From 59b24dad20d41c00b51f5ca549a9e83a53671bc9 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 14 Apr 2016 14:58:43 -0400 Subject: [PATCH] rtl8xxxu: Reorg more code to match the flow of the 8192eu vendor driver This further reorganizes the init code flow to match that of the 8192eu vendor driver. This helps diffing the register write log against that of the vendor driver. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 109 +++++++++--------- 1 file changed, 56 insertions(+), 53 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index d67b88665194..c6c41ba2a511 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -7468,34 +7468,39 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) goto exit; } - dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); if (!macpower) { - ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); - if (ret) { - dev_warn(dev, "%s: LLT table init failed\n", __func__); - goto exit; - } + if (priv->ep_tx_normal_queue) + val8 = TX_PAGE_NUM_NORM_PQ; + else + val8 = 0; - /* - * Presumably this is for 8188EU as well - * Enable TX report and TX report timer - */ - if (priv->rtl_chip == RTL8723B) { - val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); - val8 |= TX_REPORT_CTRL_TIMER_ENABLE; - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); - /* Set MAX RPT MACID */ - rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02); - /* TX report Timer. Unit: 32us */ - rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0); + rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); - /* tmp ps ? */ - val8 = rtl8xxxu_read8(priv, 0xa3); - val8 &= 0xf8; - rtl8xxxu_write8(priv, 0xa3, val8); - } + val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD; + + if (priv->ep_tx_high_queue) + val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); + if (priv->ep_tx_low_queue) + val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); + + rtl8xxxu_write32(priv, REG_RQPN, val32); } + ret = rtl8xxxu_init_queue_priority(priv); + dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); + if (ret) + goto exit; + + /* + * Set RX page boundary + */ + if (priv->rtl_chip == RTL8723B) + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f); + else if (priv->rtl_chip == RTL8192E) + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3cff); + else + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff); + ret = rtl8xxxu_download_firmware(priv); dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret); if (ret) @@ -7634,22 +7639,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) } if (!macpower) { - if (priv->ep_tx_normal_queue) - val8 = TX_PAGE_NUM_NORM_PQ; - else - val8 = 0; - - rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8); - - val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD; - - if (priv->ep_tx_high_queue) - val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT); - if (priv->ep_tx_low_queue) - val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT); - - rtl8xxxu_write32(priv, REG_RQPN, val32); - /* * Set TX buffer boundary */ @@ -7668,20 +7657,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8); } - ret = rtl8xxxu_init_queue_priority(priv); - dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret); - if (ret) - goto exit; - - /* - * Set RX page boundary - */ - if (priv->rtl_chip == RTL8723B) - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f); - else if (priv->rtl_chip == RTL8192E) - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3cff); - else - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff); /* * Transfer page size is always 128 */ @@ -7693,6 +7668,34 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_TX_SHIFT); rtl8xxxu_write8(priv, REG_PBP, val8); + dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); + if (!macpower) { + ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM); + if (ret) { + dev_warn(dev, "%s: LLT table init failed\n", __func__); + goto exit; + } + + /* + * Presumably this is for 8188EU as well + * Enable TX report and TX report timer + */ + if (priv->rtl_chip == RTL8723B) { + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 |= TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + /* Set MAX RPT MACID */ + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02); + /* TX report Timer. Unit: 32us */ + rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0); + + /* tmp ps ? */ + val8 = rtl8xxxu_read8(priv, 0xa3); + val8 &= 0xf8; + rtl8xxxu_write8(priv, 0xa3, val8); + } + } + /* * Unit in 8 bytes, not obvious what it is used for */ -- 2.39.5