From 63219a2fe4653b0936daa0058bad2a65be12efa0 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 20 Dec 2016 16:31:14 +0100 Subject: [PATCH] dt-bindings: power: supply: sbs-charger bindings Adds device tree documentation for SBS charger compilant devices as defined here: http://sbs-forum.org/specs/sbc110.pdf Signed-off-by: Nicolas Saenz Julienne Acked-by: Rob Herring Signed-off-by: Sebastian Reichel --- .../bindings/power/supply/sbs_sbs-charger.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt new file mode 100644 index 000000000000..a3719623a94f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt @@ -0,0 +1,23 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties: + - compatible: ",", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; -- 2.39.5