From 71bcada88b0f3c7f11fa5b8a4b30ae66dbfabbf3 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Wed, 3 Sep 2014 10:27:54 -0500 Subject: [PATCH] edac: altera: Add Altera SDRAM EDAC support This patch adds support for the CycloneV and ArriaV SDRAM controllers. Correction and reporting of SBEs, Panic on DBEs. There was a discussion thread on whether this driver should be an mfd driver or just make use of syscon, which is already a mfd. Ultimately, the decision to use a simple syscon interface was reached.[1] [1] https://lkml.org/lkml/2014/7/30/514 [dinguyen] Fixed Kconfig to have EDAC_ALTERA_MC as a tristate to prevent a build failure for allmodconfig. Signed-off-by: Thor Thayer Acked-by: Borislav Petkov [dinguyen] cleaned up commit message Signed-off-by: Dinh Nguyen --- MAINTAINERS | 5 + drivers/edac/Kconfig | 9 + drivers/edac/Makefile | 2 + drivers/edac/altera_edac.c | 410 +++++++++++++++++++++++++++++++++++++ 4 files changed, 426 insertions(+) create mode 100644 drivers/edac/altera_edac.c diff --git a/MAINTAINERS b/MAINTAINERS index 1ff06dee651d..a5dd2d61777a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1376,6 +1376,11 @@ M: Dinh Nguyen S: Maintained F: drivers/clk/socfpga/ +ARM/SOCFPGA EDAC SUPPORT +M: Thor Thayer +S: Maintained +F: drivers/edac/altera_edac. + ARM/STI ARCHITECTURE M: Srinivas Kandagatla M: Maxime Coquelin diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index fd89ca982748..7072c2892d63 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -376,4 +376,13 @@ config EDAC_OCTEON_PCI Support for error detection and correction on the Cavium Octeon family of SOCs. +config EDAC_ALTERA_MC + tristate "Altera SDRAM Memory Controller EDAC" + depends on EDAC_MM_EDAC && ARCH_SOCFPGA + help + Support for error detection and correction on the + Altera SDRAM memory controller. Note that the + preloader must initialize the SDRAM before loading + the kernel. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index c479a24d8f77..359aa499b200 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -65,3 +65,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC) += octeon_edac-pc.o obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o + +obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c new file mode 100644 index 000000000000..3c4929fda9d5 --- /dev/null +++ b/drivers/edac/altera_edac.c @@ -0,0 +1,410 @@ +/* + * Copyright Altera Corporation (C) 2014. All rights reserved. + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + * + * Adapted from the highbank_mc_edac driver. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "edac_core.h" +#include "edac_module.h" + +#define EDAC_MOD_STR "altera_edac" +#define EDAC_VERSION "1" + +/* SDRAM Controller CtrlCfg Register */ +#define CTLCFG_OFST 0x00 + +/* SDRAM Controller CtrlCfg Register Bit Masks */ +#define CTLCFG_ECC_EN 0x400 +#define CTLCFG_ECC_CORR_EN 0x800 +#define CTLCFG_GEN_SB_ERR 0x2000 +#define CTLCFG_GEN_DB_ERR 0x4000 + +#define CTLCFG_ECC_AUTO_EN (CTLCFG_ECC_EN | \ + CTLCFG_ECC_CORR_EN) + +/* SDRAM Controller Address Width Register */ +#define DRAMADDRW_OFST 0x2C + +/* SDRAM Controller Address Widths Field Register */ +#define DRAMADDRW_COLBIT_MASK 0x001F +#define DRAMADDRW_COLBIT_SHIFT 0 +#define DRAMADDRW_ROWBIT_MASK 0x03E0 +#define DRAMADDRW_ROWBIT_SHIFT 5 +#define DRAMADDRW_BANKBIT_MASK 0x1C00 +#define DRAMADDRW_BANKBIT_SHIFT 10 +#define DRAMADDRW_CSBIT_MASK 0xE000 +#define DRAMADDRW_CSBIT_SHIFT 13 + +/* SDRAM Controller Interface Data Width Register */ +#define DRAMIFWIDTH_OFST 0x30 + +/* SDRAM Controller Interface Data Width Defines */ +#define DRAMIFWIDTH_16B_ECC 24 +#define DRAMIFWIDTH_32B_ECC 40 + +/* SDRAM Controller DRAM Status Register */ +#define DRAMSTS_OFST 0x38 + +/* SDRAM Controller DRAM Status Register Bit Masks */ +#define DRAMSTS_SBEERR 0x04 +#define DRAMSTS_DBEERR 0x08 +#define DRAMSTS_CORR_DROP 0x10 + +/* SDRAM Controller DRAM IRQ Register */ +#define DRAMINTR_OFST 0x3C + +/* SDRAM Controller DRAM IRQ Register Bit Masks */ +#define DRAMINTR_INTREN 0x01 +#define DRAMINTR_SBEMASK 0x02 +#define