From 57fdb58fa5a140bdd52cf4c4ffc30df73676f0a5 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Mon, 12 Jun 2006 18:12:21 -0400 Subject: [PATCH] ieee1394/ohci1394: CycleTooLong interrupt management This patch modifies the ohci1394.c file to enable and manage the "cycle too long" interrupt. If this interrupt occurs, the "LinkControl.CycleMaster" bit of the host controller is reseted. This implies, that the host controller does not send "cycle start" packet anymore freezing then the isochronous communication. The management of the interrupt added by the patch is that when the interrupt occurs, the OHCI irq handler prints a kernel log warning and then sets the "LinkControl.CycleMaster" bit again resuming the isochronous communication. Signed-off-by: Jean-Baptiste Mur Signed-off-by: Stefan Richter Signed-off-by: Ben Collins --- drivers/ieee1394/ohci1394.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 8c43065a6055..643094c3339c 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -580,6 +580,7 @@ static void ohci_initialize(struct ti_ohci *ohci) OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | + OHCI1394_cycleTooLong | OHCI1394_cycleInconsistent); /* Enable link */ @@ -2386,6 +2387,15 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id, PRINT(KERN_ERR, "physical posted write error"); /* no recovery strategy yet, had to involve protocol drivers */ } + if (event & OHCI1394_cycleTooLong) { + if(printk_ratelimit()) + PRINT(KERN_WARNING, "isochronous cycle too long"); + else + DBGMSG("OHCI1394_cycleTooLong"); + reg_write(ohci, OHCI1394_LinkControlSet, + OHCI1394_LinkControl_CycleMaster); + event &= ~OHCI1394_cycleTooLong; + } if (event & OHCI1394_cycleInconsistent) { /* We subscribe to the cycleInconsistent event only to * clear the corresponding event bit... otherwise, -- 2.39.2