From 5df014df12b1178e0b76b7273913ce1531ecf20e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 22 Aug 2014 05:54:55 +0100 Subject: [PATCH] mmc: mmci: Add sdio enable mask in variant data This patch adds sdio enable mask in variant data, SOCs like ST have special bits in datactrl register to enable sdio. Unconditionally setting this bit in this driver breaks other SOCs like Qualcomm which maps this bits to something else, so making this enable bit to come from variant data solves the issue. Originally the issue is detected while testing WLAN ath6kl on Qualcomm APQ8064. Reviewed-by: Linus Walleij Signed-off-by: Srinivas Kandagatla Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index c85b0d8ee727..370cd5ad111c 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -67,6 +67,7 @@ static unsigned int fmax = 515633; * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl * register + * @datactrl_mask_sdio: SDIO enable mask in datactrl register * @pwrreg_powerup: power up value for MMCIPOWER register * @f_max: maximum clk frequency supported by the controller. * @signal_direction: input/out direction of bus signals can be indicated @@ -88,6 +89,7 @@ struct variant_data { unsigned int fifohalfsize; unsigned int data_cmd_enable; unsigned int datactrl_mask_ddrmode; + unsigned int datactrl_mask_sdio; bool sdio; bool st_clkdiv; bool blksz_datactrl16; @@ -136,6 +138,7 @@ static struct variant_data variant_u300 = { .clkreg_enable = MCI_ST_U300_HWFCEN, .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, .datalength_bits = 16, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .sdio = true, .pwrreg_powerup = MCI_PWR_ON, .f_max = 100000000, @@ -149,6 +152,7 @@ static struct variant_data variant_nomadik = { .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, @@ -166,6 +170,7 @@ static struct variant_data variant_ux500 = { .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, @@ -185,6 +190,7 @@ static struct variant_data variant_ux500v2 = { .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE, .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .sdio = true, .st_clkdiv = true, .blksz_datactrl16 = true, @@ -808,16 +814,10 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; - /* The ST Micro variants has a special bit to enable SDIO */ if (variant->sdio && host->mmc->card) if (mmc_card_sdio(host->mmc->card)) { - /* - * The ST Micro variants has a special bit - * to enable SDIO. - */ u32 clk; - - datactrl |= MCI_ST_DPSM_SDIOEN; + datactrl |= variant->datactrl_mask_sdio; /* * The ST Micro variant for SDIO small write transfers -- 2.39.5