From 62810e5a9df3f47b7261e5d78fc1c33e550f2171 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 26 Nov 2012 17:22:13 +0100 Subject: [PATCH] drm/i915: enable intel_lvds->pre_pll_enable for ilk+, too Only two things needed adjustment: - pipe select for PCH_CPT - There's no dithering bit on ilk+ in the lvds ctl reg Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 40 ---------------------------- drivers/gpu/drm/i915/intel_lvds.c | 24 ++++++++++------- 2 files changed, 15 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bb080fbde808..5958b3bd8650 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5322,7 +5322,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, bool ok, has_reduced_clock = false; bool is_lvds = false, is_dp = false, is_cpu_edp = false; struct intel_encoder *encoder; - u32 temp; int ret; bool dither, fdi_config_ok; @@ -5386,45 +5385,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } else intel_put_pch_pll(intel_crtc); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - temp = I915_READ(PCH_LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) { - temp &= ~PORT_TRANS_SEL_MASK; - temp |= PORT_TRANS_SEL_CPT(pipe); - } else { - if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; - else - temp &= ~LVDS_PIPEB_SELECT; - } - - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - temp |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - temp |= LVDS_VSYNC_POLARITY; - I915_WRITE(PCH_LVDS, temp); - } - if (is_dp && !is_cpu_edp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index c93ec03974d6..778106961e80 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -104,17 +104,20 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder) int pipe = intel_crtc->pipe; u32 temp; - /* pch split platforms are not yet converted. */ - if (HAS_PCH_SPLIT(dev)) - return; - temp = I915_READ(lvds_encoder->reg); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (pipe == 1) { - temp |= LVDS_PIPEB_SELECT; + + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; + temp |= PORT_TRANS_SEL_CPT(pipe); } else { - temp &= ~LVDS_PIPEB_SELECT; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } } + /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to @@ -129,8 +132,11 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - /* set the dithering flag on LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4) { + + /* Set the dithering flag on LVDS as needed, note that there is no + * special lvds dither control bit on pch-split platforms, dithering is + * only controlled through the PIPECONF reg. */ + if (INTEL_INFO(dev)->gen == 4) { if (dev_priv->lvds_dither) temp |= LVDS_ENABLE_DITHER; else -- 2.39.5