From 5fb07792821c91dab5d78fee203109c64e21c41c Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Wed, 19 Dec 2012 18:48:45 +0800 Subject: [PATCH] ENGR00237742 busfreq:fix IPG_PERCLK will be decreased to 6M once exit low bus on Sabresd board, IPG_PERCLK will be fixed on 6Mhz once system enter low bus, and never restore to 22Mhz which be set in boot. It means some device clock which sourcing from IPG_PERCLK such as I2C will be slow down. The root cause is that there is workaround for GPT timer of Arik TO1.0 in mx6_ddr_freq.S. GPT clock source from IPG_PERCLK on TO1.0 and should be fixed on 6Mhz. But for TO1.1 and TO1.2 ,the workaround should be removed. Signed-off-by: Robin Gong --- arch/arm/mach-mx6/mx6_ddr_freq.S | 53 +++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx6/mx6_ddr_freq.S b/arch/arm/mach-mx6/mx6_ddr_freq.S index 19fb49179cfd..8d649f336085 100644 --- a/arch/arm/mach-mx6/mx6_ddr_freq.S +++ b/arch/arm/mach-mx6/mx6_ddr_freq.S @@ -103,11 +103,24 @@ periph_clk_switch4: cmp r0, #0 bne periph_clk_switch4 + ldr r0, =ANATOP_BASE_ADDR + add r0, r0, #PERIPBASE_VIRT + ldr r1, [r0, #0x260] + mov r2, r1 + /*Is mx6q?*/ + and r1, r1, #0xff0000 + cmp r1, #0x630000 + bne skip_gpt_workaround1 + /*Is mx6q TO1.0?*/ + and r2, r2, #0xff + cmp r2, #0x0 + bne skip_gpt_workaround1 /* Change the GPT divider so that its at 6MHz. */ ldr r0, [r6, #0x1C] bic r0, r0, #0x3F orr r0, r0, #0xA str r0, [r6, #0x1C] +skip_gpt_workaround1: .endm .macro switch_to_400MHz @@ -193,12 +206,24 @@ wait_div_update400_2: cmp r0, #0 bne wait_div_update400_2 + ldr r0, =ANATOP_BASE_ADDR + add r0, r0, #PERIPBASE_VIRT + ldr r1, [r0, #0x260] + mov r2, r1 + /*Is mx6q?*/ + and r1, r1, #0xff0000 + cmp r1, #0x630000 + bne skip_gpt_workaround2 + /*Is mx6q TO1.0?*/ + and r2, r2, #0xff + cmp r2, #0x0 + bne skip_gpt_workaround2 /* Change the GPT divider so that its at 6MHz. */ ldr r0, [r6, #0x1C] bic r0, r0, #0x3F orr r0, r0, #0xA str r0, [r6, #0x1C] - +skip_gpt_workaround2: .endm .macro switch_to_50MHz @@ -265,11 +290,24 @@ periph_clk_switch2: cmp r0, #0 bne periph_clk_switch2 + ldr r0, =ANATOP_BASE_ADDR + add r0, r0, #PERIPBASE_VIRT + ldr r1, [r0, #0x260] + mov r2, r1 + /*Is mx6q?*/ + and r1, r1, #0xff0000 + cmp r1, #0x630000 + bne skip_gpt_workaround3 + /*Is mx6q TO1.0?*/ + and r2, r2, #0xff + cmp r2, #0x0 + bne skip_gpt_workaround3 /* Change the GPT divider so that its at 6MHz. */ ldr r0, [r6, #0x1C] bic r0, r0, #0x3F orr r0, r0, #0x1 str r0, [r6, #0x1C] +skip_gpt_workaround3: .endm @@ -311,11 +349,24 @@ wait_div_update: cmp r0, #0 bne wait_div_update + ldr r0, =ANATOP_BASE_ADDR + add r0, r0, #PERIPBASE_VIRT + ldr r1, [r0, #0x260] + mov r2, r1 + /*Is mx6q?*/ + and r1, r1, #0xff0000 + cmp r1, #0x630000 + bne skip_gpt_workaround4 + /*Is mx6q TO1.0?*/ + and r2, r2, #0xff + cmp r2, #0x0 + bne skip_gpt_workaround4 /* Change the GPT divider so that its at 6MHz. */ ldr r0, [r6, #0x1C] bic r0, r0, #0x3F orr r0, r0, #0x1 str r0, [r6, #0x1C] +skip_gpt_workaround4: .endm -- 2.39.5