From 6ce5f02ef7edd33ebdac27953b52c489a6005e6d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 19 Feb 2013 21:39:58 -0700 Subject: [PATCH] ARM: bcm2835: add SPI device to DT The BCM2835 has a single instance of the "SPI0"-type SPI master controller. Instantiate it in the SoC .dtsi file, Don't enable it in the Raspberry Pi board .dts file, since we have no idea what is actually connected, and hence no idea what to set the bus clock rate to. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/bcm2835.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..3eb60f7aa1fe 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -64,6 +64,16 @@ #interrupt-cells = <2>; }; + spi: spi@20204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@20205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; @@ -107,5 +117,12 @@ #clock-cells = <0>; clock-frequency = <150000000>; }; + + clk_spi: spi { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; }; }; -- 2.39.5