - } -#endif -#endif - if(priv->card_8185) rtl8180_set_chan(dev, priv->chan); @@ -3811,13 +3459,6 @@ short rtl8180_init(struct net_device *dev) u16 tmpu16; int i, j; -#if 0 - for(i=0;i<0xFF;i++) { - if(i%16 == 0) - printk("\n[%x]: ", i/16); - printk("\t%4.4x", eprom_read(dev,i)); - } -#endif priv->channel_plan = eprom_read(dev, EEPROM_COUNTRY_CODE>>1) & 0xFF; if(priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN){ printk("rtl8180_init:Error channel plan! Set to default.\n"); @@ -3853,39 +3494,8 @@ short rtl8180_init(struct net_device *dev) priv->irq_enabled=0; //YJ,modified,080828 -#if 0 - priv->stats.rxdmafail=0; - priv->stats.txrdu=0; - priv->stats.rxrdu=0; - priv->stats.rxnolast=0; - priv->stats.rxnodata=0; - //priv->stats.rxreset=0; - //priv->stats.rxwrkaround=0; - priv->stats.rxnopointer=0; - priv->stats.txnperr=0; - priv->stats.txresumed=0; - priv->stats.rxerr=0; - priv->stats.rxoverflow=0; - priv->stats.rxint=0; - priv->stats.txnpokint=0; - priv->stats.txhpokint=0; - priv->stats.txhperr=0; - priv->stats.ints=0; - priv->stats.shints=0; - priv->stats.txoverflow=0; - priv->stats.txbeacon=0; - priv->stats.txbeaconerr=0; - priv->stats.txlperr=0; - priv->stats.txlpokint=0; - priv->stats.txretry=0;//tony 20060601 - priv->stats.rxcrcerrmin=0; - priv->stats.rxcrcerrmid=0; - priv->stats.rxcrcerrmax=0; - priv->stats.rxicverr=0; -#else rtl8180_statistics_init(&priv->stats); rtl8180_link_detect_init(&priv->link_detect); -#endif //YJ,modified,080828,end @@ -4532,24 +4142,13 @@ void rtl8185_write_phy(struct net_device *dev, u8 adr, u32 data) adr |= 0x80; phyw= ((data<<8) | adr); -#if 0 - - write_nic_dword(dev, PHY_ADR, phyw); - //read_nic_dword(dev, PHY_ADR); - for(i=0;i<10;i++){ - write_nic_dword(dev, PHY_ADR, 0xffffff7f & phyw); - phyr = read_nic_byte(dev, PHY_READ); - if(phyr == (data&0xff)) break; - - } -#else // Note that, we must write 0xff7c after 0x7d-0x7f to write BB register. write_nic_byte(dev, 0x7f, ((phyw & 0xff000000) >> 24)); write_nic_byte(dev, 0x7e, ((phyw & 0x00ff0000) >> 16)); write_nic_byte(dev, 0x7d, ((phyw & 0x0000ff00) >> 8)); write_nic_byte(dev, 0x7c, ((phyw & 0x000000ff) )); -#endif + /* this is ok to fail when we write AGC table. check for AGC table might be * done by masking with 0x7f instead of 0xff */ @@ -4806,19 +4405,7 @@ void rtl8180_start_tx_beacon(struct net_device *dev) rtl8180_prepare_beacon(dev); rtl8180_irq_disable(dev); rtl8180_beacon_tx_enable(dev); -#if 0 - rtl8180_set_mode(dev,EPROM_CMD_CONFIG); - //write_nic_byte(dev,0x9d,0x20); //DMA Poll - //write_nic_word(dev,0x7a,0); - //write_nic_word(dev,0x7a,0x8000); -#if 0 - word = read_nic_word(dev, BcnItv); - word &= ~BcnItv_BcnItv; // clear Bcn_Itv - word |= priv->ieee80211->current_network.beacon_interval;//0x64; - write_nic_word(dev, BcnItv, word); -#endif -#endif word = read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd; write_nic_word(dev, AtimWnd,word);// word |= //priv->ieee80211->current_network.atim_window); @@ -4887,16 +4474,7 @@ MgntActSet_802_11_PowerSaveMode( // priv->dot11PowerSaveMode = rtPsMode; priv->ieee80211->ps = rtPsMode; // Determine ListenInterval. -#if 0 - if(priv->dot11PowerSaveMode == eMaxPs) - { - priv->ieee80211->ListenInterval = 10; - } - else - { - priv->ieee80211->ListenInterval = 2; - } -#endif + return true; } @@ -5058,31 +4636,6 @@ void rtl8180_watch_dog(struct net_device *dev) } #endif -#if 0 -#ifndef ENABLE_LPS - if(priv->ieee80211->state == IEEE80211_LINKED){ - if( priv->NumRxOkInPeriod> 666 || - priv->NumTxOkInPeriod > 666 ) { - bBusyTraffic = true; - } - if((priv->ieee80211->NumRxData + priv->NumTxOkInPeriod)<8) { - bEnterPS= true; - } - if(bEnterPS) { - LeisurePSEnter(priv); - } - else { - LeisurePSLeave(priv); - } - } - else { - LeisurePSLeave(priv); - } -#endif - priv->NumRxOkInPeriod = 0; - priv->NumTxOkInPeriod = 0; - priv->ieee80211->NumRxData = 0; -#else #ifdef ENABLE_LPS if(priv->ieee80211->state == IEEE80211_LINKED){ priv->link_detect.NumRxOkInPeriod = priv->ieee80211->NumRxDataInPeriod; @@ -5115,7 +4668,6 @@ void rtl8180_watch_dog(struct net_device *dev) priv->link_detect.NumTxOkInPeriod = 0; priv->ieee80211->NumRxDataInPeriod = 0; priv->ieee80211->NumRxBcnInPeriod = 0; -#endif } int _rtl8180_up(struct net_device *dev) { @@ -5288,21 +4840,6 @@ static void r8180_set_multicast(struct net_device *dev) //up(&priv->wx_sem); } -#if 0 -/* this is called by the kernel when it needs to TX a 802.3 encapsulated frame*/ -int rtl8180_8023_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - int ret; - unsigned long flags; - - spin_lock_irqsave(&priv->tx_lock,flags); - ret = ieee80211_r8180_8023_hardstartxmit(skb,priv->ieee80211); - spin_unlock_irqrestore(&priv->tx_lock,flags); - return ret; -} -#endif - int r8180_set_mac_adr(struct net_device *dev, void *mac) { struct r8180_priv *priv = ieee80211_priv(dev); @@ -5766,20 +5303,7 @@ priv->txnpring)/8); else head+=8; } -#if 0 - if(nicv == begin) - txdv = begin + (priv->txringcount -1)*8; - else - txdv = nicv - 8; - txed = !