From 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 11 Jul 2008 11:50:53 +0200 Subject: [PATCH] hwmon: Cleaning hwmon devices Clean Makefile Move device specific values to driver for better reading Signed-off-by: Michal Simek Acked-by: Stefan Roese --- drivers/hwmon/Makefile | 12 +++---- drivers/hwmon/adm1021.c | 35 ++++++++++++++++--- drivers/hwmon/ds1621.c | 12 ++++--- drivers/hwmon/ds1722.c | 5 --- drivers/hwmon/ds1775.c | 8 ++--- drivers/hwmon/lm73.c | 6 ++++ drivers/hwmon/lm75.c | 8 ++--- drivers/hwmon/lm81.c | 8 +++-- include/dtt.h | 77 ++--------------------------------------- 9 files changed, 66 insertions(+), 105 deletions(-) diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 065433a608..61b028f536 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -30,13 +30,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)libhwmon.a -COBJS-y += adm1021.o -COBJS-y += ds1621.o -COBJS-y += ds1722.o -COBJS-y += ds1775.o +COBJS-$(CONFIG_DTT_ADM1021) += adm1021.o +COBJS-$(CONFIG_DTT_DS1621) += ds1621.o +COBJS-$(CONFIG_DS1722) += ds1722.o +COBJS-$(CONFIG_DTT_DS1775) += ds1775.o COBJS-$(CONFIG_DTT_LM73) += lm73.o -COBJS-y += lm75.o -COBJS-y += lm81.o +COBJS-$(CONFIG_DTT_LM75) += lm75.o +COBJS-$(CONFIG_DTT_LM81) += lm81.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 9f65cfb274..b791ec0415 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -33,11 +33,40 @@ #include -#ifdef CONFIG_DTT_ADM1021 - #include #include +#define DTT_READ_LOC_VALUE 0x00 +#define DTT_READ_REM_VALUE 0x01 +#define DTT_READ_STATUS 0x02 +#define DTT_READ_CONFIG 0x03 +#define DTT_READ_CONVRATE 0x04 +#define DTT_READ_LOC_HIGHLIM 0x05 +#define DTT_READ_LOC_LOWLIM 0x06 +#define DTT_READ_REM_HIGHLIM 0x07 +#define DTT_READ_REM_LOWLIM 0x08 +#define DTT_READ_DEVID 0xfe + +#define DTT_WRITE_CONFIG 0x09 +#define DTT_WRITE_CONVRATE 0x0a +#define DTT_WRITE_LOC_HIGHLIM 0x0b +#define DTT_WRITE_LOC_LOWLIM 0x0c +#define DTT_WRITE_REM_HIGHLIM 0x0d +#define DTT_WRITE_REM_LOWLIM 0x0e +#define DTT_WRITE_ONESHOT 0x0f + +#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ +#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ +#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ +#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ +#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ +#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ + +#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ +#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ + +#define DTT_ADM1021_DEVID 0x41 + typedef struct { uint i2c_addr:7; /* 7bit i2c chip address */ @@ -170,5 +199,3 @@ dtt_get_temp (int sensor) return (int) val; } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_ADM1021 */ diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 494818131f..749aa2691b 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -27,7 +27,6 @@ #include -#ifdef CONFIG_DTT_DS1621 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621" @@ -39,6 +38,14 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ +#define DTT_READ_TEMP 0xAA +#define DTT_READ_COUNTER 0xA8 +#define DTT_READ_SLOPE 0xA9 +#define DTT_WRITE_START_CONV 0xEE +#define DTT_WRITE_STOP_CONV 0x22 +#define DTT_TEMP_HIGH 0xA1 +#define DTT_TEMP_LOW 0xA2 +#define DTT_CONFIG 0xAC int dtt_read(int sensor, int reg) { @@ -185,6 +192,3 @@ int dtt_get_temp(int sensor) return (dtt_read(sensor, DTT_READ_TEMP) / 256); } /* dtt_get_temp() */ - - -#endif /* CONFIG_DTT_DS1621 */ diff --git a/drivers/hwmon/ds1722.c b/drivers/hwmon/ds1722.c index c19ee01393..7e2f1ed4fb 100644 --- a/drivers/hwmon/ds1722.c +++ b/drivers/hwmon/ds1722.c @@ -1,8 +1,5 @@ #include - -#ifdef CONFIG_DS1722 - #include static void ds1722_select(int dev) @@ -138,5 +135,3 @@ int ds1722_probe(int dev) printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); return 0; } - -#endif diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c index 0fbb0b42a7..6a4d8e56db 100644 --- a/drivers/hwmon/ds1775.c +++ b/drivers/hwmon/ds1775.c @@ -21,11 +21,14 @@ #include -#ifdef CONFIG_DTT_DS1775 #include #include #define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_OS 0x3 int dtt_read(int sensor, int reg) { @@ -151,6 +154,3 @@ int dtt_get_temp(int sensor) { return (dtt_read(sensor, DTT_READ_TEMP) / 256); } - - -#endif /* CONFIG_DTT_DS1775 */ diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c index 98e8bd2984..dd24683536 100644 --- a/drivers/hwmon/lm73.c +++ b/drivers/hwmon/lm73.c @@ -38,6 +38,12 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* National Semi's LM73 device */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HIGH 0x2 +#define DTT_TEMP_LOW 0x3 +#define DTT_CONTROL 0x4 +#define DTT_ID 0x7 int dtt_read(int const sensor, int const reg) { diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c34851725e..8051cb228c 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,7 +27,6 @@ #include -#ifdef CONFIG_DTT_LM75 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75" @@ -36,11 +35,14 @@ #include #include - /* * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_SET 0x3 int dtt_read(int sensor, int reg) { @@ -200,5 +202,3 @@ int dtt_get_temp(int sensor) } return (int)((int16_t) ret / 256); } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM75 */ diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c index 03bc53d58c..9349eb6ff6 100644 --- a/drivers/hwmon/lm81.c +++ b/drivers/hwmon/lm81.c @@ -32,7 +32,6 @@ #include -#ifdef CONFIG_DTT_LM81 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" @@ -45,6 +44,11 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ +#define DTT_READ_TEMP 0x27 +#define DTT_CONFIG_TEMP 0x4b +#define DTT_TEMP_MAX 0x39 +#define DTT_TEMP_HYST 0x3a +#define DTT_CONFIG 0x40 int dtt_read(int sensor, int reg) { @@ -144,5 +148,3 @@ int dtt_get_temp(int sensor) return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM81 */ diff --git a/include/dtt.h b/include/dtt.h index 4e8aaad87f..34053d10ab 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -40,9 +40,11 @@ #define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */ #define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */ #define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */ + #ifndef CFG_DTT_MAX_TEMP #define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP #endif + #ifndef CFG_DTT_HYSTERESIS #define CFG_DTT_HYSTERESIS 5 /* 5 C */ #endif @@ -54,79 +56,4 @@ extern int dtt_write(int sensor, int reg, int val); extern int dtt_get_temp(int sensor); #endif -#if defined(CONFIG_DTT_LM75) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_SET 0x3 -#endif - -#if defined(CONFIG_DTT_LM81) -#define DTT_READ_TEMP 0x27 -#define DTT_CONFIG_TEMP 0x4b -#define DTT_TEMP_MAX 0x39 -#define DTT_TEMP_HYST 0x3a -#define DTT_CONFIG 0x40 -#endif - -#if defined(CONFIG_DTT_DS1621) -#define DTT_READ_TEMP 0xAA -#define DTT_READ_COUNTER 0xA8 -#define DTT_READ_SLOPE 0xA9 -#define DTT_WRITE_START_CONV 0xEE -#define DTT_WRITE_STOP_CONV 0x22 -#define DTT_TEMP_HIGH 0xA1 -#define DTT_TEMP_LOW 0xA2 -#define DTT_CONFIG 0xAC -#endif - -#if defined(CONFIG_DTT_DS1775) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_OS 0x3 -#endif - -#if defined(CONFIG_DTT_ADM1021) -#define DTT_READ_LOC_VALUE 0x00 -#define DTT_READ_REM_VALUE 0x01 -#define DTT_READ_STATUS 0x02 -#define DTT_READ_CONFIG 0x03 -#define DTT_READ_CONVRATE 0x04 -#define DTT_READ_LOC_HIGHLIM 0x05 -#define DTT_READ_LOC_LOWLIM 0x06 -#define DTT_READ_REM_HIGHLIM 0x07 -#define DTT_READ_REM_LOWLIM 0x08 -#define DTT_READ_DEVID 0xfe - -#define DTT_WRITE_CONFIG 0x09 -#define DTT_WRITE_CONVRATE 0x0a -#define DTT_WRITE_LOC_HIGHLIM 0x0b -#define DTT_WRITE_LOC_LOWLIM 0x0c -#define DTT_WRITE_REM_HIGHLIM 0x0d -#define DTT_WRITE_REM_LOWLIM 0x0e -#define DTT_WRITE_ONESHOT 0x0f - -#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ -#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ -#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ -#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ -#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ -#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ - -#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ -#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ - -#define DTT_ADM1021_DEVID 0x41 -#endif - -#if defined(CONFIG_DTT_LM73) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HIGH 0x2 -#define DTT_TEMP_LOW 0x3 -#define DTT_CONTROL 0x4 -#define DTT_ID 0x7 -#endif - #endif /* _DTT_H_ */ -- 2.39.2