From 57b165948fe0e1cca78bca1fe1e1ae9a38baedd2 Mon Sep 17 00:00:00 2001 From: Michael D Labriola Date: Wed, 1 Feb 2012 10:05:00 -0500 Subject: [PATCH] x86/reboot: Reduce to a single DMI table for reboot quirks This commit reduces the X86_32 reboot_dmi_table and the X86_64 pci_reboot_dmi_table into a single table with a single set of functions (e.g., only 1 call to core_initcall). The table entries that use set_bios_reboot are grouped together inside a #define CONFIG_X86_32 block. Note that there's a single entry that uses set_kbd_reboot, which used to be available only on X86_32. This commit moves that entry outside the X86_32 block because it seems it never should have been in there. There's multiple places in reboot.c that assume KBD is valid regardless of X86_32/X86_64. Signed-off-by: Michael D Labriola Cc: Matthew Garrett Link: http://lkml.kernel.org/n/tip-lv3aliubas2l3aenq8v3uklk@git.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 176 ++++++++++++++++++--------------------- 1 file changed, 83 insertions(+), 93 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index d840e69a853c..e73973769076 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -150,6 +150,80 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } +extern const unsigned char machine_real_restart_asm[]; +extern const u64 machine_real_restart_gdt[3]; + +void machine_real_restart(unsigned int type) +{ + void *restart_va; + unsigned long restart_pa; + void (*restart_lowmem)(unsigned int); + u64 *lowmem_gdt; + + local_irq_disable(); + + /* Write zero to CMOS register number 0x0f, which the BIOS POST + routine will recognize as telling it to do a proper reboot. (Well + that's what this book in front of me says -- it may only apply to + the Phoenix BIOS though, it's not clear). At the same time, + disable NMIs by setting the top bit in the CMOS address register, + as we're about to do peculiar things to the CPU. I'm not sure if + `outb_p' is needed instead of just `outb'. Use it to be on the + safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.) + */ + spin_lock(&rtc_lock); + CMOS_WRITE(0x00, 0x8f); + spin_unlock(&rtc_lock); + + /* + * Switch back to the initial page table. + */ + load_cr3(initial_page_table); + + /* Write 0x1234 to absolute memory location 0x472. The BIOS reads + this on booting to tell it to "Bypass memory test (also warm + boot)". This seems like a fairly standard thing that gets set by + REBOOT.COM programs, and the previous reset routine did this + too. */ + *((unsigned short *)0x472) = reboot_mode; + + /* Patch the GDT in the low memory trampoline */ + lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); + + restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); + restart_pa = virt_to_phys(restart_va); + restart_lowmem = (void (*)(unsigned int))restart_pa; + + /* GDT[0]: GDT self-pointer */ + lowmem_gdt[0] = + (u64)(sizeof(machine_real_restart_gdt) - 1) + + ((u64)virt_to_phys(lowmem_gdt) << 16); + /* GDT[1]: 64K real mode code segment */ + lowmem_gdt[1] = + GDT_ENTRY(0x009b, restart_pa, 0xffff); + + /* Jump to the identity-mapped low memory code */ + restart_lowmem(type); +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(machine_real_restart); +#endif + +#endif /* CONFIG_X86_32 */ + +/* + * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot + */ +static int __init set_pci_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_CF9) { + reboot_type = BOOT_CF9; + printk(KERN_INFO "%s series board detected. " + "Selecting PCI-method for reboots.\n", d->ident); + } + return 0; +} + static int __init set_kbd_reboot(const struct dmi_system_id *d) { if (reboot_type != BOOT_KBD) { @@ -159,7 +233,11 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d) return 0; } +/* This is a single dmi_table handling all reboot quirks. Note that + * REBOOT_BIOS is only available for 32bit + */ static struct dmi_system_id __initdata reboot_dmi_table[] = { +#ifdef CONFIG_X86_32 { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, .ident = "Dell E520", @@ -309,6 +387,8 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, +#endif /* CONFIG_X86_32 */ + { /* Handle reboot issue on Acer Aspire one */ .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", @@ -317,96 +397,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), }, }, - { } -}; - -static int __init reboot_init(void) -{ - /* Only do the DMI check if reboot_type hasn't been overridden - * on the command line - */ - if (reboot_default) { - dmi_check_system(reboot_dmi_table); - } - return 0; -} -core_initcall(reboot_init); - -extern const unsigned char machine_real_restart_asm[]; -extern const u64 machine_real_restart_gdt[3]; - -void machine_real_restart(unsigned int type) -{ - void *restart_va; - unsigned long restart_pa; - void (*restart_lowmem)(unsigned int); - u64 *lowmem_gdt; - - local_irq_disable(); - - /* Write zero to CMOS register number 0x0f, which the BIOS POST - routine will recognize as telling it to do a proper reboot. (Well - that's what this book in front of me says -- it may only apply to - the Phoenix BIOS though, it's not clear). At the same time, - disable NMIs by setting the top bit in the CMOS address register, - as we're about to do peculiar things to the CPU. I'm not sure if - `outb_p' is needed instead of just `outb'. Use it to be on the - safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.) - */ - spin_lock(&rtc_lock); - CMOS_WRITE(0x00, 0x8f); - spin_unlock(&rtc_lock); - - /* - * Switch back to the initial page table. - */ - load_cr3(initial_page_table); - - /* Write 0x1234 to absolute memory location 0x472. The BIOS reads - this on booting to tell it to "Bypass memory test (also warm - boot)". This seems like a fairly standard thing that gets set by - REBOOT.COM programs, and the previous reset routine did this - too. */ - *((unsigned short *)0x472) = reboot_mode; - - /* Patch the GDT in the low memory trampoline */ - lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); - - restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); - restart_pa = virt_to_phys(restart_va); - restart_lowmem = (void (*)(unsigned int))restart_pa; - - /* GDT[0]: GDT self-pointer */ - lowmem_gdt[0] = - (u64)(sizeof(machine_real_restart_gdt) - 1) + - ((u64)virt_to_phys(lowmem_gdt) << 16); - /* GDT[1]: 64K real mode code segment */ - lowmem_gdt[1] = - GDT_ENTRY(0x009b, restart_pa, 0xffff); - - /* Jump to the identity-mapped low memory code */ - restart_lowmem(type); -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(machine_real_restart); -#endif - -#endif /* CONFIG_X86_32 */ - -/* - * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot - */ -static int __init set_pci_reboot(const struct dmi_system_id *d) -{ - if (reboot_type != BOOT_CF9) { - reboot_type = BOOT_CF9; - printk(KERN_INFO "%s series board detected. " - "Selecting PCI-method for reboots.\n", d->ident); - } - return 0; -} - -static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { { /* Handle problems with rebooting on Apple MacBook5 */ .callback = set_pci_reboot, .ident = "Apple MacBook5", @@ -474,17 +464,17 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { { } }; -static int __init pci_reboot_init(void) +static int __init reboot_init(void) { /* Only do the DMI check if reboot_type hasn't been overridden * on the command line */ if (reboot_default) { - dmi_check_system(pci_reboot_dmi_table); + dmi_check_system(reboot_dmi_table); } return 0; } -core_initcall(pci_reboot_init); +core_initcall(reboot_init); static inline void kb_wait(void) { -- 2.39.5