(txdv[0] &(1<<31)); - - if(txed){ - if(!(txdv[0] & (1<<15))) error = 1; - //if(!(txdv[0] & (1<<30))) error = 1; - if(error)DMESG("%x",txdv[0]); - } -#endif //DMESG("%x",txdv[0]); /* the head has been moved to the last certainly TXed * (or at least processed by the nic) packet. @@ -6130,14 +5654,6 @@ void GPIOChangeRFWorkItemCallBack(struct work_struct *work) priv->PowerProfile = read_acadapter_file("/proc/acpi/ac_adapter/AC0/state"); readf_count = (readf_count+1)%0xffff; -#endif -#if 0 - if(priv->up == 0)//driver stopped - { - printk("\nDo nothing..."); - goto out; - } - else #endif { // We should turn off LED before polling FF51[4]. @@ -6193,40 +5709,6 @@ void GPIOChangeRFWorkItemCallBack(struct work_struct *work) static u8 read_acadapter_file(char *filename) { -#if 0 - int fd; - char buf[1]; - char ret[50]; - int i = 0; - int n = 0; - mm_segment_t old_fs = get_fs(); - set_fs(KERNEL_DS); - - fd = sys_open(filename, O_RDONLY, 0); - if (fd >= 0) { - while (sys_read(fd, buf, 1) == 1) - { - i++; - if(i>10) - { - if(buf[0]!=' ') - { - ret[n]=buf[0]; - n++; - } - } - } - sys_close(fd); - } - ret[n]='\0'; -// printk("%s \n", ret); - set_fs(old_fs); - - if(strncmp(ret, "off-line",8) == 0) - { - return 1; - } -#endif return 0; } diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c index 2ae606d14285..b6eeeeccff9e 100644 --- a/drivers/staging/rtl8187se/r8180_dm.c +++ b/drivers/staging/rtl8187se/r8180_dm.c @@ -1380,12 +1380,6 @@ SwitchAntenna( if(priv->CurrAntennaIndex == 0) { -#if 0//lzm del 080826 -//by amy 080312 - if(priv->bSwAntennaDiverity) - bResult = SetAntennaConfig87SE(dev, 1, true); - else -#endif bResult = SetAntenna8185(dev, 1); //by amy 080312 // printk("SwitchAntenna(): switching to antenna 1 ......\n"); @@ -1393,12 +1387,6 @@ SwitchAntenna( } else { -#if 0//lzm del 080826 -//by amy 080312 - if(priv->bSwAntennaDiverity) - bResult = SetAntennaConfig87SE(dev, 0, true); - else -#endif bResult = SetAntenna8185(dev, 0); //by amy 080312 // printk("SwitchAntenna(): switching to antenna 0 ......\n"); diff --git a/drivers/staging/rtl8187se/r8180_max2820.c b/drivers/staging/rtl8187se/r8180_max2820.c index cea08463d5ee..0f301519fc32 100644 --- a/drivers/staging/rtl8187se/r8180_max2820.c +++ b/drivers/staging/rtl8187se/r8180_max2820.c @@ -50,75 +50,6 @@ u32 maxim_chan[] = { 84, //14 }; -#if 0 -/* maxim expects 4 bit address MSF, then 12 bit data MSF*/ -void write_maxim(struct net_device *dev,u8 adr, u32 data) -{ - - int shift; - short bit; - u16 word; - - adr = adr &0xf; - word = (u16)data & 0xfff; - word |= (adr<<12); - /*write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN); - read_nic_dword(dev,PHY_CONFIG); - mdelay(1); - - write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN | BB_HOST_BANG_CLK); - read_nic_dword(dev,PHY_CONFIG); - mdelay(1); - */ - - /* MAX2820 will sample data on rising edge of clock */ - for(shift = 15;shift >=0; shift--){ - bit = word>>shift & 1; - - write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<card_8185 == 2) - write_phy_ofdm(dev, 0x21, 0x27); - else - write_phy_ofdm(dev, 0x21, 0x37); - - write_phy_ofdm(dev, 0x25, 0x20); - write_phy_ofdm(dev, 0x11, 0x6); - - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_ofdm(dev, 0x27, 0x8); - else - write_phy_ofdm(dev, 0x27, 0x88); - - write_phy_ofdm(dev, 0x14, 0); - write_phy_ofdm(dev, 0x16, 0); - write_phy_ofdm(dev, 0x15, 0x40); - write_phy_ofdm(dev, 0x17, 0x40); - - write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]); - write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]); - write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]); - write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]); - //rtl8225_set_gain_usb(dev, gain); -} -#endif - void write_rtl8225(struct net_device *dev, u8 adr, u16 data) { @@ -366,14 +285,7 @@ void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) mdelay(1); //write_nic_byte(dev, TX_AGC_CONTROL,4); } -#if 0 -/* switch between mode B and G */ -void rtl8225_set_mode(struct net_device *dev, short modeb) -{ - write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40)); - write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40)); -} -#endif + void rtl8225_rf_set_chan(struct net_device *dev, short ch) { struct r8180_priv *priv = ieee80211_priv(dev); @@ -441,33 +353,6 @@ void rtl8225_host_pci_init(struct