From 720befbf2ecce8e5851a816fa567584320d721ec Mon Sep 17 00:00:00 2001 From: Ariej Marjieh Date: Mon, 7 Jul 2014 09:04:58 +0300 Subject: [PATCH] iwlwifi: mvm: Define AUX ROC Command Add new AUX ROC command that is intended for HS2.0 purposes. It is used to send ANQP requests on a specific channel. This command requests the firmware to trigger a time event and remain on a certain channel for a given duration. Triggering the time event is done by using the Aux Framework in the firmware, and makes use of the Aux station (similarly to scan). Signed-off-by: Ariej Marjieh Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 67 +++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index b8e4e78d601b..95f5b3274efb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -133,6 +133,7 @@ enum { /* Scan offload */ SCAN_OFFLOAD_REQUEST_CMD = 0x51, SCAN_OFFLOAD_ABORT_CMD = 0x52, + HOT_SPOT_CMD = 0x53, SCAN_OFFLOAD_COMPLETE = 0x6D, SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, SCAN_OFFLOAD_CONFIG_CMD = 0x6f, @@ -910,6 +911,72 @@ struct iwl_phy_context_cmd { __le32 dsp_cfg_flags; } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ +/* + * Aux ROC command + * + * Command requests the firmware to create a time event for a certain duration + * and remain on the given channel. This is done by using the Aux framework in + * the FW. + * The command was first used for Hot Spot issues - but can be used regardless + * to Hot Spot. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @id_and_color: ID and color of the MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the + * event_unique_id should be the id of the time event assigned by ucode. + * Otherwise ignore the event_unique_id. + * @sta_id_and_color: station id and color, resumed during "Remain On Channel" + * activity. + * @channel_info: channel info + * @node_addr: Our MAC Address + * @reserved: reserved for alignment + * @apply_time: GP2 value to start (should always be the current GP2 value) + * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max + * time by which start of the event is allowed to be postponed. + * @duration: event duration in TU To calculate event duration: + * timeEventDuration = min(duration, remainingQuota) + */ +struct iwl_hs20_roc_req { + /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ + __le32 id_and_color; + __le32 action; + __le32 event_unique_id; + __le32 sta_id_and_color; + struct iwl_fw_channel_info channel_info; + u8 node_addr[ETH_ALEN]; + __le16 reserved; + __le32 apply_time; + __le32 apply_time_max_delay; + __le32 duration; +} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ + +/* + * values for AUX ROC result values + */ +enum iwl_mvm_hot_spot { + HOT_SPOT_RSP_STATUS_OK, + HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, + HOT_SPOT_MAX_NUM_OF_SESSIONS, +}; + +/* + * Aux ROC command response + * + * In response to iwl_hs20_roc_req the FW sends this command to notify the + * driver the uid of the timevent. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @event_unique_id: Unique ID of time event assigned by ucode + * @status: Return status 0 is success, all the rest used for specific errors + */ +struct iwl_hs20_roc_res { + __le32 event_unique_id; + __le32 status; +} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ + #define IWL_RX_INFO_PHY_CNT 8 #define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1 #define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff -- 2.39.5