From 66b693c3b84876d33afd35b9d717d8b9d07384c8 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 11 Nov 2011 12:17:33 +0200 Subject: [PATCH] ath6kl: move bmi calls to hif driver In preparation for USB support which has it's own method for bmi. Based on code by Kevin Fang. Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/bmi.c | 191 ++-------------------- drivers/net/wireless/ath/ath6kl/hif-ops.h | 10 ++ drivers/net/wireless/ath/ath6kl/hif.h | 2 + drivers/net/wireless/ath/ath6kl/sdio.c | 162 ++++++++++++++++++ 4 files changed, 190 insertions(+), 175 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c index a962fe4c6b7e..12f5b57d2dc2 100644 --- a/drivers/net/wireless/ath/ath6kl/bmi.c +++ b/drivers/net/wireless/ath/ath6kl/bmi.c @@ -19,165 +19,6 @@ #include "target.h" #include "debug.h" -static int ath6kl_get_bmi_cmd_credits(struct ath6kl *ar) -{ - u32 addr; - unsigned long timeout; - int ret; - - ar->bmi.cmd_credits = 0; - - /* Read the counter register to get the command credits */ - addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; - - timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); - while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) { - - /* - * Hit the credit counter with a 4-byte access, the first byte - * read will hit the counter and cause a decrement, while the - * remaining 3 bytes has no effect. The rationale behind this - * is to make all HIF accesses 4-byte aligned. - */ - ret = hif_read_write_sync(ar, addr, - (u8 *)&ar->bmi.cmd_credits, 4, - HIF_RD_SYNC_BYTE_INC); - if (ret) { - ath6kl_err("Unable to decrement the command credit count register: %d\n", - ret); - return ret; - } - - /* The counter is only 8 bits. - * Ignore anything in the upper 3 bytes - */ - ar->bmi.cmd_credits &= 0xFF; - } - - if (!ar->bmi.cmd_credits) { - ath6kl_err("bmi communication timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar) -{ - unsigned long timeout; - u32 rx_word = 0; - int ret = 0; - - timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); - while (time_before(jiffies, timeout) && !rx_word) { - ret = hif_read_write_sync(ar, RX_LOOKAHEAD_VALID_ADDRESS, - (u8 *)&rx_word, sizeof(rx_word), - HIF_RD_SYNC_BYTE_INC); - if (ret) { - ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n"); - return ret; - } - - /* all we really want is one bit */ - rx_word &= (1 << ENDPOINT1); - } - - if (!rx_word) { - ath6kl_err("bmi_recv_buf FIFO empty\n"); - return -EINVAL; - } - - return ret; -} - -static int ath6kl_bmi_send_buf(struct ath6kl *ar, u8 *buf, u32 len) -{ - int ret; - u32 addr; - - ret = ath6kl_get_bmi_cmd_credits(ar); - if (ret) - return ret; - - addr = ar->mbox_info.htc_addr; - - ret = hif_read_write_sync(ar, addr, buf, len, - HIF_WR_SYNC_BYTE_INC); - if (ret) - ath6kl_err("unable to send the bmi data to the device\n"); - - return ret; -} - -static int ath6kl_bmi_recv_buf(struct ath6kl *ar, u8 *buf, u32 len) -{ - int ret; - u32 addr; - - /* - * During normal bootup, small reads may be required. - * Rather than issue an HIF Read and then wait as the Target - * adds successive bytes to the FIFO, we wait here until - * we know that response data is available. - * - * This allows us to cleanly timeout on an unexpected - * Target failure rather than risk problems at the HIF level. - * In particular, this avoids SDIO timeouts and possibly garbage - * data on some host controllers. And on an interconnect - * such as Compact Flash (as well as some SDIO masters) which - * does not provide any indication on data timeout, it avoids - * a potential hang or garbage response. - * - * Synchronization is more difficult for reads larger than the - * size of the MBOX FIFO (128B), because the Target is unable - * to push the 129th byte of data until AFTER the Host posts an - * HIF Read and removes some FIFO data. So for large reads the - * Host proceeds to post an HIF Read BEFORE all the data is - * actually available to