net_device *dev) void rtl8225_host_usb_init(struct net_device *dev) { - #if 0 - write_nic_byte(dev,RFPinsSelect+1,0); - - write_nic_byte(dev,GPIO,0); - - write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7)); - - write_nic_byte(dev,RFPinsSelect+1,4); - - write_nic_byte(dev,GPIO,0x20); - - write_nic_byte(dev,GP_ENABLE,0); - - - /* Config BB & RF */ - write_nic_word(dev, RFPinsOutput, 0x80); - - write_nic_word(dev, RFPinsSelect, 0x80); - - write_nic_word(dev, RFPinsEnable, 0x80); - - - mdelay(100); - - mdelay(1000); -#endif - } void rtl8225_rf_sleep(struct net_device *dev) @@ -511,20 +396,6 @@ void rtl8225_rf_init(struct net_device *dev) write_nic_word(dev, BRSR, 0xffff); - #if 0 - if(priv->card_8185 == 1){/* version C or B */ - if(priv->card_8185_Bversion) /* version B*/ - write_nic_dword(dev, RF_PARA, 0x44); - else /* version C */ - write_nic_dword(dev, RF_PARA, 0x100044); - }else{ /* version D */ - if(priv->enable_gpio0) - write_nic_dword(dev, RF_PARA, 0x20100044); - else /* also USB */ - write_nic_dword(dev, RF_PARA, 0x100044); - } - #endif - write_nic_dword(dev, RF_PARA, 0x100044); #if 1 //0->1 @@ -555,13 +426,6 @@ void rtl8225_rf_init(struct net_device *dev) mdelay(1); - - #if 0 - }else if(priv->phy_ver == 1){ - /* version A */ - write_rtl8225(dev, 0x5, 0xbc0 + 2); - }else{ - #endif /* version B & C */ if(priv->card_type == USB) @@ -628,12 +492,6 @@ void rtl8225_rf_init(struct net_device *dev) for(i=0;i<95;i++){ write_rtl8225(dev, 0x1, (u8)(i+1)); - #if 0 - if(priv->phy_ver == 1) - /* version A */ - write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]); - else - #endif /* version B & C & D*/ write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]); @@ -681,18 +539,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0x8, 0x40); mdelay(1); write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1); - #if 0 - if(priv->card_type == USB){ - write_phy_ofdm(dev, 0xa, 0x9); - }else{ - if(priv->card_8185 == 1 && priv->card_8185_Bversion){ - /* Ver B - * maybe later version can accept this also? - */ - write_phy_ofdm(dev, 0xa, 0x6); - write_phy_ofdm(dev, 0x18, 0x6f); - }else{ - #endif /* ver C & D */ write_phy_ofdm(dev, 0xa, 0x9); mdelay(1); @@ -710,14 +556,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1); - #if 0 - if(priv->card_8185 == 1){ - if(priv->card_8185_Bversion) - write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/ - else - write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/ - }else{ - #endif write_phy_ofdm(dev, 0xf, 0x38);mdelay(1); /*ver D & 8187*/ // } @@ -738,13 +576,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0x13, 0x20);mdelay(1); -#if 0 - }else{ - /* Ver B & C*/ - write_phy_ofdm(dev, 0x12, 0x0); - write_phy_ofdm(dev, 0x13, 0x0); - } -#endif write_phy_ofdm(dev, 0x14, 0x0); mdelay(1); write_phy_ofdm(dev, 0x15, 0x40); mdelay(1); write_phy_ofdm(dev, 0x16, 0x0); mdelay(1); @@ -769,20 +600,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1); -#if 0 - if(priv->card_8185 == 1){ - if(priv->card_8185_Bversion){ - /*ver B*/ - write_phy_ofdm(dev, 0x1e, 0x95); - write_phy_ofdm(dev, 0x1f, 0x55); - }else{ - /*ver C*/ - write_phy_ofdm(dev, 0x1e, 0x90); - write_phy_ofdm(dev, 0x1f, 0x34); - - } - }else{ -#endif /*ver D & 8187*/ write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1); @@ -802,11 +619,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0x24, 0x46); mdelay(1); write_phy_ofdm(dev, 0x25, 0x20); mdelay(1); write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_ofdm(dev, 0x27, 0x08); /* Ver B. might work also fo ver C&D ?*/ - else -#endif write_phy_ofdm(dev, 0x27, 0x88); mdelay(1); /* Ver C & D & 8187*/ @@ -824,11 +636,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_cck(dev, 0x4, 0x7e); mdelay(1); write_phy_cck(dev, 0x5, 0x12); mdelay(1); write_phy_cck(dev, 0x6, 0xfc); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_cck(dev, 0x7, 0xd8); /* Ver B */ - else -#endif write_phy_cck(dev, 0x7, 0x78);mdelay(1); /* Ver C & D & 8187*/ @@ -837,11 +644,6 @@ void rtl8225_rf_init(struct net_device *dev) write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1); write_phy_cck(dev, 0x11, 0x88); mdelay(1); write_phy_cck(dev, 0x12, 0x47); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_cck(dev, 0x13, 0x98); /* Ver B */ - else -#endif write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/ write_phy_cck(dev, 0x19, 0x0); diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c index 485b1b3a911b..8d18be80a5e6 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -46,26 +46,6 @@ u8 rtl8225z2_gain_a[]={ 0x63,0x24,0x4f,//,0x37,// -70dbm 0x73,0x0f,0x4c,//,0x37,// -66dbm }; -#if 0 -u32 rtl8225_chan[] = { - 