From 71ba49902d35d025b3810d6f19028eff624c67a7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 May 2017 12:32:43 -0300 Subject: [PATCH] ARM: dts: imx23-sansa: Remove 'enable-active-low' property Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. So remove the unexisting 'enable-active-low' property. Currently the GPIO flag is 0, which means active-high. In order to make the dts description accurate, pass the GPIO_ACTIVE_LOW flag instead. This change is safe because the gpio regulator driver does not take the GPIO flag polarity into account. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-sansa.dts | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 4ec32f4c7885..221fd55e967e 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include #include "imx23.dtsi" / { @@ -149,9 +150,8 @@ regulator-name = "vdd-touchpad0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 26 0>; + gpio = <&gpio0 26 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; reg_vdd_tuner: regulator-vdd-tuner0 { @@ -159,9 +159,8 @@ regulator-name = "vdd-tuner0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; backlight { -- 2.39.5