read. Fortunately, large BMI reads do - * not occur in practice -- they're supported for debug/development. - * - * So Host/Target BMI synchronization is divided into these cases: - * CASE 1: length < 4 - * Should not happen - * - * CASE 2: 4 <= length <= 128 - * Wait for first 4 bytes to be in FIFO - * If CONSERVATIVE_BMI_READ is enabled, also wait for - * a BMI command credit, which indicates that the ENTIRE - * response is available in the the FIFO - * - * CASE 3: length > 128 - * Wait for the first 4 bytes to be in FIFO - * - * For most uses, a small timeout should be sufficient and we will - * usually see a response quickly; but there may be some unusual - * (debug) cases of BMI_EXECUTE where we want an larger timeout. - * For now, we use an unbounded busy loop while waiting for - * BMI_EXECUTE. - * - * If BMI_EXECUTE ever needs to support longer-latency execution, - * especially in production, this code needs to be enhanced to sleep - * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently - * a function of Host processor speed. - */ - if (len >= 4) { /* NB: Currently, always true */ - ret = ath6kl_bmi_get_rx_lkahd(ar); - if (ret) - return ret; - } - - addr = ar->mbox_info.htc_addr; - ret = hif_read_write_sync(ar, addr, buf, len, - HIF_RD_SYNC_BYTE_INC); - if (ret) { - ath6kl_err("Unable to read the bmi data from the device: %d\n", - ret); - return ret; - } - - return 0; -} - int ath6kl_bmi_done(struct ath6kl *ar) { int ret; @@ -190,7 +31,7 @@ int ath6kl_bmi_done(struct ath6kl *ar) ar->bmi.done_sent = true; - ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid)); + ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid)); if (ret) { ath6kl_err("Unable to send bmi done: %d\n", ret); return ret; @@ -210,13 +51,13 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar, return -EACCES; } - ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid)); + ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid)); if (ret) { ath6kl_err("Unable to send get target info: %d\n", ret); return ret; } - ret = ath6kl_bmi_recv_buf(ar, (u8 *)&targ_info->version, + ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version, sizeof(targ_info->version)); if (ret) { ath6kl_err("Unable to recv target info: %d\n", ret); @@ -225,7 +66,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar, if (le32_to_cpu(targ_info->version) == TARGET_VERSION_SENTINAL) { /* Determine how many bytes are in the Target's targ_info */ - ret = ath6kl_bmi_recv_buf(ar, + ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->byte_count, sizeof(targ_info->byte_count)); if (ret) { @@ -244,7 +85,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar, } /* Read the remainder of the targ_info */ - ret = ath6kl_bmi_recv_buf(ar, + ret = ath6kl_hif_bmi_read(ar, ((u8 *)targ_info) + sizeof(targ_info->byte_count), sizeof(*targ_info) - @@ -300,13 +141,13 @@ int ath6kl_bmi_read(struct ath6kl *ar, u32 addr, u8 *buf, u32 len) memcpy(&(ar->bmi.cmd_buf[offset]), &rx_len, sizeof(rx_len)); offset += sizeof(len); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); return ret; } - ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, rx_len); + ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, rx_len); if (ret) { ath6kl_err("Unable to read from the device: %d\n", ret); @@ -371,7 +212,7 @@ int ath6kl_bmi_write(struct ath6kl *ar, u32 addr, u8 *buf, u32 len) memcpy(&(ar->bmi.cmd_buf[offset]), src, tx_len); offset += tx_len; - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); @@ -413,13 +254,13 @@ int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param) memcpy(&(ar->bmi.cmd_buf[offset]), param, sizeof(*param)); offset += sizeof(*param); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); return ret; } - ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param)); + ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param)); if (ret) { ath6kl_err("Unable to read from the device: %d\n", ret); return ret; @@ -457,7 +298,7 @@ int ath6kl_bmi_set_app_start(struct ath6kl *ar, u32 addr) memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr)); offset += sizeof(addr); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); return ret; @@ -493,13 +334,13 @@ int ath6kl_bmi_reg_read(struct ath6kl *ar, u32 addr, u32 *param) memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr)); offset += sizeof(addr); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); return ret; } - ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param)); + ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param)); if (ret) { ath6kl_err("Unable to read from the device: %d\n", ret); return ret; @@ -540,7 +381,7 @@ int ath6kl_bmi_reg_write(struct ath6kl *ar, u32 addr, u32 param) memcpy(&(ar->bmi.cmd_buf[offset]), ¶m, sizeof(param)); offset += sizeof(param); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); return ret; @@ -587,7 +428,7 @@ int ath6kl_bmi_lz_data(struct ath6kl *ar, u8 *buf, u32 len) tx_len); offset += tx_len; - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to write to the device: %d\n", ret); @@ -629,7 +470,7 @@ int ath6kl_bmi_lz_stream_start(struct ath6kl *ar, u32 addr) memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr)); offset += sizeof(addr); - ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset); + ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset); if (ret) { ath6kl_err("Unable to start LZ stream to the device: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath6kl/hif-ops.h b/drivers/net/wireless/ath/ath6kl/hif-ops.h index eed22870448b..0c4c602464b7 100644 --- a/drivers/net/wireless/ath/ath6kl/hif-ops.h +++ b/drivers/net/wireless/ath/ath6kl/hif-ops.h @@ -91,6 +91,16 @@ static inline int ath6kl_hif_suspend(struct ath6kl *ar, return ar->hif_ops->suspend(ar, wow); } +static inline int ath6kl_hif_bmi_read(struct ath6kl *ar, u8 *buf, u32 len) +{ + return ar->hif_ops->bmi_read(ar, buf, len); +} + +static inline int ath6kl_hif_bmi_write(struct ath6kl *ar, u8 *buf, u32 len) +{ + return ar->hif_ops->bmi_write(ar, buf, len); +} + static inline int ath6kl_hif_resume(struct ath6kl *ar) { ath6kl_dbg(ATH6KL_DBG_HIF, "hif resume\n"); diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h index f2dc3bcdae4a..42004e9069b6 100644 --- a/drivers/net/wireless/ath/ath6kl/hif.h +++ b/drivers/net/wireless/ath/ath6kl/hif.h @@ -244,6 +244,8 @@ struct ath6kl_hif_ops { void (*cleanup_scatter)(struct ath6kl *ar); int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow); int (*resume)(struct ath6kl *ar); + int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len); + int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len); int (*power_on)(struct ath6kl *ar); int (*power_off)(struct ath6kl *ar); void (*stop)(struct ath6kl *ar); diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c index beb5f9bf26af..080be036a27e 100644 --- a/drivers/net/wireless/ath/ath6kl/sdio.c +++ b/drivers/net/wireless/ath/ath6kl/sdio.c @@ -845,6 +845,166 @@ static int ath6kl_sdio_resume(struct ath6kl *ar) return 0; } +static int ath6kl_sdio_bmi_credits(struct ath6kl *ar) +{ + u32 addr; + unsigned long timeout; + int ret; + + ar->bmi.cmd_credits = 0; + + /* Read the counter register to get the command credits */ + addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) { + + /* + * Hit the credit counter with a 4-byte access, the first byte + * read will hit the counter and cause a decrement, while the + * remaining 3 bytes has no effect. The rationale behind this + * is to make all HIF accesses 4-byte aligned. + */ + ret = ath6kl_sdio_read_write_sync(ar, addr, + (u8 *)&ar->bmi.cmd_credits, 4, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to decrement the command credit " + "count register: %d\n", ret); + return ret; + } + + /* The counter is only 8 bits. + * Ignore anything in the upper 3 bytes + */ + ar->bmi.cmd_credits &= 0xFF; + } + + if (!ar->bmi.cmd_credits) { + ath6kl_err("bmi communication timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar) +{ + unsigned long timeout; + u32 rx_word = 0; + int ret = 0; + + timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT); + while ((time_before(jiffies, timeout)) && !rx_word) { + ret = ath6kl_sdio_read_write_sync(ar, + RX_LOOKAHEAD_VALID_ADDRESS, + (u8 *)&rx_word, sizeof(rx_word), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n"); + return ret; + } + + /* all we really want is one bit */ + rx_word &= (1 << ENDPOINT1); + } + + if (!rx_word) { + ath6kl_err("bmi_recv_buf FIFO empty\n"); + return -EINVAL; + } + + return ret; +} + +static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + ret = ath6kl_sdio_bmi_credits(ar); + if (ret) + return ret; + + addr = ar->mbox_info.htc_addr; + + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_WR_SYNC_BYTE_INC); + if (ret) + ath6kl_err("unable to send the bmi data to the device\n"); + + return ret; +} + +static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len) +{ + int ret; + u32 addr; + + /* + * During normal bootup, small reads may be required. + * Rather than issue an HIF Read and then wait as the Target + * adds successive bytes to the FIFO, we wait here until + * we know that response data is available. + * + * This allows us to cleanly timeout on an unexpected + * Target failure rather than risk problems at the HIF level. + * In particular, this avoids SDIO timeouts and possibly garbage + * data on some host controllers. And on an interconnect + * such as Compact Flash (as well as some SDIO masters) which + * does not provide any indication on data timeout, it avoids + * a potential hang or garbage response. + * + * Synchronization is more difficult for reads larger than the + * size of the MBOX FIFO (128B), because the Target is unable + * to push the 129th byte of data until AFTER the Host posts an + * HIF Read and removes some FIFO data. So for large reads the + * Host proceeds to post an HIF Read BEFORE all the data is + * actually available to read. Fortunately, large BMI reads do + * not occur in practice -- they're supported for debug/development. + * + * So Host/Target BMI synchronization is divided into these cases: + * CASE 1: length < 4 + * Should not happen + * + * CASE 2: 4 <= length <= 128 + * Wait for first 4 bytes to be in FIFO + * If CONSERVATIVE_BMI_READ is enabled, also wait for + * a BMI command credit, which indicates that the ENTIRE + * response is available in the the FIFO + * + * CASE 3: length > 128 + * Wait for the first 4 bytes to be in FIFO + * + * For most uses, a small timeout should be sufficient and we will + * usually see a response quickly; but there may be some unusual + * (debug) cases of BMI_EXECUTE where we want an larger timeout. + * For now, we use an unbounded busy loop while waiting for + * BMI_EXECUTE. + * + * If BMI_EXECUTE ever needs to support longer-latency execution, + * especially in production, this code needs to be enhanced to sleep + * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently + * a function of Host processor speed. + */ + if (len >= 4) { /* NB: Currently, always true */ + ret = ath6kl_bmi_get_rx_lkahd(ar); + if (ret) + return ret; + } + + addr = ar->mbox_info.htc_addr; + ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath6kl_err("Unable to read the bmi data from the device: %d\n", + ret); + return ret; + } + + return 0; +} + static void ath6kl_sdio_stop(struct ath6kl *ar) { struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar); @@ -889,6 +1049,8 @@ static const struct ath6kl_hif_ops ath6kl_sdio_ops = { .cleanup_scatter = ath6kl_sdio_cleanup_scatter, .suspend = ath6kl_sdio_suspend, .resume = ath6kl_sdio_resume, + .bmi_read = ath6kl_sdio_bmi_read, + .bmi_write = ath6kl_sdio_bmi_write, .power_on = ath6kl_sdio_power_on, .power_off = ath6kl_sdio_power_off, .stop = ath6kl_sdio_stop, -- 2.39.2