0, //dummy channel 0 - 0x085c, //1 - 0x08dc, //2 - 0x095c, //3 - 0x09dc, //4 - 0x0a5c, //5 - 0x0adc, //6 - 0x0b5c, //7 - 0x0bdc, //8 - 0x0c5c, //9 - 0x0cdc, //10 - 0x0d5c, //11 - 0x0ddc, //12 - 0x0e5c, //13 - //0x0f5c, //14 - 0x0f72, // 14 -}; -#endif //- u16 rtl8225z2_rxgain[]={ @@ -94,19 +74,6 @@ u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[]={ 0x1e,0x1f,0x20,0x21,0x22,0x23, }; -#if 0 -//- -u8 rtl8225_agc[]={ - 0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96, - 0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86, - 0x85,0x84,0x83,0x82,0x81,0x80,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36, - 0x35,0x34,0x33,0x32,0x31,0x30,0x2f,0x2e,0x2d,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x26, - 0x25,0x24,0x23,0x22,0x21,0x20,0x1f,0x1e,0x1d,0x1c,0x1b,0x1a,0x19,0x18,0x17,0x16, - 0x15,0x14,0x13,0x12,0x11,0x10,0x0f,0x0e,0x0d,0x0c,0x0b,0x0a,0x09,0x08,0x07,0x06, - 0x05,0x04,0x03,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, - 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, -}; -#endif /* from 0 to 0x23 u8 rtl8225_tx_gain_cck_ofdm[]={ @@ -155,40 +122,6 @@ void rtl8225z2_set_gain(struct net_device *dev, short gain) } -#if 0 - -void rtl8225_set_gain(struct net_device *dev, short gain) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - - if(priv->card_8185 == 2) - write_phy_ofdm(dev, 0x21, 0x27); - else - write_phy_ofdm(dev, 0x21, 0x37); - - write_phy_ofdm(dev, 0x25, 0x20); - write_phy_ofdm(dev, 0x11, 0x6); - - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_ofdm(dev, 0x27, 0x8); - else - write_phy_ofdm(dev, 0x27, 0x88); - - write_phy_ofdm(dev, 0x14, 0); - write_phy_ofdm(dev, 0x16, 0); - write_phy_ofdm(dev, 0x15, 0x40); - write_phy_ofdm(dev, 0x17, 0x40); - - write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]); - write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]); - write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]); - write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]); - //rtl8225_set_gain_usb(dev, gain); -} -#endif - u32 read_rtl8225(struct net_device *dev, u8 adr) { u32 data2Write = ((u32)(adr & 0x1f)) << 27; @@ -284,76 +217,7 @@ u32 read_rtl8225(struct net_device *dev, u8 adr) return dataRead; } -#if 0 -void write_rtl8225(struct net_device *dev, u8 adr, u16 data) -{ - int i; - u16 out,select; - u8 bit; - u32 bangdata = (data << 4) | (adr & 0xf); - struct r8180_priv *priv = ieee80211_priv(dev); - - out = read_nic_word(dev, RFPinsOutput) & 0xfff3; - write_nic_word(dev,RFPinsEnable, - (read_nic_word(dev,RFPinsEnable) | 0x7)); - - select = read_nic_word(dev, RFPinsSelect); - - write_nic_word(dev, RFPinsSelect, select | 0x7 | - ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO)); - - force_pci_posting(dev); - udelay(10); - - write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN );//| 0x1fff); - - force_pci_posting(dev); - udelay(2); - - write_nic_word(dev, RFPinsOutput, out); - - force_pci_posting(dev); - udelay(10); - - - for(i=15; i>=0;i--){ - - bit = (bangdata & (1<> i; - - write_nic_word(dev, RFPinsOutput, bit | out); - - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - - i--; - bit = (bangdata & (1<> i; - - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - - write_nic_word(dev, RFPinsOutput, bit | out); - - } - - write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN); - - force_pci_posting(dev); - udelay(10); - - write_nic_word(dev, RFPinsOutput, out | - ((priv->card_type == USB) ? 4 : BB_HOST_BANG_EN)); - - write_nic_word(dev, RFPinsSelect, select | - ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO)); - - if(priv->card_type == USB) - mdelay(2); - else - rtl8185_rf_pins_enable(dev); -} - -#endif short rtl8225_is_V_z2(struct net_device *dev) { short vz2 = 1; @@ -364,13 +228,7 @@ short rtl8225_is_V_z2(struct net_device *dev) /* reg 8 pg 1 = 23*/ //printk(KERN_WARNING "RF Rigisters:\n"); -#if 0 - for(i = 0; i <= 0xf; i++) - printk(KERN_WARNING "%08x,", read_rtl8225(dev, i)); - //printk(KERN_WARNING "reg[9]@pg1 = 0x%x\n", read_rtl8225(dev, 0x0F)); -// printk(KERN_WARNING "RF:\n"); -#endif if( read_rtl8225(dev, 8) != 0x588) vz2 = 0; @@ -385,38 +243,6 @@ short rtl8225_is_V_z2(struct net_device *dev) } -#if 0 -void rtl8225_rf_close(struct net_device *dev) -{ - write_rtl8225(dev, 0x4, 0x1f); - - force_pci_posting(dev); - mdelay(1); - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF); -} -#endif -#if 0 -short rtl8225_rf_set_sens(struct net_device *dev, short sens) -{ - if (sens <0 || sens > 6) return -1; - - if(sens > 4) - write_rtl8225(dev, 0x0c, 0x850); - else - write_rtl8225(dev, 0x0c, 0x50); - - sens= 6-sens; - rtl8225_set_gain(dev, sens); - - write_phy_cck(dev, 0x41, rtl8225_threshold[sens]); - return 0; - -} -#endif - - void rtl8225z2_rf_close(struct net_device *dev) { RF_WriteReg(dev, 0x4, 0x1f); @@ -514,39 +340,7 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch) // u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];//-by amy 080312 char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);//+by amy 080312 char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);//+by amy 080312 -#if 0 - // - // CCX 2 S31, AP control of client transmit power: - // 1. We shall not exceed Cell Power Limit as possible as we can. - // 2. Tolerance is +/- 5dB. - // 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit. - // - // TODO: - // 1. 