From 6416c0409dda00aa66b2a4615044fb59d80f6bb2 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Mon, 11 Jun 2012 15:31:14 +0100 Subject: [PATCH] ARM: pxa: hx4700: Fix basic suspend/resume Basic suspend/resume is fixed by ensuring that the PGSR registers are set correctly before sleep mode is entered. In particular four of the active low resets need to be driven high while in sleep mode, otherwise the unit resets itself instead of suspending. Another problem was that the PCFR_GPROD bit is set by the HTC bootloader; this caused GPIO reset (i.e. the reset button) to fail immediately after returning from sleep mode. Signed-off-by: Paul Parsons Cc: Philipp Zabel Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/hx4700.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d09da6a746b8..d3de84b0dcbe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO19_SSP2_SCLK, GPIO86_SSP2_RXD, GPIO87_SSP2_TXD, - GPIO88_GPIO, + GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */ + + /* BQ24022 Regulator */ + GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */ + GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */ /* HX4700 specific input GPIOs */ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ @@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO14_GPIO, /* nWLAN_IRQ */ /* HX4700 specific output GPIOs */ + GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */ + GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ GPIO10_GPIO, /* GSM_IRQ */ @@ -872,14 +880,19 @@ static struct gpio global_gpios[] = { { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" }, }; static void __init hx4700_init(void) { int ret; + PCFR = PCFR_GPR_EN | PCFR_OPDE; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); -- 2.39.2