DRAMINTR_DBEMASK 0x04 +#define DRAMINTR_CORRDROPMASK 0x08 +#define DRAMINTR_INTRCLR 0x10 + +/* SDRAM Controller Single Bit Error Count Register */ +#define SBECOUNT_OFST 0x40 + +/* SDRAM Controller Single Bit Error Count Register Bit Masks */ +#define SBECOUNT_MASK 0x0F + +/* SDRAM Controller Double Bit Error Count Register */ +#define DBECOUNT_OFST 0x44 + +/* SDRAM Controller Double Bit Error Count Register Bit Masks */ +#define DBECOUNT_MASK 0x0F + +/* SDRAM Controller ECC Error Address Register */ +#define ERRADDR_OFST 0x48 + +/* SDRAM Controller ECC Error Address Register Bit Masks */ +#define ERRADDR_MASK 0xFFFFFFFF + +/* Altera SDRAM Memory Controller data */ +struct altr_sdram_mc_data { + struct regmap *mc_vbase; +}; + +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct altr_sdram_mc_data *drvdata = mci->pvt_info; + u32 status, err_count, err_addr; + + /* Error Address is shared by both SBE & DBE */ + regmap_read(drvdata->mc_vbase, ERRADDR_OFST, &err_addr); + + regmap_read(drvdata->mc_vbase, DRAMSTS_OFST, &status); + + if (status & DRAMSTS_DBEERR) { + regmap_read(drvdata->mc_vbase, DBECOUNT_OFST, &err_count); + panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n", + err_count, err_addr); + } + if (status & DRAMSTS_SBEERR) { + regmap_read(drvdata->mc_vbase, SBECOUNT_OFST, &err_count); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, 0, + 0, 0, -1, mci->ctl_name, ""); + } + + regmap_write(drvdata->mc_vbase, DRAMINTR_OFST, + (DRAMINTR_INTRCLR | DRAMINTR_INTREN)); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_EDAC_DEBUG +static ssize_t altr_sdr_mc_err_inject_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct mem_ctl_info *mci = file->private_data; + struct altr_sdram_mc_data *drvdata = mci->pvt_info; + u32 *ptemp; + dma_addr_t dma_handle; + u32 reg, read_reg; + + ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL); + if (!ptemp) { + dma_free_coherent(mci->pdev, 16, ptemp, dma_handle); + edac_printk(KERN_ERR, EDAC_MC, + "Inject: Buffer Allocation error\n"); + return -ENOMEM; + } + + regmap_read(drvdata->mc_vbase, CTLCFG_OFST, &read_reg); + read_reg &= ~(CTLCFG_GEN_SB_ERR | CTLCFG_GEN_DB_ERR); + + /* Error are injected by writing a word while the SBE or DBE + * bit in the CTLCFG register is set. Reading the word will + * trigger the SBE or DBE error and the corresponding IRQ. + */ + if (count == 3) { + edac_printk(KERN_ALERT, EDAC_MC, + "Inject Double bit error\n"); + regmap_write(drvdata->mc_vbase, CTLCFG_OFST, + (read_reg | CTLCFG_GEN_DB_ERR)); + } else { + edac_printk(KERN_ALERT, EDAC_MC, + "Inject Single bit error\n"); + regmap_write(drvdata->mc_vbase, CTLCFG_OFST, + (read_reg | CTLCFG_GEN_SB_ERR)); + } + + ptemp[0] = 0x5A5A5A5A; + ptemp[1] = 0xA5A5A5A5; + + /* Clear the error injection bits */ + regmap_write(drvdata->mc_vbase, CTLCFG_OFST, read_reg); + /* Ensure it has been written out */ + wmb(); + + /* + * To trigger the error, we need to read the data back + * (the data was written with errors above). + * The ACCESS_ONCE macros and printk are used to prevent the + * the compiler optimizing these reads out. + */ + reg = ACCESS_ONCE(ptemp[0]); + read_reg = ACCESS_ONCE(ptemp[1]); + /* Force Read */ + rmb(); + + edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n", + reg, read_reg); + + dma_free_coherent(mci->pdev, 16, ptemp, dma_handle); + + return count; +} + +static const struct file_operations altr_sdr_mc_debug_inject_fops = { + .open = simple_open, + .write = altr_sdr_mc_err_inject_write, + .llseek = generic_file_llseek, +}; + +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci) +{ + if (mci->debugfs) + debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci, + &altr_sdr_mc_debug_inject_fops); +} +#else +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci) +{} +#endif + +/* Get total memory size in bytes */ +static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase) +{ + u32 size, read_reg, row, bank, col, cs, width; + + if (regmap_read(mc_vbase, DRAMADDRW_OFST, &read_reg) < 0) + return 0; + + if (regmap_read(mc_vbase, DRAMIFWIDTH_OFST, &width) < 