From 6f6a1ac1e930e594ecd016e10291c0626dda0fb6 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 16 Dec 2013 18:12:56 -0700 Subject: [PATCH] ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet. It also explicitly sets the pad to 0x000b0. Before this patch, it has the value 0x1b0b0 if using mainline u-boot. So this patch also removes hysteresis and a 100K pullup since the pad is always an output. Signed-off-by: Troy Kisky Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 2654ff12b5bc..ee3f5c0a0b8b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -114,7 +114,6 @@ imx6q-sabrelite { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; @@ -131,7 +130,11 @@ }; pinctrl_enet: enetgrp { - fsl,pins = ; + fsl,pins = < + MX6QDL_ENET_PINGRP1 + /* Phy reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 + >; }; pinctrl_i2c1: i2c1grp { -- 2.39.5