From 649a1a0ef28e5db99e838060f415a111566c63ea Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 7 Jun 2011 23:16:29 +0100 Subject: [PATCH] ASoC: Report errors when we have a WM8962 IRQ and don't get FLL lock We really should be getting the interrupt - if we don't get one it's very likely that the configuration is incorrect and audio will fail. Also increase the timeout substantially in this case for safety. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/codecs/wm8962.c | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index b0cb4368d1b4..8493e336b3cd 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2186,6 +2186,8 @@ static int sysclk_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + unsigned long timeout; int src; int fll; @@ -2205,9 +2207,19 @@ static int sysclk_event(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_PRE_PMU: - if (fll) + if (fll) { snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, WM8962_FLL_ENA); + if (wm8962->irq) { + timeout = msecs_to_jiffies(5); + timeout = wait_for_completion_timeout(&wm8962->fll_lock, + timeout); + + if (timeout == 0) + dev_err(codec->dev, + "Timed out starting FLL\n"); + } + } break; case SND_SOC_DAPM_POST_PMD: @@ -3263,16 +3275,31 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout); - /* This should be a massive overestimate */ - timeout = msecs_to_jiffies(1); + ret = 0; + + if (fll1 & WM8962_FLL_ENA) { + /* This should be a massive overestimate but go even + * higher if we'll error out + */ + if (wm8962->irq) + timeout = msecs_to_jiffies(5); + else + timeout = msecs_to_jiffies(1); + + timeout = wait_for_completion_timeout(&wm8962->fll_lock, + timeout); - wait_for_completion_timeout(&wm8962->fll_lock, timeout); + if (timeout == 0 && wm8962->irq) { + dev_err(codec->dev, "FLL lock timed out"); + ret = -ETIMEDOUT; + } + } wm8962->fll_fref = Fref; wm8962->fll_fout = Fout; wm8962->fll_src = source; - return 0; + return ret; } static int wm8962_mute(struct snd_soc_dai *dai, int mute) -- 2.39.5