0) + return 0; + + col = (read_reg & DRAMADDRW_COLBIT_MASK) >> + DRAMADDRW_COLBIT_SHIFT; + row = (read_reg & DRAMADDRW_ROWBIT_MASK) >> + DRAMADDRW_ROWBIT_SHIFT; + bank = (read_reg & DRAMADDRW_BANKBIT_MASK) >> + DRAMADDRW_BANKBIT_SHIFT; + cs = (read_reg & DRAMADDRW_CSBIT_MASK) >> + DRAMADDRW_CSBIT_SHIFT; + + /* Correct for ECC as its not addressible */ + if (width == DRAMIFWIDTH_32B_ECC) + width = 32; + if (width == DRAMIFWIDTH_16B_ECC) + width = 16; + + /* calculate the SDRAM size base on this info */ + size = 1 << (row + bank + col); + size = size * cs * (width / 8); + return size; +} + +static int altr_sdram_probe(struct platform_device *pdev) +{ + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct altr_sdram_mc_data *drvdata; + struct regmap *mc_vbase; + struct dimm_info *dimm; + u32 read_reg, mem_size; + int irq; + int res = 0; + + /* Validate the SDRAM controller has ECC enabled */ + /* Grab the register range from the sdr controller in device tree */ + mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "altr,sdr-syscon"); + if (IS_ERR(mc_vbase)) { + edac_printk(KERN_ERR, EDAC_MC, + "regmap for altr,sdr-syscon lookup failed.\n"); + return -ENODEV; + } + + if (regmap_read(mc_vbase, CTLCFG_OFST, &read_reg) || + ((read_reg & CTLCFG_ECC_AUTO_EN) != CTLCFG_ECC_AUTO_EN)) { + edac_printk(KERN_ERR, EDAC_MC, + "No ECC/ECC disabled [0x%08X]\n", read_reg); + return -ENODEV; + } + + /* Grab memory size from device tree. */ + mem_size = altr_sdram_get_total_mem_size(mc_vbase); + if (!mem_size) { + edac_printk(KERN_ERR, EDAC_MC, + "Unable to calculate memory size\n"); + return -ENODEV; + } + + /* Ensure the SDRAM Interrupt is disabled and cleared */ + if (regmap_write(mc_vbase, DRAMINTR_OFST, DRAMINTR_INTRCLR)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error clearing SDRAM ECC IRQ\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + edac_printk(KERN_ERR, EDAC_MC, + "No irq %d in DT\n", irq); + return -ENODEV; + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct altr_sdram_mc_data)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + drvdata = mci->pvt_info; + drvdata->mc_vbase = mc_vbase; + platform_set_drvdata(pdev, mci); + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) { + res = -ENOMEM; + goto free; + } + + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = EDAC_VERSION; + mci->ctl_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_SW_SRC; + mci->dev_name = dev_name(&pdev->dev); + + dimm = *mci->dimms; + dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1; + dimm->grain = 8; + dimm->dtype = DEV_X8; + dimm->mtype = MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + + res = edac_mc_add_mc(mci); + if (res < 0) + goto err; + + res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler, + 0, dev_name(&pdev->dev), mci); + if (res < 0) { + edac_mc_printk(mci, KERN_ERR, + "Unable to request irq %d\n", irq); + res = -ENODEV; + goto err2; + } + + if (regmap_write(drvdata->mc_vbase, DRAMINTR_OFST, + (DRAMINTR_INTRCLR | DRAMINTR_INTREN))) { + edac_mc_printk(mci, KERN_ERR, + "Error enabling SDRAM ECC IRQ\n"); + res = -ENODEV; + goto err2; + } + + altr_sdr_mc_create_debugfs_nodes(mci); + + devres_close_group(&pdev->dev, NULL); + + return 0; + +err2: + edac_mc_del_mc(&pdev->dev); +err: + devres_release_group(&pdev->dev, NULL); +free: + edac_mc_free(mci); + edac_printk(KERN_ERR, EDAC_MC, + "EDAC Probe Failed; Error %d\n", res); + + return res; +} + +static int altr_sdram_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id altr_sdram_ctrl_of_match[] = { + { .compatible = "altr,sdram-edac", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match); + +static struct platform_driver altr_sdram_edac_driver = { + .probe = altr_sdram_probe, + .remove = altr_sdram_remove, + .driver = { + .name = "altr_sdram_edac", + .of_match_table = altr_sdram_ctrl_of_match, + }, +}; + +module_platform_driver(altr_sdram_edac_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thor Thayer"); +MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller"); -- 2.39.5