802.11h power contraint - // - // 071011, by rcnjko. - // - if( priv->OpMode == RT_OP_MODE_INFRASTRUCTURE && - priv->bWithCcxCellPwr && - ch == priv->dot11CurrentChannelNumber) - { - u8 CckCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_B, pMgntInfo->CcxCellPwr); - u8 OfdmCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_G, pMgntInfo->CcxCellPwr); - printk("CCX Cell Limit: %d dBm => CCK Tx power index : %d, OFDM Tx power index: %d\n", - priv->CcxCellPwr, CckCellPwrIdx, OfdmCellPwrIdx); - printk("EEPROM channel(%d) => CCK Tx power index: %d, OFDM Tx power index: %d\n", - channel, CckTxPwrIdx, OfdmTxPwrIdx); - - if(cck_power_level > CckCellPwrIdx) - cck_power_level = CckCellPwrIdx; - if(ofdm_power_level > OfdmCellPwrIdx) - ofdm_power_level = OfdmCellPwrIdx; - - printk("Altered CCK Tx power index : %d, OFDM Tx power index: %d\n", - CckTxPwrIdx, OfdmTxPwrIdx); - } -#endif if(IS_DOT11D_ENABLE(priv->ieee80211) && IS_DOT11D_STATE_DONE(priv->ieee80211) ) { @@ -642,14 +436,6 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch) mdelay(1); } -#if 0 -/* switch between mode B and G */ -void rtl8225_set_mode(struct net_device *dev, short modeb) -{ - write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40)); - write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40)); -} -#endif void rtl8225z2_rf_set_chan(struct net_device *dev, short ch) { @@ -672,86 +458,8 @@ void rtl8225z2_rf_set_chan(struct net_device *dev, short ch) force_pci_posting(dev); mdelay(10); -//deleted by David : 2006/8/9 -#if 0 - write_nic_byte(dev,SIFS,0x22);// SIFS: 0x22 - - if(gset) - write_nic_byte(dev,DIFS,20); //DIFS: 20 - else - write_nic_byte(dev,DIFS,0x24); //DIFS: 36 - - if(priv->ieee80211->state == IEEE80211_LINKED && - ieee80211_is_shortslot(priv->ieee80211->current_network)) - write_nic_byte(dev,SLOT,0x9); //SLOT: 9 - - else - write_nic_byte(dev,SLOT,0x14); //SLOT: 20 (0x14) - - - if(gset){ - write_nic_byte(dev,EIFS,91 - 20); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0x73); //CW VALUE: 0x37 - //DMESG("using G net params"); - }else{ - write_nic_byte(dev,EIFS,91 - 0x24); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0xa5); //CW VALUE: 0x37 - //DMESG("using B net params"); - } -#endif - } -#if 0 -void rtl8225_host_pci_init(struct net_device *dev) -{ - write_nic_word(dev, RFPinsOutput, 0x480); - - rtl8185_rf_pins_enable(dev); - - //if(priv->card_8185 == 2 && priv->enable_gpio0 ) /* version D */ - //write_nic_word(dev, RFPinsSelect, 0x88); - //else - write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); /* 0x488 | SW_CONTROL_GPIO */ - - write_nic_byte(dev, GP_ENABLE, 0); - - force_pci_posting(dev); - mdelay(200); - - write_nic_word(dev, GP_ENABLE, 0xff & (~(1<<6))); /* bit 6 is for RF on/off detection */ - -} - -void rtl8225_host_usb_init(struct net_device *dev) -{ - write_nic_byte(dev,RFPinsSelect+1,0); - - write_nic_byte(dev,GPIO,0); - - write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7)); - - write_nic_byte(dev,RFPinsSelect+1,4); - - write_nic_byte(dev,GPIO,0x20); - - write_nic_byte(dev,GP_ENABLE,0); - - - /* Config BB & RF */ - write_nic_word(dev, RFPinsOutput, 0x80); - - write_nic_word(dev, RFPinsSelect, 0x80); - - write_nic_word(dev, RFPinsEnable, 0x80); - - - mdelay(100); - - mdelay(1000); - -} -#endif void rtl8225z2_rf_init(struct net_device *dev) { struct r8180_priv *priv = ieee80211_priv(dev); @@ -840,12 +548,6 @@ void rtl8225z2_rf_init(struct net_device *dev) for(i=0;i<95;i++){ write_rtl8225(dev, 0x1, (u8)(i+1)); - #if 0 - if(priv->phy_ver == 1) - /* version A */ - write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]); - else - #endif /* version B & C & D*/ write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]); @@ -917,16 +619,6 @@ void rtl8225z2_rf_init(struct net_device *dev) mdelay(1); } -#if 0 - for(i=0;i<128;i++){ - write_phy_ofdm(dev, 0xb, rtl8225_agc[i]); - - mdelay(1); - write_phy_ofdm(dev, 0xa, (u8)i+ 0x80); - - mdelay(1); - } -#endif