From 6f73fbcec27be8b074555e18d9f50c3013e4d802 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 19 Sep 2012 19:37:37 +0100 Subject: [PATCH] staging: comedi: ni_labpc: pass ai scan mode through various functions Pass the `enum scan_mode` value calculated by `labpc_ai_scan_mode()` as a parameter to various other functions so they don't have to call it themselves. Amongst others, the affected functions include `labpc_adc_timing()`, `labpc_ai_convert_period()` and `labpc_ai_scan_period()`. `labpc_adc_timing()` calls `labpc_ai_convert_period()` and `labpc_ai_scan_period()` in several places, but the returned values are the same each time, so change it to just call those functions once and re-use the return values. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 124 +++++++++++----------- 1 file changed, 61 insertions(+), 63 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 2d060b5cc1b7..200099e4c220 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -206,6 +206,13 @@ NI manuals: #define INIT_A1_BITS 0x70 #define COUNTER_B_BASE_REG 0x18 +enum scan_mode { + MODE_SINGLE_CHAN, + MODE_SINGLE_CHAN_INTERVAL, + MODE_MULT_CHAN_UP, + MODE_MULT_CHAN_DOWN, +}; + static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s); static irqreturn_t labpc_interrupt(int irq, void *d); static int labpc_drain_fifo(struct comedi_device *dev); @@ -236,7 +243,8 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); -static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd); +static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd, + enum scan_mode scan_mode); #ifdef CONFIG_ISA_DMA_API static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd); #endif @@ -254,13 +262,6 @@ static int labpc_eeprom_write(struct comedi_device *dev, static void write_caldac(struct comedi_device *dev, unsigned int channel, unsigned int value); -enum scan_mode { - MODE_SINGLE_CHAN, - MODE_SINGLE_CHAN_INTERVAL, - MODE_MULT_CHAN_UP, - MODE_MULT_CHAN_DOWN, -}; - /* analog input ranges */ #define NUM_LABPC_PLUS_AI_RANGES 16 /* indicates unipolar ranges */ @@ -839,15 +840,14 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd) } static int labpc_ai_chanlist_invalid(const struct comedi_device *dev, - const struct comedi_cmd *cmd) + const struct comedi_cmd *cmd, + enum scan_mode mode) { - int mode, channel, range, aref, i; + int channel, range, aref, i; if (cmd->chanlist == NULL) return 0; - mode = labpc_ai_scan_mode(cmd); - if (mode == MODE_SINGLE_CHAN) return 0; @@ -911,9 +911,10 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev, return 0; } -static int labpc_use_continuous_mode(const struct comedi_cmd *cmd) +static int labpc_use_continuous_mode(const struct comedi_cmd *cmd, + enum scan_mode mode) { - if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN) + if (mode == MODE_SINGLE_CHAN) return 1; if (cmd->scan_begin_src == TRIG_FOLLOW) @@ -922,24 +923,25 @@ static int labpc_use_continuous_mode(const struct comedi_cmd *cmd) return 0; } -static unsigned int labpc_ai_convert_period(const struct comedi_cmd *cmd) +static unsigned int labpc_ai_convert_period(const struct comedi_cmd *cmd, + enum scan_mode mode) { if (cmd->convert_src != TRIG_TIMER) return 0; - if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN && - cmd->scan_begin_src == TRIG_TIMER) + if (mode == MODE_SINGLE_CHAN && cmd->scan_begin_src == TRIG_TIMER) return cmd->scan_begin_arg; return cmd->convert_arg; } -static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, unsigned int ns) +static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, + enum scan_mode mode, unsigned int ns) { if (cmd->convert_src != TRIG_TIMER) return; - if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN && + if (mode == MODE_SINGLE_CHAN && cmd->scan_begin_src == TRIG_TIMER) { cmd->scan_begin_arg = ns; if (cmd->convert_arg > cmd->scan_begin_arg) @@ -948,25 +950,25 @@ static void labpc_set_ai_convert_period(struct comedi_cmd *cmd, unsigned int ns) cmd->convert_arg = ns; } -static unsigned int labpc_ai_scan_period(const struct comedi_cmd *cmd) +static unsigned int labpc_ai_scan_period(const struct comedi_cmd *cmd, + enum scan_mode mode) { if (cmd->scan_begin_src != TRIG_TIMER) return 0; - if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN && - cmd->convert_src == TRIG_TIMER) + if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER) return 0; return cmd->scan_begin_arg; } -static void labpc_set_ai_scan_period(struct comedi_cmd *cmd, unsigned int ns) +static void labpc_set_ai_scan_period(struct comedi_cmd *cmd, + enum scan_mode mode, unsigned int ns) { if (cmd->scan_begin_src != TRIG_TIMER) return; - if (labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN && - cmd->convert_src == TRIG_TIMER) + if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER) return; cmd->scan_begin_arg = ns; @@ -978,6 +980,7 @@ static int labpc_ai_cmdtest(struct comedi_device *dev, int err = 0; int tmp, tmp2; int stop_mask; + enum scan_mode mode; /* step 1: make sure trigger sources are trivially valid */ @@ -1099,14 +1102,15 @@ static int labpc_ai_cmdtest(struct comedi_device *dev, tmp = cmd->convert_arg; tmp2 = cmd->scan_begin_arg; - labpc_adc_timing(dev, cmd); + mode = labpc_ai_scan_mode(cmd); + labpc_adc_timing(dev, cmd, mode); if (tmp != cmd->convert_arg || tmp2 != cmd->scan_begin_arg) err++; if (err) return 4; - if (labpc_ai_chanlist_invalid(dev, cmd)) + if (labpc_ai_chanlist_invalid(dev, cmd, mode)) return 5; return 0; @@ -1122,6 +1126,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) struct comedi_async *async = s->async; struct comedi_cmd *cmd = &async->cmd; enum transfer_type xfer; + enum scan_mode mode; unsigned long flags; if (!dev->irq) { @@ -1187,6 +1192,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } else xfer = fifo_not_empty_transfer; devpriv->current_transfer = xfer; + mode = labpc_ai_scan_mode(cmd); /* setup command6 register for 1200 boards */ if (thisboard->register_layout == labpc_1200_layout) { @@ -1211,7 +1217,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) else devpriv->command6_bits &= ~A1_INTR_EN_BIT; /* are we scanning up or down through channels? */ - if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP) + if (mode == MODE_MULT_CHAN_UP) devpriv->command6_bits |= ADC_SCAN_UP_BIT; else devpriv->command6_bits &= ~ADC_SCAN_UP_BIT; @@ -1222,19 +1228,18 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* setup channel list, etc (command1 register) */ devpriv->command1_bits = 0; - if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP) + if (mode == MODE_MULT_CHAN_UP) channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]); else channel = CR_CHAN(cmd->chanlist[0]); /* munge channel bits for differential / scan disabled mode */ - if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF) + if (mode != MODE_SINGLE_CHAN && aref == AREF_DIFF) channel *= 2; devpriv->command1_bits |= ADC_CHAN_BITS(channel); devpriv->command1_bits |= thisboard->ai_range_code[range]; devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG); /* manual says to set scan enable bit on second pass */ - if (labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_UP || - labpc_ai_scan_mode(cmd) == MODE_MULT_CHAN_DOWN) { + if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) { devpriv->command1_bits |= ADC_SCAN_EN_BIT; /* need a brief delay before enabling scan, or scan * list will get screwed when you switch @@ -1249,7 +1254,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT; /* XXX should discard first scan when using interval scanning * since manual says it is not synced with scan clock */ - if (labpc_use_continuous_mode(cmd) == 0) { + if (labpc_use_continuous_mode(cmd, mode) == 0) { devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT; if (cmd->scan_begin_src == TRIG_EXT) devpriv->command4_bits |= EXT_SCAN_EN_BIT; @@ -1267,7 +1272,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) if (cmd->convert_src == TRIG_TIMER || cmd->scan_begin_src == TRIG_TIMER) { /* set up pacing */ - labpc_adc_timing(dev, cmd); + labpc_adc_timing(dev, cmd, mode); /* load counter b0 in mode 3 */ ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG, 0, devpriv->divisor_b0, 3); @@ -1277,7 +1282,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) } } /* set up conversion pacing */ - if (labpc_ai_convert_period(cmd)) { + if (labpc_ai_convert_period(cmd, mode)) { /* load counter a0 in mode 2 */ ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG, 0, devpriv->divisor_a0, 2); @@ -1290,7 +1295,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) dev->iobase + COUNTER_A_CONTROL_REG); /* set up scan pacing */ - if (labpc_ai_scan_period(cmd)) { + if (labpc_ai_scan_period(cmd, mode)) { /* load counter b1 in mode 2 */ ret = labpc_counter_load(dev, dev->iobase + COUNTER_B_BASE_REG, 1, devpriv->divisor_b1, 2); @@ -1791,24 +1796,29 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd) #endif /* figures out what counter values to use based on command */ -static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) +static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd, + enum scan_mode mode) { /* max value for 16 bit counter in mode 2 */ const int max_counter_value = 0x10000; /* min value for 16 bit counter in mode 2 */ const int min_counter_value = 2; unsigned int base_period; + unsigned int scan_period; + unsigned int convert_period; /* * if both convert and scan triggers are TRIG_TIMER, then they * both rely on counter b0 */ - if (labpc_ai_convert_period(cmd) && labpc_ai_scan_period(cmd)) { + convert_period = labpc_ai_convert_period(cmd, mode); + scan_period = labpc_ai_scan_period(cmd, mode); + if (convert_period && scan_period) { /* * pick the lowest b0 divisor value we can (for maximum input * clock speed on convert and scan counters) */ - devpriv->divisor_b0 = (labpc_ai_scan_period(cmd) - 1) / + devpriv->divisor_b0 = (scan_period - 1) / (LABPC_TIMER_BASE * max_counter_value) + 1; if (devpriv->divisor_b0 < min_counter_value) devpriv->divisor_b0 = min_counter_value; @@ -1822,25 +1832,19 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) default: case TRIG_ROUND_NEAREST: devpriv->divisor_a0 = - (labpc_ai_convert_period(cmd) + - (base_period / 2)) / base_period; + (convert_period + (base_period / 2)) / base_period; devpriv->divisor_b1 = - (labpc_ai_scan_period(cmd) + - (base_period / 2)) / base_period; + (scan_period + (base_period / 2)) / base_period; break; case TRIG_ROUND_UP: devpriv->divisor_a0 = - (labpc_ai_convert_period(cmd) + (base_period - - 1)) / base_period; + (convert_period + (base_period - 1)) / base_period; devpriv->divisor_b1 = - (labpc_ai_scan_period(cmd) + (base_period - - 1)) / base_period; + (scan_period + (base_period - 1)) / base_period; break; case TRIG_ROUND_DOWN: - devpriv->divisor_a0 = - labpc_ai_convert_period(cmd) / base_period; - devpriv->divisor_b1 = - labpc_ai_scan_period(cmd) / base_period; + devpriv->divisor_a0 = convert_period / base_period; + devpriv->divisor_b1 = scan_period / base_period; break; } /* make sure a0 and b1 values are acceptable */ @@ -1853,18 +1857,15 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) if (devpriv->divisor_b1 > max_counter_value) devpriv->divisor_b1 = max_counter_value; /* write corrected timings to command */ - labpc_set_ai_convert_period(cmd, + labpc_set_ai_convert_period(cmd, mode, base_period * devpriv->divisor_a0); - labpc_set_ai_scan_period(cmd, + labpc_set_ai_scan_period(cmd, mode, base_period * devpriv->divisor_b1); /* * if only one TRIG_TIMER is used, we can employ the generic * cascaded timing functions */ - } else if (labpc_ai_scan_period(cmd)) { - unsigned int scan_period; - - scan_period = labpc_ai_scan_period(cmd); + } else if (scan_period) { /* * calculate cascaded counter values * that give desired scan timing @@ -1874,11 +1875,8 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) &(devpriv->divisor_b0), &scan_period, cmd->flags & TRIG_ROUND_MASK); - labpc_set_ai_scan_period(cmd, scan_period); - } else if (labpc_ai_convert_period(cmd)) { - unsigned int convert_period; - - convert_period = labpc_ai_convert_period(cmd); + labpc_set_ai_scan_period(cmd, mode, scan_period); + } else if (convert_period) { /* * calculate cascaded counter values * that give desired conversion timing @@ -1888,7 +1886,7 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd) &(devpriv->divisor_b0), &convert_period, cmd->flags & TRIG_ROUND_MASK); - labpc_set_ai_convert_period(cmd, convert_period); + labpc_set_ai_convert_period(cmd, mode, convert_period); } } -- 2.39.5