From 66cde97da7cbbc940cb3f3dbf9e8f0ac56431f8c Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 19 Dec 2011 23:39:47 +0100 Subject: [PATCH] s3fb: fix Virge/VX Add memory size detection for Virge/VX and small delay in mode setting (same as in X.org driver) to fix blank screen problem. Also adjust DTPC position to fix garbled screen in some modes (tested that this adjustment does not break other cards - at least Trio32, Trio64V+, Trio64V2/DX, Virge, Virge/DX). Tested on ELSA Winner 2000AVI/3D. Signed-off-by: Ondrej Zary Signed-off-by: Florian Tobias Schandinat --- drivers/video/s3fb.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index 946a949f4c7d..2c80246b18b8 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -727,7 +727,7 @@ static int s3fb_set_par(struct fb_info *info) if (par->chip == CHIP_988_VIRGE_VX) { vga_wcrt(par->state.vgabase, 0x50, 0x00); vga_wcrt(par->state.vgabase, 0x67, 0x50); - + msleep(10); /* screen remains blank sometimes without this */ vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09); vga_wcrt(par->state.vgabase, 0x66, 0x90); } @@ -901,7 +901,8 @@ static int s3fb_set_par(struct fb_info *info) /* Set Data Transfer Position */ hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8; - value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1); + /* + 2 is needed for Virge/VX, does no harm on other cards */ + value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1); svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value); memset_io(info->screen_base, 0x00, screen_size); @@ -1216,6 +1217,31 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i info->screen_size = 2 << 20; break; } + } else if (par->chip == CHIP_988_VIRGE_VX) { + switch ((regval & 0x60) >> 5) { + case 0: /* 2MB */ + info->screen_size = 2 << 20; + break; + case 1: /* 4MB */ + info->screen_size = 4 << 20; + break; + case 2: /* 6MB */ + info->screen_size = 6 << 20; + break; + case 3: /* 8MB */ + info->screen_size = 8 << 20; + break; + } + /* off-screen memory */ + regval = vga_rcrt(par->state.vgabase, 0x37); + switch ((regval & 0x60) >> 5) { + case 1: /* 4MB */ + info->screen_size -= 4 << 20; + break; + case 2: /* 2MB */ + info->screen_size -= 2 << 20; + break; + } } else info->screen_size = s3_memsizes[regval >> 5] << 10; info->fix.smem_len = info->screen_size; -- 2.39.5