force_pci_posting(dev); mdelay(1); @@ -958,14 +650,6 @@ void rtl8225z2_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1); - #if 0 - if(priv->card_8185 == 1){ - if(priv->card_8185_Bversion) - write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/ - else - write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/ - }else{ - #endif write_phy_ofdm(dev, 0xf, 0x38);mdelay(1); /*ver D & 8187*/ // } @@ -986,13 +670,6 @@ void rtl8225z2_rf_init(struct net_device *dev) write_phy_ofdm(dev, 0x13, 0x20);mdelay(1); -#if 0 - }else{ - /* Ver B & C*/ - write_phy_ofdm(dev, 0x12, 0x0); - write_phy_ofdm(dev, 0x13, 0x0); - } -#endif write_phy_ofdm(dev, 0x14, 0x0); mdelay(1); write_phy_ofdm(dev, 0x15, 0x40); mdelay(1); write_phy_ofdm(dev, 0x16, 0x0); mdelay(1); @@ -1052,11 +729,6 @@ void rtl8225z2_rf_init(struct net_device *dev) write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1); write_phy_cck(dev, 0x11, 0x88); mdelay(1); write_phy_cck(dev, 0x12, 0x47); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_cck(dev, 0x13, 0x98); /* Ver B */ - else -#endif write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/ write_phy_cck(dev, 0x19, 0x0); @@ -1279,13 +951,6 @@ SetZebraRFPowerState8185( QueueID++; continue; } -#if 0 //reserved amy - else if(priv->NdisAdapter.CurrentPowerState != NdisDeviceStateD0) - { - RT_TRACE(COMP_POWER, DBG_LOUD, ("eRfSleep: %d times TcbBusyQueue[%d] !=0 but lower power state!\n", (pMgntInfo->TxPollingTimes+1), QueueID)); - break; - } -#endif else//lzm mod 080826 { priv->TxPollingTimes ++; @@ -1388,13 +1053,6 @@ SetZebraRFPowerState8185( QueueID++; continue; } -#if 0 - else if(Adapter->NdisAdapter.CurrentPowerState != NdisDeviceStateD0) - { - RT_TRACE(COMP_POWER, DBG_LOUD, ("%d times TcbBusyQueue[%d] !=0 but lower power state!\n", (i+1), QueueID)); - break; - } -#endif else { udelay(10); @@ -1477,39 +1135,6 @@ SetZebraRFPowerState8185( { // Update current RF state variable. priv->eRFPowerState = eRFPowerState; -#if 0 - switch(priv->eRFPowerState) - { - case eRfOff: - // - //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 - // - if(priv->RfOffReason==RF_CHANGE_BY_IPS ) - { - Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK); - } - else - { - // Turn off LED if RF is not ON. - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); - } - break; - - case eRfOn: - // Turn on RF we are still linked, which might happen when - // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. - if( pMgntInfo->bMediaConnect == TRUE ) - { - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); - } - break; - - default: - // do nothing. - break; - } -#endif - } priv->SetRFPowerStateInProgress = false; diff --git a/drivers/staging/rtl8187se/r8180_rtl8255.c b/drivers/staging/rtl8187se/r8180_rtl8255.c index 1a62444dcc50..014efcec91ea 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8255.c +++ b/drivers/staging/rtl8187se/r8180_rtl8255.c @@ -256,14 +256,6 @@ void rtl8255_SetTXPowerLevel(struct net_device *dev, short ch) mdelay(1); //write_nic_byte(dev, TX_AGC_CONTROL,4); } -#if 0 -/* switch between mode B and G */ -void rtl8255_set_mode(struct net_device *dev, short modeb) -{ - write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40)); - write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40)); -} -#endif void rtl8255_rf_set_chan(struct net_device *dev, short ch) { @@ -281,25 +273,6 @@ void rtl8255_rf_set_chan(struct net_device *dev, short ch) rtl8255_SetTXPowerLevel(dev, ch); /* FIXME FIXME FIXME */ - - #if 0 - write_nic_byte(dev,DIFS,0xe); //DIFS - write_nic_byte(dev,SLOT,0x14); //SLOT - write_nic_byte(dev,EIFS,0x5b); // EIFS - //write_nic_byte(dev,0xbc,0); //CW CONFIG - write_nic_byte(dev,0xbd,0xa4); //CW VALUE - //write_nic_byte(dev,TX_AGC_CONTROL,4); - //write_nic_byte(dev, 0x9d,7); -//Apr 20 13:25:03 localhost kernel: w8. 409d<-7 // CCK AGC - /*write_nic_word(dev,0x84,0x488); - write_nic_byte(dev,0x91,0x3e); - write_nic_byte(dev,0x90,0x30); - write_nic_word(dev,0x84,0x488); - write_nic_byte(dev,0x91,0x3e); - write_nic_byte(dev,0x90,0x20); - */ - //mdelay(100); - #endif } void rtl8255_init_BGband(struct net_device *dev) @@ -1807,11 +1780,7 @@ void rtl8255_rf_init(struct net_device *dev) write_phy_cck(dev, 0x4a, 0x0); write_phy_cck(dev, 0x4b, 0x0); // write_phy_cck(dev, 0x4c, 0x5); -#if 0 - write_phy_cck(dev, 0x41, 0x9d); /* Energy Threshold */ - // TESTR 0xb 8187 - write_phy_cck(dev, 0x10, 0x93);// & 0xfb); -#endif + //rtl8255_set_gain(dev, 1); /* FIXME this '1' is random */ rtl8255_SetTXPowerLevel(dev, priv->chan); diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 939a5bf4bf11..ac5dbb15ff36 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -1569,36 +1569,7 @@ static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev) wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; return wstats; } -#if 0 - spin_lock_irqsave(&ieee->lock, flag); - list_for_each_entry(target, &ieee->network_list, list) - { - if (is_same_network(target, &ieee->current_network, ieee)) - { - printk("it's same network:%s\n", target->ssid); -#if 0 - if (!tmp_level) - { - tmp_level = target->stats.signalstrength; - tmp_qual = target->stats.signal; - } - else - { - tmp_level = (15*tmp_level + target->stats.signalstrength)/16; - tmp_qual = (15*tmp_qual + target->stats.signal)/16; - } -#else - tmp_level = target->stats.signal; - tmp_qual = target->stats.signalstrength; - tmp_noise = target->stats.noise; - printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise); -#endif - break; - } - } - spin_unlock_irqrestore(&ieee->lock, flag); -#endif tmp_level = (&ieee->current_network)->stats.signal; tmp_qual = (&ieee->current_network)->stats.signalstrength; tmp_noise = (&ieee->current_network)->stats.noise; diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index 88cfb26f4465..6aa52cb8eb5a 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -1194,11 +1194,6 @@ ZEBRA_Config_85BASIC_HardCode( RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); // Rx mode//+edward RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); // Rx mode//+edward -#if 0//-edward - RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); - RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); - RF_WriteReg(dev, 0x00, 0x009F); mdelay(1); -#endif RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); // Rx mode//+edward RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); // Rx mode//+edward //power save parameters. @@ -1218,14 +1213,7 @@ ZEBRA_Config_85BASIC_HardCode( CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 */ -#if 0 - write_nic_dword(dev, PHY_ADR, 0x0100c880); - write_nic_dword(dev, PHY_ADR, 0x01001c86); - write_nic_dword(dev, PHY_ADR, 0x01007890); - write_nic_dword(dev, PHY_ADR, 0x0100d0ae); - write_nic_dword(dev, PHY_ADR, 0x010006af); - write_nic_dword(dev, PHY_ADR, 0x01004681); -#endif + write_phy_cck(dev,0x00,0xc8); write_phy_cck(dev,0x06,0x1c); write_phy_cck(dev,0x10,0x78); @@ -1294,64 +1282,6 @@ ZEBRA_Config_85BASIC_HardCode( // Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity); //by amy 080312} -#if 0 - // Config Sw/Hw Antenna Diversity - if( priv->bSwAntennaDiverity ) // Use SW+Hw Antenna Diversity - { - if( priv->bDefaultAntenna1 == true ) // aux antenna - { - // Mac register, aux antenna - write_nic_byte(dev, ANTSEL, 0x00); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb - write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09 - write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7 - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0d, 0x54); // Reg0d : 54 - write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2 - } - else // main antenna - { - // Mac register, main antenna - write_nic_byte(dev, ANTSEL, 0x03); - //base band - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b - write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09 - write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7 - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c - write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2 - } - } - else // Disable Antenna Diversity - { - if( priv->bDefaultAntenna1 == true ) // aux Antenna - { - // Mac register, aux antenna - write_nic_byte(dev, ANTSEL, 0x00); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb - write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09 - write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47 - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0d, 0x54); // Reg0d : 54 - write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32 - } - else // main Antenna - { - // Mac register, main antenna - write_nic_byte(dev, ANTSEL, 0x03); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b - write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09 - write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47 - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c - write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32 - } - } -#endif //by amy for antenna } @@ -1378,69 +1308,6 @@ UpdateInitialGain( switch(priv->rf_chip) { -#if 0 - case RF_ZEBRA2: - // Dynamic set initial gain, by shien chang, 2006.07.14 - switch(priv->InitialGain) - { - case 1: //m861dBm - DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfa85); mdelay(1); - break; - - case 2: //m862dBm - DMESG("RTL8185B + 8225 Initial Gain State 2: -82 