From 69749ba762ef195c04c37513b7e9a84a4c96c66a Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 24 May 2013 18:47:24 +0900 Subject: [PATCH] gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. The motivation for this is to allow use of the gpio-keys driver on the lager board which is based on the r8a7790 SoC. The V2 of this patch has been fully exercised using that driver on that board. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- drivers/gpio/gpio-rcar.c | 26 ++++++++++++++++++++----- include/linux/platform_data/gpio-rcar.h | 1 + 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 0f3d6473bf89..d173d56dbb8c 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -49,6 +49,7 @@ struct gpio_rcar_priv { #define POSNEG 0x20 #define EDGLEVEL 0x24 #define FILONOFF 0x28 +#define BOTHEDGE 0x4c static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) { @@ -91,7 +92,8 @@ static void gpio_rcar_irq_enable(struct irq_data *d) static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, unsigned int hwirq, bool active_high_rising_edge, - bool level_trigger) + bool level_trigger, + bool both) { unsigned long flags; @@ -108,6 +110,10 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, /* Configure edge or level trigger in EDGLEVEL */ gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); + /* Select one edge or both edges in BOTHEDGE */ + if (p->config.has_both_edge_trigger) + gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); + /* Select "Interrupt Input Mode" in IOINTSEL */ gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); @@ -127,16 +133,26 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_LEVEL_HIGH: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, + false); break; case IRQ_TYPE_LEVEL_LOW: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, + false); break; case IRQ_TYPE_EDGE_RISING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + false); break; case IRQ_TYPE_EDGE_FALLING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, + false); + break; + case IRQ_TYPE_EDGE_BOTH: + if (!p->config.has_both_edge_trigger) + return -EINVAL; + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + true); break; default: return -EINVAL; diff --git a/include/linux/platform_data/gpio-rcar.h b/include/linux/platform_data/gpio-rcar.h index aba7079ccc95..6c0027a3c370 100644 --- a/include/linux/platform_data/gpio-rcar.h +++ b/include/linux/platform_data/gpio-rcar.h @@ -21,6 +21,7 @@ struct gpio_rcar_config { unsigned int irq_base; unsigned int number_of_pins; const char *pctl_name; + unsigned has_both_edge_trigger:1; }; #endif /* __GPIO_RCAR_H__ */ -- 2.39.5