From 5823b3a63c7661272ea7fef7635955e2a50d17eb Mon Sep 17 00:00:00 2001 From: Hartmut Hackmann Date: Tue, 22 Apr 2008 14:46:08 -0300 Subject: [PATCH] V4L/DVB (7392): saa7134: support 2nd DVB-S section of the MD8800 There are some restrictions: - The 2nd DVB-S section will only work if the 1st is configured for DVB-S too. so "options saa7134-dvb use_frontend=0,1" won't work. - Currently it is not possible to set the higher LNB supply voltages, so 14V instead of 13V in the 2nd section. - It is not possibe to turn off the 2nd LNB supply independently. This comes from the problem that the 2nd section can't access the i2c interface of the LNB supply chip. Signed-off-by: Hartmut Hackmann Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-dvb.c | 106 ++++++++++++++++------ 1 file changed, 77 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index a29d800616b..8e55c7572b4 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -33,6 +33,7 @@ #include "saa7134.h" #include #include "dvb-pll.h" +#include #include "mt352.h" #include "mt352_priv.h" /* FIXME */ @@ -94,7 +95,7 @@ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); udelay(10); ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); - dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off"); + dprintk("%s %s\n", __func__, ok ? "on" : "off"); if (!ok) saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); @@ -114,7 +115,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; struct saa7134_dev *dev= fe->dvb->priv; - dprintk("%s called\n", __FUNCTION__); + dprintk("%s called\n", __func__); mt352_write(fe, clock_config, sizeof(clock_config)); udelay(200); @@ -882,6 +883,33 @@ static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) return res; }; +static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct saa7134_dev *dev = fe->dvb->priv; + u8 wbuf[2] = { 0x1f, 00 }; + u8 rbuf; + struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, + { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; + + if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) + return -EIO; + /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ + if (voltage == SEC_VOLTAGE_18) + wbuf[1] = rbuf | 0x10; + else + wbuf[1] = rbuf & 0xef; + msg[0].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 1); + return 0; +} + +static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) +{ + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); + return -EIO; +} + /* ================================================================== * nxt200x based ATSC cards, helper functions */ @@ -1003,11 +1031,11 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { - wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); } } } @@ -1036,27 +1064,35 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); if (dev->dvb.frontend) { - struct dvb_frontend *fe; + struct dvb_frontend *fe = dev->dvb.frontend; + u8 dev_id = dev->eedata[2]; + u8 data = 0xc4; + struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) wprintk("%s: Medion Quadro, no tda826x " - "found !\n", __FUNCTION__); - /* Note 10.2. Hac - * up to here. configuration for ctx948 and and one branch - * of md8800 should be identical - */ - /* we need to open the i2c gate (we know it exists) */ - fe = dev->dvb.frontend; - fe->ops.i2c_gate_ctrl(fe, 1); - if (dvb_attach(isl6405_attach, fe, - &dev->i2c_adap, 0x08, 0, 0) == NULL) - wprintk("%s: Medion Quadro, no ISL6405 " - "found !\n", __FUNCTION__); - fe->ops.i2c_gate_ctrl(fe, 0); - dev->original_set_voltage = fe->ops.set_voltage; - fe->ops.set_voltage = md8800_set_voltage; - dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; - fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + "found !\n", __func__); + if (dev_id != 0x08) { + /* we need to open the i2c gate (we know it exists) */ + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) + wprintk("%s: Medion Quadro, no ISL6405 " + "found !\n", __func__); + /* fire up the 2nd section of the LNB supply since we can't do + this from the other section */ + msg.buf = &data; + i2c_transfer(&dev->i2c_adap, &msg, 1); + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } else { + fe->ops.set_voltage = md8800_set_voltage2; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; + } } } break; @@ -1082,11 +1118,11 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - wprintk("%s: No tda826x found!\n", __FUNCTION__); + wprintk("%s: No tda826x found!\n", __func__); } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - wprintk("%s: No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: No ISL6421 found!\n", __func__); } } break; @@ -1138,10 +1174,10 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) - wprintk("%s: No tda826x found!\n", __FUNCTION__); + wprintk("%s: No tda826x found!\n", __func__); if (dvb_attach(lnbp21_attach, dev->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) - wprintk("%s: No lnbp21 found!\n", __FUNCTION__); + wprintk("%s: No lnbp21 found!\n", __func__); } break; case SAA7134_BOARD_CREATIX_CTX953: @@ -1164,14 +1200,14 @@ static int dvb_init(struct saa7134_dev *dev) if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) wprintk("%s: MD7134 DVB-S, no SD1878 " - "found !\n", __FUNCTION__); + "found !\n", __func__); /* we need to open the i2c gate (we know it exists) */ fe = dev->dvb.frontend; fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, &dev->i2c_adap, 0x08, 0, 0) == NULL) wprintk("%s: MD7134 DVB-S, no ISL6405 " - "found !\n", __FUNCTION__); + "found !\n", __func__); fe->ops.i2c_gate_ctrl(fe, 0); dev->original_set_voltage = fe->ops.set_voltage; fe->ops.set_voltage = md8800_set_voltage; @@ -1239,8 +1275,20 @@ static int dvb_fini(struct saa7134_dev *dev) /* otherwise we don't detect the tuner on next insmod */ saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg); + } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { + if ((dev->eedata[2] != 0x08) && use_frontend) { + /* turn off the 2nd lnb supply */ + u8 data = 0x80; + struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; + struct dvb_frontend *fe; + fe = dev->dvb.frontend; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + fe->ops.i2c_gate_ctrl(fe, 0); + } + } } - videobuf_dvb_unregister(&dev->dvb); return 0; } -- 2.39.5