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - case 3: //m863dBm - DMESG("RTL8185B + 8225 Initial Gain State 3: -82 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0x96a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - case 4: //m864dBm - DMESG("RTL8185B + 8225 Initial Gain State 4: -78 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - case 5: //m82dBm - DMESG("RTL8185B + 8225 Initial Gain State 5: -74 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x3697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - case 6: //m78dBm - DMESG("RTL8185B + 8225 Initial Gain State 6: -70 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x4697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - case 7: //m74dBm - DMESG("RTL8185B + 8225 Initial Gain State 7: -66 dBm \n"); - write_nic_dword(dev, PhyAddr, 0x5697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1); - break; - - default: //MP - DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm (default)\n"); - write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1); - write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1); - write_nic_dword(dev, PhyAddr, 0xfa85); mdelay(1); - break; - } - break; -#endif case RF_ZEBRA4: // Dynamic set initial gain, follow 87B switch(priv->InitialGain) @@ -1657,9 +1524,6 @@ HwConfigureRTL8185( // We shall set up the ARFR according to user's setting. //write_nic_word(dev, ARFR, 0x0fff); // set 1M ~ 54M //by amy -#if 0 - PlatformIOWrite2Byte(dev, ARFR, 0x0fff); // set 1M ~ 54M -#endif // Aadded by Roger, 2007.11.15. PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps. //by amy @@ -1731,9 +1595,6 @@ MacConfig_85BASIC( // Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. //PlatformIOWrite4Byte(dev, RFTiming, 0x00004001); //by amy -#if 0 - write_nic_dword(dev, RFTiming, 0x00004001); -#endif // power save parameter based on "87SE power save parameters 20071127.doc", as follow. //Enable DA10 TX power saving @@ -2118,16 +1979,6 @@ MgntDisconnectIBSS( notify_wx_assoc_event(priv->ieee80211); // Stop SW Beacon.Use hw beacon so do not need to do so.by amy -#if 0 - if(pMgntInfo->bEnableSwBeaconTimer) - { - // SwBeaconTimer will stop if pMgntInfo->mIbss==FALSE, see SwBeaconCallback() for details. -// comment out by haich, 2007.10.01 -//#if DEV_BUS_TYPE==USB_INTERFACE - PlatformCancelTimer( Adapter, &pMgntInfo->SwBeaconTimer); -//#endif - } -#endif // MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE ); @@ -2483,19 +2334,7 @@ InactivePowerSave( // // To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. // -#if 0 - while( index < 4 ) - { - if( ( pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP104_Encryption ) || - (pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP40_Encryption) ) - { - if( pMgntInfo->SecurityInfo.KeyLen[index] != 0) - pAdapter->HalFunc.SetKeyHandler(pAdapter, index, 0, FALSE, pMgntInfo->SecurityInfo.PairwiseEncAlgorithm, TRUE, FALSE); - } - index++; - } -#endif priv->bSwRfProcessing = false; } @@ -2782,58 +2621,6 @@ void rtl8185b_rx_enable(struct net_device *dev) //u32 rxconf; /* for now we accept data, management & ctl frame*/ struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); -#if 0 - rxconf=read_nic_dword(dev,RX_CONF); - rxconf = rxconf &~ MAC_FILTER_MASK; - rxconf = rxconf | (1<flags & IFF_PROMISC) DMESG ("NIC in promisc mode"); - - if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ - dev->flags & IFF_PROMISC){ - rxconf = rxconf | (1<card_8185 == 0) - rxconf = rxconf | (1<ieee80211->iw_mode == IW_MODE_MASTER){ - rxconf = rxconf | (1<ieee80211->iw_mode == IW_MODE_MONITOR){ - rxconf = rxconf | (1<crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) - rxconf = rxconf | (1<card_8185){ - rxconf = rxconf &~ RX_FIFO_THRESHOLD_MASK; - rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<card_8185) - rxconf = rxconf | RCR_ONLYERLPKT; - - rxconf = rxconf &~ RCR_CS_MASK; - if(!priv->card_8185) - rxconf |= (priv->rcr_csense<flags & IFF_PROMISC) DMESG ("NIC in promisc mode"); @@ -2875,76 +2662,6 @@ void rtl8185b_tx_enable(struct net_device *dev) //u32 txconf; struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); -#if 0 - txconf= read_nic_dword(dev,TX_CONF); - if(priv->card_8185){ - - - byte = read_nic_byte(dev,CW_CONF); - byte &= ~(1<card_8185){ - - txconf = txconf &~ (1<retry_data<retry_rts<card_8185){ - if(priv->hw_plcp_len) - txconf = txconf &~ TCR_PLCP_LEN; - else - txconf = txconf | TCR_PLCP_LEN; - }else{ - txconf = txconf &~ TCR_SAT; - } - txconf = txconf &~ TCR_MXDMA_MASK; - txconf = txconf | (TCR_MXDMA_2048<ieee80211->hw_wep) -// txconf=txconf &~ (1<TransmitConfig); byte = read_nic_byte(dev, MSR); byte |= MSR_LINK_ENEDCA; -- 2.39.5